get_fs_device_by_path returns a struct device_d instead of what the
name suggests a struct fs_device_d. Also it returns the rootpath
of the corresponding fs_device. This patch changes the name of
this function to get_fs_device_and_root_path to better reflect what
the function does and changes the return type to struct fs_device_d.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove GPIO2.6 setup from lowlevel_init. It can be defined in board
initialization code if it necessary.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox will use DHCP and pass the result to the kernel
update the help
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use rootpath as nfsroot and bootfile as kernelimage if present
when ip mode is dhcp
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To reduce the size of the MLO we have to activate thumb-2 support.
Otherwise the board will not boot.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a OMAP4 specific GMPC nand config for pcm049 and phyCARD-A-XL2 to increase
performance. Also add the possiblility to pass a board GPMC nand config.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drop kernelimage_type bootm now boots all of them.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for KS8851 16bit MLL chip from Micrel Inc.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Support for omap4 based Phytec phyCARD-A-XL2 board
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When programming or erasing a page, don't wait
systematically for 3s, but finish the operation as soon as
the hardware has finished, and timeout if 3 seconds have
passed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For net boot setups it is useful to submit boot params like server or
bootfile over dhcp. To distinguish barebox from e.g. pxe machines,
a custom vendor id can be sent in dhcp discover/request messages.
E.g. the ISC dhcp server can be configured with
| if substring(option vendor-class-identifier,0,8) = "barebox:" {
| next-server 192.168.3.24;
| server-name "192.168.3.24";
| option tftp-server-name "192.168.3.24";
| option root-path = concat("/srv/sysroots/by-mac/",
| binary-to-ascii (16, 8, "-", substring (hardware, 1, 6)));
| }
to sent boot params which are valid for barebox hosts only.
Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
Jean-Christophe PLAGNIOL-VILLARD:
- update the use dhcp command option
- support to set the vendor via env dhcp_vendor_id
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- use tslf
- bootm: enable oftree and uimage support
- enable mmu support
- drop cfi support (no nor on the board)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
update fancy prompt to be the same as the other Atmel board
use the same feature on 9g10ek and 9261ek
- use tlsf
- enable MMU
- set max size to 256KiB
- bootm: add initrd support
- nand: drop non used hw ecc and oob device
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- set max size to 256KiB
- enable MMU
- bootm: enable oftree and initrd support
- nand: drop non used hw ecc
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
most of the board does not have a nor soldered
update the nand partition table to boot from nand with bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This will ensure that we send an other packet only when the first one is send.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If we want to trap the processer in the exception vectors
we have to use unconditional branch instructions. I don't
know what I thought when using bne :-/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This shrinks the resulting binary size by ~25%. Exceptions
are still handled in arm mode, so we have to explicitely
put .arm directives into the exception code. Thumb-2 mode
has been tested on i.MX51 Babbage board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a read or write operation encounters an error, the card
might stay in "recv" or "data" state, and never get back to
"tran" state.
In these cases, the host is required to send a CMD12 (end
transmission) to switch the FSM of the card back to "tran"
state, as described in MMC Specification, chapter "Data
Transfer Mode".
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add Mitac MioA701 board initial support.
The support provides basic boot and :
- a console over USB (serial gadget).
- the SD card support
- the MTD docg3 support
- the LCD support
Add a check in the default environment for a barebox.env
file on the first partition (FAT). If the file exists,
source it instead of the normal boot procedure.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to get the runtime offset of the board_init_lowlevel_return
by doing a &board_init_lowlevel_return. This does not work in thumb-2
mode, so use a separate linker section for this function instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Traditionally U-Boot and barebox have the exception vectors at
the start of the binary. There is no real reason in doing so,
because in the majority of cases this data will not be at 0x0
where it could be used as vectors directly anyway.
This patch puts the vectors into a separate linker section and
defines an head function which is placed at the start of the
image instead. Putting this in a separate function also has
the advantage that it can be placed at the start of images
which require an additional header like several Freescale i.MX
images. As the head function contains the barebox arm magic
those images can now also be detected as barebox images.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Teresa Gámez
Jan Weitzel
Robert Jarzmik
Michael Grzeschik
Enrico Scholz