Instead of using a redundant definition. This makes things a bit cleaner
and also avoids to introduce another private define in the next patch.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are systems like the Calxeda Highbank, which need to do SMC
calls in order to access the secure L2C registers, which means they
want to replace the outer cache disable function with their own.
As the cache flush before entering the boot target is still needed
and to avoid exposing L2C internals to the architectures move the
flush before disable into the only current user.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell NETA Network Engine found in Armada 370 and XP SoCs
also has a different compatible for Armada XP. Add the compatible
to the of_device_id list.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Newer Marvell MVEBU SoC like Armada 370/XP have an additional core
clock divider for e.g. NAND clock. Add the corresponding driver based
on the Linux driver.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Putting a SD card into highspeed mode doesn't help much when we
still clock the card with 25MHz. Increase the clock speed to 50MHz
for high speed cards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In drivers/usb/core/usb.c we already have le16_to_cpus() conversion
just after usb_get_descriptor():
390 /* correct le values */
391 le16_to_cpus(&dev->descriptor->bcdUSB);
392 le16_to_cpus(&dev->descriptor->idVendor);
393 le16_to_cpus(&dev->descriptor->idProduct);
394 le16_to_cpus(&dev->descriptor->bcdDevice);
so no additional idVendor/idProduct descriptor fields
le16_to_cpu() conversion is needed after that.
On the big-endian machines extra le16_to_cpu() conversion
leads to wrong idVendor/idProduct USB device parameters values
(e.g. see devinfo <usb-device> output), and to a much more
serious problem: idVendor/idProduct-based USB device detection
does not work.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A first stage bootloader can read fat and ext4 filesystems, and
even both can be compiled-in at the same time.
But then xload has a hardcoded fat filesystem mount option which
renders ext4 unusable.
This patch tries to mount it as ext4 if the fat attempt fails.
Then, a typical use case of an ext4 formatted filesystem
is it to be a standard linux filesystem, which contains
boot-related files in /boot. So, when searching for the second stage
bootloader, try /boot/barebox.bin after not finding it in /barebox.bin
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
detect_fs would usually mount a device on a directory,
so, use a device-specific type detection.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ROM base address in the 9x5 processors lives at 1M, not 4M,
where SMD is, as defined later in the same file.
The ROM includes some tables that are used to build error-correction data
for NAND memory. By using the wrong address, we get wrong data and
the result is undetected bit flips (data at 0x408000 is all zeroes).
Thus, even though our kernel was fixing bit errors in NAND, barebox
was not fixing them. With UBI (our situation) we got I/O errors because
the checksum verification for data nodes failed.
Using the proper address corrects the problem: barebox reports a
"bitflip" message, consistent with the kernel message for the same
file, and the files are properly loaded and booted.
Note: the kernel has the same wrong define, but then the magic number
0x00108000 as spelled in arch/arm/boot/dts/at91sam9x5.dtsi is used
instead of the symbolic name.
Signed-off-by: Edoardo Scaglia <scaglia@amelchem.com>
Signed-off-by: Federico Braghiroli <braghiroli@amelchem.com>
Signed-off-by: Alessandro Rubini <rubini@gnudd.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The backlight enable gpio is in both the ldb node and the panel node.
Remove it from the ldb node where is was unused and fix the polarity
in the panel node. Also make the panel compatible to simple-panel to
let the driver match it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to support video modes directly in the ldb device node, that
was lost in: 5bda17e video: ipuv3: Replace ipu_output with VPL.
Add this support back. Also drop duplicate vpl ioctl forwarding for
several calls.
With this patch modes can either be retrieved from the ldb node as
originally done or from the panel remote port.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When something is missing in the device tree or not all necessary
drivers are compiled in it may happen that no valid mode is found.
Do not crash in this case but print an error message.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As regmap is not used in Barebox we can remove this field
from the imx_hdmi struct.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a enum32 state variable node does not have a "names" property bail
out instead of continuing with an error value used as number of strings.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit 179b75a (state: fixup: only export default value during
fixup if set) accidently removed writing the enum32 value names
to the device tree. Add it back again
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
this can be useful on the evaluation board but we don't want
the sequence to launch on custom board when there is not the
switch button on gpio 82
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OTG and HOST port are tested with a mass storage device.
Signed-off-by: Florian Vallee <fvallee@eukrea.fr>
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
it's currently only handled through DT and for i.MX25 OTG port (at least),
we need to configure portsc to get host mode working but it actually fails
as ci->phymode is 0 which is USBPHY_INTERFACE_MODE_UNKNOWN
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
