detect it at boot time
if the user button is pressed 5s and the vbus is 1 start the dfu
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drop irq id and rebase instead of of offset
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For PIO NAND access functions, we use the features of the SMC:
- no need to take into account the NAND bus width: SMC will deal with this
- use of an IO memcpy on the NAND chip-select space is able to generate
proper SMC behavior.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
enable it only if a compression is enabled
support gzip, bzip2 and lzo
you will be able to choose which compression to use
-rw-r--r-- 1 root root 8436 Dec 15 01:35 barebox_default_env
-rw-r--r-- 1 root root 2782 Dec 15 01:35 barebox_default_env.bz2
-rw-r--r-- 1 root root 2691 Dec 15 01:38 barebox_default_env.gz
-rw-r--r-- 1 root root 3262 Dec 15 01:38 barebox_default_env.lzo
with using gzip and the default env we can save 5.6KiB (5,745 bytes)
with using bzip2 and the default env we can save 5.5KiB (5,654 bytes)
with using lzo and the default env we can save 5.1KiB (5,174 bytes)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
introduced in commit f76ad819e4
drivers/mtd: cosmetic changes
it's supposed to the invert of the writesize - 1
Cc: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this device controller is present on rm9200/9260/9g20/9261/9g10/9263
the 9g45 use an other IP
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
TLSF: Two Level Segregated Fit memory allocator implementation.
Written by Matthew Conte (matt@baisoku.org).
Public Domain, no restrictions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The flags in struct console_device have to be initialized
to zero. Otherwise the following can happen:
- console_register sets the initial baudrate of a new console
before we set the global console init state to CONSOLE_INIT_FULL.
- In console_baudrate_set we test whether the current console is
active which may be true because of unitialized flags.
- we then call getc() to wait for the user to accept the new settings
and we are stuck because of the CONSOLE_UNINITIALIZED state
we will never get anything from getc().
Looking back this explains some cases for me when barebox refused
to start and I really wonder why this did not become a more visible
problem before.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a device to read and write to MTD data and oob
(/dev/mtdraw<N>).
The device is constrained in a separate source file, so that
further improvement of commands (such as nandwrite) could
make it useless, and easy to remove.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Split /dev/mtd and /dev/mtdoob devices.
Remove from mtd structure the mtdoob character device.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If multiple MTD devices were registered, an exception
occured, as they all wanted id 0. Let the driver code choose
the device number dynamically.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change NAND_WRITE into MTD_WRITE.
Change "page_shift" references in the core, which are purely
NAND, into mtd->writesize which is MTD generic.
Rename all "info" (struct mtd_info) into "mtd".
Also provide a parameter to add_mtd_device() so that legacy
nand devices still appear as nand<N>.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix whitespace, replace all debug() by dev_dbg(), and fix
line length to 80 characters.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It makes no sense to check the filename pointer here, because a) we have
already been using it and b) argc has been tested against 1 already, so
argv[1] should not be NULL. So, drop the checks.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support the setup of the mmc voltage, when booting OMAP4 with twl6030
from nand.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a general twl device driver twlcore to call i2c send/write
functions.
Abstract twl4030 to call twlcore functions.
Fixed some code-styling issues pointed out by checkpatch.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added i2c support for omap4. Tested on pcm049.
Driver based on linux kernel implementation.
Also added a shift to access 16-bit registers
to make support for OMAP730/850 possible.
If accessing a non existing slave the bus will go into arbitration mode.
It's unable to recover from it.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add sorted insert in stringlist functions.
Also added function to checked if string is already
in string list.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a function to remap an IO range into a virtual addresses
range. This is particulary usefull for the few devices
mapped at physical address 0, as the MTD boot devices.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Increase pxa reading performance by reading 4 bytes at a
time instead of 4 reads of 1 byte.
As the mci controller FIFO accepts reads on bytes, halfwords
or words, use words whenether possible.
The boost is for a 250KBytes file read and display (bmp):
- before: 6900ms
- after: 6000ms
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The write data timeout is too small for old cards,
especially the Transcend 256MBytes SD card. Increase it from
10ms to 100ms.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As PXA cpus suffer from a silicon bug which prevents them
from being compound devices, forbid use_acm=1 for PXAs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The NAND_READ_OOB Kconfig option is used to
a) creating a cdev for reading OOB data
b) compiling in mtd->read_oob support
The former was intended and that's also what the Kconfig help
says. The latter though was implicit and wrong. mtd->read_oob
is also used by the bbt code which resulted in a NULL pointer
deref when compiled with BBT but without NAND_READ_OOB.
To fix this, split the option into two. The now invisible
option NAND_OOB_DEVICE is only responsible for b) and gets
selected when necessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>