No need to check for the result and increases the chance that we
build a binary without the rarely used calloc function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds Altera UART driver. Kconfig and Makefile are
updated to include this new driver.
Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never supported the sigmatel stm chips and probably
never will. So do the first step and rename the architecture
to mxs just like in the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the platform should configure pins to be used by the driver.
The driver must work independently from the settings.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX23 currently uses kHz as the unit for its clock handling and calculation
to avoid overflows when calculation with the internal 480 MHz PLL and its
fractional divider. This patch changes all routines to accept Hz and deliver
Hz as the clock unit.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fucntion s3c24x0_serial_flush() could behave wrong
because of missing brackets. Correct condition logic.
Problem found by sparse.
Signed-off-by: Marek Belisko <marek.belisko@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX23 comes with a special UART dedicated for debugging purposes. This one
is mostly used for the console the user can reach.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
before if you specify id = 0 the next available id will be taken
otherwise fail if already registered now as in linux we use -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this implementation is based on linux one (v2.6.35-rc5-76-gd0c6f62)
it will calculate all the clock dynamically instead of statictly
this will use also the new clock framework
it will also print the clock status after the console init
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It includes a
- driver for the internal UART
- driver for the internal NAND controller
- support to boot from NAND
- PLL handling
- SDRAM initialisation
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
We need this function for MX35 support since the uart clock is not
equal to perclk1 anymore. Uh, it's really time to implement some
real clock API instead of this cruft.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[Patch 09/17] U-Boot-V2:Serial: Add support for NS16550 Driver.
This introduces support for NS16550 and related OMAP support. This driver is a port from Uboot v1 driver from OMAP's Uboot tree.
OMAP U-Boot V1 source is available here: http://linux.omap.com/pub/bootloader/3430sdp/u-boot-v1.tar.gz
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
Sascha Hauer
Franck JULLIEN
Krzysztof Halasa
Juergen Beisert
Marek Belisko
Jean-Christophe PLAGNIOL-VILLARD
Matthias Kaehlcke
Marc Kleine-Budde
Juergen Beisert
Ivo Clarysse
Nishanth Menon
Juergen Beisert
Sascha Hauer