Beagle board from TI is a development platform
based on TI's OMAP3530 silicon.
You can find more about Beagle Board here: www.beagleboard.org
More on OMAP3530 (including documentation can be found here):
http://focus.ti.com/docs/prod/folders/print/omap3530.html
Signed-off-by: Raghavendra KH <r-khandenahally@ti.com>
[Patch 15/17] U-Boot-V2:ARM:OMAP3: Add support for SDP3430 support files
This patch introduces support for OMAP Boards common infrastructure.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 12/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP3 Silicon files
This patch introduces support for OMAP3430 clocking infrastructure. Please note that SRAM based configuration requires GPMC values to be updated before returning to caller- TBD.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 11/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP3 Silicon files
This patch introduces support for OMAP3430 - provides for generic OMAP3 files.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 10/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP and Cortex A8
This patch adds support for OMAP3 platforms. Mainly to setup the infrastructure.
ARMV7 requires a different I/D cache cleanup code which is introduced in this patch
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 04/17] U-Boot-V2:ARM: Remove unwanted flags from Makefile
CFLAGS: "-D __ARM__" should have been "-D__ARM__". this breaks sparse check.
Further -nostdinc in Makefile is redfined by
commit ID:847934bc960ba1588c87e283118318dfdd78d4c0
This is unecessary as NOSTDINC_FLAGS defines it
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
[Patch 03/17] U-Boot-V2:ARM: Fix lds file for multiple section enable.
By enabling -fdata-sections -ffunction-sections in arch/arm/Makefile, gcc splits the code into multiple section.
by using * wildcard we can bunch them into the areas we want them to be.
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
Memory layout can now be specified via kconfig options. Two
possibilities exist: default layout means the layout is stack
/ malloc heap / U-Boot. The user can also specify fixed addresses
for each TEXT_BASE / stack / malloc heap.
as we rather use positive logic. Make it dependent on boards that
have it rather than on ARM
Signed-off-by: Nishanth Menon <x0nishan@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
values into kconfig which are not user configurable at all only
encourages people to put even more stuff in there. This is not
good because people tend to have board patches lying around and
these patches won't apply regularly if they all change the same
file (arch/arm/Kconfig)
Instead, introduce a function armlinux_set_architecture() which
everyone can call during board setup.
Similarly introduce armlinux_set_bootparams() for the boot
parameter pointer.
This patch removes the "-isystem $(gccincdir)" from the
arch/*/Makefile because gccindir is empty.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Make the frequency output a little bit nicer
From: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
This patch cleans up the do_bootm_linux() function. It removes most of
the uggly ifdefery and replaces it by a sane function optimizing
structure.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Raghavendra KH
Nishanth Menon
Sascha Hauer
Robert Schwebel
Marc Kleine-Budde