miitool without arguments will try to show status for all phys.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With the -s option all mii buses can be scanned for devices so
that they are available without doing network operations. Also,
now *all* phy devices on a mii bus can be examined, not only
the one attached to an ethernet device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed when a phy gets registered outsize of phy_device_connect
but has to be attached to an ethernet device later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this phy_device_connect only registers a phy device if it wasn't
registered already. This allows us to register phy devices outside
of ethernet drivers. phy_device_connect will now pick up an already
registered phy given that it's not attached to another ethernet device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If during a phy_device_connect a phy already has an ehternet device
this can only mean it's already attached to another device. return -EBUSY
in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an ethernet device already has a phy in phy_device_connect all we
have to do is to start autonegotiation. Do this early and bail out
so that for the rest of the code it's clear that we have to search for
a phy device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
phy_register_device() currently requires an attached ethernet device.
This is not needed, a phy device can equally well be registered as
a standalone device without an ethernet device. Remove the need
for an attached ethernet device in phy_register_device. Also, make
the edev <-> phy connection on a registered device which simplifies
the code.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Beaglebone and the AM335x Phytec phyCORE can be compiled
together, so merge the configs into a am335x_mlo_defconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the boot information in the image itself and passing a pointer
around between images is cumbersome and doesn't fit well with multiimage
support where the pointer we pass around is already occupied by the
devicetree.
Do the same as U-Boot does and store the boot information at the bottom
of the SRAM public stack.
To maintain the compatibility between new xloaders and older barebox
binaries we still pass the boot information to the next stage via pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
barebox needs it to initialize the memory. While at it, give the
beabglebone black another name than the original beaglebone has.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As with devicetree support the binary will get too large for the
SRAM drop the configuration. It was mainly meant for debugging purposes
anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the am335x Phytec phyCORE to devicetree probe support.
For now we use a linked in dtb.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
An entry function should begin with a exception header. For this to work
properly the entry function should not contain any code which gcc might
put before the header. To make this sure change the ENTRY_FUNCTION macro
so that it generates one function which only contains the exception header
and a second function which contains the original body of the entry function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The multi image startup process used to have three binaries involved:
- The lowlevel board code to initialize SDRAM
- the uncompressor
- the regular (compressed) barebox binary
Drop the uncompressor and put the uncompress code into the lowlevel
board code binary. This makes the startup process easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the new Quartus II v13.1 generated sequencer_defines.h file.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Quartus II v13.1 generates updated sequencer.[ch] files.
Integrate the changes into the current driver.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds the crc32 command to be build
as host and optionally as target tool.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Antony Pavlov
Sascha Hauer
Du Huanpeng
Alexander Aring
Steffen Trumtrar
Michael Grzeschik
Lucas Stach