Use linux.bootargs.console to specify the console since this
is the variable the console code uses for automatically assigning
a console.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, MIPS is the only architecture that needs
include/generated/asm-offsets.h, but we have got ./Kbuild file now.
It is a good reason to move asm-offsets.h rule from arch/mips/Makefile
to ./Kbuild and add dummy asm-offsets.c for the other architectures.
asm-offsets.h would be useful for all the architectures.
This commit does not implement include/generated/bounds.h,
but if necessary, it is easy to implement it.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change Product Data validity checking to ensure that support can
be provided for 8-bit and 16-bit EEPROM devices.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a limited board support for the Freescale P1010RDB.
The board boots from NOR and output the prompt to the serial port
at 115200 bauds. All 3 Ethernet ports are supported by the gianfar
driver. I2C devices are accessible on both bus and the memory is
initialised by the 85xx DDR driver.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the Freescale P1010 including errata for this CPU,
SoC frequency calculation and GPIO settings.
The mpc85xx configuration options file is re-ordered to facilitate
board option selection.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a minimal Integrated Flash Controller header file and new
definitions to support the P1010 SOC.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Move the configuration, control and status register base address
(CCSRBAR) relocation to the start-up processing. This addresses
TLB faults found during testing on the Freescale P1010RDB and
also matches the current U-Boot functionality.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Compiling the tree with allyesconfig is helpful because different
compilers (gcc, clang) or static checkers (e.g. clang's scan-build)
can then process and check more code.
This patch introduces two new configuration symbols that Kconfig files
can depend on. That way, code that is only working where a cache or DMA
implementation exists can be opted out.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ppc implementation is identical to the generic implementation, so
use the generic one instead.
Also add the missing __ffs function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix only two "interupt" misspellings in entire barebox codebase.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/ppc/boards/freescale-p1022ds/ddr.c: In function 'fsl_ddr_board_info':
arch/ppc/boards/freescale-p1022ds/ddr.c:39:21: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Network commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Shell scripting commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The current implementation fakes a memory-mapped I/O device
at 0x3f8 and 0x2f8, then uses platform read/write functions
to do the actual reading and writing. These platform functions
only exist for the x86 platform; better to move the I/O
routines into the driver and have the driver request I/O ports
using request_ioport_region.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add an environment partition and support commands so that the system
configuration can be permanent.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kconfig and make files are updated to build the Freescale P1022DS
image.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The eTSEC 2.0 devices found on the 85xx family of SoCs support stashing
buffer descriptors in the L2 cache. This updates the device tree fixup
for these devices to ensure that the stashing related properties used
by Linux are initialised correctly.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the Freescale P1022DS. Driver support is limited to:
- I2C
- Ethernet
- Serial
- NOR flash
- PIXIS FPGA
System clock configuration is read from the FPGA but has only been
tested using a 133MHz system clock and 100MHz DDR clock.
Boot arguments are defined in the environment to boot over NFS with
a console configured at 115200 bauds.
Enabling branch prediction is moved from board support to the platform
support for all boards as it is a CPU feature.
Some the code is from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add DDR3 support into the MPC8xxx DDR driver.
To avoid confusion, the function set_ddr_sdram_mode is renamed
set_ddr2_sdram_mode.
Checking for errors is simplified in the DDR2 DIMM parameters
computation to be consistent with DDR3.
This code is derived from the files found in directory drivers/ddr/fsl
from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add DDR3 SPD verification support for use by the PPC 8xxx DDR driver.
This is based on the equivalent files from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CPU, DDR, and LBC definitions are added to support the Freescale P1022.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Enable memtest, MMU and iomem support on the P2020RDB and DA923RC.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support to enable caching on a memory region during the memory test.
Tested on P2020RDB and DA923RC.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Memory regions on MPC85xx boards are incorrectly defined leading to
corruption when running memory tests. This patch updates the memory
layout of MPC85xx boards so that critical memory regions can be
correctly reserved during the memory test.
Tested on the P2020RDB and DA923RC.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix the chip select configuration register offset increment and summing
of bank size so that, for chip select index greater than 0, barebox can
determine the total memory size from enabled banks.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Increase the malloc size so that larger debug Linux image can be loaded.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A boot script is added to load DTB and Linux images for booting.
The init script starts the boot script after a 5s timeout window.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The UBI/UBIFS support is enabled and a script is added to attach
the UBI device and mount the UBIFS partition. This allows the loading
of firmware images from the NOR flash.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Removed the ppc bit operation functions and definitions in the ppc
file asm/bitops.h since these are already defined in the asm-generic header
files. Moved ffs64 definition to the mpc85xx header files because
the function requires the inclusion of linux/log2.h which also includes
asm/bitops.h.
The conflict was noted when UBIFS was enabled in barebox.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Expression (pdimm->data_width >= 32) || (pdimm->data_width <= 40)
always evaluates to true, so probably we need to use "&&" here.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Import U-Boot start-up code from version git-9407c3fc to include the
latest CPUs errata and make future U-Boot code inclusion easier. The
code import is limited to the currently supported CPUs P2020/MPC8544.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The linker script and start up code are updated so that the bss
section is located above the barebox binary in memory. This removes
the reliance on a hard-coded value.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Juergen Borleis
Masahiro Yamada
Alexander Shiyan
Renaud Barbier
Holger Schurig
Robert P. J. Day
Antony Pavlov
Michel Stam