During of_state_fixup() we have to write the #address-cells and #size-cells
property of the node we're copying the data to, not the "root" node of the
device tree we're working on.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch registeres a DT fixup, that copies the statate nodes from the active
to the kernel DT. The backend reference will be a phandles.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
[ukl: add call to of_unregister_fixup]
This patch improves the backend property, it can be either a phandle or a
of_path. During probe() of the state driver the backend property is
dereferenced and the resulting of_path is saved in the state context. In a
later patch it will be used to generate a phandle reference to the backend
during DT fixup.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds the functionality to export the description of the state, but
not the contents of the variables to a DT node. This will be used in a later
patch to "copy" the state description to the kernel device tree during DT
fixup.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This function is needed when a device that already registered a fixup in
the probe routine fails later to probe completely. Without unregistering
the fixup the function might later be called with invalid data.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Forwarded: id:1431771149-27265-1-git-send-email-u.kleine-koenig@pengutronix.de
Otherwise compilation may fail with:
include/fdt.h:11:15: error: unknown type name 'uint64_t'
static inline uint64_t fdt64_to_cpu(uint64_t x)
include/of.h:22:19: error: field 'list' has incomplete type
struct list_head list;
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Applied-Upstream: v2015.06.0, commit:9e69a04222ee88c51bd5ca4f802b5fa5ad42b0f8
As expected, we would need deferred probing sooner or later. This is
a first approach to allow devices to return -EPROBE_DEFER and get
sorted into a list of deferred devices that will be re-probed later.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Origin: v2015.06.0, commit:ab3da15bc14cc5297b2da27eb3dcd8d70dac41df
This fixes: 80264a8 driver: Call bus->remove instead of driver->remove
On mvebu it happens that:
Upon device shutdown, when iterating through the active device list,
the phy0 device is removed before mdio-mvebu. Then, when the mdio bus
device is removed, the phy0 device is removed again, here:
mdio_bus_remove(on mdio-mvebu)
mvebu_mdio_remove
mdiobus_unregister
unregister_device
mdio_bus_remove(on phy0)
Fix this by setting the mdio busses phy_map[phy->addr] to NULL when
unregistering the phy device, so that mdiobus_unregister no longer
finds a valid phy_device when iterating over the busses device list.
Reported-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
This was erroneously left uninitialzed as nothing was using it.
The i.MX6 PCI driver needs this to be filled properly to decide
if a config space access is allowed for a specific devfn.
This fixes PCI enumeration on the Gateworks GW54xx board.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bridge device needs to be registered and activated before
the scanning can proceed, as the bridge is the parent for other
devices.
This fixes a NULL ptr derefernce when scanning PCI hierarchies
with bridges behind bridges.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The e1000 driver uses the dma coherent functions
and thus can only be build for architectures implementing them.
Here is mips malta build error log:
drivers/built-in.o: In function `e1000_transmit':
drivers/net/e1000.c:(.text.e1000_transmit+0x80): undefined reference to
`dma_sync_single_for_device'
drivers/built-in.o: In function `e1000_poll':
drivers/net/e1000.c:(.text.e1000_poll+0x60): undefined reference to
`dma_sync_single_for_cpu'
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get the number of address cells and size cells we have to use
the newly created partition node, not the parent device node. The
parent device node returns the address/size cells of the controller
node, not the partition node.
On an am335x machine this fixes the device tree passed to Linux.
The situation there is:
...
gpmc@50000000 {
...
#address-cells = <0x2>;
#size-cells = <0x1>;
ranges = <0x0 0x0 0x8000000 0x10000000>;
...
nand@0,0 {
reg = <0x0 0x0 0x0>;
#address-cells = <0x1>;
#size-cells = <0x1>;
...
partition@7 {
label = "system";
reg = <0x220000 0x7de0000>;
};
};
};
and without this patch barebox passes three bytes for
partition@7's reg property instead of only two which naturally
confuses Linux and yields to the system partition to start at 0
with a size of 0x220000.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The board code uses quite a few OF functions and it doesn't seem
reasonable to run this board without DT support.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When working with non-coherent transfer buffers, we have to sync
device and cpu for outgoing and incoming buffers. Fix the driver where
non-coherent buffers are used in device context.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reviewed-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
PBL_CONSOLE option is used only for building PBL. See this output:
barebox$ git grep PBL_CONSOLE
arch/arm/configs/tx28stk5_defconfig:CONFIG_PBL_CONSOLE=y
common/Kconfig:config PBL_CONSOLE
common/Makefile:pbl-$(CONFIG_PBL_CONSOLE) += memory_display.o
include/printk.h: (defined(__PBL__) && defined(CONFIG_PBL_CONSOLE))
include/stdio.h: (defined(__PBL__) && defined(CONFIG_PBL_CONSOLE))
lib/Makefile:pbl-$(CONFIG_PBL_CONSOLE) += vsprintf.o
pbl/Makefile:pbl-$(CONFIG_PBL_CONSOLE) += console.o
PBL_CONSOLE looks confusing in PBL-less configuration
so it's better to enable it only if PBL is enabled.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the Intel XScale PXA270 development system platform.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As hinted in the linux kernel driver, pxa platforms such as mainstone,
stargate and idp have a broken design, where half-word writes not
aligned to a word address are not working.
This patch is a taking back the half-word write accessor for this
specific case from the linux kernel.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The configuration and control setup introduced in commit "extend the
driver for 91c94 and 91c96 support" suffers from a typo defect, which
makes the commit broken.
The typo happens to be in barebox tree, while it's not in the tested
patches I had, and there was a mismatch in my former submission, which
is fixed by this patch.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
Documentation/boards/am335x.rst:51: WARNING: Title underline too short.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Marvell Neta's transmit descriptor (txdesc) is allocated by dma_alloc_coherent()
but not zeroed before calling mvneta_send the first time. This can cause spurious
transmit errors due to improperly set bits in txdesc's cmd_sts field.
Fix initial transmit errors by always writing whole cmd_sts field instead of ORing
the bits.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Disable the watchdog powerdown counter at start. Otherwise this may
trigger a reset or poweroff over the WDOG_B line to a PMIC. This counter
is set to 16 seconds after poweron.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Replace the set_timeout function in the device platform data by an ops
struct which stores a set_timeout and init function.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Commit b8a1bb1dd2 (pci: defer device registration until after bridge setup)
changed the activation order of devices, so that bridges above the devices could
be configured properly before activating the devices below. This commit failed
to acknowledge that there may be devices located directly on the root bus without
any bridge in between and so those devices would never get enabled.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Marc Kleine-Budde
Uwe Kleine-König
Sebastian Hesselbarth
Sascha Hauer
Lucas Stach
Antony Pavlov
Lucas Stach
Robert Jarzmik
Robert Schwebel
Markus Pargmann