To allow init code that depends on the environment being loaded.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When setting a device parameter fails not only the error code
is of interest, but also what the parameter name is, what the
device name is and whether a device was found for this name.
Add this information to the error message.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch factors out the wait-for-key-press loop from the shell command
"timeout" into a sparate file, so that it can be used from C, too.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
PBL_CONSOLE option is used only for building PBL. See this output:
barebox$ git grep PBL_CONSOLE
arch/arm/configs/tx28stk5_defconfig:CONFIG_PBL_CONSOLE=y
common/Kconfig:config PBL_CONSOLE
common/Makefile:pbl-$(CONFIG_PBL_CONSOLE) += memory_display.o
include/printk.h: (defined(__PBL__) && defined(CONFIG_PBL_CONSOLE))
include/stdio.h: (defined(__PBL__) && defined(CONFIG_PBL_CONSOLE))
lib/Makefile:pbl-$(CONFIG_PBL_CONSOLE) += vsprintf.o
pbl/Makefile:pbl-$(CONFIG_PBL_CONSOLE) += console.o
PBL_CONSOLE looks confusing in PBL-less configuration
so it's better to enable it only if PBL is enabled.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We will use random 32 bytes salt and 10000 round to generate a
32 bytes key.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow as example to list the currently supported digest.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a framework to describe, access, store and restore a set of
variables. A state variable set can be fully described in a devicetree node.
This node could be part of the regular devicetree blob or it could be an extra
devicetree solely for the state. The state variable set contains variables of
different types and a place to store the variable set.
For more information see:
Documentation/devicetree/bindings/barebox/barebox,state.rst
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now you need to call digest_alloc and when you finish to use it digest_free.
We need this for upcomming aes encryption support and secure boot
as we will need multiple instance of the same digest.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to move from a one at a time digest to a multi-instance
with too much impact on the code using it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
with not the rest of the implementation
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It doesn't make much sense to have a console in the pbl
but not in the main barebox binary.
Fixes:
pbl/console.c:34:5: error: redefinition of 'ctrlc'
include/stdio.h:60:19: note: previous definition of 'ctrlc' was here
pbl/console.c:39:6: error: redefinition of 'console_putc'
include/stdio.h:49:20: note: previous definition of 'console_putc' was here
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves fallback to default into the envfs_{load,save} functions.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It is a lot more user friendly if we give a bit more feedback.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some SoCs have special device pins for external reset signals.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
reset_source_init used to set the reset source to unknown in a
coredevice_initcall. This means if reset_source_set() has been called
earlier the value would have been overwritten. Fix this by calling
globalvar_add_simple() each time reset_source_set() is called.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It doesn't make much sense to have the menuframework but no
shell.
Fixes:
In function `menu_action_command': undefined reference to `run_command'
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel command line option blkdevparts works like mtdparts, but for all
block devices. So it can be used for eMMC devices without the need of a
traditional partition table.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If CONFIG_CMD_IMD is not set there is no imd_command_setenv in the
barebox binary that can be linked to. Although the whole imd infrastructure
will be removed by the linker later in the build process as soon as it
figures out that nothing inside barebox is using it, we still have to
provide a dummy function to keep the build going.
Fixes:
In function `imd_command': undefined reference to `imd_command_setenv'
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The PBL has console support now, so add memory_display support aswell
which can be a good debugging aid.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So they aren't build when no console support is selected.
Fixes:
In function `console_get_by_dev': undefined reference to `console_list'
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use dynamic number id with specific devname
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file originates in Linux. Linux has it under include/linux/
directory since commit dccd2304cc90.
Let's move it to the same place as well in barebox.
This commit was generated by the following commands:
find -name '*.[chS]' | xargs sed -i -e 's:<sizes.h>:<linux/sizes.h>:'
git mv include/sizes.h include/linux/
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To make it possible to call the pr_* functions very early before
malloc is initialized test if malloc is available before using
it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds simple console support to the PBL which makes it
possible to print more complex messages in the PBL than just
strings or hex numbers. For now puts_ll is used to print the
messages, so it depends on CONFIG_DEBUG_LL which makes it
more a debugging option. However, this could be extended later
to get regular output from the PBL if desired.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
panic() is not really a printf like function, so move it to common/misc.c.
This is done because we want to have printf support in the PBL, but PBL
has it's own panic() implementation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The netconsole needs to be able to deny activation when the network
has not been enabled. Add an optional callback to the console for
this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Thanks to the wonders of UEFI we have to walk down the
device path all the way until we arrive at the device
we got this path from...
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
BROKEN is a developer option to keep things in the tree we know
are broken. Make this option invisible so that randconfig builds do
not enable it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CPU_ARM946E is selected by boards, so letting it depend on !MMU
leads to broken dependencies. Let MMU depend on !CPU_ARM946E instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Blspec is a consumer of the flexible bootargs mechanism, so it should
depend on it rather than select it.
Fixes:
warning: (BLSPEC && DEFAULT_ENVIRONMENT_GENERIC_NEW) selects FLEXIBLE_BOOTARGS
which has unmet direct dependencies (COMMAND_SUPPORT && CMD_GLOBAL)
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes
common/firmware.c:206:2: error: implicit declaration of function 'copy_file'
in a number of configuration where this file isn't pulled in through
other headers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
LBAs are numbered starting from zero so the last LBA # would be equal
to total number of blocks minus one.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The warning is correct in that we pass in size_t instead
of int. As we are not interested in the size of the
property at this point, just remove the assignment.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This moves the variable assignments previously done in /env/config-board
to non volatile variables in /env/nv/. This makes the settings adjustable
by the user without editing a file.
Most of the changes are simple conversions which for many boards makes
/env/config-board unnecessary. Some boards had some logic to assign
global.boot.default based on the current bootsource. This has been
moved to /env/init/bootsource. An additional check is added to not
overwrite a nv.boot.default should it exist.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This could previously only be done with 'devinfo global'. While
this is still possible this adds a more direct access via the
globalvar command. This variant also adds a '*' in front of
the variable if the corresponding non volatile variable exists.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds (back) support for non volatile variables. Non volatile
variables are variables which are stored in the environment over
reboot. They are used in the same way as the global variables, but
with a 'nv' command and device. The variables are stored under
/env/nv/, one variable per file. Adding a nv variable automatically
adds a global variable with the same name. Changing a nv variable
also changes the same global variable, but not the other way round.
This allows for example to configure the username as:
nv user=sha; saveenv
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of storing the complete files with a 'saveenv' command
only store the files that have changes to the default environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Collect all files in a list first and iterate over the list
when creating the actual environment image. Makes the next
patches easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes mbr is erroneously recocognised as FAT partion. Due to this the mbr
partition parser is not being called and the partitions on the media are not
detected. This patch should fix the problem. The checking is done as in the
linux kernel.
I have seen the problem using usb sticks. Although partitioning and formatting
them under linux. The file system type field in the mbr remains there which
causes the wrong detections as FAT32 type and not as mbr.
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds xz decompression support from the kernel. Both compressing
the barebox binary with xz and decompressing xz files on the commandline
is supported.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some SoCs are able to detect if they got reset
in response to an overtemperature event.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_add_param creates a new parameter so it makes more sense to
return it than to return an error code. Since the return value
is hardly ever checked this is only a small patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a buffer for log messages and a 'dmesg' command to
print the messages. The log buffer is implemented as log objects
rather than a string buffer. This makes it easy to implement
limiting the messages, cleaning the buffer and timestamping
the messages.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Print the banner with pr_info, but the empty lines before and after
it with printf. This makes the banner show up in the log show up
properly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
make it possible to call get_time_ns() before the clocksource
has been registered. Just return 0 in this case which is still
better than crashing the system.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For measuring the startup time it's useful to save the first
timestamp after the clocksource has been registered.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This framework handles a list of registered Firmware programming handlers
to unify a firmware programming interface by hiding the details how
to program a specific Firmware in its handler. This is created with FPGAs
in mind but should be usable for other devices aswell.
A user has two possibilities to load a firmware. A device file is create
under /dev/ which can be used to copy a firmware to. Additionally a
firmwareload command is introduced which can list the registered firmware
handlers and also to upload a firmware.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:
- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property
Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.
Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.
There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.
For device tree boards the model and of_compatible tags are automatically
generated.
Example output of the imd tool for a Phytec phyFLEX image:
build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have our file helper functions in several places. Move them
all to lib/libfile.c.
With this we no longer have file helpers in fs/fs.c which contains
the core fs functions and no functions in lib/libbb.c which are
not from busybox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On several i.MX boards we register SDRAM with the values
from the SDRAM controller and also with values from the
device tree. This now issues a warning each time the board
is started. Revert the commit for now.
A better solution might be to check if the same SDRAM region
already exists before trying to register it again.
This reverts commit c9e2e08edc.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to be able to mark an stored envfs image with special features
(intentional ignore for example), we now can feed forward these flags.
By forwarding a '0' for the flags nothing changes because the envfs superblock
was already allocated with xzalloc.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a simple flag to envfs to be able to mark an external environment as
"not to be used".
This change should not affect existing systems, because the current envfs
implementation ensures the 'flags' member in the envfs master block is always
zeroed.
Signed-off-by: Juergen Borleis <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Compiling the tree with allyesconfig is helpful because different
compilers (gcc, clang) or static checkers (e.g. clang's scan-build)
can then process and check more code.
This patch introduces two new configuration symbols that Kconfig files
can depend on. That way, code that is only working where a cache or DMA
implementation exists can be opted out.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we only have version_string which contains information
about the date the binary was compiled and by whom it has been
compiled. This adds a release_string which only contains the
plain release version.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The dfu command parses a string which contains a list of
devices and flags. This format is useful for other users
aswell, so add common helper functions to parse it and
let the dfu command use this format.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
During debugging it sometimes helps to me even more verbose. This
adds an additional debug level for this. Also we remove an already
existing pr_vdebug definition in the USB gadget u_serial driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
use in devinfo Protocols
Tested today on qemu with all the GUID translated
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With upcoming EFI payload support the efi.h file will diverge
from the kernel, so move it from include/linux/ to include/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a devname field to struct console_device so that the device
name can be set by the driver. This makes it possible to have
persistent device names.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some devices may have a much more efficient way to output strings
rather than single characters. Let console devices implement a
callback for this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
remove unused function declarations and definitions:
- vallocc is #if 0 in source code
- pvalloc is defined but not used
- cfree is defined but not used
- malloc_usable_size is unused
- mallopt is not defined
- mallinfo is not defined
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Just returns error code instead of 0 or 1.
With this fix, $? is set to child exit code in all cases.
Without this fix, /child $PATH;echo $? displays 1 even if
child script calls exit with a specific non zero error code.
Signed-off-by: Herve Codina <Herve.CODINA@celad.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The menutree doesn't select CONFIG_GLOB, but it depends on it. Without
it will just hang. So let it select it automatically. Also remove the
dependency of CONFIG_GLOB on CONFIG_HUSH, because glob() will run with
the simple shell as well.
Also let CONFIG_MENUTREE select on CONFIG_GLOB_SORT. While is not
strictly needed, many people use menu/00-foo menu/10-bar menu/20-barf
to sort their menu entries. So select it out of convenience.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Crazy things happen if there are resource conflicts and a device probe
runs dev_request_mem_region. The dev_request_mem_region returns a
start pointer which is zero. The probe function doesn't check on this
and probing the device on zero base address.
To debug this in debug log level there are many other outputs. This patch
replace the debug print to a warning printout. A conflict should
normally never happen. If there is a conflict it's much easier to see it
with this patch.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed; The FSF site says that
address is
Free Software Foundation
51 Franklin Street, Fifth Floor
Boston, MA 02110-1301
USA
(see http://www.fsf.org/about/contact/)
Instead of updating it each time the address changes,
just drop it completely treewide.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* fix indentation of options in 'help bootm'
* add missing help for -m
* put some output into debug/verbose mode
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
I assume I am the only person knowing that barebox is able to
merge devicetrees. This feature seems broken for a while now since
trying to merge devicetress results in:
unflatten: too many end nodes
Remove this feature to save the complexity.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The of_* commands take devicetree nodes as parameters. Add a
devicetree completion function to ease passing nodes to these
commands.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the command specific complete callbacks only work when no
option is typed already. For example "devinfo <tab><tab>"
correctly completes the devices, but "devinfo -x <tab><tab>"
does nothing. That is because the options are passed to
the input string of the completion handlers. Skip the option
string by finding the last space in the input string. This
is not perfect since "devinfo -f<tab><tab>" still does not
work, but it's better than what we have now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In case of device parameters setting variables may fail. return
the result of set_local_var so that the user has a chance to detect
the failure with $?.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* this compile option actually turns on a command, so name it
accordingly
* also move the Kconfig definition into commands/Kconfig, thus
placing getopt into the "Shell scripting commands" section
* while at it, improve Kconfig documention
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
* CMD_MEMORY was defined both in common/Kconfig and commands/Kconfig
* that symbol turned not a command on, but just the compilation of
commands/mem.c, so rename it accordingly
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch does probably too much, but it's hard (and very
cumbersome/time consuming) to break it out. What is does is this:
* each command has one short description, e.g. "list MUX configuration"
* made sure the short descriptions start lowercase
* each command has one usage. That string contains just the
options, e.g. "[-npn]". It's not part of the long help text.
* that is, it doesn't say "[OPTIONS]" anymore, every usable option
is listed by character in this (short) option string (the long
description is in the long help text, as before)
* help texts have been reworked, to make them
- sometimes smaller
- sometimes describe the options better
- more often present themselves in a nicer format
* all long help texts are now created with BUSYBOX_CMD_HELP_
macros, no more 'static const __maybe_unused char cmd_foobar_help[]'
* made sure the long help texts starts uppercase
* because cmdtp->name and cmdtp->opts together provide the new usage,
all "Usage: foobar" texts have been removed from the long help texts
* BUSYBOX_CMD_HELP_TEXT() provides the trailing newline by itself, this
is nicer in the source code
* BUSYBOX_CMD_HELP_OPT() provides the trailing newline by itself
* made sure no line gets longer than 77 characters
* delibertely renamed cmdtp->usage, so that we can get compile-time
errors (e.g. in out-of-tree modules that use register_command()
* the 'help' command can now always emit the usage, even without
compiled long help texts
* 'help -v' gives a list of commands with their short description, this
is similar like the old "help" command before my patchset
* 'help -a' gives out help of all commands
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch corrects exporting unsigned 64-bit environment variables.
I had left out a signed off line before.
Signed-off-by: Michael Burkey <mdburkey at gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The purpose of envfs_register_partition is to print an error
message when the partition does not exist. Print an error message
from generic code instead and drop this function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cast prevents us from doing proper error checking.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This most likely doesn't fix any real bugs, but it's the
right thing to do and reduces the noise level with static
checkers.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Properly detect when an environment file is truncated. This can happen
when a previous saveenv failed because the environment partition is too
small.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The return value check of the write call is completely bogus. We
check if we have written at minimum sizeof(struct envfs_super) bytes
instead of all bytes. Properly check for all bytes written instead
and allow write to write less bytes than requested.
Do not use write_full because this file is compiled for userspace
aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rework the current framework so that I/O mapped I/O resources are
also possible.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
envfs_load_data needs a pointer to the envfs_super, otherwise it
works on an unitialized struct when detecting the envfs version.
This is broken since:
| commit 0a2a8f7059
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Thu Feb 20 08:16:01 2014 +0100
|
| environment: Add function to load envfs from buffer
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Grmpf. Most compilers do not issue a warning, only the blackfin
gcc 4.3.5 warns about this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Creating menus from the shell using the regular 'menu' command is rather
complicated. This adds a 'menutree' command which creates a menu from
a directory structure. In the directory structure each directory corresponds
to a single menu entry. The directory contains the following files:
title - A file containing the title of the entry as shown in the menu
box - If present, the entry is a 'bool' entry. The file contains a variable
name from which the current state of the bool is taken from and saved
to.
action - if present this file contains a shell script which is executed when
when the entry is selected.
If neither 'box' or 'action' are present this entry is considered a submenu
containing more entries.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a bootspec entry has the 'devicetree' property specified, check
if the tree is compatible with the currently running machine, otherwise
ignore the entry. This makes it possible to have entries for multiple
machines on an SD card and pick a suitable one.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add DDR3 SPD verification support for use by the PPC 8xxx DDR driver.
This is based on the equivalent files from U-Boot version git-be937b5.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this barebox can start root filesystems containing bootloader
spec entries via NFS. It is used as:
boot nfs://<ipaddr>[:<port]//path/to/nfsroot
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The defaultenv-2 has ifup support as a shell script. This patch
replaces it with a command which is more robust, can be called
from C and now can also bring up all configured interfaces.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
DFU is for device firmware upgrade, but for development purposes it's
sometmes useful to just start a kernel vie DFU. This adds a boot option
for doing this and also the corresponding counterpart on the host. With
this it's possible to boot a system with:
scripts/dfuboot.sh -k linuximage -d dtb -c "root=ubi0:root ubi.mtd=ubi rootfstype=ubifs ignore_loglevel"
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We can compile barebox for multiple boards at once, but currently
they all share a single default environment. This patch adds a
defaultenv_append() which boards can call to customize the default
environment during runtime. Each board now generate default environment
snippets using bbenv-y and add them during runtime with defaultenv_append()
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default environment buffer is an unsigned char array and thus
may be unaligned. Some decompression algorithms expect the buffer
to be sufficiently aligned for u32 accesses. We make this sure by
copying the default env to a temporary buffer. Instead of doing this
just add a __aligned(4) to the default environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of asking explicitly for the default environment compression
type ask for the in-barebox default compression type. This also adds
a DEFAULT_COMPRESSION_SUFFIX make variable which can be used together
with the wildcard rules for compressed files to generate compressed
files without explicitly support each compression type.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Finding out whether to rebuild the environment is a difficult task
since we have to track all files in a directory. Instead of trying
this, just rebuild the environment during every build and only if
it differs to the last one overwrite the target. This way make
only sees a change when the environment is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CHECK common/kallsyms.c
common/kallsyms.c:170:12: warning: symbol 'kallsyms_lookup' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We check whether the file passed as devicetree actually is a devicetree,
but we missed to return an error if it's not. Fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Similar to mount(8) the barebox command mount now supports passing a string
to the file system driver via -o.
This is used in the next commit to let the user specify port numbers for
nfs mounts.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
free() already checks the pointer to be non
NULL. No need to do it again.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to load all the lowlevel init code, including the
uncompressor, inside SRAM and not just the bare init part. This is
useful when pbl is used as a first-stage bootloader but is loaded by an
external firmware.
Signed-off-by: David Vincent <freesilicon@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
default_environment_path only exists when CONFIG_ENV_HANDLING is enabled.
Boards would have to #ifdef this if they wanted to use
default_environment_path. Use accessor functions instead which can
be ifdeffed on a single place.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Linux specifies the linux,stdout-path property in the /chosen node
in the devicetree. Unfortunately this is ignored in most cases.
For cases in which barebox uses this property for its own use we
translate this into a Linux boot arg with:
- the console name provided by the serial driver
- the the instance from the 'serial' alias
- the baudrate from the actual baudrate.
So with this it's for devicetee enabled boards no longer necessary
to manually assign a console= parameter. Should a user not want
to use the automatically assigned parameter it should do:
global.linux.bootargs.console=
in the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The common bootm code used to load uImage contents to SDRAM
before calling into the handlers if possible. This makes the
handlers complicated since they have to handle many cases. Instead,
introduce a helper to load the os after the handlers have figured
out a good load address.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes execution of a function has to be delayed, for example
when a backlight can only be turned on when the picture has stabilized.
To help in such situations add a convenience function around the poller
stuff to call a function after a delay.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
