The old output of "help" was just producing a long list, that usually
scrolled of the screen (even on a X11 terminal). This list is more
compact, and also sorted by groups.
The old output format (plus grouping) is now available with 'help -v'.
Example:
Information commands:
?, devinfo, help, iomem, meminfo, version
Boot commands:
boot, bootm, go, loadb, loads, loadx, loady, saves, uimage
...
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From 4ea2bd2e1ca18136d7cfd61643bc8d8187b1495f Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Wed, 16 Apr 2014 17:45:18 -0700
Subject: [PATCH] Fix AT91 UDC driver on boards without vbus.
While porting Barebox to one of our boards, we found that the AT91 UDC driver
will fail to connect to USB hosts, and will spam the console with errors if
the VBUS pin isn't connected.
Signed-off-by: Owen Kirby <osk@exegin.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This most likely doesn't fix any real bugs, but it's the
right thing to do and reduces the noise level with static
checkers.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When no udc is registered it is clearly an error when usb_gadget_poll
is called. Let the upper layers know that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
free() already checks the pointer to be non
NULL. No need to do it again.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On the pcm038 the ULPI phy is found correctly, but after
a power cycle the attached devices are not found. Adding
some delay fixes this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ULPI code does not print a message when the operation times
out. Add one to the caller so that he gets an idea that something
is going wrong.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imx_chipidea_port_init() will be called during startup from
the ehci driver. Calling it before setting up the PORTSC register
is only necessary in HSIC mode.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i.MX5x OTG port is hardwired to the internal UTMI PHY, so having
this configurable makes no sense and helps using this port with DT.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since the mainline kernel now has its own dr_mode and phy_type DT-options
for setting modes of USB ports, do these kernel parameters compatible by
removing "barebox" prefix.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Host with inoperable ULPI able to bring the system into an
infinite loop. The patch adds error checking during initialization
to avoid this.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
None of the driver make the difference between STDOUT and STDERR.
So we just need to check if putc or getc are filled in the console_device
save 32 bytes on versatilepb
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl gadget driver wants to configure the portsc register
with information from platform_data. When registered from the
chipidea driver there is no platform_data. Fix the resulting
crash by not derefencing platform_data when NULL. In this
case the PORTSC register is not touched, it will have been
configured by the chipidea driver in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Probe ULPI phys during USB initialization and not during driver
probe. This lowers the pressure to have the necessary board specific
setup in place early.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to distinguish which USB port to fixup by pdev->id. This
is < 0 for devicetree probed devices all the time, so this won't
work anymore once we switch to devicetree. Do the fixup on every
port instead, it doesn't hurt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently we can only (re)scan all USB hosts. Add a function to
scan individual hosts. This is useful for implementing the detect
callback in the next patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A command should not be interested in the internal USB core state, so
move the state handling into the core.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This renames the USB devices to reflect the bus structure.
The base name for a USB device is usb<devno>. For each child
device we add a -<parent-port-no>. This makes it more easy
to identify devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This imports of_parse_phandle_with_args and of_count_phandle_with_args
from Linux OF API. The slightly different of_parse_phandles_with_args
is removed and all users are converted to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
To start synchronizing OF API of barebox with linux OF API, this adds
a length pointer to of_find_property. Also all current users of that
function are updated to reflect the API change.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This breaks HSIC and has no good justification why this would
be needed for ULPI.
This reverts commit 2e7d66f526.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards need some more tries to successfully detect a phy. This
happens for example on the pcm038. Try up to four times to detect a
phy.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fix chipidea-imx usb initialization.
"imx_chipidea_port_init" was moved before PORTSC setup in the
commit "USB i.MX chipidea: implement post init support". This
change breaks usb function with ULPI. Patch moves port initialization
back after PORTSC setup, so it works again.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
by reordering the entry, USB gadget support is now a menu and the
USB gadget choices are under this menu and not directly in the
driver menu.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides rename MFD-related symbols for using MFD-prefix.
Additionally, sorting mfd/Kconfig and mfd/Makefile records.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds USB gadget support to the i.MX chipidea driver. Basically
we have to add a register function to the fsl udc driver and call
this from the chipidea driver if device mode is selected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
HSIC needs some special setup for i.MX6. Most ugly detail is that
the HSIC needs help of the IOMUX to configure a pullup on the strobe
line. This has to be done after the ehci controller has started.
Fortunately there is only one muxing possibility for the HSIC ports
on i.MX6, so we can simply control the iomux from the usbmisc driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controllers need an init hook after the USB controller is
started, so implement the post init hook for i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to have no console support
Use full for bootstrap as we can save 6.5 KiB (barebox.bin) and
3.8 KiB (zbarebox.bin lzo) on at91sam9263 as example vs console simple
As on bootstrap we have often very limited size.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Checking the status field of the qTD token in the current code
do not take into acount cases where endpoint stall (halted) bit
is set together with XactErr status bit. As a result clearing
stall on an endpoint won't be done if this status bit was also
set. Check for halted bit and report USB_ST_STALLED status
if the host controller also indicates endpoit stall condition.
From u-boot by Anatolij Gustschin <agust@denx.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the current mmu support is broken
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows to register the USB ports for the chipidea driver. For
now the otg/h1 register functions also register the corresponding
USB phys.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This phy is found on i.MX6 and i.MX23/28. Currently tested only on i.MX6.
For now we take the easy way out. The phy is enabled upon registration.
More elaborated handling can be added later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The EfikaSB has a bug requiring to write to an ULPI register after
powerup. It doesn't seem that this this bug is present on any other
hardware, so add a workaround directly into the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Make the register defines for ULPI more complete. Also, Add a proper
ULPI_* Namespace to the existing defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For proper USB function the usbmisc registers have to be initialized.
This patch adds a driver which matches for the usbmisc registers. This
driver is called from a new driver which binds to the USB ports to
configure the misc registers. After that the driver registers the EHCI
driver and an ULPI transceiver if necessary. Currently only host mode
is supported, but device support can be added later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The EHCI core often is part of a otg core. Allow it to be registered
separately from another driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pass the return value from ulpi_probe in ulpi_setup instead
of returning -1 (which is -EPERM and does not make sense in
this context)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When using the serial console over USB to download files, and
when the USB bandwidth is pushed to its limits, the barebox UDC
device won't be able to absorb all the traffic.
Modify the u_serial gadget so that if there is not enough room
in buffers, don't push USB requests down the gadget driver, so
that it is saturated, and give it a chance to NAK requests.
The previous behaviour was loosing bytes (as kfifo_put is lossy).
The fixed behavious is lossless (based on USB NAK protocol).
While at it, increase a bit buffer sizes to 8kB to absorb heavy
transfers such as a linux kernel image.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In usb_hub_configure the hub is asked for its descriptor and among other things
its bPwrOn2PwrGood time. In the actual hub_power_on function this information
was not used and a hardcoded value was used instead. For some hubs this delay
is to short. So, use the delay the hub wants.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers use gpio_request/gpio_free. Currently no architecture
has code behind these functions. Provide static inline functions
for these and remvoe the at91 specific inline functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We do not need to invalidate the cache in the poll loop anymore
since the corresponding bit is now in a dma coherent area. Instead,
flush cache before hardware operation and invalidate afterwards. Put
the corresponding code inline since it's shorter.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There's no point in syncing them manually. Instead, use
dma_alloc_coherent and skip the manual flushing/invalidating.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is another variant of:
USB gadget fsl: request cacheline aligned buffer
The fsl udc driver allocates a buffer for small requests. The
driver then calls dma_inv_range later on it. This buffer happens
to be not cacheline aligned which means that a dma_inv_range can
corrupt other memory around the buffer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[mkl: use dma_alloc]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl udc driver allocates a buffer for small requests. The
driver then calls dma_inv_range later on it. This buffer happens
to be not cacheline aligned which means that a dma_inv_range can
corrupt other memory around the buffer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
[mkl: use dma_alloc]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have to set the name in struct usb_driver, not the one
in struct driver_d which gets overwritten with usb_driver->name
during registration.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is based on the following U-Boot commit:
commit 5f4b4f2fed3ab8590c8c06b78642f8c1467acacf
Author: Vincent Palatin <vpalatin@chromium.org>
Date: Mon Dec 5 14:52:22 2011 -0800
ehci: speed up initialization
According to EHCI specification v1.0, the controller should stabilize
the power on a port at most 20 ms after the port power bit transition.
So, we put this setting in the virtual descriptor corresponding field,
(bPwrOn2PwrGood = 10 => 10 x 2ms = 20ms), this saves about 500ms at each
controller initialization/enumeration.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
for chache handling the ehci driver iterates over the hardware lists
of QHs/TDs. As we have a fixed number of maximum entries in this lists
we can allocate them as arrays and and clean/invalidate the arrays
instead which is much simpler. While at it, move the allocation to
ehci_probe so that we do not lose memory each time ehci_init is called.
Also, use memalign to allocate the QHs/TDs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
drivers/usb/gadget/pxa27x_udc.c:1263:13: warning: 'pxa27x_change_interface' defined but not used [-Wunused-function]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ISP150x product line have same identifier, we can print these
chips as ISP150x.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we do not have ISP1504-related functions, we migrated to ULPI.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added ULPI detection function.
Same function from isp1504 driver removed.
Used implementation from Linux kernel.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These registers can be used for any standart ULPI chip,
not only for ISP1504.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The timings of the poller calling have changed, digging out
a latent bug in pxa27x udc controller.
The polling routine is called before the probe function is
called, and the driver internal are not initialized at that
time. This triggers a NULL pointer exception.
Fix it by moving poller registration after driver probe.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cherry-picked from U-Boot.
commit 69716c1900274a89bd5cbd1b0bb276ceaaa04f61
Author: Jason Kridner <jkridner@beagleboard.org>
Date: Wed Apr 20 08:54:16 2011 -0500
USB: Remove __attribute__ ((packed)) for struct ehci_hccr and ehci_hcor
Remove __attribute__ ((packed)) to prevent byte access to soc
registers in some gcc versions.
Having patches to enable ehci for the BeagleBoard lying around for
several months, this one was the show-stopper.
Switched to align(4), rather than remove the attribute, per suggestion
from Alexander.
Credits have to go to Laine Walker-Avina <lwalkera@ieee.org> for
finding the problem.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change dependencies in Kconfig for twl devices.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- bwPollTimeout is set to 10 ms, from the DFU spec, this
is the minimum time, in milliseconds, that the host should
wait before sending a subsequent DFU_GETSTATUS request.
Without this, I get 25 seconds value and dfu-util waits twice 25s
during download
- when in IDLE and receiving DETACH, first return 0 to make
dfu-util happy, then use a dfudetach variable to exit dfu
(without an USB reset as per the comment on line 425) and
return to runtime mode.
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- this patch sync fsl_udc.c with linux's driver,
- add a poller on usb_gadget_poll to get serial gadget working,
- return -EIO in usb_gadget_poll when udc is stopped (do detect
cable disonnection)
- tested on i.MX25 & i.MX35
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a general twl device driver twlcore to call i2c send/write
functions.
Abstract twl4030 to call twlcore functions.
Fixed some code-styling issues pointed out by checkpatch.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As PXA cpus suffer from a silicon bug which prevents them
from being compound devices, forbid use_acm=1 for PXAs.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is needed for the ohci-at91 to work.
In u-boot this function was transmitting a cmdlen of 12, by the initial
commit. There are similar functions like usb_request_sense,
usb_read_capacity nearby which also transmit 12 byte per default on
u-boot, which probably also need a fix.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As USB can have its cable plugged out anytime, make the
serial gadget reliable in case of unplugging :
- unregister the gadget_serial provided console
- don't stay forever in the read loop if connection was cut
This behaviour relies on correct implementation of
usb_gadget_poll(), which should return an error if the USB
cable was removed.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The serial gadget can only work if the serial function is
properly connected on USB trigger (ie. on SET_CONFIGURATION
or SET_INTERFACE USB message triggering set_alt() in
composite.c).
Make this connection and handle also the disconnection in
f_serial.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use the generic gadget polling function instead of the
specific fsl function. This is a fix from a leftover in
gadget development.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt mainline kernel pxa27x_udc driver to barebox :
- remove function header comments as they are in mainline
- test it with serial gadget
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Implemented an initial version of USB mass storage device driver,
supporting USB mass storage devices with SCSI interface and BBB
protocol. It implements the ATA interface and registers diskovered
LUNs with the disk driver.
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
and busnum start at 1
as this
Bus 001 Device 002: ID 0b95:7720 AX88772
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
pass the hccr and hcor register base via resource
instroduce add_generic_usb_echi_device with hccr = base + 0x100 and
hcor = base + 0x140
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This patch makes the USB command optional and makes usb_rescan a
global function. This way we can use USB in noninteractive
environments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes the compiler error:
CC drivers/usb/host/ehci-omap.o
drivers/usb/host/ehci-omap.c: In function 'ehci_omap_init':
drivers/usb/host/ehci-omap.c:204: error: 'CPU_ES2P1' undeclar
ed (first use in this function)
drivers/usb/host/ehci-omap.c:204: error: (Each undeclared ide
ntifier is reported only once
drivers/usb/host/ehci-omap.c:204: error: for each function it
appears in.)
make[3]: *** [drivers/usb/host/ehci-omap.o] Error 1
Problem reported by: Cory Walker (cwalker32@gmail.com)
Signed-off-by: Sanjeev Premi <premi@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this patch fix the following warning :
drivers/usb/gadget/fsl_udc.c: In function 'done':
drivers/usb/gadget/fsl_udc.c:566: warning: passing argument 1 of 'dma_inv_range' makes integer from pointer without a cast
arch/arm/include/asm/mmu.h:24: note: expected 'long unsigned int' but argument is of type 'void *'
drivers/usb/gadget/fsl_udc.c:566: warning: passing argument 2 of 'dma_inv_range' makes integer from pointer without a cast
arch/arm/include/asm/mmu.h:24: note: expected 'long unsigned int' but argument is of type 'void *'
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this patch fix the following error :
CC drivers/usb/gadget/epautoconf.o
drivers/usb/gadget/epautoconf.c:33: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'unsigned'
drivers/usb/gadget/epautoconf.c: In function 'ep_matches':
drivers/usb/gadget/epautoconf.c:168: error: 'epnum' undeclared (first use in this function)
drivers/usb/gadget/epautoconf.c:168: error: (Each undeclared identifier is reported only once
drivers/usb/gadget/epautoconf.c:168: error: for each function it appears in.)
drivers/usb/gadget/epautoconf.c: In function 'usb_ep_autoconfig_reset':
drivers/usb/gadget/epautoconf.c:304: error: 'epnum' undeclared (first use in this function)
Signed-off-by: Eric Bénard <eric@eukrea.com>
with cm-regbits-34xx.h and codebase from linux kernel
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
move to linux usb driver organisation
as following
drivers/usb/core
drivers/usb/gadget
drivers/usb/host
drivers/usb/otg
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Holger Schurig
Owen Kirby
Lucas Stach
Sascha Hauer
Alexander Shiyan
Alexander Aring
Jean-Christophe PLAGNIOL-VILLARD
Sebastian Hesselbarth
Lucas Stach
Eric Bénard
Robert Jarzmik
Steffen Trumtrar
Marc Kleine-Budde
Jan Luebbe
Marek Belisko
Jason Kridner
Alexander Aring
Michael Grzeschik
Robert Jarzmik
Juergen Beisert
Hubert Feurstein
Antony Pavlov
Rosen Kolev
Krzysztof Halasa
Sanjeev Premi