When bootloader spec is used to boot devices it is often desirable
to boot the same image from different media. Since the fs images
need to contain the root= parameters to tell Linux where to boot
from the images can't be identical on different media.
This patch changes this by introducing a 'appendroot' option for
bootloader spec. If set to true, barebox will construct a Linux
commandline option for the device the bootloader spec entry is found
on.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit b8a1bb1dd2 (pci: defer device registration until after bridge setup)
changed the activation order of devices, so that bridges above the devices could
be configured properly before activating the devices below. This commit failed
to acknowledge that there may be devices located directly on the root bus without
any bridge in between and so those devices would never get enabled.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Sync the pci register definitions with Linux 4.0-rc1. Some are needed
for the upcoming designware pcie driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Kernel, put into the same place as in the kernel,
although the hexdump.c does not actually contain hexdum functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is required for Rockchip SoCs where clock settings registers have
write-enable mask in high word.
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is required for Rockchip SoCs where clock settings registers have
write-enable mask in high word.
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The include/common.h is still cluttered (although much better than
U-Boot). It contains various utility macros that originates
in Linux. Move them to the original place, include/linux/kernel.h,
to slim down include/common.h.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In Linux, these macros are defined in include/asm-generic/bug.h.
To tidy up common.h, move BUG(), BUG_ON(), WARN(), WARN_ON() there.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In Linux, the macros BUILD_BUG_ON* are defined in include/linux/bug.h.
To tidy up common.h, move BUILD_BUG_* there.
MAYBE_BUILD_BUG_ON is not used in barebox and it was removed from Linux
long time ago. Drop it from barebox, too.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The parameters ECC Strength, BadBlockMarkerByte and BadBlockMarkerStartBit in
the FCB structure depends on the nand chip's pagesize and oobsize. Instead of
hardcoding these values into the imx6 bbu handler calculate these values on the
fly. Therefore we export the necessary functions from the nand_mxs driver to
use them in the bbu handler.
Signed-off-by: Stefan Christ <s.christ@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux uses SHRT_* instead of SHORT_*. The <limits.h> of C does
the same. Let's follow this standard.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux defines *_MAX, *_MIN macros in include/linux/kernel.h.
Let's follow this way to slim down the common.h.
This change should have no impact because include/common.h already
includes <linux/kernel.h>.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Looks like I am also highly addicted to Linux...
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds support for Marvell's 88E1543 PHY chip. This chip is
almost identical to the 88EE1545, except the 88E1545 supports QSGMII
and the 88EE1543 supports SGMII.
Therefore, the same configuration function is used for both PHYs. For now,
the only initialization provided for the 88EE1543 is the LED setup.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds support for Marvell's 88E1545 PHY chip. In particular, this
allows to support QSGMII interfaces.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds xz decompression support from the kernel. Both compressing
the barebox binary with xz and decompressing xz files on the commandline
is supported.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This brings in the generix PHY framework from Linux.
I tried to strip it down as much as possible while
keeping it useful.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So that PCI devices hang down from bridges and root
bridges down from the PCI host controller when
calling devinfo.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some host controllers provide a prefetchable
memory area and devices will prefer this for
some of their BARs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This changes the MUSB support from the original Kernel state to
be usable with barebox. Tested on a custom board and the Beaglebone
Black. The host port on the Beaglebone works, the OTG port works
in device mode, but not yet in host mode.
Based on the initial MUSB port from Rolf Evers Fischer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Multi-SoC support for MVEBU will add mbus ranges for all compiled
SoCs. To protect the mbus node of the SoC barebox is executed on
from others ranges, pass machine's compatible to mvebu_mbus_add_range
and check before applying the fixup.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
phy_wait_aneg_done() is directly called by the network code, so it
should not read phy registers directly. Introduce phy_aneg_done to
give phy drivers the chance to do something different to poll for
autonegotiation completion.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So they can be used in board files to register
fixups.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Lucas Stach
Andrey Panov
Masahiro Yamada
Stefan Christ
Lucas Stach
Ezequiel Garcia
Sebastian Hesselbarth
Antony Pavlov