This is based on the following U-Boot commit:
commit 5f4b4f2fed3ab8590c8c06b78642f8c1467acacf
Author: Vincent Palatin <vpalatin@chromium.org>
Date: Mon Dec 5 14:52:22 2011 -0800
ehci: speed up initialization
According to EHCI specification v1.0, the controller should stabilize
the power on a port at most 20 ms after the port power bit transition.
So, we put this setting in the virtual descriptor corresponding field,
(bPwrOn2PwrGood = 10 => 10 x 2ms = 20ms), this saves about 500ms at each
controller initialization/enumeration.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
for chache handling the ehci driver iterates over the hardware lists
of QHs/TDs. As we have a fixed number of maximum entries in this lists
we can allocate them as arrays and and clean/invalidate the arrays
instead which is much simpler. While at it, move the allocation to
ehci_probe so that we do not lose memory each time ehci_init is called.
Also, use memalign to allocate the QHs/TDs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also renamed config option name to MFD_MC13XXX.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
call dhcp when ip mode is dhcp-barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
by default we boot the same way as before
The menu add interactive interface to choice boot, reset or update the system.
We still can access the shell.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow a board to have a custom boot choice with a boot menu as
example.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The pcm027 is a PXA270 based Phytec phyCORE board.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Boot zImage and update nand partition layout to store the oftree.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Gregory HERMANT <gregory.hermant@calao-systems.com>
Boot via nfs instead of tftp and zImage.
Update nand partition layout to store the oftree.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Gregory HERMANT <gregory.hermant@calao-systems.com>
You can now use AINSI color in the display of the menu or menu_entry.
As the length of the string is not any more the same as the display simplify
the invertion display managemnent.
We just now invert the fontground and backgound on the string itself as done
in Kconfig.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From bd6c5c884337ae2d4ef41d85d59c2d5ec525f8a5 Mon Sep 17 00:00:00 2001
From: Uwe Hermann <uwe@hermann-uwe.de>
Date: Fri, 6 Apr 2012 17:30:01 +0200
The loady command seems to work just fine (tested on an S3C2440 target).
Also, mark it as TRISTATE like loadb and loads.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DHCP option 224 to 254 are for private use, so use one.
Export it via env dhcp_oftree_file.
E.g. the ISC dhcp server can be configured with
| option oftree-path code 224 = string
| class "at91sam9x5ek" {
| match if substring (option vendor-class-identifier,0,20) = "barebox-at91sam9x5ek";
|
| filename "/tftpboot/atmel/at91sam9x5/sam9x5ek/zImage";
| option tftp-server-name "192.168.200.98";
| option root-path "192.168.200.98:/opt/work/buildroot/build/sam9x5/target";
| option oftree-path "/tftpboot/atmel/at91sam9x5/sam9x5ek/sam9g25ek/dtb";
| }
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
you can now specify in the same way as it's done for the kernel where is
stored the oftree.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Read-only support for now to get MAC addresses.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this patch fix the following warnings :
arch/arm/mach-at91/at91sam9g45_devices.c:305:3: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
arch/arm/mach-at91/at91sam9g45_devices.c:309:3: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Alexander Shiyan
Marc Kleine-Budde
Uwe Hermann
Wolfram Sang
Eric Bénard