This driver is based on Linux 2.6.39 8139too driver.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is no need to check the card-detect status
for non-removable devices.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not have usb_get_dev_index() function, so remove this declaration.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Even when both the ethernet controller and the phy support certain
features a board may have additional limitations. Allow specifying
it in the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The of_* commands take devicetree nodes as parameters. Add a
devicetree completion function to ease passing nodes to these
commands.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards have to initialize the PMIC before other devices can
be initialized. This requires three levels of initcalls: one level
in which the PMIC is probed, one in which the board can call mc13xxx_get()
and the third one to initialize the PMIC dependent devices.
Allow to register a callback which is called once the PMIC is initialized.
This way mc13xxx_get() is no longer necessary and the number of required
initcalls levels is reduced to two.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gcc 4.8.3 throws the following error
include/mfd/syscon.h: In function 'syscon_base_lookup_by_pdevname':
include/mfd/syscon.h:22:1: error: parameter name omitted
static inline void __iomem *syscon_base_lookup_by_pdevname(const char *)
Fix it by adding the name to the function prototype.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add stripped sown version of the reset controller
framework from the Linux kernel.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In barebox network packets always go out at the current ethernet
device and are expected to be received from the current interface.
This has some side effects. When for example an NFS is mounted when
one interface is active and the interface is changed afterwards the
NFS packets leave the new interface, but the NFS server won't be
reachable there.
Instead of changing the whole network traffic to the current ethernet
interface we now initialize a network connection with the current
network interface, but then the connection will continue to use that
interface even when the current interface is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We use 'u32' type in stdlib.h so we have to include types.h.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Clock gates having the CLK_GATE_HIWORD_MASK flag set use the upper 16
bits of the register as a "write enable" mask for the value in the
lower 16 bits.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a clk_gate_flags argument to clock gate creation functions
to allow the introduction of new clock gate modifiers.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Provide minimal regulator support. Only supported operations are enabling
and disabling regulators. Association of devices with their regulators is
limited to devicetree only. If regulator support is disabled the API expands
to static inline stubs so consumers can still use the API.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox used to have its own include/dt-bindings with files copied
from the corresponding kernel files. Use upstream dt-bindings directly
instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a mtd device can have bad blocks we want to create a
bb device, so do this automatically. This allows us to
drop bb device creation from the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Wadim Egorov
Antony Pavlov
Sascha Hauer
Herve Codina
Lucas Stach
Steffen Trumtrar
Holger Schurig
Franck Jullien
Christoph Fritz
Beniamino Galvani