u-boot/include/configs
Michal Simek 4e779ad2e5 gpio: Add support for microblaze xilinx GPIO
Microblaze uses gpio which is connected to the system reset.
Currently gpio subsystem wasn't used for it.

Add gpio driver and change Microblaze reset logic to be done
via gpio subsystem.

There are various configurations which Microblaze can have
that's why gpio_alloc/gpio_alloc_dual(for dual channel)
function has been introduced and gpio can be allocated
dynamically.

Adding several gpios IP is also possible and supported.

For listing gpio configuration please use "gpio status" command

This patch also remove one compilation warning:
microblaze-generic.c: In function 'do_reset':
microblaze-generic.c:38:47: warning: operation on '*1073741824u'
 may be undefined [-Wsequence-point]

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
2013-05-09 11:20:08 +02:00
..
km arm/km: use CONFIG_NAND_ECC_BCH 2013-04-12 21:42:17 +05:30
manroland COMMON: Use __stringify() instead of xstr() 2012-10-15 11:53:47 -07:00
A3000.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
ADS860.h Makefile: move all Power Architecture boards into boards.cfg 2010-10-18 22:12:04 +02:00
APC405.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
AR405.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
ASH405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
Adder.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
AdderUSB.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
Alaska8220.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
B4860QDS.h powerpc/b4860qds: Added Support for B4860QDS 2013-01-30 11:25:11 -06:00
BC3450.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
BSC9131RDB.h powerpc/mpc85xx:Add BSC9131 RDB Support 2012-07-06 17:30:29 -05:00
BSC9132QDS.h powerpc/85xx: Add BSC9132QDS support 2013-01-30 11:25:14 -06:00
CANBT.h ppc4xx: Cleanup for partial linking and --gc-sections 2010-11-27 23:35:09 +01:00
CATcenter.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
CMS700.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
CPC45.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
CPCI2DP.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
CPCI405.h 4xx: Fix PCI memory mapping on CPCI405 boards 2012-12-06 15:53:04 +01:00
CPCI405AB.h 4xx: Fix PCI memory mapping on CPCI405 boards 2012-12-06 15:53:04 +01:00
CPCI405DT.h 4xx: Fix PCI memory mapping on CPCI405 boards 2012-12-06 15:53:04 +01:00
CPCI750.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
CPCI4052.h 4xx: Fix PCI memory mapping on CPCI405 boards 2012-12-06 15:53:04 +01:00
CPCIISER4.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
CPU86.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
CPU87.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
CRAYL1.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
CU824.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
DB64360.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
DB64460.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
DP405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
DU405.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
DU440.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
ELPPC.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
ELPT860.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
EP88x.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
ESTEEM192E.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
EVB64260.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
EXBITGEN.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
FADS823.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
FADS850SAR.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
FADS860T.h Makefile: move all Power Architecture boards into boards.cfg 2010-10-18 22:12:04 +02:00
FLAGADM.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
FPS850L.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
FPS860L.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
G2000.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
GEN860T.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
GENIETV.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
HH405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
HIDDEN_DRAGON.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
HUB405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
HWW1U1A.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
ICU862.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
IDS8247.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
IP860.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
IPHASE4539.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
ISPAN.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
IVML24.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
IVMS8.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
IceCube.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
JSE.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
KAREF.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
KUP4K.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
KUP4X.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
M5208EVBE.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5235EVB.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5249EVB.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5253DEMO.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
M5253EVBE.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5271EVB.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
M5272C3.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5275EVB.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5282EVB.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5329EVB.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5373EVB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
M5475EVB.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M5485EVB.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M52277EVB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
M53017EVB.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
M54418TWR.h ColdFire: Remove save env in NAND support for M54418TWR board. 2012-10-29 22:08:32 +08:00
M54451EVB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
M54455EVB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MBX.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
MBX860T.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
MERGERBOX.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
METROBOX.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
MHPC.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
MIP405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MOUSSE.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
MPC86xADS.h Makefile: move all Power Architecture boards into boards.cfg 2010-10-18 22:12:04 +02:00
MPC832XEMDS.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MPC837XEMDS.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MPC837XERDB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC885ADS.h Makefile: move all Power Architecture boards into boards.cfg 2010-10-18 22:12:04 +02:00
MPC8260ADS.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8266ADS.h powerpc: cpm2 boards: update fcc register logic 2011-10-17 22:25:31 +02:00
MPC8308RDB.h cleanup: introduce CONFIG_MPC830x 2012-10-23 15:23:25 -05:00
MPC8313ERDB.h Makefile: Change CONFIG_SPL_PAD_TO to image offset 2013-04-12 07:55:06 +02:00
MPC8315ERDB.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MPC8323ERDB.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8349EMDS.h powerpc/mpc83xx: increment malloc heap size 2012-07-03 11:07:21 -05:00
MPC8349ITX.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8360EMDS.h powerpc/mpc83xx: increment malloc heap size 2012-07-03 11:07:21 -05:00
MPC8360ERDK.h powerpc/mpc83xx: increment malloc heap size 2012-07-03 11:07:21 -05:00
MPC8536DS.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8540ADS.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MPC8541CDS.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MPC8544DS.h powerpc/mpc8544ds: Add USB controller support for MPC8544DS 2013-01-30 11:25:10 -06:00
MPC8548CDS.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8555CDS.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MPC8560ADS.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MPC8568MDS.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MPC8569MDS.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
MPC8572DS.h powerpc/mpc8572ds: Enable bank interleaving to cs0+cs1 for dual-rank DIMMs 2013-01-30 11:25:09 -06:00
MPC8610HPCD.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MPC8641HPCN.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MUSENKI.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
MVBC_P.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MVBLM7.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MVBLUE.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
MVS1.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
MVSMR.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
MigoR.h CMD: Drop CONFIG_CMD_DFL, it's not used 2012-04-19 22:01:13 +02:00
NETPHONE.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
NETTA.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
NETTA2.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
NETVIA.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
NSCU.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
NX823.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
OCRTC.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
ORSG.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
P1_P2_RDB.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
P3G4.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
P1010RDB.h powerpc/corenet_ds: move SATA config to board configuration 2012-11-27 18:28:07 -06:00
P1022DS.h P1022DS: Set CONFIG_SPL_MAX_SIZE directly 2013-05-03 09:19:43 -04:00
P1023RDS.h powerpc/qoriq: Move FMAN microcode location 2012-11-27 18:25:55 -06:00
P2020COME.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
P2020DS.h corenet: Disable video on P2020DS 2013-01-30 11:25:16 -06:00
P2041RDB.h powerpc/p2041: set RCW and PBI files for .pbl build or P2041RDB 2013-01-30 11:25:12 -06:00
P3041DS.h powerpc/corenet_ds: move SATA config to board configuration 2012-11-27 18:28:07 -06:00
P4080DS.h powerpc/85xx: move SRIO configuration out of corenet_ds.h 2012-10-22 14:31:13 -05:00
P5020DS.h powerpc/corenet_ds: move SATA config to board configuration 2012-11-27 18:28:07 -06:00
P5040DS.h powerpc/85xx: add support for the Freescale P5040DS Superhydra reference board 2012-11-27 18:28:06 -06:00
PATI.h board/mpl/pati: use the CFI driver for the PATI board 2012-01-09 09:25:07 +01:00
PCI405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
PCI5441.h Timer: Allow reset_timer() only for systems with low resolution timers 2011-07-26 14:52:53 +02:00
PIP405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
PK1C20.h nios2: remove asm/status_led.h 2012-11-10 19:45:58 +08:00
PLU405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
PM520.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
PM826.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
PM828.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
PMC405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
PMC405DE.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
PMC440.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
PN62.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
PPChameleonEVB.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
QS823.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
QS850.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
QS860T.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
R360MPI.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
RBC823.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
RPXClassic.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
RPXlite.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
RPXlite_DW.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
RPXsuper.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
RRvision.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
Rattler.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
SIMPC8313.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
SM850.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
SPD823TS.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
SXNI855T.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
Sandpoint8240.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
Sandpoint8245.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
T4240QDS.h powerpc/t4qds: Add T4QDS board 2012-10-22 15:52:46 -05:00
TASREG.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
TB5200.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
TK885D.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TOP860.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
TOP5200.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
TQM823L.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
TQM823M.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
TQM834x.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
TQM850L.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM850M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM855L.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM855M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM860L.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM860M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM862L.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM862M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM866M.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM885D.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
TQM5200.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
TQM8260.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
TQM8272.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
Total5200.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
VCMA9.h VCMA9: Enable CONFIG_CMD_NAND_YAFFS 2013-04-12 22:08:55 +02:00
VOH405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
VOM405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
VoVPN-GW.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
W7OLMC.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
W7OLMG.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
WUH405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
Yukon8220.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
ZPC1900.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
ZUMA.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
a3m071.h mpc5200: a3m071/a4m2k: Miscellaneous updates and fixes 2013-05-02 20:46:08 +02:00
a4m072.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
a320evb.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
ac14xx.h mpc512x: add ifm ac14xx board 2013-03-09 08:22:57 +01:00
acadia.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
actux1.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
actux2.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
actux3.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
actux4.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
adp-ag101.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
adp-ag101p.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
adp-ag102.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
aev.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
afeb9260.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
alpr.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
am335x_evm.h Merge branch 'u-boot/master' into 'u-boot-arm/master' 2013-04-12 22:07:57 +02:00
am3517_crane.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
am3517_evm.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
amcc-common.h amcc-common.h: enable support for "env grep", "setexpr", and regex. 2013-05-01 16:24:01 -04:00
ap325rxa.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
ap_sh4a_4a.h sh: Add support for AP-SH4A-4A board 2012-05-28 09:12:54 +09:00
apx4devkit.h Merge branch 'u-boot-imx/master' into 'u-boot-arm/master' 2013-03-15 15:18:31 +01:00
aria.h mpc512x: use common code for clock setting for all mpc512x boards 2013-03-09 08:22:23 +01:00
armadillo-800eva.h rmobile: armadillo-800eva: Remove CONFIG_SYS_NO_L2CACHE 2012-10-03 02:04:26 +02:00
aspenite.h Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT 2011-05-31 23:51:55 +02:00
astro_mcf5373l.h COMMON: Use __stringify() instead of rest of implementations 2012-10-15 11:53:47 -07:00
at91rm9200ek.h arm: at91/configs: add bootz to configuration 2013-03-12 12:46:24 +01:00
at91sam9m10g45ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
at91sam9rlek.h arm: at91/configs: add bootz to configuration 2013-03-12 12:46:24 +01:00
at91sam9x5ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
at91sam9260ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
at91sam9261ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
at91sam9263ek.h ARM: at91: change nand flash table 2013-03-12 12:46:54 +01:00
atc.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
atngw100.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atngw100mkii.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atstk1002.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atstk1003.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atstk1004.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
atstk1006.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
balloon3.h serial: pxa: Make use of default_serial_console in serial_pxa 2012-10-15 11:53:48 -07:00
bamboo.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
bct-brettl2.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
beaver.h Tegra: T30: Beaver board support. 2013-04-15 16:13:51 -07:00
bf506f-ezkit.h Blackfin: bf506f-ezkit: disable import/export env commands 2011-04-25 02:02:51 -04:00
bf518f-ezbrd.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
bf525-ucr2.h Blackfin: bf525-ucr2: new board port 2011-04-08 00:44:26 -04:00
bf526-ezbrd.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
bf527-ad7160-eval.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
bf527-ezkit.h Blackfin: easylogo: add lzma logos 2012-02-03 20:44:54 -05:00
bf527-sdp.h Blackfin: move CONFIG_BFIN_CPU back to board config.h 2011-04-08 00:44:26 -04:00
bf533-ezkit.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
bf533-stamp.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
bf537-minotaur.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
bf537-pnav.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
bf537-srv1.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
bf537-stamp.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
bf538f-ezkit.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
bf548-ezkit.h Blackfin: easylogo: add lzma logos 2012-02-03 20:44:54 -05:00
bf561-acvilon.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
bf561-ezkit.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
bf609-ezkit.h blackfin: bf60x: add hw watchdog support 2013-03-04 13:42:07 +08:00
bfin_adi_common.h blackfin: bf60x: add board and headers files to support bf609 2013-03-04 13:42:07 +08:00
blackstamp.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
blackvme.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
bluestone.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
br4.h Blackfin: br4: new board port 2012-02-12 15:03:25 -05:00
bubinga.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
ca9x4_ct_vxp.h versatile: board configs: Use buffered writes on flash 2012-10-18 15:59:55 +02:00
calimain.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
cam_enc_4xx.h cam_enc_4xx: convert to CONFIG_SPL_MAX_FOOTPRINT 2013-04-14 16:07:54 +02:00
canmb.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
canyonlands.h nand_spl: store ecc data on the stack 2012-01-26 16:09:06 -06:00
cardhu.h tegra: spi: rename tegra SPI drivers 2013-03-25 09:56:05 -07:00
charon.h mpc52xx, charon: change mtd default partitions 2010-12-17 20:15:12 +01:00
cm-bf527.h NAND: remove NAND_MAX_CHIPS definitions 2012-01-26 16:08:55 -06:00
cm-bf533.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
cm-bf537e.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
cm-bf537u.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
cm-bf548.h Blackfin: easylogo: add lzma logos 2012-02-03 20:44:54 -05:00
cm-bf561.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
cm41xx.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
cm4008.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
cm5200.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
cm_t35.h cm-t35: add support for loading splash image from NAND 2013-03-22 10:57:00 -04:00
cmi_mpc5xx.h 5xx: Cleanup for partial linking and --gc-sections 2010-11-27 23:35:11 +01:00
cobra5272.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
cogent_common.h
cogent_mpc8xx.h 8xx: Cleanup for partial linking and --gc-sections 2010-11-27 23:35:10 +01:00
cogent_mpc8260.h 8260: Cleanup for partial linking and --gc-sections 2010-11-27 23:35:12 +01:00
colibri_pxa270.h serial: pxa: Make use of default_serial_console in serial_pxa 2012-10-15 11:53:48 -07:00
colibri_t20_iris.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
coreboot.h x86: config: Init PCI before SPI 2013-04-15 16:26:43 -07:00
corenet_ds.h powerpc/85xx: set USB2 default mode to 'device' for (super)hydra boards 2013-05-02 16:57:34 -05:00
cpci5200.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
cpu9260.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
cpuat91.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
csb272.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
csb472.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
da830evm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
da850evm.h da850evm, da850_am18xxevm: convert to CONFIG_SPL_MAX_FOOTPRINT 2013-04-14 16:08:08 +02:00
dalmore.h Tegra114: MMC: Enable DT MMC driver support for Tegra114 Dalmore boards 2013-03-25 09:56:08 -07:00
davinci_dm355evm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_dm355leopard.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_dm365evm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_dm6467evm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_dvevm.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_schmoogie.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_sffsdr.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
davinci_sonata.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
dbau1x00.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
debris.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
devkit3250.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
devkit8000.h OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define 2013-03-01 12:01:32 -05:00
dig297.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
digsy_mtc.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
dkb.h dkb: make mmc command as default enabled 2011-10-27 21:56:37 +02:00
dlvision-10g.h powerpc/ppc4xx: Support gdsys dlvision-10g hardware 1.20 2012-04-30 15:01:11 +02:00
dlvision.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
dnp5370.h common: cosmetic: CONFIG_ROOTPATH checkpatch compliance 2011-10-22 01:21:15 +02:00
dns325.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
dockstar.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
dra7xx_evm.h omap5_uevm.h: Move uEVM-specific choices to omap5_uevm.h 2013-04-08 11:40:56 -04:00
dreamplug.h ARM: dreamplug: Enable FDT support 2012-05-15 08:31:21 +02:00
dvlhost.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
eXalion.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
ea20.h Merge u-boot/master into u-boot-ti/master 2013-03-11 12:16:13 -04:00
eb_cpu5282.h coldfire: eb_cpu5282: fix: boot from internal flash 2012-12-19 15:51:58 -07:00
eb_cpux9k2.h arm: atmel: cpux9k2: add missing cache configs 2012-11-04 15:56:52 +01:00
ebony.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
eco5pk.h eco5pk: Add new board and default config 2012-10-30 15:28:06 -07:00
ecovec.h sh: Set CONFIG_SH_ETHER_PHY_MODE and CONFIG_SH_ETHER_SH7734_MII to boards with sh_eth 2012-05-28 09:12:54 +09:00
edminiv2.h edminiv2: increase malloc len to 256K 2012-10-03 16:43:13 +05:30
enbw_cmc.h COMMON: Use __stringify() instead of xstr() 2012-10-15 11:53:47 -07:00
ep82xxm.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
ep8248.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
ep8260.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
espt.h sh: Set CONFIG_SH_ETHER_PHY_MODE and CONFIG_SH_ETHER_SH7734_MII to boards with sh_eth 2012-05-28 09:12:54 +09:00
ethernut5.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
exynos5250-dt.h Merge branch 'master' of git://git.denx.de/u-boot-arm into HEAD 2013-04-18 16:16:01 -04:00
favr-32-ezkit.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
flea3.h COMMON: Use __stringify() instead of xstr() 2012-10-15 11:53:47 -07:00
fx12mm.h mtd: MTD related config header changes (mtdparts command) 2009-06-12 20:45:47 +02:00
galaxy5200.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
gdppc440etx.h powerpc/ppc4xx: Update gdsys board configurations 2012-04-30 15:01:17 +02:00
gplugd.h CMD: Remove CMD_AUTOSCRIPT, it's not used 2012-04-19 22:01:12 +02:00
gr_cpci_ax2000.h sparc: fix unknown escape sequence warnings 2011-12-05 21:55:24 +01:00
gr_ep2s60.h sparc: fix unknown escape sequence warnings 2011-12-05 21:55:24 +01:00
gr_xc3s_1500.h sparc: fix unknown escape sequence warnings 2011-12-05 21:55:24 +01:00
grasshopper.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
grsim.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
grsim_leon2.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
guruplug.h kirkwood: guruplug: Relocate NAND environment area 2010-10-28 19:02:12 +05:30
gw8260.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
h2_p2_dbg_board.h arch/arm/include/asm/sizes.h: cleanups 2010-10-13 09:59:33 +02:00
h2200.h h2200: Add USB CDC ethernet support 2012-12-17 15:38:14 +01:00
hammerhead.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
harmony.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
hawkboard.h spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. 2012-11-26 15:41:25 -06:00
hermes.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
highbank.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
hmi1001.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
hymod.h powerpc: cpm2 boards: update fcc register logic 2011-10-17 22:25:31 +02:00
ib62x0.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
ibf-dsp561.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
icon.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
iconnect.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
idmr.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
igep00x0.h omap3_beagle: Flush UART3 xmit on enable if TEMT is broken 2013-04-08 11:29:05 -04:00
ima3-mx53.h mx5/6: Define default SoC input clock frequencies 2012-10-15 11:54:10 -07:00
imx27lite-common.h COMMON: Use __stringify() instead of xstr() 2012-10-15 11:53:47 -07:00
imx27lite.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
imx31_litekit.h power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER 2012-11-14 11:21:12 +01:00
imx31_phycore.h mx31: Define default SoC input clock frequencies 2012-09-06 14:23:30 +02:00
incaip.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
inka4x0.h common: cosmetic: CONFIG_BOOTFILE checkpatch compliance 2011-10-22 01:21:35 +02:00
integrator-common.h integrator: enable device tree 2013-04-12 22:25:29 +02:00
integratorap.h integrator: break out common config 2012-09-04 08:51:13 -07:00
integratorcp.h integrator: break out common config 2012-09-04 08:51:13 -07:00
intip.h powerpc/ppc4xx: Update gdsys board configurations 2012-04-30 15:01:17 +02:00
io.h powerpc/ppc4xx: Update gdsys board configurations 2012-04-30 15:01:17 +02:00
io64.h powerpc/ppc4xx: Update gdsys board configurations 2012-04-30 15:01:17 +02:00
iocon.h powerpc/ppc4xx: Update gdsys board configurations 2012-04-30 15:01:17 +02:00
ip04.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
ipek01.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
jadecpu.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
jornada.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
jupiter.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
katmai.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
kilauea.h CMD: Remove CMD_LOG, it's unused 2012-04-19 22:01:13 +02:00
km82xx.h powerpc/82xx: adapt SDRAM settings for mgcoge3ne 2012-07-31 22:36:38 +02:00
km8360.h powerpc/83xx: use NAND_ECC_BCH for kmcoge5ne 2013-02-15 17:47:20 -06:00
km_kirkwood.h arm/km: add support for kmsuv31 board 2013-04-12 21:42:22 +05:30
korat.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
kvme080.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
kzm9g.h i2c: sh_i2c.c: support I2C2, I2C3 and I2C4 2012-10-16 05:47:20 +02:00
lacie_kw.h ARM: add support for d2 Network v2 2012-10-03 16:43:12 +05:30
linkstation.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
lsxl.h lsxl: unset ncip for rescue mode 2013-01-09 04:12:11 +05:30
luan.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
lubbock.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
lwmon.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
lwmon5.h ppc4xx: Add lcd4_lwmon5 support 2013-04-22 09:53:53 +02:00
m28evk.h m28evk: enable "env grep" and regexp support 2013-05-01 16:24:01 -04:00
magnesium.h arm, i.mx27: add support for magnesium board from projectiondesign 2010-04-30 05:23:23 -05:00
makalu.h CMD: Remove CMD_LOG, it's unused 2012-04-19 22:01:13 +02:00
mcc200.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
mcx.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
mecp5123.h mpc512x: use common code for clock setting for all mpc512x boards 2013-03-09 08:22:23 +01:00
mecp5200.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
medcom-wide.h Tegra: Medcom-Wide: Enable NAND and boot script support 2013-04-15 11:01:37 -07:00
meesc.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
microblaze-generic.h gpio: Add support for microblaze xilinx GPIO 2013-05-09 11:20:08 +02:00
mimc200.h avr32: allow multi block mmc access for all boards 2012-11-02 13:17:39 +01:00
mini2440.h ARM : Add support for MINI2440 (s3c2440). 2012-10-03 10:50:27 +02:00
ml507.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
motionpro.h mpc52xx/motionpro: fix monitor size and update default environment 2012-10-02 11:55:45 -07:00
mpc5121-common.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
mpc5121ads.h mpc512x: use common code for clock setting for all mpc512x boards 2013-03-09 08:22:23 +01:00
mpc7448hpc2.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
mpc8308_p1m.h cleanup: introduce CONFIG_MPC830x 2012-10-23 15:23:25 -05:00
mpq101.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
mpr2.h common: cosmetic: CONFIG_BOOTFILE checkpatch compliance 2011-10-22 01:21:35 +02:00
ms7720se.h common: cosmetic: CONFIG_BOOTFILE checkpatch compliance 2011-10-22 01:21:35 +02:00
ms7722se.h CMD: Drop CONFIG_CMD_DFL, it's not used 2012-04-19 22:01:13 +02:00
ms7750se.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
mt_ventoux.h OMAP3: mt_ventoux: added video support 2012-09-04 17:05:39 -07:00
muas3001.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
mucmc52.h Makefile: move all Power Architecture boards into boards.cfg 2010-10-18 22:12:04 +02:00
munices.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
mv-common.h mv-common.h: increase malloc arena to 4MiB 2013-01-09 04:12:11 +05:30
mv88f6281gtw_ge.h kirkwood: added common config file mv-common.h 2010-10-13 09:36:10 +02:00
mx1ads.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
mx6_common.h ARM: mx6: use common CPU errata config options 2013-03-07 18:20:37 +01:00
mx6qarm2.h ARM: mx6: use common CPU errata config options 2013-03-07 18:20:37 +01:00
mx6qsabre_common.h mx6qsabre{sd, auto}: Fix environment as 'mmc rescan' takes no arguments 2013-04-13 17:44:37 +02:00
mx6qsabreauto.h mx6qsabre_common: Let mmc partition be board specific 2013-01-28 06:45:18 +01:00
mx6qsabrelite.h mx6qsabrelite: Remove duplicate 'mmc dev' 2013-04-03 11:40:44 +02:00
mx6qsabresd.h mx6qsabresd: Fix booting the kernel from SDHC3 2013-01-13 12:04:47 +01:00
mx23_olinuxino.h mx23_olinuxino: Fix netboot console 2013-04-03 11:28:40 +02:00
mx23evk.h mx23evk: Enable USB support 2013-03-07 17:22:58 +01:00
mx25pdk.h mx25pdk: Enable imxdi RTC 2013-04-03 11:26:12 +02:00
mx28evk.h mx28evk: Guard NAND-related ENV defines with CONFIG_ENV_IS_IN_NAND 2013-05-01 16:41:10 -04:00
mx31ads.h power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER 2012-11-14 11:21:12 +01:00
mx31pdk.h mx31pdk: add CONFIG_SPL_LIBGENERIC_SUPPORT 2013-05-01 16:24:02 -04:00
mx35pdk.h mx35pdk: Allow booting of a device tree kernel 2012-12-26 11:58:50 +01:00
mx51_efikamx.h Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged 2012-12-19 13:02:36 -08:00
mx51evk.h mx51evk: Remove unneeded comment 2013-01-05 18:04:47 +01:00
mx53ard.h imx: mx53ard: Add support for NAND Flash 2013-04-12 07:55:04 +02:00
mx53evk.h Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged 2012-12-19 13:02:36 -08:00
mx53loco.h mx53loco: Add support to dynamically choose between fdt use or not 2013-01-13 11:53:45 +01:00
mx53smd.h configs: Fix usage of mmc rescan 2012-10-23 08:33:17 -07:00
neo.h powerpc/ppc4xx: Make gdsys 405ep boards reset more generic 2012-04-30 15:00:56 +02:00
nhk8815.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
nios2-generic.h nios2: remove asm/status_led.h 2012-11-10 19:45:58 +08:00
nitrogen6x.h Add Boundary Devices Nitrogen6X boards 2013-03-13 09:04:24 +01:00
nokia_rx51.h RX-51: Add support for bootmenu 2013-03-29 09:35:34 +01:00
o2d.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2d300.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2dnt-common.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2dnt2.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2i.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o2mnt.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
o3dnt.h mpc52xx: add common o2dnt and o2dnt2 support and configurations 2012-09-01 14:22:02 +02:00
ocotea.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
omap3_beagle.h omap3_beagle: Enable CONFIG_CMD_BOOTZ 2013-03-11 11:06:09 -04:00
omap3_evm.h omap3_evm: Let CONFIG_EFI_PARTITION be set for SPL 2012-12-13 13:58:27 -07:00
omap3_evm_common.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap3_evm_quick_mmc.h OMAP3: Add SPL support to omap3_evm 2011-12-06 23:59:38 +01:00
omap3_evm_quick_nand.h spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. 2012-11-26 15:41:25 -06:00
omap3_logic.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap3_mvblx.h omap3: mvblx: pass FPGA version to the kernel 2013-02-18 13:51:20 -05:00
omap3_overo.h spl/nand: introduce CONFIG_SPL_NAND_DRIVERS, _BASE, and _ECC. 2012-11-26 15:41:25 -06:00
omap3_pandora.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
omap3_sdp3430.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap3_zoom1.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap3_zoom2.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
omap4_common.h ARM: OMAP4/5: Make bootz as the default boot command 2013-04-08 11:29:05 -04:00
omap4_panda.h omap4_panda: remove CONFIG_PANDA, not used 2012-10-01 10:10:33 -07:00
omap4_sdp4430.h mmc: omap: config VMMC, MMC1_PBIAS 2011-09-30 22:00:55 +02:00
omap5_common.h omap5_common.h: Switch to ext4 2013-04-12 15:29:23 -04:00
omap5_uevm.h omap5_uevm: Enable redundant MMC environment 2013-05-01 16:41:10 -04:00
omap730.h arch/arm/include/asm/sizes.h: cleanups 2010-10-13 09:59:33 +02:00
omap730p2.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
omap1510.h arch/arm/include/asm/sizes.h: cleanups 2010-10-13 09:59:33 +02:00
omap1510inn.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
omap2420h4.h omap2420-h4: Fix get_timer() and CONFIG_SYS_HZ 2013-04-08 11:29:05 -04:00
omap5912osk.h omap5912-osk: Fix get_timer() and CONFIG_SYS_HZ 2013-04-10 16:03:02 -04:00
openrd.h Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT 2011-05-31 23:51:55 +02:00
openrisc-generic.h openrisc: Add openrisc-generic example board 2012-01-13 21:17:00 +01:00
origen.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
otc570.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
p1_p2_rdb_pc.h Makefile: Change CONFIG_SPL_PAD_TO to image offset 2013-04-12 07:55:06 +02:00
p3mx.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
p3p440.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
palmld.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
palmtc.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
paz00.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
pb1x00.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
pcm030.h Remove remnants of obsolete CONFIG_SYS_GBL_DATA_SIZE comments 2011-05-12 23:04:55 +02:00
pcm051.h am33xx: Add required includes to some omap/am33xx code 2013-03-24 12:49:11 -04:00
pcs440ep.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
pdm360ng.h mpc512x: use common code for clock setting for all mpc512x boards 2013-03-09 08:22:23 +01:00
pdnb3.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
pf5200.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
plutux.h Tegra: Plutux: Enable NAND and boot script support 2013-04-15 11:01:37 -07:00
pm9g45.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
pm9261.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
pm9263.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
pogo_e02.h kirkwood: add support for Cloud Engines Pogoplug E02 2012-05-15 08:31:22 +02:00
ppmc7xx.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
ppmc8260.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
pr1.h Blackfin: pr1: new board port 2012-02-12 15:03:25 -05:00
pxa-common.h PXA: Introduce common configuration header for PXA 2011-12-06 23:59:33 +01:00
pxa255_idp.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
qemu-mips.h MIPS: qemu_mips.h: cleanup coding style and checkpatch.pl issues 2012-10-16 15:02:08 +02:00
qemu-mips64.h MIPS: add board qemu-mips64 support 2012-10-16 15:02:08 +02:00
qi_lb60.h MIPS: factor out endianess flag handling to arch config.mk 2012-08-24 00:34:43 +02:00
qong.h mx31/mx35/mx51/mx53/mx6: add watchdog 2013-01-13 11:39:57 +01:00
quad100hd.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
quantum.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
r0p7734.h sh: Set CONFIG_SH_ETHER_PHY_MODE and CONFIG_SH_ETHER_SH7734_MII to boards with sh_eth 2012-05-28 09:12:54 +09:00
r2dplus.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
r7780mp.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
rd6281a.h Kirkwood: boards cleanup for deprecated CONFIG_CMD_AUTOSCRIPT 2011-05-31 23:51:55 +02:00
redwood.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
rpi_b.h ARM: bcm2835: fix get_timer() to return ms 2013-04-04 08:14:54 +02:00
rsdproto.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
rsk7203.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
rsk7264.h sh: Fix sh7264 clock speed and related serial setting 2012-03-08 10:26:32 +09:00
rsk7269.h sh: Add SH7269 device and RSK2+SH7269 board 2012-05-28 09:12:54 +09:00
s5p_goni.h power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER 2012-11-14 11:21:12 +01:00
s5pc210_universal.h Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged 2012-12-19 13:02:36 -08:00
sacsng.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
sandbox.h sandbox: config: Enable CONFIG_FIT and CONFIG_CMD_FIT 2013-05-01 11:17:21 -04:00
sbc35_a9g20.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
sbc405.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
sbc8349.h powerpc/mpc83xx: increment malloc heap size 2012-07-03 11:07:21 -05:00
sbc8548.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
sbc8641d.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
sc3.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
sc_sps_1.h mxs: Make ehci-mxs multiport capable 2013-03-07 17:22:57 +01:00
scb9328.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
seaboard.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
sequoia.h boards: remove the no longer used CONFIG_EHCI_DCACHE 2012-11-20 00:16:05 +01:00
sh7752evb.h sh: add support for sh7752evb board 2012-12-20 13:20:17 +09:00
sh7757lcr.h sh: Set CONFIG_SH_ETHER_PHY_MODE and CONFIG_SH_ETHER_SH7734_MII to boards with sh_eth 2012-05-28 09:12:54 +09:00
sh7763rdp.h sh: Set CONFIG_SH_ETHER_PHY_MODE and CONFIG_SH_ETHER_SH7734_MII to boards with sh_eth 2012-05-28 09:12:54 +09:00
sh7785lcr.h CMD: Drop CONFIG_CMD_DFL, it's not used 2012-04-19 22:01:13 +02:00
sheevaplug.h kirkwood: added common config file mv-common.h 2010-10-13 09:36:10 +02:00
shmin.h Merge branch 'master' of git://git.denx.de/u-boot-sh 2011-02-04 20:38:27 +01:00
smdk2410.h dm: Move s3c24xx USB driver to a proper place 2012-10-18 06:54:18 +02:00
smdk5250.h SMDK5250: config: Add configuration file for SMDK5250 board 2012-12-26 19:26:25 +09:00
smdkc100.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
smdkv310.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
snapper9260.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
snow.h EXYNOS5: Snow: Add a configuration file 2013-03-12 19:24:24 +09:00
snowball.h u8500: Separating mmc config parameters from driver 2012-09-01 14:58:20 +02:00
socfpga_cyclone5.h arm: move C runtime setup code in crt0.S 2013-01-08 22:14:50 +01:00
socrates.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
sorcery.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
spc1920.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
spear-common.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
spear3xx_evb.h cleanup/SPEAr: Define configuration flags more elegantly 2012-07-07 14:07:42 +02:00
spear6xx_evb.h cleanup/SPEAr: Define configuration flags more elegantly 2012-07-07 14:07:42 +02:00
spieval.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
stamp9g20.h Fixes the crippled console output on PortuxG20. 2012-09-04 22:06:19 +02:00
stxgp3.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
stxssa.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
stxxtc.h hush.c: Move default CONFIG_SYS_PROMPT_HUSH_PS2 to hush.c 2012-06-20 20:36:51 +02:00
suvd3.h powerpc/83xx/km: add MV88E6122 switch support for kmvect1 2013-02-15 17:47:20 -06:00
svm_sc8xx.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
t3corp.h ppc4xx: t3corp: Add support for the Xilinx DS617 flash chip 2010-12-17 09:43:23 +01:00
t4qds.h powerpc/t4240qds: Update IFC timing for NOR flash 2013-01-30 11:25:09 -06:00
taihu.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
taishan.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
tam3517-common.h Remove unused CONFIG_SYS_I2C_BUS[_SELECT] 2013-01-29 06:40:01 +01:00
tb0229.h CONFIG_SYS_BAUDRATE_TABLE: Add <config_fallbacks.h>, place there 2012-06-20 20:26:16 +02:00
tcm-bf518.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
tcm-bf537.h board configs: drop NET_MULTI references 2011-10-05 22:22:16 +02:00
tec.h Tegra: TEC: Enable boot script support 2013-04-15 11:01:37 -07:00
tegra-common-post.h tegra114: add SPI driver 2013-03-25 09:56:07 -07:00
tegra-common.h Tegra: enable verify support for the crc32 command 2013-04-15 11:01:37 -07:00
tegra20-common.h ARM: tegra: enable workaround for ARM erratum 716044 2013-03-22 16:45:25 +01:00
tegra30-common.h ARM: tegra: make bounce buffer option common 2013-03-14 11:06:44 -07:00
tegra114-common.h Tegra114: I2C: Enable I2C driver on Dalmore E1611 eval board 2013-03-14 11:06:42 -07:00
ti814x_evm.h ti814x_evm: add ti814x evm board support 2013-03-24 12:49:12 -04:00
tk71.h Kirkwood: Add support for Ka-Ro TK71 2012-07-07 14:07:33 +02:00
tnetv107x_evm.h dm: wdt: arm: Move tnetv107x into drivers/watchdog/ 2012-10-18 06:52:02 +02:00
tny_a9260.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
top9000.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
trats.h spl:falcon:trats: Fix SPL image size computing. 2013-03-29 11:42:35 +09:00
tricorder.h tricorder: enable hw assisted BCH8 in SPL and u-boot 2013-04-08 11:29:05 -04:00
trimslice.h tegra: spi: rename tegra SPI drivers 2013-03-25 09:56:05 -07:00
trizepsiv.h mmc: pxa: Flip over the remaining boards to pxa_mmc_generic 2012-10-22 02:56:25 -05:00
tt01.h power:pmic: Rename CONFIG_PMIC* defines to CONFIG_POWER 2012-11-14 11:21:12 +01:00
tuxx1.h powerpc/83xx/km: add support for kmopti2 board 2013-02-15 17:47:21 -06:00
twister.h OMAP3: drop CONFIG_SPL_OS_BOOT_KEY and use local define 2013-03-01 12:01:32 -05:00
tx25.h tx25: add CONFIG_SPL_LIBGENERIC_SUPPORT 2013-05-01 16:24:03 -04:00
u8500_href.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
uc100.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
uc101.h Move LDSCRIPT definitions to board config files. 2010-12-09 10:27:41 +01:00
utx8245.h powerpc: remove not used CONFIG_SYS_TFTP_LOADADDR 2012-12-15 12:28:22 -06:00
v5fx30teval.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
v37.h lcd, mpc8xx: move the mpc8xx driver to drivers/video 2013-03-21 09:17:39 +01:00
v38b.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
vct.h boards: remove the no longer used CONFIG_EHCI_DCACHE 2012-11-20 00:16:05 +01:00
ve8313.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
ventana.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
versatile.h versatile: board configs: Use buffered writes on flash 2012-10-18 15:59:55 +02:00
virtlab2.h split mpc8xx hooks from cmd_ide.c 2012-10-17 07:59:08 -07:00
vision2.h Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged 2012-12-19 13:02:36 -08:00
vl_ma2sc.h ARM: Remove unused stack and irq config defines 2012-09-01 14:58:22 +02:00
vme8349.h powerpc/mpc83xx: increment malloc heap size 2012-07-03 11:07:21 -05:00
vpac270.h serial: pxa: Make use of default_serial_console in serial_pxa 2012-10-15 11:53:48 -07:00
walnut.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
wandboard.h wandboard: Remove CONFIG_SYS_FSL_USDHC_NUM 2013-04-03 11:40:44 +02:00
whistler.h ARM: tegra: enable a common set of disk-related commands everywhere 2013-03-14 11:06:45 -07:00
wireless_space.h ARM: lacie_kw: add support for WIRELESS_SPACE 2013-01-09 04:12:10 +05:30
woodburn.h MX35: add support for woodburn board 2012-10-26 16:27:59 +02:00
woodburn_common.h Merge branch 'master' of git://git.denx.de/u-boot into master 2012-12-08 12:02:45 +01:00
woodburn_sd.h MX35: add support for woodburn board 2012-10-26 16:27:59 +02:00
x600.h ubifs: Allow ubifsmount volume reference by number 2013-03-04 14:19:56 -05:00
xaeniax.h serial: pxa: Make use of default_serial_console in serial_pxa 2012-10-15 11:53:48 -07:00
xilinx-ppc.h ml507: Fix Xilinx uartlite driver hang 2012-10-08 11:12:07 -07:00
xilinx-ppc405-generic.h ppc4xx: Generic architecture for xilinx ppc405(v3) 2008-10-24 17:26:09 +02:00
xilinx-ppc405.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xilinx-ppc440-generic.h rename CFG_ macros to CONFIG_SYS 2008-10-18 21:54:03 +02:00
xilinx-ppc440.h ppc4xx: Merge xilinx-ppc440 and xilinx-ppc405 cfg 2008-10-31 10:31:02 +01:00
xpedite517x.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
xpedite520x.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
xpedite537x.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
xpedite550x.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
xpedite1000.h COMMON: Use __stringify() instead of MK_STR() 2012-10-15 11:53:47 -07:00
yosemite.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
yucca.h Replace CONFIG_SYS_GBL_DATA_SIZE by auto-generated value 2010-10-26 21:05:30 +02:00
zeus.h serial: Remove CONFIG_SERIAL_MULTI from config files 2012-10-15 11:53:58 -07:00
zipitz2.h lcd, pxafb: move the pxafb to drivers/video 2013-03-21 09:38:21 +01:00
zmx25.h ehci-mxc: Make i.MX25 EHCI configurable 2012-11-16 09:16:45 +01:00
zynq.h xilinx: zynq: Enable DCC and create new zynq_dcc board 2013-02-07 09:18:41 +01:00