The I/O accessors in_bexx, out_bexx, in_lexx and out_lexx are updated
to the latest Linux version.
The patch is tested on a MPC8544 based board and solved I/O access
issues on I2C devices.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To prepare for an update of the I/O functions to the latest Linux
version, the indentation is fixed.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without this patch after compiling barebox
for a PowerPC board we have 'git status'
output looking like this:
# Untracked files:
# (use "git add <file>..." to include in what will be committed)
#
# arch/ppc/boards/pcm030/barebox.lds
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes it possible to modify the tree in the handlers.
This is necessary because the initrd addresses are only
known inside the handlers, but not to the generic bootm
code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CFI Flash is currently handled outside the mtd layer which makes it
a special case. Integrate it into mtd so that we get rid of this
special status.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add barebox-data section in arm branch to get complete
barebox regions in sdram regions tree.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change function remap_range in arm architecture to make it
global accessable. For example command 'memtest' can change
pte flags to enable or disable cache.
Add dummy function for others architectures that doesn't
have mmu or pte support.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox not contain symbol HAS_CFI, so remove all references to it.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The end boundary of each registers set may overlap with the start
of the next register set. Subtract 1 to the end boundary.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for both i2c busses on the p2020rdb board is added and the
configuration file is updated to add the I2C driver and commands.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A function to calculate the frequency divider and digital filter sampling rate
for the 85xx processors is added to the i2c-imx driver. Hence, this driver is
usable on IMX and 85xx machines.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file is copied from Linux 2.6.39. It is added so that the P2020RDB
can still build.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to use the IMX i2c driver on the mpc85xx SOC, the file mach/clocks.h
is renamed mach/clock.h. Files using this header are updated accordingly.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i2c-imx driver is able to support the I2C bus on the 85xx machines
with minor modifications. It already defines register offsets. Therefore,
this header file is no longer needed.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A function that returns the system bus frequency used to compute the i2c bus
frequency is added for future use.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Minimal support of the Ethernet interface on the P2020RDB board. Only
the eTSEC3 interface is supported.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl_eth_init function maps the TSEC registers (MAC, TBI and
external PHY access registers). It also passes the PHY address and
TBI registers initialization values.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This update adds the GIANFAR driver along with the configuration
and build files.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In view of the introduction of the GIANFAR Ethernet driver,
the mdio and gianfar base address are defined.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:
#define dma_alloc dma_alloc
#define dma_free dma_free
On all other archs the generic versions, which translate into xmalloc
and free are used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is limited board support for the Freescale P2020RDB in single CPU
mode. The DDR is configured for a memory bus running at 667Mhz.
The system boots from NOR flash and provides the console at 115200
bauds, no other drivers are included.
Finally, the PPC Kconfig and make file make the building of
the P2020RDB platform firmware possible.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Kconfig and Makefile allow to include the 85xx cpu support in the
compilation process.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
_text_base assignment has been removed earlier from lib/board.c
for the mpc5xxx.
For the 85xx, _text_base is set to where the firmware relocates
in memory as passed by the function input variable.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds initialization functions used by the e500v2 start-up code
and board specific code (L2 cache initialization).
Other functions help identify the CPU or return the programmed memory size.
Finally, the Makefile and Kconfig file are added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch contains functions that returns information on
the CPU and buses frequency (LBC, DDR, system).
It also includes the clock source driver.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch includes functions to initialize LAW registers and
the chip select 0 of the CPU.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch defines functions to set interrupt vector registers and
functions to handle hardware exceptions.
It also defines support functions to set and search TLBs.
Finally, the Makefile is added.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is the first part of the start-up code. The source code origin is
U-boot and is slightly modified to have e500v2 CPU support in 32-bit
mode only.
It includes the power-up entry point, CPU initialization code and
exports definition for D-cache flush and I-cache invalidate.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These header files are added to provide a minimal support to the
Freescale 85xx cpu to boot on a P2020RDB platform.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The trap relocation function trap_reloc can be used across several PPC
platforms and is added to the ppc library. Accordingly, the definition
of trap_reloc is removed from mach-mpc5xxx/start.S
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Renaud Barbier
Antony Pavlov
Alexander Aring
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Marc Kleine-Budde