remap_cache currently does not work, so enabling the MMU in the
PBL currently does not make sense. Disable it for now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
via -r opt, global.dhcp.retries or dhcp_retries
set the priority order;
This will allow to do not stay infinite loop if no dhcp available
for boot sequence as example
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This will allow to only update a var if recive a valid data.
This is need for hostname.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This way you can specify as previously set the dhcp parameter via global.dhcp.xxx
and get the result via global.dhcp.xxx
This is need for the defaultenv-2 to add the bootp suppport.
Use it on defaultenv too to have only one set of var.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
since 99e72c8bbd on an i.MX51 based board,
I get : "phy0: Link is up - 1000/Full". It seems miidev tries to probe
the PHY to early and gets 0x3ffff which leads to the wrong capabilities
setting.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to do not have 2 set of var for defaultenv and the new
defaultenv-2.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The following missed to add a jump to board_init_lowlevel_return for the
phycard pca100 board:
| commit 244198ea8b
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sun Jul 8 18:30:42 2012 +0200
|
| ARM boards: Use _text rather than TEXT_BASE
|
| With compressed image support TEXT_BASE will become the base
| address of the uncompressed image. What the boards want instead
| is the base address of the decompressor code or, if not compressed,
| the base address of the uncompressed image. Use _text which is
| the correct one for both cases.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes it by adding the jump. Also imx_nand_load_image is directly
called from lowlevel_init.S which fixes compilation with pbl support
enabled.
Tested with both compression enabled and disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Booting from SPI on an AM35xx (and possibly other TI SOCs) requires
a special format:
- 32 bit image size in big-endian
- 32 bit load address in big-endian
- binary image converted from little- to big-endian
The mk-am35xx-spi-image tool converts barebox.bin to
this format.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is mostly useful during the initial port of barebox to a new
board which is supported by u-boot. It also allows starting barebox
from a SRAM-based u-boot SPL.
A different load address can be set like this:
make barebox.uimage UIMAGE_BASE=0x80000000
Also add barebox.ubl to CLEAN_FILES.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also pass flags using platform_data and remove useless casts from void*.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The _send function should not return the length of the transmitted packet.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The timeout for wating for the bus to be idle is too short when the
card does internal garbage collection. This was triggered with filling
an SD card under Linux with /dev/urandom, then doing a saveenv under
barebox afterwards.
Linux has timeouts here up to 300ms. Use a second to be safe.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cfa10036 board file were missing the length parameter when adding
devices. This made barebox crash early in the boot, in the mxs-mci
driver.
Provide the resources lengths in a consistent format.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
