9
0
Fork 0
Commit Graph

18 Commits

Author SHA1 Message Date
Uladzimir Bely 825fca396f imx6: ocotp: Add On-Chip OTP registers write support
FUSEs (OTP registers) can be written via /dev/imx-ocotp character device.

For example, writing MAC 12:34:56:78:9A:BC can be performed as
    > mw -l -d /dev/imx-ocotp 0x8c 0x00001234
    > mw -l -d /dev/imx-ocotp 0x88 0x56789ABC
and reading as
    > md -l -s /dev/imx-ocotp 0x88+8
    00000088: 56789ABC 00001234
, where 0x88 (0x22*4) and 0x8C (0x23*4) are offsets of MAC OTP registers.

Notice: FUSEs are PROM, so "0" (unprogrammed) bits
can be replaced with "1" (but not vice versa) only once.

Also, for MAC there are convinient parameters:
    > ocotp0.permanent_write_enable=1
    > ocotp0.mac_addr=12:34:56:78:9A:BC
    imx_ocotp 21bc000.ocotp: reloading shadow registers...
    imx_ocotp 21bc000.ocotp: reloading shadow registers...
    > echo $ocotp0.mac_addr
    12:34:56:78:9A:BC

Signed-off-by: Uladzimir Bely <u.bely@sam-solutions.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-05-05 09:35:05 +02:00
Sascha Hauer ce6755ca1c ARM: i.MX6: Add video clocks
This adds the IPU, LVDS and HDMI clocks. As these are many, depend
on the IPU driver being compiled in.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-03-28 21:03:15 +01:00
Sascha Hauer 6d610de61c ARM: i.MX: introduce clk parent rate changes
Let dividers and gates change the parent rates.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-03-28 21:03:15 +01:00
Sascha Hauer 3e9a71f78d clk: clk-divider: pass flags to initializers
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-03-28 21:03:14 +01:00
Sascha Hauer 23a8d93c52 Merge branch 'for-next/pwm' 2014-03-07 09:25:56 +01:00
Philipp Zabel 82e69edac7 ARM i.MX6: Gate clocks to graphics processing units
This patch gates the clocks to GPU, IPU, and VPU units by default,
significantly reducing the VDDSOC power draw while barebox is running.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-02-24 09:29:49 +01:00
Sascha Hauer 53bdcd4c54 ARM: i.MX6: Add PWM clk lookups
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2014-02-14 07:18:07 +01:00
Sascha Hauer b67b2671c2 treewide: Add missing includes
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-11-08 15:42:04 +01:00
Sascha Hauer 0f15dee78f mtd: nand: mxs-nand: Add i.MX6 support
The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-07-23 16:25:14 +02:00
Sascha Hauer 2260389da4 ARM: i.MX: Make timer available earlier
This moves the CCM drivers to core_initcall since this has no dependencies.
This way we can be sure that the clock for the clocksource is available in
at postcore_initcall time.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-06-18 09:02:44 +02:00
Sascha Hauer b62be26793 ARM: i.MX6: Fix CCM compatible node
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-05-31 08:33:41 +02:00
Sascha Hauer bb2e752fb6 ARM i.MX6: Add usbphy clocks
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-20 11:08:47 +01:00
Sascha Hauer 5a12d90361 ARM i.MX6: Add sata device
This also adds and enables the clocks needed for SATA.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-12-06 14:25:18 +01:00
Sascha Hauer 984eae1f2f ARM i.MX6 clk: remove gate_mask from pllv3
Not needed as we will handle the additional gate bits as gate.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-12-06 12:59:27 +01:00
Sascha Hauer c753cb36f9 ARM i.MX6: rename PLLs according to datasheet
In recent reference manuals the plls were renumbered. PLL8 now is
PLL6 and vice versa. Change the code according to the reference
manual to avoid confusion.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-12-06 12:54:00 +01:00
Sascha Hauer aa64d57898 ARM i.MX: Add devicetree support to the ccm drivers
This adds the compatible strings to the CCM drivers.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-10-05 12:34:19 +02:00
Sascha Hauer 94de405d8f Merge branch 'for-next/imx-clk' 2012-10-04 15:24:57 +02:00
Sascha Hauer 555a1ff0c3 ARM i.MX6: Switch to common clk
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2012-10-04 15:19:56 +02:00