This handler uses a regular SPI master and a few GPIOs to program an
Altera FPGA in serial mode.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add stripped sown version of the reset controller
framework from the Linux kernel.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Provide minimal regulator support. Only supported operations are enabling
and disabling regulators. Association of devices with their regulators is
limited to devicetree only. If regulator support is disabled the API expands
to static inline stubs so consumers can still use the API.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mostly taken from the kernel with support for other SoCs from
Alexander Shiyan.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alexander Shiyan <shc_work@mail.ru>
This is a massively stripped down pinctrl support. The upper API
consists of only of:
int pinctrl_select_state(struct device_d *dev, const char *state);
This is used to setup the pinmux for a device to a certain state.
This function normally does not need to be called manually. The
device core will setup the default state before probing a device.
The pinctrl core has the job of handling the devicetree. It parses
the pinctrl phandles for a device from devicetree, finds the correct
pinctrl device and calls its set_state callback with the pinctrl
setup device node.
The simplicity of this pinctrl framework comes from the fact that
we:
- Limit usage to devicetree only for now. For non devicetree use the
old legacy SoC specific APIs still can be used.
- Do not parse the devicetree into internal data structures which
are used by the drivers later. This adds the overhead that we
may parse the devicetree multiple times for more dynamic setups,
but on the other hand we do not need to parse devices from the
devicetree we don't use in barebox
- Do not detect resource conflicts. Since the framework mainly is
a devicetree parser this would be hard to implement. It should
be easy for board maintainers to avoid resource conflicts though.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
OFDEVICE decides whether or not we compile in support for probing
devices from the devicetree. Let the user decide this explicitly.
This makes the oftree, of_node and of_property commands independent
of devicetree device support since being able to manipulate
devicetrees has nothing to do with probing devices from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CFI Flash is currently handled outside the mtd layer which makes it
a special case. Integrate it into mtd so that we get rid of this
special status.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
export for each device via param
the familly id (fid)
the id
the full reg_num
so for simple 64bit memory rom(ds2401/ds2411/ds1990*) no need driver.
Based on linux implementation, cleaned and re-implement the master/slave
support to use the device/driver model correctly.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
on Cortex A9 and Cortex A5 we have a generic timer which we can use as
clocksource
Limit the timer frequency to < 25Mhz
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This adds code to probe devices from a devicetree. Most helper
functions are directly imported from Linux.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to detect the amba device and use the right driver for it at
runtime.
The code is base on linux 3.5.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Based on the U-Boot version. Changed to kernel style register layout, added
MX23 support, made MMU aware and adapted to barebox.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a simple wd command which can setup, trigger and stop a watchdog
on the platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds framework support for PWM (pulse width modulation)
devices.
A new pwm can be registered from a hardware driver using
pwmchip_add(). It can then be requested from a client driver using
pwm_request(). A string is used as a unique identifier for the
pwms. It should usually be initialized by the hardware drivers
using dev_name(dev). The client API is the same as currently
in the Linux Kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'ATA' means more an interface than a disk drive. Change the names to reflect
their real meaning.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds support for most spi eeproms, such as the
Atmel at25 models.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the basic framework to handle MCI cards in barebox.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as refer in this patch "arm & sh: factorised duplicated clkdev.c"
factorise some generic infrastructure to assist looking up struct clks
for the ARM & SH architecture.
as the code is identical at 99% in linux
move it also as preparing for the SH adding
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Add the basic files, declarations and folders to bring in ATA support.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imported from commit bd76729bcbfd64b5d016a9b936f058931fc06eaf.
Only minor changes to make it compile.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>