GPT need to be check before MBR
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
need it by upcoming EFI GPT support
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Recent GCC versions (e.g. GCC-4.7.2) perform optimizations based on
assumptions about the implementation of memset and similar functions.
The current ARM optimized memset code does not return the value of
its first argument, as is usually expected from standard implementations.
For instance in the following function:
void debug_mutex_lock_common(struct mutex *lock, struct mutex_waiter *waiter)
{
memset(waiter, MUTEX_DEBUG_INIT, sizeof(*waiter));
waiter->magic = waiter;
INIT_LIST_HEAD(&waiter->list);
}
compiled as:
800554d0 <debug_mutex_lock_common>:
800554d0: e92d4008 push {r3, lr}
800554d4: e1a00001 mov r0, r1
800554d8: e3a02010 mov r2, #16 ; 0x10
800554dc: e3a01011 mov r1, #17 ; 0x11
800554e0: eb04426e bl 80165ea0 <memset>
800554e4: e1a03000 mov r3, r0
800554e8: e583000c str r0, [r3, #12]
800554ec: e5830000 str r0, [r3]
800554f0: e5830004 str r0, [r3, #4]
800554f4: e8bd8008 pop {r3, pc}
GCC assumes memset returns the value of pointer 'waiter' in register r0; causing
register/memory corruptions.
This patch fixes the return value of the assembly version of memset.
Could you please review, or suggest better alternatives ?
Thanks,
--
Ivan
(this is a shorter and (hopefully) clearer repost of
http://lists.infradead.org/pipermail/linux-arm-kernel/2013-January/144916.html)
The patch adds a 'mov' instruction and merges an additional load+store into
existing load/store instructions.
For ease of review, here is a breakdown of the patch into 4 simple steps:
Step 1
======
Perform the following substitutions:
ip -> r8, then
r0 -> ip,
and insert 'mov ip, r0' as the first statement of the function.
At this point, we have a memset() implementation returning the proper result,
but corrupting r8 on some paths (the ones that were using ip).
Step 2
======
Make sure r8 is saved and restored when (! CALGN(1)+0) == 1:
save r8:
- str lr, [sp, #-4]!
+ stmfd sp!, {r8, lr}
and restore r8 on both exit paths:
- ldmeqfd sp!, {pc} @ Now <64 bytes to go.
+ ldmeqfd sp!, {r8, pc} @ Now <64 bytes to go.
(...)
tst r2, #16
stmneia ip!, {r1, r3, r8, lr}
- ldr lr, [sp], #4
+ ldmfd sp!, {r8, lr}
Step 3
======
Make sure r8 is saved and restored when (! CALGN(1)+0) == 0:
save r8:
- stmfd sp!, {r4-r7, lr}
+ stmfd sp!, {r4-r8, lr}
and restore r8 on both exit paths:
bgt 3b
- ldmeqfd sp!, {r4-r7, pc}
+ ldmeqfd sp!, {r4-r8, pc}
(...)
tst r2, #16
stmneia ip!, {r4-r7}
- ldmfd sp!, {r4-r7, lr}
+ ldmfd sp!, {r4-r8, lr}
Step 4
======
Rewrite register list "r4-r7, r8" as "r4-r8".
Signed-off-by: Ivan Djelic <ivan.djelic@parrot.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/arm/boards/phycard-a-l1/lowlevel.c: In function 'pcaal1_sdrc_init':
arch/arm/boards/phycard-a-l1/lowlevel.c:105:2: warning: implicit declaration of function 'get_ram_size' [-Wimplicit-function-declaration]
arch/arm/boards/phycard-a-l1/lowlevel.c:113:3: warning: implicit declaration of function 'hang' [-Wimplicit-function-declaration]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using IS_ENABLED instead of #if/#ifdef the compiler can check
all the code.
Using IS_ENABLED for configuring smc->mode is an optimization,
reduce init.o text from 905 to 877.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX21 has a imx1 gpio type. Change the name accordingly, otherwise
the gpio driver does not probe successfully.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX35 has a imx31 gpio type. Change the name accordingly, otherwise
the gpio driver does not probe successfully.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
__dev_printf is a define which uses a local variable 'ret'. This
means that whenever someone does a dev_*(dev, "ret: %d\n", ret);
ret will be 0.
Fix this by writing this without a local variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds USB gadget support to the i.MX chipidea driver. Basically
we have to add a register function to the fsl udc driver and call
this from the chipidea driver if device mode is selected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
CFI Flash is currently handled outside the mtd layer which makes it
a special case. Integrate it into mtd so that we get rid of this
special status.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
not enable as on qemu this generate a undefined instruction exception
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of dereferencing struct mtd_info members directly use
the wrapper functions which have an additional check if the
callback exists if it is optional, like mark_bad or is_bad.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel has mtd_read, mtd_write, mtd_erase and mtd_block_markbad.
Add these functions to barebox aswell to make future mtd synchronizations
with the kernel easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These are currently named mtd_read/write/erase. Functions with
the same name exist as global functions in the kernel. Rename
them to mtd_op_* to avoid name clashes with future mtd updates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel nowadays has mtd_read/write and other functions. In
barebox we also have these functions, but with a different prototype,
namely they correspond to the libmtd userspace functions. Rename
these functions to libmtd_* to avoid name clashes with future mtd
updates.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
HSIC needs some special setup for i.MX6. Most ugly detail is that
the HSIC needs help of the IOMUX to configure a pullup on the strobe
line. This has to be done after the ehci controller has started.
Fortunately there is only one muxing possibility for the HSIC ports
on i.MX6, so we can simply control the iomux from the usbmisc driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some controllers need an init hook after the USB controller is
started, so implement the post init hook for i.MX.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
calxeda use the generic driver but have it's own compatible cf Linux kernel
Documentation
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so when the first stage booloader of firmware provide the dtb
we can use it to probe the memory
also allow to print what we probe
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Having the board config file in /env/init has the problem that
the settings in /env/config are overwritten in the init sequence.
This moves the config-board files to /env/ and sources them explicitly
from /env/bin/init before sourcing /env/config
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
One memory initialization will be used on any CLPS711X-target,
so move it in the common location.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
NOR-flash is placed at address 0x0, so if MMU is turned on, initialization
will fails. This patch fix this problem.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
One lowlevel initialization will be used on any CLPS711X-target,
so move it in the common location.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a rework of CLPS711X low level initialization code which includes:
- Prepare for changing CPU PLL multiplier from board lowlevel code.
- Decrease initial memory size to 8MB. It is minimal known size.
- Fix SDRAM initialization comment about size.
- Turn off all peripherals on startup.
- Skip PLL initialization if CPU is running from external 13 MHz clock.
- Use correct CPU speed for older CPUs without PLL.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some Intel SSDs can send a COMINIT after the initial COMRESET. This causes
the link to go down and we need to re-initialize the link.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
device_platform_driver() - Helper macro for drivers that don't do
anything special in module registration. This eliminates a lot of
boilerplate. Driver registration will called on device_initcall.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The different console implementations share a good amount of code,
share this in console_common.c.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
at 0x10011000 for a9 legacy otherwise at 0x1c110000
as the new board also support Cortex-A9
so this is working
qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash -nographic -cpu cortex-a9
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use it on vexpress to detect the hardware mapping
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default setting for the imx28 watchdog is to do a power-off reset. If the
SoC is only powered via battery, then the watchdog powers the chip down, though.
According to the datasheet it should still be possible to execute a proper POR
with battery power, but testing showed otherwise.
When the watchdog power-off reset is disabled, a software reset is executed
instead. This works with and without battery power.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>