For OMAP4460 omap4_scale_vcores must set the voltage according to mpu freq.
OPP100 700MHz 1210mV
OPPTB 920MHz 1320mV
OPPNT 1200MHz 1380mV
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In omap4_enable_all_clocks we not only enable the mcbsp clocks, but also
change the source from ABE_24M_FCLK to 24M_FCLK. Revert this and default
to the reset state.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes boot_mode detection for non-internal boot and
bootsource detection for i2c boot. Further, the bootsouce_instance
is now determined for spi, i2c, and mmc/sd boot.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
By default CONFIG_JZ4750D_DEBUG_LL_UART0 is selected.
This can confuse the Ritmix RZX50 user as the board
has only UART1 connected.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit moves the C debug_ll code from
the MIPS <debug_ll_ns16550.h> header file to
the MIPS <asm/debug_ll_ns16550.h> header file,
so the C code and the asm code can use the same
register address macros.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Set fake DEBUG_LL_UART_DIVISOR to use <asm/debug_ll_ns16550.h>.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Set DEBUG_LL_UART_DIVISOR to use <asm/debug_ll_ns16550.h>.
The JZ4755 uses 24 MHz as the main reference frequency (EXCLK).
The UART controller can work on full EXCLK or on EXCLK/2.
Just now we use EXCLK/2 legacy clock setup made by U-Boot.
So set UART controller base frequency to 12 MHz.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds macros for ns16550 port initialisation
and single char output. The macros can be used in
MIPS asm pbl code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Ingenic JZ4755 SoC (JZ4750D family) has three UARTs.
So we can give to the user choose which one of them
to use for low level debug (debug_ll) output.
Also this commit adapts the only JZ4755 board
(Ritmix RZX50) for using the new debug_ll port
selection.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In case he configures with make ARCH=x85 menuconfig,
config SPI will be set to "y". And he will got an error on spi.h.
Signed-off-by: Masaki Muranaka <monaka@monami-ya.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
After Reset VMMC goes to default VSEL. This is not a clean power cycle for
some SD cards.
Set flag WR_S for VMMC to avoid going to default VSEL.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The I/O accessors in_bexx, out_bexx, in_lexx and out_lexx are updated
to the latest Linux version.
The patch is tested on a MPC8544 based board and solved I/O access
issues on I2C devices.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To prepare for an update of the I/O functions to the latest Linux
version, the indentation is fixed.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In barebox we have no CONFIG_MIPS_MT_SMTC Kconfig option.
So remove the code under this macro.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds several missing includes to files under include/ which
we relied on being included implicitly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without devicetree support we print the Kernel commandline in
verbose mode. Do the same with devicetree boot aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
when doing bootm -v -v we dumped the original tree to the console.
Make sure to print the fixed tree instead so that the fixups can
be examined.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds host tools for i.MX to generate the i.MX internal
flash header format and a tool to upload these images to an
i.MX SoC via USB.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a port of the official PLL errata workaround from Freescale.
The PLL's in the i.MX51 processor can go out of lock due to a metastable
condition in an analog flip-flop when used at high frequencies.
This workaround implements an undocumented feature in the PLL (dither
mode), which causes the effect of this failure to be much lower (in terms
of frequency deviation), avoiding system failure, or at least decreasing
the likelihood of system failure.
This is based on U-Boot commit:
commit 9db1bfa110ac411ab3468e817f7f74b2439eb8c8
Author: David Jander <david@protonic.nl>
Date: Wed Jul 13 21:11:53 2011 +0000
ARM: MX51: PLL errata workaround
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Teresa Gámez
Jan Luebbe
Jan Weitzel
Markus Niebel
Philipp Zabel
Antony Pavlov
Sascha Hauer
Masaki Muranaka
Oleksij Rempel
Alexander Shiyan
Renaud Barbier