Broken link to Hob webpage fixed.
(From yocto-docs rev: 70f238f10641c20ab78314fe2bbb768560f31ea6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This whole section was very complicated and difficult to follow.
I have rewritten it to clear it up.
(From yocto-docs rev: 6ad1828eaa3e91b850696590cc732485a52f4cb6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some minor edits to the "Other Variables Related to Commercial
Licenses" section.
(From yocto-docs rev: 8f58836ce31f01135c139890d6edaad628015c62)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this was really old text and had not been touched since the
original poky handbook days. It was terrible.
(From yocto-docs rev: 4f3efdbf2920f7d3f2d0d0526d08340c6204856a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a couple cross-references for some general debugging
information within the manual set.
(From yocto-docs rev: d102e90fc9b24aa703eeb4488561058c258600d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a reference to the BSP Manual.
(From yocto-docs rev: f65c6d41bfe92c6bbc795982a1d1113e60cbf7dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3540
First pass at altering this section based on changed methods
and Jessica Zhang's instructions. Rather than fully removing a
couple of sections that have quite a bit of information, I
decided to comment them out for now. Once the material is
reviewed I can remove the sections for good.
(From yocto-docs rev: bde7771166a178dd283fc9baacbee5239c679251)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2568
Applied Darren's review comments where I could for his
review. Not all questions are answered but this represents
the third draft of the section.
(From yocto-docs rev: da0bc9542259238caf7b474bb15157d80a2b3651)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1548
Added a new section to describe how to install multiple versions
of the same library in parallel on the same system.
Also, I added some introductory text into the parent section
that houses the three sub-sections that deal with library
use-cases.
(From yocto-docs rev: c77538bc8adae90e4b900f129b63988fa3ab6c9e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1548
Created a new section called "Working With Libraries". This
section is a parent section for all the stuff about libraries.
Previously, there were two other sections dealing with libraries:
one was mulitlib section and one was about loading static
libraries. It makes sense to have a parent section now that
gathers the three sub-sections together. I have reorganized the
chapter structure to accomplish this.
Also, I placed some IRC chat notes temporarily into the new
section that will discuss how to load multiple versions of the
same library in parallel on the system.
(From yocto-docs rev: 5d150421bcd660a191aff63ebabd577cc19bd421)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various section heading titles were not using capital letters
for primary words. Fixed this up.
(From yocto-docs rev: da15d2ac3d043a0296a51d1a9fac69e7b4229f75)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new bullet as a tip for best practices that addresses
how we address bug 3071 and 3274. We are suggesting they enable
a PR Service if they are using continually incrementing PR values
when package feeds are published or used.
Reported-by: Richard Purdie <richard.purdie@linux.com>
(From yocto-docs rev: b90497f139b1b6f7ab5510313eb297d5d7fb4e68)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2827
Replaced the path where one findes the binary for the meta-
toolchain to a more recent example that was built from
the beagleboard and using arm.
(From yocto-docs rev: 020a7fcd7f99c50d32e831b8d51150e8db8ab4e9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the wording on when a user would consider using
the BBMASK variable. It is more suited for excluding things
that cause problems rather than for speeding up build time.
Reporte-by: Paul Eggleton <paul.eggleton@linux.com>
(From yocto-docs rev: 993d7c953a37747297238cd9af53a1f00e737df9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a danny-specific note here that did not apply to the
section any longer. I have removed it per Tom Zanussi's
suggestion.
(From yocto-docs rev: 2a3ccab263cfaa779a5182e6a4a7e534db253700)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the danny-specific note at the end of the
"OProfileUI - A GUI for OProfile" section per Tom Zanussi.
(From yocto-docs rev: b665be9ad906cdc3ac644e67151da3a2cc1acfd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With dylan, the two patches are no longer required. However,
the information to view traces still holds true regarding
using Eclipse's Juno. Updated appropriately.
(From yocto-docs rev: 90845677a37562b465bbd2bc849f773a2f54d92e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the distro name variable to "dylan" and the release
to 9.0.
(From yocto-docs rev: 4afec4519f3104f5a2e906f9ec4dfcca35d8000a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleared up some old wording that was confusing the build
system with "Poky". Also, added a note at the front of the
manual to be clear that the ADT is distribution-neutral.
(From yocto-docs rev: 52d090ab931e5cbeffc612b91c11dbb55db15297)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied two comments sent by Paul Eggleton.
(From yocto-docs rev: d3b61e07b5b9db6a582c76f66a984b9f27812a6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are basically Paul Eggleton's review comments.
(From yocto-docs rev: bb92dbb968013952c4308b9aeed48223f49c866d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The final paragraph of the "Creating Your Own Distribution" really
should have been in list form and should have some cross-refs
for other parts of the manual. The paragraph is now in list
form and there are some references.
(From yocto-docs rev: 02c4b2e99a3237d1506887659be0e67d6b000648)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a couple of notes to point out the ease of creating your
own distro and not just relying on a Poky distribution. One
note is at the very beginning of the manual and mentions
Angstrom as an example of a distro based on the YP. The
other note is at the beginning of the second chapter.
(From yocto-docs rev: 1525a5e34c615cbfd25aeb12cc7a27ef95b51eab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the "var-" part of links for the creating your own
distribution section.
(From yocto-docs rev: d419cd67084ce25d0d4b4437d8ce4cec180da59a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3403
Provided a note at the front of the "Adding a Package" section
explaining the exception when using a closed curly brace character
inside a shell function with the character at the front of a
line with no leading spaces.
(From yocto-docs rev: a1c0972083751444a8cc89aa8a026f273d98e23e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2645
Several changes to make sure that the default toolchain directory
(opt/poky) is understood as the default. I changed some wordings
to call it out as the default. Some examples I left alone as they
used /opt/poky but I clearly indicated that the example was using
the default installation directory.
I also updated the note in the manual that talks about alternatively
building the toolchain installer. Previously, it mentioned two
methods. I have added the third and most significant method that
uses bitbake image -c populate_sdk. This method creates a toolchain
installer that contains the matching sysroot.
(From yocto-docs rev: 2e5eeb7e0c9aa448149cc369572b31dbc1603e28)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #1622
In the introduction paragraph I added references to the three
multilib examples that are located in the meta-skeleton layer
within the Poky repository.
(From yocto-docs rev: f284525c6f9b655a61a0ac052a637b0aedb5b694)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
Applied several recommended changes for the section describing
best practices when using YP in a team enviornment. these
changes were from Dave Stewart.
(From yocto-docs rev: 7efc9864dc6757e3cf5c026f3c1785e5947cbfec)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
Applied various review edits from Richard Purdie. Additionally,
I ran a spell-check on the chapter and caught some typos.
I fixed these as necessary.
(From yocto-docs rev: 794a13d26bb7a9e268b16f809158a6af58cc3ce8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3274
First draft of a re-written section that describes best
practices for scaling the YP over a large development
effort. this draft is based on Richard Purdie's text
he sent to me.
(From yocto-docs rev: e5135f76946997a0a060dd16c0b62308be4f6048)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3684
These changes help tie in the relationship between how the OE
build system uses checksums and such and the PR Service that
can track revision.
(From yocto-docs rev: 39a3010a3bb4b2c1d37aef60984ac16e85b56aac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3728
The poky-db-pdf.xsl file has code that controls the font color
for the headers, footers, and separating lines for each when
the PDF version of a manual is made. I changed the values
from #cccccc to #999999 to darken these up so they can be
seen a little better.
(From yocto-docs rev: c9c83028a5f13dc672414b6ca395290f05019f8e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3552
Added some links to the FILESEXTRAPATHS and SRC_URI variables.
These links connect appropriate sections to a newly improved
section on FILESEXTRAPATHS glossary description.
(From yocto-docs rev: a58e7c6f013393c87381411f918e16a8f04d55d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2684
Applied some review comments to the section from Richard
Purdie.
(From yocto-docs rev: 772617a45df10e5e42364854fe03d8aad7cb46b6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #2790
Created a new section in the "Debugging Build Failures"
section to deal with host issues that cause a build to
fail.
(From yocto-docs rev: 9efc00146764086646b0c558d12168ab9813d683)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These types of links must not span multiple lines in order for
mega-manual to process them.
(From yocto-docs rev: bcea042cd796a51d866f82399b2fd0cc89ec9e2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
three PNG files go away from the eclipse folder due to the
renaming of the poky-ref-manual to ref-manual.
(From yocto-docs rev: 29907784ecb509b3d4fba633b2c4970e4105bea2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This commit adds the three *.customization.xsl files. I
(Scott Rifenbark). Split the commit because after applying the
18 patches, the list of stuff to stage was huge and I did not
want to add them one-by-one. So I staged them using git add -u.
Here is the general cover letter information from Timo included
with the 18 patches:
-----------------
Hi,
the generation of eclipse help files has been merged from the timo
branch to the master. Since the creation of the timo branch there have
been some changes to the master branch (e.g. new documentation,
renamed documentation).
This patch set does some cleanup for the renamed documentation and
adds eclipse help generation support to the new documentation.
01: Removes the 'the' from the document titles
02..04: Cleanup obsolete artifacts resulting from the merge
05..08: Add eclipse help generation for ref-manual
09..13: Add eclipse help generation for kernel-dev
14..18: Add eclipse help generation for profile-manual
Best regards,
Timo
(From yocto-docs rev: eff391a17d0a2403634adfb2f4cd2ff50ad0b771)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hi,
the generation of eclipse help files has been merged from the timo
branch to the master. Since the creation of the timo branch there have
been some changes to the master branch (e.g. new documentation,
renamed documentation).
This patch set does some cleanup for the renamed documentation and
adds eclipse help generation support to the new documentation.
01: Removes the 'the' from the document titles
02..04: Cleanup obsolete artifacts resulting from the merge
05..08: Add eclipse help generation for ref-manual
09..13: Add eclipse help generation for kernel-dev
14..18: Add eclipse help generation for profile-manual
Best regards,
Timo
This patch set originally contained 18 patches. I (Scott Rifenbark)
had to push these changes as two parts. This is the first part.
It does not include creation of the three cusomization files.
(From yocto-docs rev: 9b1889f6e31ee70dae704fa08763fb9196616dad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I placed a link on the term "Cross-Development Toolchain" in the
section of the same name. This is to help the user see the
recipes related to the toolchain. The link resolves back into
the "Terms" section of the dev-manual.
(From yocto-docs rev: c77ec0212bcf3b1c5f8079ccf08129ecbefea0aa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bulleted list to the "Terms" section to help define
some toolchain recipes such as gcc-cross-initial,
gcc-cross-intermediate, and so forth.
Added a cross-reference link to the term
"Cross-Development Toolchain" in the the "Working Using
Stand-alone Cross-development Toolchains" section.
This gives the reader a way to see more on the toolchain
recipes.
(From yocto-docs rev: 2cb612424c0cf6addfd8bce8a0ef77665c35bd9a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The user needs to have YP 1.2.2 release or forward for the
examples in the book to work. I have added a note indicating
such.
(From yocto-docs rev: 6fcbd3f526a13ef632c7ce5b9b4774d166b61895)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3838
First draft of edits for this class. Removed specific variable
definitions as they are now deprecated. Added a general
explanation of the variable functions. Pointed user to the
commented code in the actual class for details. Removed
statement saying that the build system supports only one
binary per package.
(From yocto-docs rev: bd574f2c8a95470c5a44500b70743a6e039522b7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the question that asks "How doe the OpenEmbedded build
system obtain source code and will it work behind my firewall
or proxy server?". Some of the variables did not have links
or proper font type.
(From yocto-docs rev: be1f665b480a47483595381c9a837892100007e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
added links for the PREMIRRORS and MIRRORS variables used in
the description.
(From yocto-docs rev: 1ec0f9cbeebeaeaadee8cc8b3631e6194c013a2f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section that describes an efficient way to set up the
build system to look in local areas for tarballs needed updated
so that PREMIRRORS was not the focus. The example used does
not even employ PREMIRRORS. So I changed wording to support
the example. I also added a mention of the PREMIRRORS variable
and a linked reference to it for more information.
(From yocto-docs rev: 7966942e2dfad85c2eb9480d7f706355871c40ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Received a patch from Robert P. J. Day but deleted it from
my Thunderbird account so could not apply it directly.
I applied most of his corrections. A couple I left alone.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 2cadd5265fcb5cc281c22ccae81260a6633229e2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3664
Added some information in the note to point out that not all
append files add files into the mix. Some just exist to add
build options. And, in this case the _prepend part of the
FILESEXTRAPATHS statement is not necessary.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 388c441341006227be2f9e7d42bb1c509c32790d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 3272f0d51e3d09f4ffd96b7322f66ffd878d3714)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two things fixed:
1. A couple examples for setting up a layer.conf file were
using the meta-yocto configuration file as an example.
Turns out this is a bad example because the BBPATH variable
is appended to the LAYERDIR when setting BBPATH rather
than the other way around. That is because meta-yocto
is a distro layer. BSP layers, however, are not distro
layers and are the norm here. So I switched up the way
BBPATH was set and actually called out meta-yocto-bsp
config file as a template.
2. Added a link for the BBPATH variable in the
FILESYSTEM_PERMS_TABLES variable description in the
glossary. Just happened to notice this so I fixed it
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 1a594b6dde1a494a5f7322b510e1e67d23635298)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662
I added more information to the variable desription in the
glossary for BBMASK. The information included a bit more
syntax information as well as some more complex examples.
I added more reference information to the "Excluding Recipes
From the Build" section to help better describe how the
BBMASK variable works.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f10f43a543e7b0892863e165d2902741a8823009)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed YOCTO #3662
Updates to the description so _prepend is used to add paths
to the front of the search order and use of the variable
without _prepend just adds paths to the end of the
FILESPATH order.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 44c98058c1a75a9e6c95e4f33dbe1696e23d97d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3662
New entry added.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 73f8b28f6b6cea16cf63b99db88c961f87088fe1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The chunk.quietly option disables the output of the docbook
chunker. Creation of a new html file is now longer printed to the
console. This provides a much cleaner output of the eclipse makefile
target.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When calling the eclipse target twice without calling clean in between
the figures folder was copied as a subfolder of the existing figures
folder. This patch fixes the copy command to correctly copy the
figures folder.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The script tools/eclipse-help.sed is used to convert links that
point to other documentation parts. This avoids having to leave
the eclipse help center when clicking these links.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file is used when creating eclipse help html files. It processes
all html files and converts links so that the user can navigate
between different docuementation parts without leaving the eclipse
help center.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the yocto-project-qs. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The fake title section is converted into a docbook
article.articleinfo. If used with a custom title page this will lead
to the excapt same output. But I will enable the creation of metadata
from this title information.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the yocto-project-qs using
the yocto-project-qs-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The quick start guide is currently not using a title information to
set the title of the document (e.g. article.title or
article.articleinfo.title).
As other output formats may use the title information to create
metadata this information has to be added to the document. To preserve
current style of the document a custom title page has to be used. With
this for instance 'article.title' can be used instead of the
fake-title section currently used, leaving the style intact.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the poky-ref-manual. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the poky-ref-manual using
the poky-ref-manual-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the kernel-manual. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the kernel-manual using
the kernel-manual-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the bsp-guide. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the bsp-guide using
the bsp-guide-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the dev-manual. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the dev-manual using
the dev-manual-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eclipse help documents are now created when calling the 'make all'
target on the adt-manual. Resulting files are archived into
the tarball as well. When calling 'make clean' artefacts of
the eclipse documentation build are deleted.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of the document used to create metadata for output formats
such as eclipse help.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This target will generate eclipse help for the adt-manual using
the adt-manual-eclipse-customization.xsl stylesheet.
The output will be generated to a separate directory which can be used
for integrating the documentation into eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This stylesheet uses the eclipse stylesheets of docbook to create
eclipse help from this documentation. In addition to simple html
files these stylesheets will also create xml files which are
needed to integrate the documentation into eclipse (e.g. toc.xml).
Additional parameters are required so resolve links between different
documentation parts inside eclipse.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Standard stylesheet parameters were moved to the docbook customization
file tying them to the docbook stylesheet used. Removing these
parameters simplifies the Makefile.
Furthermore supporting new output formats can now be achieved by
creating a new customization file containing its corresponding
parameters. Parameters that are used across different stylesheets with
different values will then be separated through different
customization files.
Global parameters can still be set through the XSLTOPTS variable since
this precedes the parameters in the customization file.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The title of a pdf document is part of the image used on the title
page. Thus the title defined (e.g. bookinfo.title) in a document
should never be used when creating title pages for pdf documents. As
other output formats may use the title information to create metadata
the title has been removed from the template.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated a couple spots in the manual to be clear on meta
not being a strict requirement for a layer name.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ffd80ade292a462a77981c8c19bb71a19333a397)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3661
The value for FILESPATH was incorrect. I have replaced it with
the value found in base.bbclass.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: bc100cdd1bec48a65fcc4bed281f42953b1c9077)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3663
I added wordings to indicate that meta-intel is not required
to create a BSP layer. But, the example presented uses
meta-intel.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 746948cd1d612f0b837e70a7e92e4081d379cb50)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Part of section 5.15.1 incorrectly implies that only copyleft
source will be archived to the specified directory, when in fact
copyleft filtering is disabled by default.
(From yocto-docs rev: 8eacef8acc398bc3d881d657d27c8827f05e3227)
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example doesn't account for an extra level of directories
that organise the sources by machine type.
(From yocto-docs rev: 844e8b8f28ab765e59fdbee40e00c973b1b00d89)
Signed-off-by: Kevin Strasser <kevin.strasser@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes YOCTO #3684
Updated the section that declares what the default BB
Signature Handler is.
(From yocto-docs rev: e4c64add4a54e5583bf88fc71f00c90f7a1f6440)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No longer including the Yocto Project Kernel Architecture
and Use Manual. I removed the lines that included this
manual as part of the mega-manual.
(From yocto-docs rev: 69fa3cc4a07fc471fc869a81ff2545d62b63286e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I took out the logic that built the old YP Kernel Architecture
and Use Manual. This manual can no longer be build. It is
being retired.
(From yocto-docs rev: 8d5b179995e561deb94572150e904da5cd4dec19)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "-dirty" String section from the old YP Kernel Architecture
and Use Manual was moved to section 2.3 of the manual. It needs
to find the right area to be put in (AR for Darren). I added the
AR text to the top of the section so it would not fall through
the cracks.
(From yocto-docs rev: eaa5b86643572a6c74028dc3330625a0bfbca50e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A Section about seeing what has changed in a kernel tree
was moved from the old YP Kernel Architecture and Use Manual
to this new manual. The section moved was "Change Inspection:
Changes/Commits". In addition to moving the sections, I
shortened them up by removing verbose parts of the section.
(From yocto-docs rev: 2c620ea2bed0844b70b497dfa461c0b364312e39)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New appendix required adding the kernel-dev-maint-appx.xml
file. The contents are sections 3.2 and 3.3 from the old
YP Kernel Architecture and Use Manual, which is "Tree
Construction" and "Build Strategy." According to Darren Hart,
this information should be retained for the few people on
the planet that might ever need it. In addition to adding
the new file, I had to add the bits to the kernel-dev.xml
manual to support including the appendix when making the
manual.
(From yocto-docs rev: b25e40308080c59c6700e1dce8ebf6a9a2dafbcc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the "Kernel Architecture" section from the YP Kernel
Architecture and Use Manual to this manual. The section
included the kernel-architecture-overview.png figure. So,
I added that PNG file to the "figures" folder. Finally, I
had to also add the PNG file to the Makefile tarfile list
for kernel-dev. Note that because the figure was part of
the old YP Kernel Architecture and Use Manual, I did not have
to add the figure to the mega-manual tarfile list.
(From yocto-docs rev: fbc5508ce162ea7915fd5dce74338b6a5bfd7ce1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added bits to support building the new kernel concepts
appendix.
(From yocto-docs rev: 6d372bd12288142b09c729f877c1e894f11c7c27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The concepts in three bulleted items in the old kernel manual
need to be present in this new manual. I put in a bit of text
right at the beginning of the manual in the form of an AR for
Darren. This will eventually be removed, but for now it is there
so that it won't slip through the cracks.
(From yocto-docs rev: 85b7300df30837f72d936f8ec1af0b2a4a9c1a88)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Put in a cross-link to the new YP Linux Kernel Development
Manual up in the introduction.
(From yocto-docs rev: ba00acb1a0db9494b0d0ff1335f2532b5e2a7994)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I went through and got rid of all references to the old
YP Kernel Architecture and Use Manual and replaced with
appropriate references to the new YP Linux Kernel
Development Manual.
I also laced in appropriate references into various sections
of the new YP Profiling and Tracing Manual.
Also, updated the list of resource manuals to reflect the
new manual set (addition of kernel-dev and profile-dev and
removal of kernel-manual).
(From yocto-docs rev: ef531ad65c9b749dad5e8e39b060bf1641e4fa38)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some cross-references to the section that overviews
the user-space tools. Three tools (perf, oprofile, and
systemtap) are in the list. I added appropriate cross
references to the respective tool sections in the YP
Profiling and Tracing Manual.
(From yocto-docs rev: 9b1ee95fa9dd4110f5b4f9e7aeaba63c6ef8b148)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Many links added to the glossary variables that were introduced
in the manual.
Also provided general edits as I found them.
(From yocto-docs rev: 1c004144669306e87ad783df766b5245e474f549)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also put in a cross-reference in the existing KERNEL_SRC
variable.
(From yocto-docs rev: 705074a16490155cd64469af3b2ea12a0780281c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the "Terms" section, I enhanced the "Metadata" term to include
a bit about Metadata in the context of the kernel. This type of
metadata is discussed at length in the YP Linux Kernel Development
Manual.
(From yocto-docs rev: c6f48bc4c33850eaa1dbf5867759a19d373766ce)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. LINUX_VERSION_EXTENSION: Added a link on the
LINUX_KERNEL_TYPE variable.
2. Added a new variable description for the
LINUX_KERNEL_TYPE variable.
(From yocto-docs rev: f4ace3c64838044e2eb700af4b024a96ab1e2315)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied Darren Hart's review comments. Namely, use the
example from the linux-yocto recipes and not the custom
recipe.
(From yocto-docs rev: 4a537a02bbf6fca4ff1a3beddd03d8115099cddd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a bit about the variable being used to define PV for the
recipe.
Also, fixed a couple indentation problems with some nearby
variables.
(From yocto-docs rev: bec65049218c9c549fe8cd4d5c16e9d917e87866)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Took them out of the colored Note format and replaced with
a simple line box to set them apart.
(From yocto-docs rev: 5efb84d3860d87f64371b718967ab33f47a3a4db)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed "Line" to "Live" in the section heading.
(From yocto-docs rev: 73ea1f5a01891aa51c872363a60d2e0eefdf2f64)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the list of 32 profile-manual figures to the tarfile
variable for mega-manual.
(From yocto-docs rev: ffe0586990c7659c28001038d6ba55cd42f5ecd0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figures from the profile-manual/figures folder must be
added to the mega-manual/figures folder in order for the
mega-manual to make correctly.
(From yocto-docs rev: f64459330b472dbade936f9d964b4792fb6364bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No re-writing at all.
(From yocto-docs rev: c18bd94ac0e6fc3a23139ec8d1ef7b04518746de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No re-writing at all.
(From yocto-docs rev: 6ed32ad5daa1f16c414da665a2fea498baefbe4a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No re-writing.
(From yocto-docs rev: e3fd833c4bf7cdc50138ac940af8a2b35c37c52b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No re-writing at all.
(From yocto-docs rev: f42230e3665903a7603212696949241244555f8b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No re-writing at all.
(From yocto-docs rev: 4ca472f8200f9d927a8d37c88c1ff75b017fcfc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No re-writing, no clean up what-so-ever. It is simply in the
DocBook form.
(From yocto-docs rev: 3d2c17c076b67c3e2ab094d0562038e422b63d44)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had the sectioning off and it was preventing the manual from
making. I also added more indentation as needed throughout
most of the manual up to the error.
(From yocto-docs rev: 5de3544593a63e96b349babc177970d8605e0098)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This adds in the figures under the correct spelling for the
"figures" folder.
(From yocto-docs rev: 83d7896623a9a88538dd1da45429f47777123338)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Initially the 'figures' folder was mis-named as 'Figures'.
this is not in line with the other manuals. I had to rename
the folder and thus delete all these files from the Git repo
since they had been committed.
(From yocto-docs rev: 4452e790e8ddb8c80a5f0c6faf4a1f86fd3fb8d7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to change this file to work for the profile-manual.
(From yocto-docs rev: 60a52fb31f2d15709afa29e83aa5d50bf8d90c58)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Finished entering the rest of the "perf" section.
(From yocto-docs rev: 3df34a299ef9656362bf5b851b575528c646c02b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Started to put in the usage chapter. Adding text and
sectioning off by paragraph and formatting for literal
sections.
(From yocto-docs rev: c2d328d19023cd6fac6dcaeb8449e2203b5a17b7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put the raw text is for chapter 4. No editing.
(From yocto-docs rev: e4a017624595394f86f469e15c1c8ad13e82206d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the raw text from Tom for the architecture chapter.
No editing at all.
(From yocto-docs rev: f402cc14ac7fef30460e130cc5bdfca731886aa3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this text is straight from Tom's wiki. no formatting
no nuthin'
(From yocto-docs rev: 95f5341169c3e8d3bd7a97740320d0d27cbee020)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added four chapters to the directory. I based these chapters off
of an existing YP manual. I also updated the .gitignore file
so that it will support ingnoring profile-manual make operations.
(From yocto-docs rev: f9658f627fe9d8d6868ce74e9550ea16d23c4156)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added links for the LINUX_VERSION, LINUX_VERSION_EXTENSION,
and SRCPV glossary entry terms.
(From yocto-docs rev: be6c716f436a631e97f8a429aa9b2d2fa75816e5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed all the orginal text.
(From yocto-docs rev: 8a3b11fb6936574edb4fd0daf60d21ee2c2ccd8f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the block of original text.
(From yocto-docs rev: ff36ef73cbf50b966bf539b013260fb7c668d82e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the original text.
(From yocto-docs rev: 0f3e89c7e6b8249cd643822f33c8168ca7cd83c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Final tweaks to this list of variables.
(From yocto-docs rev: d494c8b06a623ef4930e206dd8e5689c8a9d4923)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the name of this section to be consistent with "doing"
something as the rest of the chapter is action-based. Did
some other minor edits. Also, removed the original Darren text.
(From yocto-docs rev: 3be86ee72766207c3812245917b8b20af86b26f4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits added a couple cross-refenences back into the YP
dev-manual where detailed examples of patching and configuring
the kernel exist.
(From yocto-docs rev: 1ae2a18f0367841d1ea9bb8d3f3d323a9b573533)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fixed up the organization of how you modify a recipe. It can
consist of three things. I have created a new subsection for the
first item, creating the append file.
(From yocto-docs rev: a8342ccf18c0406669f6983da31d38603d87921e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Second pass through this section. Also removed the original text.
Switching to numbered list.
(From yocto-docs rev: 7978c5acd4776e6ade7c0ee34c6f7ab58eeb2bb9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the name of this section and took out the bit about
the manual being written with the assumption of a custom
layer being created. The manual does not particularly call
this out with any examples so it is not needed.
I pulled the copy of the original text also.
(From yocto-docs rev: c7623d96ed2d9c5866e52842f8cfea2ebde95d0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A serious pass through this system to reorganize it.
(From yocto-docs rev: f13abc59730d78e5ffa5bce3d38519f8fc4c127f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sections for "Machine Branches" and "Feature Branches" really
should be encapsulated within a section on branching. Much of
the text in the "Machine Branches" section presents the rationale
behind both types of branches. I have created a larger section
to contain these and will edit the text to fit.
(From yocto-docs rev: c7c67f5867f22ebbbd49cab79bb2d4e52422ecac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Three instances of *.scc files were recursively including themselves.
These .scc files needed to have their names changed to a file
that indicated hardware support only.
(From yocto-docs rev: f1c347f8f63141807084ac0a2bd3b64e138315cb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First re-write of this section. Terminology is an issue here.
Dumping the term "ktype" for good.
(From yocto-docs rev: e5ee05c5bfec2a0c62b89245efbe248a66b66288)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First real re-write of this section.
(From yocto-docs rev: 636a852d4748904df6794bef391f7f5ef3db3c0f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
first real re-write of this section.
(From yocto-docs rev: 09a9d0978d939f40782179f9fd46ccd7b999c262)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First real re-write of this original text.
(From yocto-docs rev: a6d16b61057df8ed811cf1f5f27c5f9e08be1108)
Signed-off-by: scott-lenovo <scott-lenovo@ubuntu.(none)>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First real re-write of this section.
(From yocto-docs rev: 41c79da0832c0b290b21cc2aff87091d7243fafa)
Signed-off-by: scott-lenovo <scott-lenovo@ubuntu.(none)>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the first serious re-write of the text from the
original. Edits to make it more readable.
(From yocto-docs rev: 21c77fdfc9ae1a02b1d02fb113324c96c6aecb5e)
Signed-off-by: scott-lenovo <scott-lenovo@ubuntu.(none)>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First real pass at cleaning up the text.
(From yocto-docs rev: a550e96780b5be191a576bbb20ef28a36b20e0bc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits to clarify the writing.
(From yocto-docs rev: 0510ab0faf81e0ac1c931863337eb217581c66ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did some re-writing for better understanding based on what I
know.
(From yocto-docs rev: fc3adb037ac07a90dfbba6b76643391480e0bce5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
General edits for readability, etc.
(From yocto-docs rev: eb52c743ad0fba7859ee4800f12981294aa71b23)
Signed-off-by: scott-lenovo <scott-lenovo@ubuntu.(none)>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also put in the initial text for the next section, which
is "BSP Descriptions."
(From yocto-docs rev: 0c9b0475d9c1a97c7b00df325dad0c830e30444b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Changed "poky-ref-manual" to "ref-manual"
2. Inserted new lines to support "kernel-dev" manual.
(From yocto-docs rev: a134992633572c0b006ae73d47512be89d13ba8e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The version changed from 1.3 to 1.4. The poky-ref-manual changed
to ref-manual. And I added the new kernel-dev manual. For now
I am leaving the kernel-manual book. Likely it will be replaced
later.
(From yocto-docs rev: 3df7476724c96e97f309118fb6d906a999414093)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The raw text for the second chapter is in by section. This has
no formatting whatsoever. I also edited the Makefile so that
the new "Common Tasks" chapter would make as part of the manual.
(From yocto-docs rev: 68bcc1e977fbdd7b1a4b448171d1149edc72db51)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added in the variable YOCTO_DOCS_KERNEL_DEV_URL as a placeholder
for the variable used to resolve to the published manual. This
will need changed when we decide how to retire the existing
kernel-manual.
(From yocto-docs rev: 0a42af6c02b3fc6ebcad5be47d69c66ff0ced7ac)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes were to the intro chapter to introduce the DocBook
form, the Makefile to introduce the new manual, the figure used
for the title had to be updated, the root manual .XML file needed
changed, and the style sheet.
The manual now makes with just the raw text for Darren's intro
section.
(From yocto-docs rev: 1bceb7bdd4fe5773c11c7ddbdae00554680bbf6d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day suggested adding http://lists.yoctoproject.org/
listinfo to the list of mailing lists, which included yocto,
poky, and yocto-announce.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: f322c60814471e4216e112b193e5769fd6008a79)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
1. Added "Debian" as a distribution for best results.
2. Fixed a link to the Hob page and two links for the
Build Appliance.
3. Three typos fixed and a few grammar items fixed.
(From yocto-docs rev: 0b381094ed9cc2d66895d4ad7c63005c8a918eb1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this still had the "poky-ref-manual" string in it. It needed the
"ref-manual" string.
(From yocto-docs rev: f771aaa09bf439e506dc5d8573a34283a1a905fb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Substituted "1.4" for "1.3". Substituted "dev-manual" for
"poky-ref-manual".
(From yocto-docs rev: b0b92c85f402c2280312ed909f4c4b976da28c54)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Had to change 1.3 to 1.4. Also had to change poky-ref-manual
to ref-manual.
(From yocto-docs rev: e0448415218bacc7ce6555cad47e60a2dc7fc287)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One of the examples used "startline" instead of "beginline".
Correction made.
(From yocto-docs rev: 1ed3ae72b0492e03b37dc2c9519cf37209a7034b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the old poky-ref-manuals from the new ref-manual
structure.
(From yocto-docs rev: b5db4ddea205875ed3acacb90f46efd557337e0d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the variable to use "ref-manual" instead of
"poky-ref-manual" to support the new folder name for the
YP Reference Manual.
(From yocto-docs rev: 9dc6ff494c6841cb4830b6932a2b5faf4645ba98)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates to allow the reference manual to be built as
ref-manual.htm and ref-manual.pdf.
(From yocto-docs rev: 2bac348d4f4c5e7385fc4a250d1f40f070edb15b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing the folder that holds the YP Reference Manual to be
"ref-manual". This will help with confustion over the manual's
intended purpose.
(From yocto-docs rev: 1106442964b5080cb0b6b3bd3af32e9407c0f7c1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file structure beneath WORKDIR has changed such that
PN and PV are now separate directories. This affected several
areas in poky-ref-manual.
(From yocto-docs rev: 52b033c2c9e5aaa1f03072dd16c21a9d59a87150)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The STAMPS directory is now structured as
build/tmp/stamps/$MULTIMACH_TARGET_SYS/<extended_PN>/$PV.
There were three areas in the manual that needed adjusting
to reflect this change.
(From yocto-docs rev: 1f8d64ecfa8e060680a90f9c6cc5f69554328da5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated a note that points the reader to the maintainers list. The
note in the master branch pointed the reader to a nonexistent (old) file.
(From yocto-docs rev: d947d6d9bd42562a84ad3ac90e4c2052f421119c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3176]
Several places throughout the YP manual set examples are given
for the bblayer.conf file. For release 1.3, a bug existed that
surfaced when a user removed either the meta or meta-yocto
layer from this configuration file. The bug has been fixed and
the ripple effect through the YP documentation set affected
several manuals.
Fixes include updating the code samples that show bblayer.conf
so that they now include the BBLAYERS_NON_REMOVABLE variable,
a new glossary entry for the variable, and an explanation of
both BBLAYER and BBLAYER_NON_REMOVABLE in the section that
talks about the bblayer.conf file.
(From yocto-docs rev: 904b9ec1cd6d823af0e92f6891fc7e434cf2e358)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clean operation should also remove the *.tgz file. I added
code so that if the user makes the file and specifies the
'clean' target, the generated tarfile is removed.
(From yocto-docs rev: 565c147eaa169e287278b87e9bba2979a44be9d5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
White space at the end of a line in the DocBook .XML files
presents a problem for certain Git commands. It evidently
shows the white space as red-highlighted errors. I have removed
the white space from this concepts chapter.
Also, fixed one grammar item.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: dd0ab98a655ae61008d18cef44940622a901c9f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 0fc811748fce26f9c14791a286742905b51e77a6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3327]
Applied some edits to make it more accurate based on
Paul Eggleton's review comments.
(From yocto-docs rev: 94c15c9550fba77a2ab079502a62916357de0cf5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3327]
Re-write of the glossary description for the
PACKAGECONFIG variable. This went through a couple of
iterations. Paul Eggleton reviewed and provided
technical information.
(From yocto-docs rev: 7edf3d03bc4a448516f24caea4b49423a026885f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2843]
The poky.ent file has variables to list the essential host
development system packages required to build a headless
system. The OpenSUSE distro requires python-xml. I also
inserted some carriage returns and line continuation characters
in the strings for all the distros so that they are formatted
better in the resulting manuals.
(From yocto-docs rev: addbd0da1a35addcdd8a3d1bdf3812db68d96b2f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3445]
Updated the "Installing the Plug-in Using the Latest Source Code"
section for the Eclipse section. This was pretty much out of
whack. I have created new steps that involve running the setup
script and then running the build script. The new information
still needs a review.
(From yocto-docs rev: 5903964a9583c6051abefa4a7b944b59a76825b4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3274]
I have added a new area at the bottom of the current
"Using the Yocto Project in a Team Environment" section.
This section is the spot for addressing what Richard Purdie
coined as "How to use YP in a work group." For now, the
changes are based on the information that Richard placed in
the Bugzilla entry. Presumably we can build on this information.
(From yocto-docs rev: 92c5d1b6ac6b553fab19410170364dca40123c59)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the example to match the more elegant solution
provided in Robert P. J. Day's wiki.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 209d6205b4fc6a4010f440ba7e0e2018217a0a0b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Applied a few changes based on Paul Eggleton's review
of the section.
(From yocto-docs rev: 54c2b1577ba062e09a8df14767257147e33a939f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3292]
Added a bit to the start of the Features chapter to give the user
a method they can use to discover recipes that are checking for
features added to the image.
(From yocto-docs rev: 261cc16ad900f7f5254fa97dab82beab94f717d3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two links to the wiki were pointing to diff pages and not the
actual pages.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 7339ea7b0a3869570c9097146a49dfd758527197)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Updated the "Using a Development Shell" in the dev-manual to note
that the OE_TERMINAL variable is the thing that controls what
terminal is spawned. Added a reference into the new
variable description.
In the poky-ref-manual, I created a new glossary description for
the OE_TERMINAL variable.
(From yocto-docs rev: 25001eba312c4109b4aaa79b334d27e144ef0d3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2909]
Updated the section on using a development shell
(From yocto-docs rev: 37b43dcb19dda747b7e90ac2e393dad29e9d87a5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3292]
Provided a specific example for how adding a feature through
the MACHINE_FEATURES variable can affect the build.
(From yocto-docs rev: a768c88c73ef15a1e40e2547b6bb12ef276472b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3292]
I added more detail about the list of machine and distro features
to the introductory paragraphs of these sections. This information
came from Paul Eggleton.
(From yocto-docs rev: a032f8e49222f6b628eb7d337b967da51a3d7581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3292]
Partial fix for this bug.
(From yocto-docs rev: 300d23b29d8abf236cbfa6f2630322c58ca67854)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Applied some review comments from Paul Eggleton on the new
build history section. Some minor re-phrasing.
(From yocto-docs rev: 986b0e7d2a79141d7c8dea0062cd25970a74fa57)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-ran this using Danny and the configure.in command does
not need a AC_CONFIG_HEADERS statement so I removed it.
Also fixed a typo for the touch command s/ChangeLog/ChangLog
(From yocto-docs rev: 51aab0d5af1067f4144dacd3e53964aa6e00c2b0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example configure command did not have the correct shell
syntax. I changed it to "./configure".
(From yocto-docs rev: a14ab06b78248cbf7caead26ee27a9d23e75d2ef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2645]
In the section that describes how to build a toolchain using
bitbake meta-toolchain, I updated the note about the MACHINE
and SDKMACHINE variables. These needed to be pointed out
to the user as important variables for correct settings
before generating the toolchain.
I added a new section for the autotools-based programs that
now includes a simple "Hello World" example. This section
precedes the section that describes how to pass host options
to configure.sh.
(From yocto-docs rev: 9849e7b94d42a851f30f0fba8ae60916697956dd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3364]
Added information about the default behavior for the
BB_DISKNOM_INTERVAL variable.
(From yocto-docs rev: db1c6c4e9cd749109580aa6b135f6f84f3fe652d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3366]
Created a new section titled "Handling Optional Module Packaging"
in the dev-manual. This section is based on the wiki page
that Paul Eggleton authored.
Created a new glossary entry for PACKAGES_DYNAMIC in the
poky-ref-manual.
(From yocto-docs rev: 5af3da5e2af15c33e5e6eb7a9ef3ab3c0923284f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3396]
Spaces in file and directory names is an issue for the build
system and throws an error when sourcing the environment
setup script. I added key notes in several areas of the doc
set. I also added some cross-references to the oe-init-build-env
section in some other areas where running the script is discussed.
(From yocto-docs rev: 1d102e91ba77391096749bd7df6c05b2b695b33f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added variable descriptions for BB_DISKMON_DIRS and
BB_DISKMON_WARNINTERVAL. These went in the reference
manual in the glossary section. First draft for both
descriptions.
Also, updated the Makefile to include two new figures used
in the Build History section. The figures needed to be added
to the TARFILE variable so that the .PNG files are included
when publishing both the poky-ref-manual and the mega-manual.
Added two figures to the figures directories of the poky-ref-manual
and the mega-manual. These figures are part of the new Build
History section. Anytime you add a figure to any manual you
also have to store it in the figures directory of the mega-manual.
(From yocto-docs rev: bbf68ed28ba8660af34d4cae146fb172ca4e681e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
First draft of this new section. Information based on Paul
Eggleton's wiki.
(From yocto-docs rev: b459d68ab7dd51b258fd378ad15260cba4522dc4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I improved the wording such that it is not confusing between the
information in reference manual's section on running a build and
the general overview presented in the YP Quick Start.
(From yocto-docs rev: 17e2fc34941612589b8ddf3314a4760e9c2f402d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The note alerting the user to required host development packages
necessary for ADT installation and use was antiquated and did
not point to the new structure, which is in the YP Reference
Manual. I updated the information.
(From yocto-docs rev: edced821838391315fb2f12488cffec9f08eb78c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to the poky.ent file to change the three variables
needed to build manuals for 1.4.
Made new entries in the manual revision history tables for the
five manuals that have them. Each entry shows the "TBD" release
coming up.
(From yocto-docs rev: f7f75a238d709698f1582ce22e209c09ee60581b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed used of "Source Directory" and Build Directory.
(From yocto-docs rev: a4d79c5a7e73003fc99c274d876fbea453a80d20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
various changes as required.
(From yocto-docs rev: 7f166508337c9d4aadad23997470a8871c5e42a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made minor changes as needed due to some new sections, links,
and capitalization standards.
(From yocto-docs rev: bc966e5a78dadd14ecf1896a36e40a9b256bae77)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated some example text based on the latest source
repositories for crown bay. Replaced fishriver example with
fri2. Updated some capitalization usage for source directory
and build directory.
(From yocto-docs rev: 65973f7b30699fbb82b4d7f1b907e947489ba7d0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made some minor edits to the book before locking down the
files for 1.3.
(From yocto-docs rev: 2b941103585a31b5dbcb65b784cc3381467ed697)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed a few references and links. Also standardized on the
capitalization for the term "Source Directory" where it
refers to the YP poky structure on the development machine.
(From yocto-docs rev: 1a20418d8791d754ad66c5a059e65bd68a4c6b32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the sections on the "Git Workflow" in Chapter 4 and
the "Patching the Kernel" section in Chapter 5 per Tom
Zanussi's review comments. Minor technical changes.
(From yocto-docs rev: fd8a291349c06328adebd37f8a9bbeaa49adb44c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the DISTRO_EXTRAS_RDEPENDS variable to the glossary and
updated the DISTRO_EXTRAS_RRECOMMENDS variable per Paul
Eggleton's review.
(From yocto-docs rev: bb27fcb3b990bb335176d5da9fec420fdc31bf22)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this figure used to be at the end of the development manual.
I have removed it from both figures directories and taken
it out of the TARFILE list in the Makefile.
(From yocto-docs rev: ad8fcfc4bddb6bcee0e1a4ece78cd87ab0d51b6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Suggested changes to help clear up what the list of items
in each of these variables should be and how automatic
handling of libraries is dealt with.
Richard Purdie reviewed the changes.
(From yocto-docs rev: 53865f904d5d4675286419a57bbb9282edfc1d0b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some final edits to these two variable descriptions from
Paul Eggleton.
(From yocto-docs rev: b606eed0f6a326ef572cd831b642312bb827a8c5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Final edits (I think) to this section from Paul Eggleton.
(From yocto-docs rev: 95fd830ffb668109631205df4538454ccf023b20)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the MACHINE_FEATURES_BACKFILL,
MACHINE_FEATURES_BACKFILL_CONSIDERED,
DISTRO_FEATURES_BACKFILL, and
DISTRO_FEATURES_BACKFILL_CONSIDERED variables to have
more comprehensive information.
(From yocto-docs rev: 355eb3ebe02fbe4a340adaf83bf29a46f7c8230f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did some re-wording on the WiFi example in both the
MACHINE_EXTRA_RDEPENDS and MACHINE_EXTRA_RRECOMMENDS
variables. Clunkiness fixed.
(From yocto-docs rev: 0c76ae0ee14cce62ff02b728b1c9ac21f4f3b385)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sections that list the features you can provide with the
MACHINE_FEATURES and DISTR_FEATURES variables implied that
the set was finite. It is not. I added wording to that
effect.
(From yocto-docs rev: d8e79fdf909ba5586dc45320b7cca03de639f49b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed wording so that the lists of features do not seem
to be finite. But rather, the set shipped with YP.
(From yocto-docs rev: 68e1eba075819863d8137be0b4c70935b88cb1a3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did some editing that helps clarify variables that deal with
the MACHINE.
(From yocto-docs rev: f1f63acffc952cc7d755fc6dd555379572fddaf0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For consistency.
(From yocto-docs rev: 7b51db2d3409d6a9c74a7a9b0b2cc39cf6622033)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the BB_NUMBER_THREAD and PARALLEL_MAKE variables into
the description for suggested variables to set if you edit
local.conf.
(From yocto-docs rev: 7345bbf6c10b823e6364e85a4e75a7ec60a29aef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3262]
* Added correct information to the STAMP variable glossary
entry.
* Created a new variable glossary item for the
MULTIMACH_TARGET_SYS variable.
* Created a new variable glossary item for the
EXTENDPE variable.
Reported-by: Patrick Turley <patrickturley@gamestop.com>
(From yocto-docs rev: ea50e41dc71d3876dd1b00aeec663400ac4a5ced)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updates to the Git Workflow section based on feedback from
Darren Hart. These changes simplify the flow and make it
generic.
* Updates to the lttng user space tool used from within
Eclipse. The legacy version of the tool is no longer supported
so it had to be edited out of the description and replaced
with the 2.0 version.
(From yocto-docs rev: 81d2b79035fc99f92364bfef2c76076738cbaa52)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
One change resulted in changing out "include" for "require"
in code from the Crown Bay example.
(From yocto-docs rev: 69b21d5f62ad9020646a26ce13d349af50aee419)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Several variables are no longer needed in this section. I have
removed them.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: b627269d18d9c8b4342f8465966d780756ff5a22)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Feedback from Paul Eggleton suggested to not use the linked
term "Source Directory" in the last paragraph of this section.
Reasoning being that it is mis-leading in this case. People
reading this will be thinking more along the lines of traditional
source code rather than our establishe "Source Directory" term,
which in the doc set refers to either the unpacked poky tarball
or the cloned poky Git repository.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: f9bfcdebf85481839df01442ee81c4c9e8ee559a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note explaining why "PATH" is needed when using
SSTATE_MIRRORS if the shared state directory structure on
the mirror is the same as SSTATE_DIR.
(From yocto-docs rev: 94b8a45827d2bf7f16ec530de694ec5e4e6ed164)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the release month in all the manual revision history
tables to say "October 2012" from "Sometime in 2012".
(From yocto-docs rev: 1fc9313fe6c69db3d8cece6d940f78a2f0dc8386)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new chapter dedicated to migration information for
the user updgrading from a previous YP release. Also had to
include the new chapter in the poky-ref-manual.xml manual so
that it will build.
(From yocto-docs rev: df8e02c17bc8157ad4abd1e4954f762ccde8915c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This entry was situated so that it was not in alphabetical
order. I moved it.
(From yocto-docs rev: f545414ead63ff58557142acdf416bd5e58d5c45)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Edits to get the patching the kernel section more sane.
* A tweak to the opening sentence of the compliance section to
rid it of the split-infinitives.
(From yocto-docs rev: 8e2ff293e85a602efd98aceb20da5a2ea5f2a34d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made changes to try and clean up the process.
(From yocto-docs rev: 9c4fbcb473dc594647ba8779162379a745f8f8d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created the new section in the reference manual that lists the
distributions that support YP.
Updated the section in the QS to reference the new section in
the reference manual.
(From yocto-docs rev: ff85945574466b2e6431fbaa0026cdea9d96ac9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Add meta-yocto, meta-yocto-bsp and meta-hob
* Remove meta-rt - this was merged into OE-Core (meta)
* Remove meta-demoapps - this was dropped
(From yocto-docs rev: c90a8f85f4462caa49c7da2e7ec4541534bee57a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some wording changes from "packages" to "recipe" as appropriate
in some of the variable glossary entries.
(From yocto-docs rev: 8f3d72dad9b68f78987a497092d74ff3f7e35b28)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We haven't supported ipkg for some time now - it was replaced by opkg
(whilst still using the ipk package format).
(From yocto-docs rev: 07b3dd9a73be25f31c919ed750ca320c7507eff0)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Use correct/up-to-date names of package systems
* SUMMARY does not default to the value of DESCRIPTION, it's the other
way around (although the logic may be improved in future so that this
is the effect).
(From yocto-docs rev: 4ec095f0f45cb3a62a8dfdd1a098b23cbe1dc7b5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Document DISTRO_FEATURES_BACKFILL and MACHINE_FEATURES_BACKFILL. We may
wish to expand upon this in future, but at least this explains what
these variables are for and how to use them.
Also add a link from the DISTRO_FEATURES entry to the section that lists
valid DISTRO_FEATURES items.
(From yocto-docs rev: 018af5c28b44464ae66646780ade910bdcab2bef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extend the description of the DISTRO variable so that it mentions that
this points to a .conf file under conf/distro and mentions what happens
if the value is left blank.
(From yocto-docs rev: 50f8f0394d8d849e0a227d6c9ffcdc3cccb7e307)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a description of the PACKAGECONFIG variable to the variable
glossary.
(From yocto-docs rev: 07d08314d3151de7073567a7800156f69fdb549e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Extend the description of the MACHINE variable so that it mentions that
this points to a .conf file under conf/machine.
(From yocto-docs rev: dd82b176bb059d03faec1abdd406e4cf8f0e5afb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust the descriptions so that it is clearer that these are specific
to a machine and should appear in the machine's .conf file, and are
intended to affect the image contents, not the dependencies of a
specific package. Also change the examples so that they demonstrate more
realistic usage scenarios for these variables.
(From yocto-docs rev: 3c3b8b117b09d78637ae8c4d27f77194cf197ea9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3118]
LICENSE_PATH is the correct variable to use for 1.3 - see:
https://bugzilla.yoctoproject.org/show_bug.cgi?id=3118
(From yocto-docs rev: 96b93175d662696c3c2f25c0d8aa73ab6c5abdd3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made some general edits to the new "Patching the Kernel" section.
Also had to remove a couple of images no longer used in the section
from the Makefile "TARFILES" variable.
(From yocto-docs rev: ac61e22e2f89926fbbda56fbaa4384c3c5156360)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the temporary text in the new "Patching the Kernel" section
that was copied from the old appendix A. Fixed the PRINC variable
in the creating a new layer example.
(From yocto-docs rev: 3eba77a81d3460866638a2f2d6b7c27d9dd1a2be)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "kernel-example-repos-generic.png" file as it describes
the bare clone method for kernel modification. We are removing
that from this manual.
(From yocto-docs rev: c25c4f662c2f8a83fd9b09583646be9dbe01424c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Moved the simpler version of the kernel workflow diagram to the
figures folder.
(From yocto-docs rev: c856fe320a0e70701f14312439fec6ccb707f9bd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel workflow section was re-written to reflect that the
kernel appendix has been removed. Also, changes to the flow in
general no longer make reference to the bare clone and the copy
of the bare clone as a method used to modify the kernel.
Many links were modified in other manuals as well.
(From yocto-docs rev: 38adbcb00d4305029cfa94e5ef047da41823f021)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The figure that shows the bare clone and the copy of the bare
clone are no longer needed. The description for the kernel
workflow has been reduced to discussing only modification of
the temporary source files. We are no longer talking about
creating a bare clone and copying it as a way to modify the
kernel in this manual. That topic will be described elsewhere.
(From yocto-docs rev: f6a25e5e3763ea7a1f8a81ce377e3b520143b852)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3245]
New glossary terms for SPECIAL_PKGSUFFIX, and MLPREFIX.
Also improved the definition of the BPN variable.
(From yocto-docs rev: d9eb38122967a5729f3a6aff1dae00427a22f579)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The "Common Tasks" chapter is better suited as the last chapter in
this manual. So I moved the development workflows up a chapter.
(From yocto-docs rev: 19f0a6411c065388b5bd0083338b164b43baff0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel example appendix is now gone.
(From yocto-docs rev: d744e76034ff2711a8c40b9bb1982971d28a04b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel example appendix is being removed. This broke a lot
of links. For now I have moved the information into a new section
called "Patching the Kernel". I have preserved the information
by adding the old appendix file as kerne-appendix-orig.xml.
(From yocto-docs rev: 994235a69362dfb0114ef9001ea7f2f2e2fdc5c3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Eliminated the section A.2, which had an example of how to use
menuconfig in the kerenl example appendix. The information is
now merged into the similar section in Chapter 4 "Common
Tasks." It was decided that the Appendix A examples in the
manual were too detailed for a general development guide.
(From yocto-docs rev: f88ec421b257657f02cc0f132ec2580c17f07cef)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this statement in the linux-yocto-3.4.bbappend file needs to
have the comment removed so the source can be found.
(From yocto-docs rev: 821162221818f5ce53bb903aeef57c85314f5083)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Kernel example appendix I changed some remaining 3.2
kernel strings to 3.4. Also I added the OE_INIT_FILE variable
from poky.ent for use instead of the "oe-init-build-env" string.
(From yocto-docs rev: 1d9d8d72d197bdd81756eed7fe1529f341de6089)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Each time the kernel revision is bumped (e.g. 3.2 to 3.4)
Some of the figures would be out of date. The reason is they
had pathnames that included the release of the kernel.
For previous YP releases I was adding logic to the Makefile
to be sure to catch the right files dependent on the branch
from which the documents were being built. This scheme is
not scalable so I decided to make the figures generic by
adding a note within the figures explaining the place-holder
"<x.x>" as part of a pathname. Thus, three new figures were
added to the folders directories of the dev-manual and the
mega-manual. Correspondingly, the 'denzil' version of the
figures were deleted.
I modified the Makefile so that if the BRANCH is not edison
or denzil then the generic figure set is used. I have to retain
the logic for both edison and denzil to cover the case where
a user clones or sets up an edison or denzil repo and then
builds out the manuals. Basically, it had to be backwards
compatible for releases prior to danny.
(From yocto-docs rev: 8283eed4b0b9ec164b87db99c35231f8731ac443)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor edits to the part of the example that sets up for the
first core-image-minimal build. Put in the variable to use
for the build environment setup script, updated some changed
output from some of the commands, etc.
(From yocto-docs rev: 0b4b2ddf9a78a9d6d218ed9a6f0acd3e876d9581)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Danny, the "kernel-example-repo-<release>.png" file changed to
"kernel-example-repo-danny.png". To correctly make the dev-manual
and the mega-manual some things needed to change:
1. New figure created and added to both the dev-manual and the
mega-manuals figures directory.
2. The "kernel-example-repo-denzil.png" files from the dev-manual
and mega-manual figures directory was removed.
3. The Makefile was adjusted so a new BRANCH=danny area now exists
to set TARFILES for both dev-manual and mega-manual.
(From yocto-docs rev: 8b2ff6b657a1486559799e219baaec9fde2e5c6c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a note at the beginning of this appendix that references
the yocto-kernel script as a way to quickly manage kernel patches
and configuration.
(From yocto-docs rev: 35cd7f6a9722120e47ae8b422dd86593497ebf1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3180]
Final changes to the packages section. They were re-organized and
the set is complete and thus fixes this bug.
(From yocto-docs rev: 533b45c9d41330497bbd0da58b812a4738ba64a8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This appendix is antiquated and needed removed. The BSP
development example is now in the BSP guide where it talks
about running the yocto-bsp script.
(From yocto-docs rev: 892ff450d79a7564a72f11eb7510d349ca71d47a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the Appendix A (BSP) example had some rippling affects
throughout the doc set. There were several links into the appendix.
All these links had to either be modified (if possible) or simply
removed since the appendix will be removed.
(From yocto-docs rev: fff35abd87e945de1806eef63a56a956d104bf92)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section now points into the BSP Guide where it talks
about using the yocto-bsp script to create a BSP. The prior
method was by hand and described in an appendix (A) of the
YP Development Manual.
FYI - this results in the removal of Appendex A in a future
commit.
(From yocto-docs rev: 5e1c44b1768b79dd1447ea47461b84248bd2111f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few edits to the respective sections that talk about required
packages. Some wording changes for headless and graphics
supported systems. Also, re-inserted the note about older
CentOS systems.
Reported-by Paul Eggleton <paul.eggleton>
(From yocto-docs rev: 112370758cf41104ff04c4996d4a432e6bd54be1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a walk through of the "Using the Yocto Project's BSP Tools"
section. Updated included altered output based on the current
example commands and scenarios.
Also made changes to the bblayers.conf file as the default
version for this file has changed.
(From yocto-docs rev: d8a2195e37d8f96702026e42bb43daf39852ffcb)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The examples were out of date. They did not show the
meta-yocto-bsp layer, which is there now by default.
(From yocto-docs rev: ea2e2e8a259bc3e629fb8087229872b9818a696a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This section was out of date. I copied in the most recent version
of the bblayers.conf file, which sets LCONF_VERSION to "6" now.
Also, added the meta-yocto-bsp layer to the example.
Additionally, I inserted a Note explaining the consequences of
removing the meta-yocto layer. The note references [YOCTO_#3176]
for more information.
(From yocto-docs rev: 532b72c5c18b2a9a61619164bae6216c91c2ecc9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The current setting was changed from "1" to "6".
(From yocto-docs rev: 7f5be4b0b2d1e17add774c7ba3b8803ad770a8fc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the meta-yocto-bsp layer to the example listing in the
"Enabling Your Layer" section.
(From yocto-docs rev: 95fb13a1049ccaffb3531c93a28a3c480ea1a243)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the meta-yocto-bsp layer to the example.
(From yocto-docs rev: be4ee9d08527b654071b8d4ff54ad978f50a98f5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term should be initially capitalized.
(From yocto-docs rev: 38a11d512bfe675319fb76da9d7618315af91c47)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reorganization of the packages section in the YP Quick Start.
These are now ordered still by distro but the listed packages
have been culled down to just the needed ones to run an
image on QEMU with graphical support.
A corresponding section in the reference manual now provides
the comprehensive list of packages for all supported distros.
The section in the reference manual is broken down by
distro and by function.
Finally, four new variables were introduced to track the
essential packages for each of the distros. The variables
are defined in poky.ent and follow the form
<distro>_HOST_PACKAGES_ESSENTIAL. This will make it so
we don't have to maintain this list of essential packages
in multiple places.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 839b441791980db82f4795454e976e606b486d25)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that this section correctly and accurately describes how Poky and
OE relate to eachother currently. The faq entry changed is
"How does Poky differ from OpenEmbedded?"
(From yocto-docs rev: ecc88ef12ec2faa48d05824e8b781a7d43e86127)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The entry for the question "Are there any products using
the OpenEmbedded build system (poky)?" was updated. The
changes result in a better question and answer.
(From yocto-docs rev: cfc4a945738e891d20ab1a2a7002c5c421b0a225)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Explain that we test with a set of reference hardware rather than only
supporting hardware that we have (avoiding any implication that the
build system can't support other devices). These are in the
faq entry in the poky-ref-manual for the question of how we can
claim Poky / OpenEmbedded-Core is stable.
* Adjust the language so that it is OE-Core friendly, with a link to
the Development Manual for the definition of OE-Core.
(From yocto-docs rev: 5ff1604dd383b26e918c319fcbe46dd1589cebc5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we are using a layer-based approach, people do not
need to rely upon the Yocto Project team to add support
for new boards.
(From yocto-docs rev: 569ff9da7443f9654f288d0a4e62ef06ba34ba52)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the patch from Paul a bit here to conform to
the style of writing plus to make things clearer.
(From yocto-docs rev: 87abf857cfcd8a0d78a48322fbe9ac5395b6ad30)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Took out the FAQ question about using Ubuntu Intrepid and
seeing build failures.
(From yocto-docs rev: 2885aa27904d4b31541f77ceeb54ad94a8e21378)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Adjust a few sentences so that they make better sense.
(From yocto-docs rev: 67437c9f31fca0437e1f23ab78dd252f3ca0a903)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add new SDKIMAGE_FEATURES to variable reference.
(From yocto-docs rev: bb7de36ef04a11c95c46c8fbbe170c721d7b020b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Document the new staticdev-pkgs IMAGE_FEATURES item.
(From yocto-docs rev: 64317edb209b8f9c720c4b1930a0d355d2db6b38)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the listing of the final SRCREV statements for the
BSP example.
(From yocto-docs rev: 0d0d5994c2653dda1171eaad226bbe1764a04440)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These changes are partial for converting the example for BSP
creation from Crown Bay to Fish River Island 2.
(From yocto-docs rev: c7fc78a8453ad363138764aa30e377b56ce49f2b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the reference to the Downloads page.
Also fixed the local branch in the meta-intel example so that
it uses the same name as the local branch created for cloning
poky.
(From yocto-docs rev: edac781b37bce0d0bca6a741186cfa53a512b73e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The new branch is named distro plus poky revision
(e.g. danny-8.0). I had just the distro in there.
(From yocto-docs rev: 9490849f7f6dc815d1b676b15b3f38f671a49be8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "Source Directory" should be capitalized.
(From yocto-docs rev: 143213545358dd5b6c28c71202bea2e40dbb2522)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In the Quilt and Git flow methods there is a bullet that talks
about incrementing the PR variable. I changed the wording to
be in the context of recipes rather than packages.
(From yocto-docs rev: 64f6230251c023e469a346c0425834b950ed5c9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The example that describes changing the source code usees the
P* variables extensively to refer to names of the recipes. The
wording used was antiquated and exclusively referred to
"Packages." I changed to reflect the fact that P* variables
in general are refering the recipes and not the packages.
(From yocto-docs rev: bd3ef1c46fc7a3b0b2ff5ab60dc52e125f080e24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
some of the links to information for the user-space tools
had become obsolete. Fixed them.
(From yocto-docs rev: 84e72204e34e45d9d8cae876710a46a83b61c0cc)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the preferred branch for the Eclipse example from
a hard-coded "1.3_beta" to use the DISTRO_NAME variable.
(From yocto-docs rev: 9393c5d1e44a1e326c73353b090c1d1c1a5833da)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information in the #4 box to include the cross-dev
toolchain.
(From yocto-docs rev: 198ab4326369d8c74225d9de51bf536621ab2251)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the item that talks about getting the root filesystem.
Realized that the cross-toolchain was not discussed in this
bullet for the case where a user does not use the ADT
Installer. Added text and references to correct that.
(From yocto-docs rev: ec2f5103471f047f7ed7e53cc22789c74ab506ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added an earlier occurence of the "tm" for Eclipse product.
Also, changed the reference for modifying the kernel to point
into the appendex rather than self-referencing the same section
from where the reference originated.
(From yocto-docs rev: a85840611650c9124b6194acca59c8bfe71f566c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I standardized the use of the term "Source Directory" when
referring to the poky directory as set up on the host.
(From yocto-docs rev: 3eaf7a734a4eecab2be2c8e71bee4d6c2cb7788b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made this more accurate by including notes to edit the
source and use of menuconfig within the diagram.
(From yocto-docs rev: 91d3d2e935aab24c4bd96c5921a605cbbb7e3231)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needed to add the 3.4 kernel to the list of linux-yocto-*
kernels as found in the source repository.
(From yocto-docs rev: 98538e2616214f76083697ad3cc886efd183c34e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The bulleted item that describes where to look for application
development was still pointing exclusively to the adt-manual.
Updated to point to adt-manual for host setup only and then
point to section in the dev-manual for the Eclipse example.
(From yocto-docs rev: 36ac631e23366c4d9f83c2d00cbbd3bc4758aa15)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better display of the SELECTED_OPTIMIZATION variable options
when they appear as a list.
Also, some punctuation added.
(From yocto-docs rev: 73777e545f13eacca9ee466ba852bccd84c17f6f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
'sdk', when used in general terms should be capitialized.
(From yocto-docs rev: 1d68746ae197620b533a9ad53e71b16c9e4e42b8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I found other changes for underlying/corresponding wordings
regarding the relationship between .bb and .bbappend filenames.
(From yocto-docs rev: 28f12a4ea97a683281cd8cc0bbceb40d2b896aa4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better choice of word here is "corresponding" rather than
"underlying".
(From yocto-docs rev: 3d8b6d6e06b81960df2a7d25b6d54308210cc011)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The manual listed an out-dated example listing of meta-* layers
in poky.
(From yocto-docs rev: 39e2a02301d1d0b609fbc041395dd31f6ba9fa2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description for where the "scripts" directory lives was not
conforming to our terminology.
(From yocto-docs rev: 925167c446b86ca09d387d01568db64113412311)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For obvious reasons I changed this one :)
(From yocto-docs rev: 5f3203292f46bea799321e4520668252a46fb599)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I improved the wording such that it is not tied to a
x.x type release. It is more generic here and will survive
better under future releases.
(From yocto-docs rev: 2bd644db7fef71cd2f07f6d3dcbd2ba60b83df08)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a line to cd to the poky directory so the example makes
sure the meta-intel directory is created in poky as it states.
(From yocto-docs rev: fdeff0fc2c61c521eaf9d3c48429792f1559c2a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated so that the repo poky-extras is for sure created inside
the poky repository.
(From yocto-docs rev: b01ea76ded2ade66f2cb19b37d9e9d8d5d2e96c9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed the example of what the manual does not provide to
be more appropriate.
(From yocto-docs rev: c4e7712cfd2e13b42f7322ffed6a1f84116df963)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Turns out the .sh file that installs the tarball comes down without
executable permissions. I added a sentence in each manual instructing
the user to set the permissions to the script before attempting to
run it.
(From yocto-docs rev: c1699971b3e03893aa1af5033e19d8f5c0b21ff4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#2930]
You can now select the install location directory instead of
automatically going to /opt/poky. Some small edits to the
section that describes what happens when you fire off the
adt_installer script.
(From yocto-docs rev: 57f34c9b3a82222ed0ffc99e998614884b9a3486)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new paragraph to the section that talks about getting
images to state that if the user is not using or building a
core-image-*-dev type image and they want to develop against
their image, they need to be sure to include the development
packages in their image recipe.
Reporte-by: Jessica Zhang <jessica.zhang@intel.com>
(From yocto-docs rev: 8da6f6172d3ad27c1cf6d52fd3d029d75ec9d0fd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Section A.5.2.3 "Changing recipes-kernel" indicated that the user
needed to look in poky/meta-yocto/recipes-kernel/linux to find
the linux-yocto_3.2.bbappend file to locate correct SRCREV
values. With 3.1, the team split out kernel and BSP stuff
even further by creating a poky/meta-yocto-bsp directory.
The example needs to reference that directory instead.
(From yocto-docs rev: 6e9b0ceb5ad24b1be8399bf5a0a83fdc30129f82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#3095]
A minor edit to the glossary entry. The fix for this bug spanned
two other commits:
418862011e79940ee378f64c6171618d29568014
7647cef96643b3723f80013c2c51ba6d7480122a
(From yocto-docs rev: 053e4558cc90eb1618e697394aff6d40edbeb3b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These edits removed the .x eplanation at the end. Paul Eggleton
concluded they do not matter and are confusing.
(From yocto-docs rev: 3f3e0b65bbfbb8da3ba1ebbb8dc78c3adf5a1c98)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There was a malformed line in the example. It needed a space,
which I added.
Reported-by: Brian Lloyd <blloyd@familyhonor.net>
(From yocto-docs rev: 892062d46463237375c49772cadb03356f636a82)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A re-write of this glossary item. The example provides more
detail and frames it in the context of a real example.
(From yocto-docs rev: 1a88abecf6ab5895d3c8ff801bd869a90a8a3fc1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the wording in the front to get rid of redundancy
and specifically state that this variable affects .bbappend
files only.
(From yocto-docs rev: 7647cef96643b3723f80013c2c51ba6d7480122a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the glossary description for the B variable. There
was some confusing "source directory" terminology in there.
(From yocto-docs rev: 72fbf86ca9612a0dca741f08315efed1d9efa0b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the section "Using an External SCM." This section was
written so that PN was refering to a package instead of correctly
refering to the recipe.
(From yocto-docs rev: 2bf44cf78bef08d2dd4d9e596100900913777d60)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new glossary entry for the BP variable.
(From yocto-docs rev: a6a8f7ad9157932799eb3e3d0bbffdf93ed70c0e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a glossary entry for the P variable.
(From yocto-docs rev: f1d65b7cca35bdfaad029523de0d88d4e009f82a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a first draft of the glossary term PRINC.
(From yocto-docs rev: 418862011e79940ee378f64c6171618d29568014)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new glossary entry for the PF variable.
(From yocto-docs rev: 1ad43661638ab9ae8a3af9d6149f6af633bdece2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added some clarifying edits to the explanation about suffix and
prefix names used with the PN variable.
(From yocto-docs rev: f42baf8ddb3da1ab8ba69d30581812646ce4dc83)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Checked and fixed all text surrounding the description and use
of the PN variable. This variable can mean a recipe or a resulting
package depending on context.
(From yocto-docs rev: 7ac52f6b184670db9cdab7c205126b62c60b0d29)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Re-write of the SRC_URI glossary entry so that proper terminology
for PN is used. This context the PN refers to the recipe name
and not a resulting package.
(From yocto-docs rev: fc371890d9797ba57e2ce848cd2f82f42dd6ac36)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#1939]
Added the option downloadfilename to the SRC_URI variable
glossary description.
(From yocto-docs rev: abc32d85a7f241766d1fcc52a251249f2172ea89)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO_#1939]
Expanded the definition for the SRC_URI variable in the glossary.
The new information includes protocol types and SRC_URI options.
(From yocto-docs rev: 033d58cd2ec2a579fa085bcca1e5d0ad4dd65708)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Replaced with the variable OE_INIT_FILE.
(From yocto-docs rev: 1deaa02f29b2a4b9cc7ff3307c8a3ebd0dfb9623)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few minor corrections to fix some wordings.
(From yocto-docs rev: de71001992150da685a70389e28313df609d6521)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the example that builds an image so that it uses the
default build directory. It seems like the natural thing to do.
Also added a new poky.ent variable named OE_INIT_FILE. This
variable is set to the name of the build environment script
(From yocto-docs rev: f0db49e27e89aefb6d43a0b455c6ecc529399c27)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For 1.3 there is not longer a toolchain tarball. Instead, there
is a wrapper script that lets you install the tarball. This
fundamental usage model change caused several ripples throughout
the documentation set. I have changed wordings and examples
to reflect the new paradigm.
(From yocto-docs rev: afb2069daa91e04c0f78ba425a6b184cb820d888)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The steps for creating a project in Eclipse vary a bit between Juno
and Indigo. These changes reflect that.
(From yocto-docs rev: a020ecde8ed02a29f67498ef1511261d2054f784)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a couple of reminders and some links to information about
separately extracting and installing the sysroot filesystem.
(From yocto-docs rev: d340dcb5021fe1dcdaae0830ef8624c0fc54bedf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added text indicating that the user is prompted to verify the
cross-toolchain installation location.
(From yocto-docs rev: 3226eb2f0807687e8685702850a3a12b3d60ae5f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a command to the example that places the user in the
adt-installer folder before they attempt to run scripts/adt_installer
for completeness.
(From yocto-docs rev: f098e1095d24d0271fb21f50aa848ebc05b828b1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to test out the lastes version of installing the Yocto Eclipse
plug-in from the latest source. Small changes to be more complete
on the step-by-step process with regard to being in the right
branch. Also, inserted 1.3_beta as the version. This will change
later.
(From yocto-docs rev: 1326916a7d03bdbb0613e6e26a4089b3bd87d204)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed the repo example so that the -b option is right after the
git checkout command and so that the "origin/" string is part of the
example.
(From yocto-docs rev: ba7ed26cf308a69e1ec8cfb0072dd10742af4ac5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Slight wording change to the description of the
PACAGE_BEFORE_PN variable description based on feedback from
Paul Eggleton.
Reported-by: Paul Eggleton <paul.eggleton@intel.com>
(From yocto-docs rev: 8f7dcdb8edf461133d2149eb4728ee3682affc98)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the variable from BB_ENV_WHITELIST to BB_ENV_EXTRAWHITE
in the text before the example line. I had the wrong variable
in there.
(From yocto-docs rev: f909a7336ae2f95baa751231beeae08081576e1f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2904]
Added glib-gettextize package to the list of required Fedora
packages.
(From yocto-docs rev: c46f8e46ad70bf979d2e51e58d461bcd9456b773)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the BitBake "Preferences and Providers" section to remove
references to these two Pimlico applications that have been removed,
and tweak the example slightly so it is technically correct.
(From yocto-docs rev: 744624a40d02a859b3c526f5ea6657d32edd39c6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
List frameworks we provide that are likely to be used by people these
days - Pimlico has been removed and GuPNP and Matchbox don't really
belong. Also slightly modify the sentence following so that it is clear
that these are optional.
In addition to Paul's patch, I cleaned up one of his sentences with
some simple grammar edits.
(From yocto-docs rev: 1cdeb057bab0d69fe6656e33e643962dd2086567)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* core-image-core was renamed to core-image-x11 and the editor and file
manager were removed.
* core-image-basic's description has been updated to reflect its
intended purpose
* core-image-lsb is intended to be standalone - should not be
associated with core-image-basic.
* The Pimlico applications have been removed so they are no longer
present in the Sato images.
In addition to Paul's patch, I removed the "etc." word. This word
is better replaced by "and so forth". Also, consistent with the
YP documentation.
(From yocto-docs rev: aba7ae60a38dfeda9ef52237b81f387984621847)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a short section about packagegroup.bbclass.
In addition to Paul's patch, I changed the title of the cross-reference
to be the actual title used in the YP Development Manual.
(From yocto-docs rev: bfd4db7e0ef61a2dd7159cdc841dcffc2d9c53d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* For PE/PV/PR/PN these pertain to a recipe ("package" was used here
historically).
* References to variables should not be prefixed with $ in the text
* Add text about suffixing RCONFLICTS as per other package variables
* Make ALLOW_EMPTY example complete
* Clarify and add example for AUTOREV
In addition to Paul's patch, I re-worded two instances. One
to get rid of "package(s)", which is poor form. And a second
to get rid of "unstable/development", which is also poor form.
(From yocto-docs rev: 498349f8d82f46433626521d148ff6c1d72e2b1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Clarifying who picks up files that would normally be included
in the default package. This is a wording change to try and
eliminate the ambiguous "they".
(From yocto-docs rev: 63f87b6616c1a93d39e198f0b02d01d36ac09467)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed the "Reference: Images" section to "Images". This old
name was a hold over from when the book had appendices that were
reference-like. Along with changing the name I also fixed two
links to the section that were found in the variables chapter.
(From yocto-docs rev: e21a973cfe07d21acdfe02b49aa86c7672905968)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also add a definition for PACKAGE_BEFORE_PN since the default
value of PACKAGES now includes this.
In addition to Paul's changes I reformatted the default to be
<literallayout> to appear as code.
(From yocto-docs rev: 187390e2589b886e524700db9dc2e89cf28c6e90)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These file paths are no longer valid, instead point to the section
of the reference manual with more information on valid IMAGE_FEATURES.
In addition to Paul's patch, I provided the actual section name for
the cross-reference link he inserte.
(From yocto-docs rev: ad356708bfe3a14e82d678510df15cb93dc2f057)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* apps-console-core has been effectively replaced by splash
* apps-x11-core, apps-x11-games have been removed
* ssh-server-* were added quite a while ago, add these here
* x11 has been added
* x11-base has changed behaviour slightly
* doc-pkgs was added
* nfs-server never exported the entire /, so remove this comment
In addition to Paul's changes. I performed some general edits to the
list so that it is active voice and has a parallel structure for
all the list items. Changes involved some of Paul's stuff and some
of mine.
(From yocto-docs rev: fec6f162506a59124b137a7d1640944114ebb5c2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Task has been renamed to package group, and there are some minor changes
in how package group recipes should be constructed - in particular the
inherit of packagegroup.bbclass is now highly recommended as it will set
appropriate defaults and automatically add complementary -dev and -dbg
packages.
In addition to Paul's patch, I added a couple <filename>/</filename>
tags around some switch names to be consistent with manual
formatting.
(From yocto-docs rev: 598d18507ace2054f8c8bb5f496557c98f066b5a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The meta-intel BSPs and yocto-bsp tool no longer use a bbappend of
task-core-tools-profile to add systemtap, so these sections should be
removed.
(From yocto-docs rev: cdc12163dd95f0a78cc0f35c03b5eb3d7b1476e3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Robert P. J. Day pointed out a link in the development manual that
was for the BitBake User Manual. The link resolved to an old,
non-maintained version of BitBake documentation. According to
Richard Purdie, the BitBake docs referenced should be the ones
that ship in the bitbake/doc/manual directory of poky. The
YP docs had been using a variable named BITBAKE_DOCS_URL that
also resolved to the antiquated user manual site. Consequently,
there were many links that needed fixed across both the YP
Development Manual and the YP Reference Manual. Each of these
references now points in general to the bitbake/doc/manual
directory in poky for more information.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 12f77236b602e9ec43e845c8cec060ad342af19c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a note in the "Creating Layers" section noting that to be
Yocto Project compliant, a layer must contain a README file. This
change was prompted by a discussion over the fact between Robert
P. J. Day and Mark Hatle.
(From yocto-docs rev: 2e073763a81125699a2d962031ca29ca64c81595)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I think I got it right this time... sheesh. Had the wrong
file suffix in there for the .tgz file.
(From yocto-docs rev: d5931252ede475846dcb61fc0e0f03eb7fe4015e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3036]
Turns out the fakeroot package is not required for the Fedora
Linux distribution. I removed this to reverse the fix I did
earlier for YOCTO #3036.
(From yocto-docs rev: 6b22dda7fc7f07bd34d2a84e03308ae8ebcfbe9b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor wording changes.
(From yocto-docs rev: 2744ef171c4454ce66aee240963c34bc326f1c07)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3036]
Added fakeroot to the Fedora package list. Removed python-curses
package from the Fedora package list. Added python-curses package
to the OpenSUSE package list.
This fixes a previous commit where I accidentally added python-curses
to Fedora.
(From yocto-docs rev: 8e1b7a640886e6d39cf1e175611098555204a5f3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #3036]
I added the python-curses package to the list of required packages
for the Fedora distribution.
(From yocto-docs rev: 2929a0f97cd9be88580c0a80848b7fff327b4642)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This new directory contains the files for the mega-manual HTML
document. Mega-manual is a compilation of all the existing YP
manuals and guides. It is a single HTML file that simply lists
each individual HTML document for the existing YP manuals and
guides. The figures directory contains all the figures (duplicated)
from the individual manuals and guides.
(From yocto-docs rev: 5620c20ea4c7c69c96601b7480471e6166fd9409)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added this file to the tools directory. It is used from the Makefile
when making the mega-manual. The file processes all the appropriate
<ulink> tags so that they are converted to <link> tags and the user
is not vectored off to an external HTML file.
(From yocto-docs rev: da2ad62a160c22f785e8237439494716e4c023cd)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the section that describes how to submit a patch through
email while not using the scripts that send patches and request
pulls.
(From yocto-docs rev: 9167b89289134d8d16610cc527d0d71713c0641b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the title and a single reference from the Kernel manual
to a title more representative of how these patches are sent -
not using scripts.
(From yocto-docs rev: ff908c34fae88eab9724891a008142a834f34081)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added text to indicate that using the two scripts for generating
patches and requesting pulls is the preferred method to send
a patch.
(From yocto-docs rev: d6f036a91074dd00c51fe0f937224182fc801b3b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the section heading for the part describing how to
push changes upstream via the poky scripts. Also had to
change one cross-reference to the section in the kernel
manual.
(From yocto-docs rev: be7712aba044238e8781cdf869c5d14e77eb09a2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Every place in the YP documentation suggests setting BB_NUMBER_THREADS
and PARALLEL_MAKE to twice the number of cores as the host machine.
This fixes a single instance in the YP dev manual where it was
suggested that PARELLEL_MAKE be set at 1.5x times the number of
cores.
(From yocto-docs rev: b6b820371cbe43e39425156c72c45df283fdf7d1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added information about the mega-manual.
(From yocto-docs rev: bbf75682f957ad2e124aa9476f52cd2bd3829fa6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Three things done to the Makefile:
1. Added logic so that the user can generate the mega-manual HTML
document. It includes processing links using mega-manual.sed
2. Added and updated the comments for 1.3 and inclusive of
mega-manual generation.
3. Added a test for the existance of HTML file in the publish
task. Previously you got some error that was geeky.
(From yocto-docs rev: 99b865ab96b086d818375d1c00f98a3e3a4f4e9f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed "The" from all the titles of the books. This makes it easier
to reference to them and easier for the automated processing of the
mega-manual.
(From yocto-docs rev: af566d6d007cff642648698ea487a6eeaa8cc930)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed a reference to a manual that should have had "Guide" and
not "Manual"
(From yocto-docs rev: a51de96fe0cd78cb379e6758d7e357c91daa2791)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed several occurences of cross-references to whole manuals where
the formatting was split in the <ulink> statement. The <ulink> tag
and the manual title must be on one DocBook line in order for the
sed scripts to correctly process the links when the mega-manual is
created.
(From yocto-docs rev: 0dee12d518c892f59c0446e1c7b5d0f71b6ee22b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed several references to books. There should be no books referenced
using "The" at the beginning of the manual title. These need to be
"the" in order for correct mega-manual link processing with the
sed script.
(From yocto-docs rev: 76753216c7138d55f7b6f9167d678245ab3134e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the title in the note about production process was technically
wrong. I added in "Yocto Project" as part of the title.
(From yocto-docs rev: c421f02549b8ca203d1c9f747870911c59bda96c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the notes that say "Due to production processes..." at the start of
each manual contain links to manuals. the links needed to be formatted
such that the entire <ulink> code and manual name appeared on the same
line so that the sed script can effectively remove the link in the
resulting mega-manual.
(From yocto-docs rev: 0a41971c331ad1961e6ee1e067b59c36c9f048f6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I moved "the" outside of the generated HTML link so that the sed
script will process this part of the manual correctly for the
HTML mega-manual.
(From yocto-docs rev: 3bdf7c7dc4478f2a435cbc84a8a815daf7130660)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The references to the YP Development Manual were inconsistant.
These references were fixed.
(From yocto-docs rev: f4ded0b965fcbce7b500ca21886ee9b755c38383)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The way I refered to the YP Quick Start was inconsistant.
I have made edits to remove these.
(From yocto-docs rev: d9487c60db23861e8a9dd2c81ac46d4960abd462)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added new style.css names for the individual manuals.
Also, created a new entry for the mega-manual. This will generate
an HTML file only (similar to the QS). No PDF file will be generated.
The entry creates an appropriate mega-manual.tgz file as well and
can be branch-dependent (like the dev manual) since it will
obviously include the dev manual.
(From yocto-docs rev: be8c0b965a89e3517a09647eeda06c2ff163d260)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I had to rename individual style.css sheets to have book-specific
names. So style.css for the ADT manual becomes adt-style.css and
so forth. Turns out, this isn't really necessary for the solution
to create the mega-manual but I am leaving the changes as a
separate commit because it makes sense. It causes no disruption
to making the six YP manuals.
(From yocto-docs rev: 8cbdae1fe86988243f91dfd611c14f8a37007886)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For some odd reason the PNG filename for the YP logo did not end
in "p". I added the character so that the image is displayed.
(From yocto-docs rev: a6a4bcf9798be2bbf1be3922226ef83b7d6667d6)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I changed a couple of id strings so that they are not duplicates.
I did this to eliminate a make error while experimenting with creation
of the single HTML YP document comprised of the individual docs.
Changing the id strings has no consequence on the individual Application
Developer's Guide and Kernel Manual.
(From yocto-docs rev: 4e6832eca319a637be693dfe67ee56c540dfddfa)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a read-through of the manual and spotted several nits that
I fixed. All these are minor fixes.
(From yocto-docs rev: 0c8f9c660ecea0b36e2b6af0315d3d239f70a688)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the first sentence of the description of how to use QEMU images
with NFS server. This is feedback from Scott Garman's review.
(From yocto-docs rev: 6a33b1b58bd72756baf57228b7348ff662248012)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #2929]
Provided an updated section on how to install and configure the
Eclipse IDE so that it supports both Juno 4.2 and Indigo 3.7.2.
The fix included creating a new poky.ent variable that is
Juno-specific.
(From yocto-docs rev: 6b0b046322420f56feb644eb6de8341dfac59df2)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added clarification on how a user can hand-delete images from
the build/tmp/deply/images directory.
(From yocto-docs rev: 4655085d43b36b024a2e01cfcc7455e18d891ab8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated an old comment in the layers.conf file example to say we
have recipes-* directories instead of the old packages directory.
(From yocto-docs rev: c39394e848d6039e6728b7e53de86958f951e258)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Two areas of the manual updated to reflect the fact that not all
QEMU images have an SSH server in them.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: a173d8cb05ee695b02188a037ee047db016c6a67)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the decision to create a single HTML file that has all
individual YP manuals, the need for including the BSP guide as
part of the YP Reference Manual goes away. I have removed this
guide as a chapter, removed the mention of it in the introduction,
and fixed the two links in the FAQ chapter to reference the external
manual.
(From yocto-docs rev: b0dbda9e09b73c2b26111bda118731dbb3090cae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The detailed chapter that describes how to install and configure
the Eclipse Yocto Plug-in has been moved to become a subsection of
the "Workflow" chapter in the YP Development Manual. This commit
accomplished the bulk move, edits to integrate the information,
and fixes to all cross-references. Moving the chapter creates a
sectioning issue in the YP Development manual that results in
subsections that are six levels deep. Not ideal. Will look at
fixing these with a subsequent commit.
(From yocto-docs rev: e6abff8f578f2cf6997895260f607395281ae8e8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name of the ADT manual has changed to the "Yocto Project
Application Developer's Guide." This change had some ripple effect
regarding cross-references into the manual. These are now fixed.
(From yocto-docs rev: 7ba25c470b03a85098388e6cca7c78a6ebb245d8)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In preparation for taking the Eclipse installation and configuration steps,
I have made an edit pass through the section "Workflow Using the
ADT and Eclipse". Minor edits performed to integrate the new
information.
(From yocto-docs rev: 7b4e0ae371b23f329451ac768b7d9eab5931df2d)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ef6888dffa95e1fbf74dd80e48034f3591a32959)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the creation of a new KMACHINE glossary item, there were two
areas in the YP doc set that reference the variable. I added
cross-reference tags. Also noted that some other references
were missing to the variable COMPATIBLE_MACHINE.
(From yocto-docs rev: f740b62be175a50f17ce8a244258dcf391fcf672)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Created a new glossary entry for the KMACHINE variable. I used
Bruce Ashfield as my resource for understanding this variable.
(From yocto-docs rev: 1069ddb3fe0b3bd00ba651b51419354258ae57d3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I have updated both the section for configuration fragments found
in the BSP and dev manuals.
Reported-by: James Abernathy <jabernathy@gmail.com>
(From yocto-docs rev: 62f4df751c80e7b749356bb80ade3a7847411f7c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should not use "latest" any longer for this variable. The
string is fine in URLs that might appear on a website but the actual
variable should be set to the release number. This way when we
go to release the version of the docs they do not have to be reset
with a post-release commit to change the variable from "lastest" to
"1.3".
(From yocto-docs rev: f97122847e65c223173fabb793ef1ddb04605e62)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor edits to create some links to some terms used.
(From yocto-docs rev: 1559b8caca07cce8630de9ddf8c84f0b24fa35e7)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I made a pass through this chapter and focused on better descriptions for
getting the system ready for application development. I made adjustments
to better represent what is really being done. It is not all ADT here
as was being described before. Miscellaneous edits and improvements
throughout.
(From yocto-docs rev: 3544beda4794005fe139d7620fd13618fab05534)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I edited the text so that the purpose of the manual is clearer.
I have segmented out the ADT into distinct components and made sure
the overviews of each is good. Edits to clarify the role of the
ADT as well.
(From yocto-docs rev: c4abd8305dcdba986f1e761887c740e8322bb331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
figure updated to reflect new manual title.
(From yocto-docs rev: 420bad21ffe1d1fd60a1bbbe66f3e1463b80cff9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
final changes to the section that talks about configuring the kernel.
Changes here based off Bruce Ashfield's review comments.
(From yocto-docs rev: 7715643f2a24336585dd44d1d75e7be0aade7f6b)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The string used for the link anchor for the "What You Need and
How You Get It" section in the YP QS used "resources". This
string is actually used as the chapter id for the resources
chapter in the YP ref manual. I changed the string in the QS
from "resources" to "yp-resourses" to make it unique. There was
one instance in the YP ref manual where a cross-reference to the
section occurred. I fixed that as well.
(From yocto-docs rev: 58c1e4e327cb489e037bbde170c4c495f4567392)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Caught and fixed a stray reference to "appendix" that should be
"chapter."
(From yocto-docs rev: 97d26495dd9b561bb5724a86e9cd777eeef9f71a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Converted the "Resources" appendix to a chapter. I also made sure all
the references to the chapter use proper term now, which is "chapter".
(From yocto-docs rev: bf7212b72d54a2696c16dcc1c0a19681f23fbc1c)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "faq" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 6e090132823e3b121d00d9116b0693c922156b32)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-varlocality" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: d666a3f6581bb114c6c15d63ef850678c398b247)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-varibales-gloss" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 3f541c20c7aff1012eb4c06cb856bf9795124822)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-imagese" and "ref-features" appendices
to chapters and made any references in the doc set use the proper
term now (chapter).
(From yocto-docs rev: 08117634034a5cd5567c971957583d986c9ee9a4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-classes" appendix to a chapter and
made sure any references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 54991c7fb0a2d3a894249f8a253b1a974cf2e571)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-bitbake" appendix to a chapter and
made sure the single in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 1086155dd6e67a9c75e99332a9ad122dc04ec7a1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As part of moving the reference manual to a real reference manual I
am removing the "appendix" classification and having everthing be
a chapter. I changed the "ref-structure" appendix to a chapter and
made sure the two references in the doc set use the proper term now
(chapter).
(From yocto-docs rev: 840a3e4dab355e53fdb400674bd6765957b24066)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: ddee80872afc567b9381387980f257b337f29ea1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removing the Development chapter resulted in some links being
re-defined to go to the YP Development manual. Also, the
poky-ref-manual.xml file had to be altered to not include the
chapter. Any sort of residual cleanup needed as a result of
getting rid of this chapter is handled in this commit.
(From yocto-docs rev: f8d113654b33ed5f6f1ba8e2d2e755b78033ddbf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The Development chapter has been emptied out so it is now deleted from
the reference manual. All relevant topics now reside in the YP
Development Manual.
(From yocto-docs rev: aa30971ea0b23c19e3fefcb48db8aa4c0db8e95e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added the section "Using an External SCM" to the "Common Tasks"
chapter. This information was formerly in the YP Reference Manual
in the old development chapter.
(From yocto-docs rev: d34cd9e86cb7a6b27cf6a5b4daf58c445dd86331)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the "Development Using a Development Shell" section. This
section was moved to the YP Development manual into the "Common
Development Models" chapter.
(From yocto-docs rev: 4222ce12d620bf3cd98ae80b19402cf59cca3d3f)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I inserted the section "Using a Development Shell" into the "Common
Development Models" chapter. This information was formerly in the
YP Reference Manual and is being moved out to help the ref manual
become a truer reference manual.
(From yocto-docs rev: f4ca1c567afcebbae119f21c147e3c38c7ffd54e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a scrub for "Yocto Project" and found some that could be
changed.
(From yocto-docs rev: 985062b6a9320e8a3ca3d3dafb6516db4fbc5bd5)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the FAQ entry on "How do I use an external toolchain."
Comments were from Richard Purdie.
(From yocto-docs rev: db3986d2eff17087eb141ac0f4dfed55ff753368)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a bit of detail to the install toolchain example to explain
that the user needs to be in the root directory.
(From yocto-docs rev: afb294f6e0997b72f11d9e9d31b3b22d083c2dad)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
New finalized entry for KBRANCH. Reviewed by Bruce Ashfield.
(From yocto-docs rev: 566e112d20ebe91a1302263b96254f6f66462aaf)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some work in progress.
(From yocto-docs rev: d344b2db75c21bc7050e4a5f70c07ffd8f7545de)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I missed a "Yocto Project Files" term because the damn thing split
across two lines in the source file and my grep method did not find
it. Changed it to "source directory."
(From yocto-docs rev: 31a261c141d3e26f4a87b9725097005c96345e2e)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Mentioned at the very end of the beagleboard build that the image
can now be run on the target hardware.
Also, specically noted the local.conf file as "conf/local.conf" in
the build directory.
Reported-by: Kevin Strasser <keven.strasser@intel.com>
(From yocto-docs rev: a4b41c7f5e8e8017401961097e0df4b13458ac24)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Minor fixes to some links and some typos.
(From yocto-docs rev: 8d1f53bca404461f8edc526d5e144ef7d76f0594)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I did a scrub for the term "Yocto" and substituted appropriately.
This resulted in the term "Yocto Project build system" going away and
being replaced by "OpenEmbedded build system." The "Yocto Project
build directory" was replaced by "build directory." I also found a few
little things that were wrong like including the Debian distro in the
list of supported distros so I removed that. Finally, a spell check
produced a couple of fixes.
(From yocto-docs rev: 6957658982516aa4b0e4726c9344c46854aa11d3)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I fixed several "Yocto Project build system" terms and some "Yocto
Project Build Directory" terms.
(From yocto-docs rev: 10c1d50380336ac684243525646ac9aa3c1812d4)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Found a stray reference to "Yocto Project Build Directory." I changed
to "build directory."
(From yocto-docs rev: e0c593ac162c61f7d42625482b95c253d0f8622a)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the build/tmp/log directory description to mention that running
a build does not necessarily mean a log directory is created. Also,
ran a spell check and found a typo.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: c602919a1f188a4dff23f965bcc52b635f9a92ae)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
the section describing meta/recipes.txt had the "/" character at the
end of the filename, which is incorrect. I removed this.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 28295d8c46d3a2cc6b53f0a7ccea35f1db77d1df)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made a few edits to better describe how the scripts and bin/bitbake
directories are placed into the PATH variable.
Reported-by: Paul Eggleton <paul.eggleton@linux.intel.com>
(From yocto-docs rev: 1e45731898935d40db6e6705f60bdea9633255ab)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The description of how BitBake is run and where its executable and
wrapper script reside has been updated to be more accurate.
Reported-by: Robert J. P. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 885b4c42a3ec3d228f1f5659a887627f4fe2d939)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The section on "Dependency Graphs" failed to mention the
package-depends.dot file among the files. Added this file to the
list.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 0ebf8ddf54e146454d6f300f790964decaeec6a9)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
this information was missing in the appendix.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64ea0871e0a6cef45259502ff26e1c5b5a66cac1)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Information about this directory was absent in the manual.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
(From yocto-docs rev: 64e5f5a403e4c8494885c7da504194d1baecb0ed)
Signed-off-by: Scott Rifenbark <scott.m.rifenbark@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>