sysmo-bts
/
barebox
9
0
Fork 0
Code Releases Activity
1,730 Commits 8 Branches 0 Tags 47 MiB
Commit Graph

964 Commits

Author SHA1 Message Date
Wolfgang Denk 05d8dce9d0 Enable Quad UART om MCC200 board. 2006-03-23 17:10:30 +01:00
Wolfgang Denk 5725f94aac Cleanup MCC200 board configuration; omit non-existent stuff. 2006-03-21 01:58:07 +01:00
Markus Klotzbuecher 552fc624f2 Cleanup of the monahans cpu and delta board port. 2006-03-20 20:19:37 +01:00
Markus Klotzbuecher e443c944cf Support for redundant environment in NAND Flash. 2006-03-20 18:02:44 +01:00
Wolfgang Denk 0a112d8696 Merge with port of MPC8349EMDS board 2006-03-17 17:41:56 +01:00
Wolfgang Denk 09e4b0c5d3 Add support for Lite5200B board. 
Patch by  Patch by Jose Maria (Txema) Lopez, 16 Jan 2006
 2006-03-17 11:42:53 +01:00
Rafal Jaworowski dc9e499c62 Support for DDR with 32-data path. Addotional notes on injecting 
multiple-bit errors.
 2006-03-16 17:46:46 +01:00
Marian Balakowicz d326f4a242 Add command for handling DDR ECC registers on MPC8349EE MDS board. 2006-03-16 15:19:35 +01:00
Marian Balakowicz 97f98001a3 Fix DDR ECC bit definitions for MPC83xx. 2006-03-16 14:35:32 +01:00
Marian Balakowicz 991425fe05 Add initial support for MPC8349E MDS board. 2006-03-14 16:24:38 +01:00
Marian Balakowicz 61f25155ac Add DMA support for MPC83xx. 2006-03-14 16:14:48 +01:00
Marian Balakowicz e24e0f0744 Add bit definitions for MPC83xx DDR controller registers. 2006-03-14 16:03:46 +01:00
Marian Balakowicz cd94ba397e Add Dcbz(), Dcbi() and Dcbf() routines for MPC83xx. 2006-03-14 16:02:31 +01:00
Wolfgang Denk 84c960ce6d Add support for EmbeddedPlanet EP88x boards 
Patch by Yuli Barcohen, 13 Jul 2005
 2006-03-12 23:17:31 +01:00
Wolfgang Denk ca27381df1 Add (some) definitions for the MPC85xx local bus controller 
Patch by Murray Jensen, 08 Jul 2005
 2006-03-12 22:45:47 +01:00
Wolfgang Denk 8123eee875 Add CPM2 I/O pin functions for MPC85xx processors 
Patch by Murray Jensen, 08 Jul 2005
 2006-03-12 22:41:33 +01:00
Wolfgang Denk 47705af5da Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc8349ads 2006-03-12 21:49:19 +01:00
Wolfgang Denk 795bee8496 Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#mpc83xx 2006-03-12 21:33:52 +01:00
Wolfgang Denk 7b230f61db Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#pci 2006-03-12 21:31:38 +01:00
Wolfgang Denk a3f0169880 Merge with git://git.kernel.org/pub/scm/boot/u-boot/u-boot.git#ft_infr 2006-03-12 19:11:42 +01:00
Wolfgang Denk 0a3471fc78 Add netconsole and some more commands to RPXlite_DW board 
Patch by Sam Song, 19 Jun 2005
 2006-03-12 16:57:35 +01:00
Wolfgang Denk 993a22756e Fix bad declaration on pci_cfgfunc_nothing 
Patch by Sam Song, 19 Jun 2005
 2006-03-12 16:54:11 +01:00
Wolfgang Denk 953c5b6f8b Adjust "echo" as a default command 
Patch by Sam Song, 19 Jun 2005
 2006-03-12 16:51:59 +01:00
Wolfgang Denk 8e7b703a62 Coding Style cleanup 2006-03-12 02:55:22 +01:00
Wolfgang Denk 6cb142fa3b Add missing Blackfin files. 2006-03-12 02:12:27 +01:00
Wolfgang Denk 0afe519a43 Add ADI Blackfin support 
- add support for Analog Devices Blackfin BF533 CPU
- add support for the ADI BF533 Stamp uClinux board
- add support for the ADI BF533 EZKit board
Patches by Richard Klingler, June 11th 2005:
 2006-03-12 02:10:00 +01:00
Wolfgang Denk 8ff0208d31 Switch MPC86xADS and MPC885ADS boards to use cpuclk environment 
variable to set clock
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:55:43 +01:00
Wolfgang Denk f47b661141 RPXlite configuration fixes 
- Use correct flash sector size
- Use correct memory test end address
- Add support for bzip2 compression
- Various small fixes
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:48:55 +01:00
Wolfgang Denk aba9f1af60 Memory configuration changes for ZPC.1900 board 
- Fix SDRAM timing on both local bus and 60x bus
- Add support for second flash bank (SIMM)
- Change boot flash base
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:45:44 +01:00
Wolfgang Denk 5797b821dc Add support for Adder boards with 16MB SDRAM; 
add support for second FEC on Adder87x board.
Patch by Yuli Barcohen, 05 Jun 2005
 2006-03-12 01:43:03 +01:00
Wolfgang Denk 2281490485 Word alignment fixes for word aligned NS16550 UART 
Patch by Jean-Paul Saman, 01 Mar 2005
 2006-03-12 01:21:19 +01:00
Wolfgang Denk d52fb7e3d1 Some code cleanup for GCC 4.x 2006-03-11 22:53:33 +01:00
Markus Klotzbcher 8371a2c0d4 Enable simple (non-redundant) NAND environment on delta board. 2006-03-08 00:13:40 +01:00
Wolfgang Denk 0be248fa9a Cleanup (get rid of debug code that sneaked in) 2006-03-07 00:22:36 +01:00
Wolfgang Denk 951a954b77 Merge with /home/wd/git/u-boot/master 
Code cleanup.
 2006-03-06 23:18:48 +01:00
Markus Klotzbcher ac7d97dcbb Turned on SDRAM scrubbing. 2006-03-06 18:47:44 +01:00
Markus Klotzbcher 43638c674a Cleanup of NAND support of delta board using the Monahans Data Flash 
Controller.
 2006-03-06 15:04:25 +01:00
Markus Klotzbcher f9e029184b NAND finally working. Two bugs fixed: 
* For READ_STATUS and READID commands always 8 bytes need to be read from
   NDDB. Otherwise they stay there and get send to flash as the first data
   word when writing.

 * In nand_base.c the oob variable is not reset so this->oob_buf is
   overwritten what eventually screws up the bad block descriptor table.
 2006-03-06 13:45:42 +01:00
Wolfgang Denk bfc81252c0 Minor code cleanup 2006-03-06 13:03:37 +01:00
Wolfgang Denk 4e3ccd2692 Merge the new NAND code (testing-NAND brach); see doc/README.nand 
Rewrite of NAND code based on what is in 2.6.12 Linux kernel
Patch by Ladislav Michl, 29 Jun 2005

[Merge with /home/tur/nand/u-boot]
 2006-03-06 11:25:22 +01:00
Bartlomiej Sieka addb2e1650 Re-factoring the legacy NAND code (legacy NAND now only in board-specific 
code and in SoC code). Boards using the old way have CFG_NAND_LEGACY and
BOARDLIBS = drivers/nand_legacy/libnand_legacy.a added. Build breakage for
NETTA.ERR and NETTA_ISDN - will go away when the new NAND support is
implemented for these boards.
 2006-03-05 18:57:33 +01:00
Markus Klotzbcher bf7cac033b Lots of new stuff: 
* Debug message can be turned on and off.
 * Waiting for events now times out.
 * Implemented RESET command.
 * Added appropriate nand_bbt_descriptor and nand_oobinfo.

Remaining Problems:
 * Read Status still behaves weird an returns invalid stuff sometimes.
 * ECC Placement does not respect our scheme in nand_oobinfo.
 2006-03-04 18:35:51 +01:00
Wolfgang Denk aed9e2269c Merge with /home/sr/git/u-boot/cfi-flash-fix 2006-03-02 12:30:17 +01:00
Markus Klotzbcher 481911c78c Further NAND stuff implemented. Basic read commands seem to work. 2006-03-01 23:33:27 +01:00
Stefan Roese f18e874ad5 Fix problem with flash_get_size() from CFI driver update 
Patch by Stefan Roese, 1 Mar 2006
 2006-03-01 17:00:49 +01:00
Markus Klotzbcher 00c35bd214 Added GPIO initialization of DF signal. Still not working. 2006-02-28 22:51:01 +01:00
Wolfgang Denk 82f2e33a8d Update mcc200 config: Disable PCI and DoC, use 133 MHz IPB clock, 
use hush shell.
 2006-02-28 18:39:20 +01:00
Markus Klotzbcher 6949328d7d First steps implementing NAND support. Not working, fails to read ID. 2006-02-28 18:05:25 +01:00
Wolfgang Denk f6c0068fc1 Merge with Stefan Roese's branch with CFI driver fixes 2006-02-28 16:42:50 +01:00
Wolfgang Denk 36d2c5387d Merge with /home/wd/git/u-boot/master 2006-02-28 16:39:47 +01:00
Stefan Roese 58ad497833 Convert mcc200 to use common CFI flash driver 
Patch by Stefan Roese, 28 Feb 2006
 2006-02-28 15:33:28 +01:00
Stefan Roese 79b4cda076 Major CFI-FLASH driver update: 
* Add env-variable "unlock" to handle initial state of sectors
  (locked/unlocked).

  Only the U-Boot image and it's environment is protected,
  all other sectors are unprotected (unlocked) if flash
  hardware protection is used (CFG_FLASH_PROTECTION) and
  the environment variable "unlock" is set to "yes".

  Patch by Stefan Roese, 28 Feb 2006

* Update drivers/cfi_flash.c:
  - find_sector() called in both versions of flash_write_cfiword()
  Patch by Peter Pearse, 27th Feb 2006

* CFI support for a x8/x16 AMD/Spansion flash configured in x8 mode
  Patch by Jose Maria Lopez, 16 Jan 2006

* Add support for AMD/Spansion Flashes in flash_write_cfibuffer
  Patch by Alex Bastos and Thomas Schaefer, 2005-08-29

* Changes/fixes for drivers/cfi_flash.c:
  We *should* check if there are any error bits if the previous call
  returned ERR_OK (Otherwise we will have output an error message in
  flash_status_check() already.)  The original code would only check for
  error bits if flash_status_check() returns ERR_TIMEOUT.
  Patch by Marcus Hall, 23 Aug 2005

* Changes/fixes for drivers/cfi_flash.c:
  - Add CFG_FLASH_PROTECT_CLEAR on drivers/cfi_flash.c
  - Prohibit buffer write when buffer_size is 1 on drivers/cfi_flash.c
  Patch by Sangmoon Kim, 19 Aug 2005

* Fixes for drivers/cfi_flash.c:
  - Fix wrong timeout value usage in flash_status_check()
  - Round write_tout up when converting to msec in flash_get_size()
  - Remove clearing flash status at the end of flash_write_cfibuffer()
    which sets Intel 28F640J3 flash back to command mode on CSB472
  Patch by Tolunay Orkun, 02 July 2005
 2006-02-28 15:29:58 +01:00
Markus Klotzbcher 0377dca227 Merge /home/tur/nand/u-boot/ 
This is a first version of the testing-NAND branch merged back to main.
 2006-02-24 14:16:31 +01:00
Markus Klotzbcher 7d4d1ce48c Merge branch 'master' of http://www.denx.de/git/u-boot 2006-02-24 11:34:34 +01:00
Bartlomiej Sieka 038ccac511 Merge with /home/wd/git/u-boot/testing-NAND/ to add new NAND handling. 2006-02-24 09:37:22 +01:00
Markus Klotzbcher 599f52253a SDRAM now working. 2006-02-22 17:48:43 +01:00
Markus Klotzbcher ff3c2a9478 SDRAM now working for delta board, but there are still aliasing problems, 
we only see 64MB.
 2006-02-22 14:05:44 +01:00
Wolfgang Denk 6624b687bc Rename SMMACO4 board into smmaco4 for consistency with Linux. 2006-02-22 10:25:39 +01:00
Wolfgang Denk 5f0be01356 Disable CMD_BSP for SMMACO4 board. 2006-02-22 02:39:31 +01:00
Wolfgang Denk 9cdc838613 Merge with /home/hs/PanDacom/u-boot-dev 2006-02-22 01:59:13 +01:00
Wolfgang Denk 86ea5f93d7 Initial port to MCC200 board (work in progress) 
Minimally modified patch by Bluetechnix, Vienna
 2006-02-22 00:43:16 +01:00
Markus Klotzbcher 48b6242aa1 SDRAM seems to be working on delta board, though u-boot doesn't start yet. 2006-02-22 00:06:01 +01:00
Wolfgang Denk 881a87ecba Add GIT version information (commid ID) to untagged U-Boot versions 
As done in the linux kernel, the U-Boot version (U_BOOT_VERSION)
of all unreleased (untagged) U-Boot images will be automatically
extended upon compiletime with a part of the GIT commit ID and
possibly with "dirty" if uncommited changes are detected.

Here an example for the resulting version:
"U-Boot 1.1.4-g3457ac18-dirty"

The version is now maintained in the toplevel Makefile and the
version headers are autogenerated.

Patch by Stefan Roese, 9 Feb 2006
 2006-02-21 17:33:04 +01:00
Wolfgang Denk 654c2d2836 Merge with /home/sr/git/u-boot 2006-02-21 16:41:43 +01:00
Heiko Schocher 075866d840 [Patch] Add basic support for the SMMACO4 Board from PanDaCom. 
Signed-off-by: Heiko Schocher <hs@denx.de>
 2006-02-20 17:34:12 +01:00
Markus Klotzbcher 4f7a0e3671 New board directory and config for the benq delta board (copied from 
zylonite). Minor pxa-regs.h update.
 2006-02-20 16:37:37 +01:00
Markus Klotzbcher 8fb1857b40 Merged and added more pxa-regs.h stuff, especially the GPIO Control 
Register Definitions.
 2006-02-20 15:59:07 +01:00
Markus Klotzbcher 57dc57f14d Merged sufficient changes to pxa-regs.h in order to make u-boot compile. 
It doesn't run yet.
 2006-02-19 16:03:49 +01:00
Kumar Gala 2688e2f972 Enable address translation on MPC83xx 
Patch by Kumar Gala, 10 Feb 2006
 2006-02-10 15:40:06 -06:00
Markus Klotzbcher bf5988e533 Reverting pxa-regs.h back to original, because the intel Monahans one 
breaks backward compatibility and I don't trust it. Instead, i'll verify
and merge the parts I need while porting.
 2006-02-10 17:12:14 +01:00
Markus Klotzbcher 6ece03f267 Config updated for compiling the SMC911111 network driver 2006-02-10 17:08:26 +01:00
Markus Klotzbcher b2b43463af Changed gcc-4.0 global data pointer fix to conform with the fix for this on 
other platforms (see c75eba3b41)
 2006-02-10 11:25:41 +01:00
Markus Klotzbcher b3c36e6b94 basic u-boot is working, boots into the command shell. 2006-02-09 13:19:25 +01:00
Markus Klotzbcher 9d803d8c0b Changes: 
* lots of bugfixes in the assembler code
	* reverted hardware.h back to original
	* enabled hardware DRAM calibration
	* GCC-4 fix: modified GLOBAL_DATA_POINTER macro
 2006-02-08 18:56:28 +01:00
Stefan Roese 79830d591a Convert CPCI750 to use common CFI flash driver 
Patch by Reinhard Arlt, 8 Feb 2006
 2006-02-08 15:54:15 +01:00
Markus Klotzbcher af646e865f Forgot to add files to zylonite branch. 2006-02-07 20:48:45 +01:00
Markus Klotzbcher e0269579a5 This is the first commit for the u-boot zylonite port. The following has be 
done so far:

	* created zylonite board dir (based on lubbock)
	* extended some - but not all pxa sources and headers for Intel
	  Monahans support (CONFIG_CPU_MONAHANS)
	* created Makefile zylonite target + MAKEALL entry
	* added some debug nonsense, remove later, grep for mk@tbd

Status: compiles (eldk-4.0), and can be started with BDI, but runs forever
	and doesn't halt at breakpoints. Hmmm...
 2006-02-07 20:04:48 +01:00
Stefan Roese 48a05a5188 Various changes to esd HH405 board specific files 
Patch by Matthias Fuchs, 07 Feb 2006
 2006-02-07 16:51:04 +01:00
Wolfgang Denk 84e106c09d Update default environment for INKA4x00 board. 2006-02-07 15:18:25 +01:00
Zachary P. Landau 3a108ed868 Add support for r5200 board 2006-01-26 17:37:59 -05:00
Zachary P. Landau eacbd31775 Add support for Freescale M5271 processor 2006-01-26 17:35:56 -05:00
Kumar Gala b970480948 Fixed defines for MPC83xx SICRL register to match current specs 
Patch by Kumar Gala, 23 Jan 2006
 2006-01-23 16:22:57 -06:00
Stefan Roese a7b9fb9110 Add VGA support (CT69000) to CPCI750 board. 
Insert missing __le32_to_cpu() for filesize in ext2fs_read_file().

Patch by Reinhard Arlt, 30 Dec 2005
 2006-01-18 20:05:34 +01:00
Stefan Roese 2076d0a15f PMC405 and CPCI405: Moved configuration of pci resources into config file. 
PMC405 and CPCI2DP: Added firmware download and booting via pci.

Patch by Matthias Fuchs, 20 Dec 2005
 2006-01-18 20:03:15 +01:00
Wolfgang Denk c4b465f63e Fix 28F256J3A support on PM520 board 
(without bank-switching only 32 MB can be accessed)
 2006-01-13 17:00:56 +01:00
Kumar Gala 86902b8e36 Added PCI support for MPC8349ADS board 
Patch by Kumar Gala 11 Jan 2006
 2006-01-12 19:51:38 -06:00
Kumar Gala e559a6901a Add support for passing initrd information via flat device tree 
Patch by Kumar Gala 11 Jan 2006
 2006-01-11 16:41:35 -06:00
Kumar Gala 4e2531378f Allow board code to fixup the flat device tree before booting a 
kernel
Patch by Kumar Gala 11 Jan 2006
 2006-01-11 13:54:17 -06:00
Kumar Gala e4f880eddd Added CONFIG_ options for bd_t and env in flat dev tree 
CONFIG_OF_HAS_BD_T will put a copy of the bd_t
      into the resulting flat device tree.

      CONFIG_OF_HAS_UBOOT_ENV will copy the environment
      variables from u-boot into the flat device tree

Patch by Kumar Gala 11 Jan 2006
 2006-01-11 13:49:31 -06:00
Kumar Gala a179012e37 Added support for PCI prefetchable region and BARs 
If a host controller sets up a region as prefetchable and
a device's BAR denotes it as prefetchable, allocate the
BAR into the prefetch region.

If a BAR is prefetchable and no prefetchable region has
been setup by the controller we fall back to allocating
the BAR into the normally memory region.
Patch by Kumar Gala 11 Jan 2006
 2006-01-11 13:24:15 -06:00
Kumar Gala 9260a56151 Make System IO Config Registers board configurable on MPC83xx 
Patch by Kumar Gala, 11 Jan 2006
 2006-01-11 11:12:57 -06:00
Wolfgang Denk c7428d49ac Add support for 28F256J3A flah (=> 64 MB) on PM520 board 2005-12-29 15:12:09 +01:00
Wolfgang Denk 97c8d0bbbd Add support for 28F256J3A flash chips 2005-12-22 01:50:50 +01:00
Marian Balakowicz 3a7b142b62 Change port configuration for O2DNT (CODEC1 on PSC1) 2005-12-06 20:33:07 +01:00
Wolfgang Denk a889bd27ef Fix DPRAM offset/size for MPC8541/8555. 
Simplify TQM85xx Makefile handling.
 2005-12-06 15:02:31 +01:00
Wolfgang Denk f013dacf0a Code cleanup, especially MIPS for GCC 4.x 2005-12-04 00:40:34 +01:00
Wolfgang Denk 4a86d779ff Merge with /home/sr/git/u-boot 2005-12-01 01:38:13 +01:00
Wolfgang Denk b6f8435664 Adjust TQM834x PHY addresses for latest hardware revision. 2005-12-01 01:17:24 +01:00
Wolfgang Denk d00de23b15 Increase malloc arena on TQM5200 board to 256 kB. 
With 64 kb uniform flash sector size the old value of 128 kB was
too small.
 2005-12-01 00:55:19 +01:00
Marian Balakowicz d9785c14bf Fix miiphy global data initialization (problem on 4xx boards when no 
ethaddr is assigned). Initialization moved from miiphy_register() to
eth_initialize().

Based on initial patch for 4xx platform by Matthias Fuchs.
 2005-11-30 18:06:04 +01:00
Stefan Roese d96f41e016 Add support for TQM8541/8555 boards, TQM85xx support reworked: 
- Support for TQM8541/8555 boards added.
- Complete rework of TQM8540/8560 support.
- Common TQM85xx code now supports all current TQM85xx platforms
  (TQM8540/8541/8555/8560).
- DDR SDRAM size detection added.
- CAS latency default values can be overwritten by setting "serial#"
  to e.g. "ABC0001 casl=25" -> CAS latency 2.5 will be used.
  If problems are detected with this non default CAS latency,
  the defualt values will be used instead.
- FLASH size detection added.
- Moved FCC ethernet driver initialization behind TSEC driver init
  -> TSEC is first device.

Patch by Stefan Roese, 30 Nov 2005
 2005-11-30 13:06:40 +01:00
Stefan Roese 6e7fb6eaa5 Add support for AMCC 440SP, add support for AMCC Luan 440SP eval board. 
Patch by John Otken, 23 Nov 2005
 2005-11-29 18:18:21 +01:00
Marian Balakowicz 0a69b26ed6 Increase IPB and PCI clocks for O2DNT board. 2005-11-27 20:15:41 +01:00
Stefan Roese 3d9569b232 Changed PPC44x startup message (cpu info, speed...) to common style: 
On PPC44x platforms, the startup message generated in "cpu.c" only
comprised the ppc type and revision but not additional informations
like speed etc. Those speed infos where printed in the board specific
code. This new implementation now prints all CPU infos in the common
cpu specific code. No board specific code is needed anymore and
therefore removed from all current 44x implementations.

Patch by Stefan Roese, 27 Nov 2005
 2005-11-27 19:36:26 +01:00
Wolfgang Denk f08abe311b Remove unnnecessary #include <linux/types.h> from include/asm-*/u-boot.h 2005-11-25 16:38:03 +01:00
Stefan Roese 5568e613ee Add support for Prodrive P3P440 board: 
- Added onboard PPC440 DDR autodetection in cpu/ppc/sdram.c
- CFG_FLASH_QUIET_TEST added to use the common CFI driver
  for bank autodetection
Patch by Stefan Roese, 22 Nov 2005
 2005-11-22 13:20:42 +01:00
Wolfgang Denk fe126d8b34 Change all '$(...)' variable references into '${...}' 
which makes the environment compatible with the hush shell.
WARNING: Support for the old '$(...)' syntax will be
discontinued in a later version.
 2005-11-20 21:40:11 +01:00
Stefan Roese c7911c7e8f Merge with /server/home/stefan/git/u-boot/bamboo-sdram 2005-11-15 16:23:41 +01:00
Stefan Roese fd49bf0214 Fix Bamboo DDR SDRAM initialization (problem with onboard SDRAM) 
Patch by Stefan Roese, 15 Nov 2005
 2005-11-15 16:04:58 +01:00
Stefan Roese feaedfcf84 New PPC 405EP board added: CMS700 
Added CONFIG_NET_MULTI for VOM405 board.
Added reset_phy() for VOM405 board.
Patch by Matthias Fuchs, 09 Nov 2005
 2005-11-15 10:35:59 +01:00
Stefan Roese ea339205a9 Updated PCI mapping for esd CPCI2DP board. 
Add support for error LED.
Patch by Matthias Fuchs, 07 Nov 2005
 2005-11-08 09:00:09 +01:00
Stefan Roese 182e10691f Correct PPC Timebase register definitions (SPRN_TBRL...) 
Patch by Stefan Roese, 07 Nov 2005
 2005-11-07 09:57:57 +01:00
Wolfgang Denk 4d03a21f23 Adjust TQM85x PHY addresses for latest hardware revision. 2005-11-03 11:31:36 +01:00
Wolfgang Denk 8e9655f863 * Add hook to NAND erase and implement nand_wait function. 
Patch by Mike Rapoport, 01 Nov 2005

  Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
 2005-11-02 14:29:12 +01:00
Stefan Roese 57275b69c6 Add support for Ocotea pass 3 with 440GX Rev. F 
Patch by Stefan Roese, 01 Nov 2005
 2005-11-01 10:08:03 +01:00
Wolfgang Denk 5d4ee51061 Merge with /home/m8/git/u-boot 2005-10-29 23:45:04 +02:00
Marian Balakowicz 63ff004c4f Add support for multiple PHYs. 2005-10-28 22:30:33 +02:00
Wolfgang Denk 7b5cac0e19 Merge with /home/wd/git/u-boot/master 2005-10-21 22:41:25 +02:00
Stefan Roese 1e25f957c8 Add NetConsole Support for AMCC eval boards 
Patch by Stefan Roese, 20 Oct 2005
 2005-10-20 16:34:28 +02:00
Rafal Jaworowski 6902df56a0 Add PCI support for the TQM834x board. 2005-10-17 02:39:53 +02:00
Wolfgang Denk ea1fba136a Merge with /home/sr/git/u-boot 2005-10-17 00:19:16 +02:00
Wolfgang Denk 84bd92bdda Merge with /home/m8/git/u-boot 2005-10-15 18:23:43 +02:00
Stefan Roese 3b6748ea0d Add fat & ext2 support to AMCC 440EP boards Yosemite & Bamboo 
Patch by Stefan Roese, 14 Oct 2005
 2005-10-14 15:37:34 +02:00
Wolfgang Denk 77ddac9480 Cleanup for GCC-4.x 2005-10-13 16:45:02 +02:00
Wolfgang Denk 814d98f24e Add missing files for Pantelis Antoniou's patch 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:59:29 +02:00
Wolfgang Denk cbdf8824fa Merge with /home/sr/git/u-boot 2005-10-13 01:55:58 +02:00
Wolfgang Denk 070610c529 Add support for OF flat tree for the STXtc board. 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:49:09 +02:00
Wolfgang Denk f57f70aab9 Support passing of OF flat trees to the kernel. 
Patch by Pantelis Antoniou, 04 Sep 2005
 2005-10-13 01:45:54 +02:00
Marian Balakowicz 36247821ef Fix TQM834x config file, set correct value for CFG_IMMRBAR. 2005-10-12 12:45:04 +02:00
Marian Balakowicz e6f2e90233 Added support for TQM834x boards. 2005-10-11 19:09:42 +02:00
Wolfgang Denk 3df5bea0b0 Add support for NetSilicon NS7520 processor. 
Patch by Art Shipkowski, 12 May 2005

Cleanup.
 2005-10-09 01:41:48 +02:00
Wolfgang Denk 7521af1c7d Add support for AP1000 board. 
Patch by James MacAulay, 07 Oct 2005
 2005-10-09 01:04:33 +02:00
Stefan Roese c29ab9d71d Fix gzip bmp support (test if malloc fails, warning when truncated). 
Increase CFG_VIDEO_LOGO_MAX_SIZE on HH405 board.
Patch by Stefan Roese, 08 Oct 2005
 2005-10-08 10:19:07 +02:00
Wolfgang Denk b8e16a3450 Cleanup 2005-10-06 23:44:55 +02:00
Wolfgang Denk 87cb6862b9 Update make target for ARM supported boards. 
Use lowlevel_init() instead of platformsetup() [rename].
Patch by Peter Pearse, 06 Oct 2005
 2005-10-06 17:08:18 +02:00
Wolfgang Denk 6ebc792114 Add JFFS2 support for TRAB board 
Patch by Martin Krause, 25 Aug 2005
 2005-10-06 01:46:57 +02:00
Wolfgang Denk f5c254d719 Fix the machine-id of the Cogent csb637 board 
Patch by Anders Larsen, 05 Oct 2005
 2005-10-06 01:26:16 +02:00
Wolfgang Denk 78da60773c Complete support for the KwikByte KB920x boards 
Patch by Anders Larsen, 05 Oct 2005
 2005-10-06 01:22:22 +02:00
Wolfgang Denk 645da51097 Add support for Cogent csb637 
Patch by Anders Larsen, 29 Apr 2005
 2005-10-05 02:00:09 +02:00
Wolfgang Denk 080bdb7f3a * Move dm9161.c and lxt972.c into cpu/arm920t/at91rm9200 
Patch by Anders Larsen, 29 Apr 2005

* Fix problems introduced by Patch by Steven Scholz, 02 Mar 2005
  (8e2be51de8)
 2005-10-05 01:51:29 +02:00
Wolfgang Denk 29ca46c445 Fix device partition intialization for SystemACE disks. 
Patch by Stephen Williams, 28 Apr 2005
 2005-10-05 00:25:17 +02:00
Wolfgang Denk 99b0d2851a Added support for KwikByte KB920x boards (based on AT91RM9200) 
Patch by Matt ?? <kb9200_dev@kwikbyte.com>, 27 Apr 2005
 2005-10-05 00:19:34 +02:00
Wolfgang Denk 45237bc00b Add support for S29GL064M-R3 flash chip on xsengine board 
Patch by Kurt Stremerch, 18 Apr 2005
 2005-10-05 00:03:55 +02:00
Wolfgang Denk 9b880bd4d8 Update ARM Integrator boards: 
Correct addessing errors in platform files.
Split off common core module data from Integrator header files to
include/armcoremodule.h.
Patch by Peter Pearse, 04 Oct 2005
 2005-10-04 23:10:28 +02:00
Stefan Roese 9a8d82fd3c Fix 440GR to print correct cpu revision 
Patch by Stefan Roese, 4 Oct 2005
 2005-10-04 15:00:30 +02:00
Stefan Roese 2c7b2ab5a0 Fix problem with SM501 init on HH405 board. 
Patch by Stefan Roese, 30 Sep 2005
 2005-09-30 16:41:12 +02:00
Wolfgang Denk 709d8ec0d8 Fix FEC PHY addresses for TQM85xx boards 2005-09-29 12:16:38 +02:00
Wolfgang Denk fb34a9a201 Undo change of f6e20fc6ca... to include/configs/trab.h 
(Must have been an accident?)
 2005-09-26 23:40:37 +02:00
Wolfgang Denk d8e7e0f044 Add support for AT91RM9200 OHCI Controller. 
Patch by Eric Benard, 07 Apr 2005
 2005-09-26 01:26:56 +02:00
Wolfgang Denk 98404649c8 Update ARM mach-types.h 
Patch by Eric Benard, 07 Apr 2005
 2005-09-26 01:18:22 +02:00
Wolfgang Denk 0e4018d244 Add support for MP2USB board. 
Patch by Eric Benard, 07 Apr 2005
 2005-09-26 01:14:38 +02:00
Wolfgang Denk c570b2fdf5 Add board support for armadillo HT1070 
Patch by Rowel Atienza, 06 Apr 2005
 2005-09-26 01:06:33 +02:00
Wolfgang Denk c2d0ab4da8 Second Ethernet address enabled for MPC885ADS and MPC8272ADS. 
Patch by Vitaly Bordug, 30 Mar 2005
 2005-09-26 00:53:02 +02:00
Wolfgang Denk e6f222815c Add iopset command on mpc8xx 
Patch by Daniel Eisenhut, 25 Mar 2005
 2005-09-26 00:44:15 +02:00
Wolfgang Denk f2af3eb55e Fixes to the Lubbock (PXA 25x) support: 
- Resolve the FIXME with respect to saving the u-boot environment.
- Make the default load address land in real memory.
- Fix lan91c96 SMC_{in,out}{b,w,l}() macros
Patch by David Brownell, 10 Mar 2005
 2005-09-26 00:29:53 +02:00
Wolfgang Denk 8e6f1a8ec2 Add Barco Streaming Video Card (SVC) and Sample Compress Network (SCN) board 
Patch by Marc Leeman, 04 Mar 2005
 2005-09-25 18:59:36 +02:00
Wolfgang Denk 716c1dcb41 Cleanup 2005-09-25 18:49:35 +02:00
Wolfgang Denk 49a7581c6c OMAP242x H4 board update 
- fix for ES2 differences.
- switch to using the cfi_flash driver.
- fix SRAM build address.
- fix for GP device operation.
- unlock SRAM for GP devices.
- display more device information.
- fix potential deadlock in omap24xx_i2c driver.
- fix DLL load values to match dpllout*1 operation.
- fix 2nd chip select init for combo DDR device.
- add support for CFI Intel 28F256L18 on H4 board.
Patch by Richard Woodruff, 03 Mar 2005
 2005-09-25 18:41:04 +02:00
Wolfgang Denk 8e2be51de8 Fix formating in include/asm-arm/arch-at91rm9200/AT91RM9200.h 
Patch by Steven Scholz, 02 Mar 2005
 2005-09-25 17:14:20 +02:00
Wolfgang Denk b66eb5282d Add cramfs support for m68k 
Patch by Zachary Landau, 21 Feb 2005
 2005-09-25 16:59:36 +02:00
Wolfgang Denk bd51626c8d Update ep8260: Fix flash timeouts; improve clock resolution for faster UARTs 
Patch by Jeff Angielski, 21 Feb 2005
 2005-09-25 16:56:15 +02:00
Wolfgang Denk 875c78934e Add Xilinx Spartan3 family FPGA support 
Patch by Kurt Stremerch, 14 February 2005
 2005-09-25 16:44:21 +02:00
Wolfgang Denk 1972dc0a9e Added support for PCI bridge on MPC8272ADS 
Patch by Vitaly Bordug, Feb 09 2005
 2005-09-25 16:27:55 +02:00
Wolfgang Denk 0148e8cb43 Update multicore CM9XX support for Integrator AP to allow booting from flash 
Patch by Jean-Paul Saman, 8 Feb 2005
 2005-09-25 16:22:14 +02:00
Wolfgang Denk 6ed6ce62be Fix typos in include/ppc440.h 
Patch by Andrew E Mileski, 04 Feb 2005
 2005-09-25 16:01:42 +02:00
Wolfgang Denk 70a2047ff6 Add Vibren (was Accelent) PXA255 IDP Support 
Patch by Cliff Brake, 04 Feb 2005
 2005-09-25 15:59:01 +02:00
Wolfgang Denk fe7eb5d88b Cleanup 2005-09-25 02:00:47 +02:00
Wolfgang Denk 74f4304ee7 Add ARM946E cpu and core module targets; remap memory to 0x00000000 
Patch by Peter Pearse, 2 Feb 2005
 2005-09-25 01:48:28 +02:00
Wolfgang Denk c97a2aaf27 OMAP242x fix for GP device booting 
- Add SRAM unlock for GP devices.
- Change DDR DLL unlock value to allow DPLLout*1 operation.
Patches by Richard Woodruff, 21 Jan 2005:
 2005-09-25 00:59:24 +02:00
Wolfgang Denk 265817c7e6 Add support for AMD's Pb1x00 eval board; 
add MII routines to the au1x00 ethernet driver;
add USB ohci driver (work in progress)
Patch by Thomas Sailer, 20 Jan 2005
 2005-09-25 00:53:22 +02:00
Wolfgang Denk 2b792afcc5 * Fix PHY address argument passing with mii info command 
Patch by Andrew Dyer, 28 Dec 2004

* Cleanup: fix broken builds
 2005-09-24 21:54:50 +02:00
Wolfgang Denk 0c8721a466 Cleanup (PPC4xx is AMCC now) 2005-09-23 11:05:55 +02:00
Wolfgang Denk 1caa70788c Cleanup - update CHANGELOG, undo test settings 2005-09-22 09:34:17 +02:00
Stefan Roese 7644f16f6b esd CPCI2DP board added 
Patch by Matthias Fuchs, 22 Sep 2005
 2005-09-22 09:16:57 +02:00
Stefan Roese 026cb5d864 esd PMC405 board updated 
Patch by Matthias Fuchs, 22 Sep 2005
 2005-09-22 09:07:15 +02:00
Stefan Roese 98f4a3dfcb Add SM501 support to HH405 board. 
Add support for gzip compressed bmp's (CONFIG_VIDEO_BMP_GZIP).
Add support for eeprom write-enable (CFG_EEPROM_WREN).
Patch by Stefan Roese, 22 Sep 2005
 2005-09-22 09:04:17 +02:00
Stefan Roese 5810dc3a2e Fix autonegotiation in tsec ethernet driver 
Patch by Stefan Roese, 21 Sep 2005
 2005-09-21 18:20:22 +02:00
Wolfgang Denk 1806c75959 Update configuration for INKA4x0 board 2005-09-21 10:07:56 +02:00
Wolfgang Denk 29fe1c0fa4 Update configuration for PM854 board 
Based on patch by R. Loeffl, 20 Jul 2005
 2005-09-21 09:59:55 +02:00
Stefan Roese 053b40fa0c Add PCI support to TQM8540 and TQM8560 boards 
Patch by Stefan Roese, 15 Sep 2005
 2005-09-15 14:41:11 +02:00
Stefan Roese 34c0a5e98b Update AMCC Yosemite to get a consistent setup for all AMCC eval 
boards (baudrate, environment...). Flash driver fixed.
Patch by Stefan Roese, 15 Sep 2005
 2005-09-15 11:34:07 +02:00
Wolfgang Denk ac7eb8a315 Update of new NAND code 
Patch by Ladislav Michl, 13 Sep 2005
 2005-09-14 23:53:32 +02:00
Wolfgang Denk 3edb0ccf61 Merge with /home/wd/git/u-boot/master 2005-09-14 17:06:43 +02:00
Wolfgang Denk 47278471f9 Merge with /home/sr/git/u-boot 2005-09-14 16:59:18 +02:00
Wolfgang Denk 670d9f132d Change default console baud rate for stxxtc board 2005-09-13 00:12:33 +02:00
Stefan Roese 4a3cd9e655 Fix problem in 440GP ethernet driver (ebony). Add support for 2nd 
ethernet port on ebony.
Patch by Stefan Roese, 7 Sep 2005
 2005-09-07 16:21:12 +02:00
Wolfgang Denk 5d244ea128 Merge with /home/sr/git/u-boot: 
Add I2C support for TQM85xx
 2005-09-06 22:17:16 +02:00
Wolfgang Denk 80e238c7f0 Fix default command set (don't include CFG_CMD_DISPLAY command) 
Patch by Pantelis Antoniou, 02 Sep 2005
 2005-09-03 02:22:41 +02:00
Wolfgang Denk ccd9d3d60c Enable SM712 driver support for HMI1001 board. 2005-09-03 01:21:50 +02:00
Stefan Roese 9d2a873bdf Add I2C support to TQM8540 and TQM8560 boards (EEPROM, RTC, LM75-DTT). 
Removed CFG_CMD_DISPLAY from default commands.
Fixed compiler warning in net.c.
Patch by Stefan Roese, 31 Aug 2005
 2005-08-31 12:55:50 +02:00
Wolfgang Denk f7fbf269fe Adjust CS3 timings on HMI1001 board for dot matrix display under Linux 2005-08-30 13:43:18 +02:00
Wolfgang Denk 9f96ae44c6 Add keyboard and dot matrix display support for HMI1001 board. 2005-08-30 13:04:12 +02:00
Wolfgang Denk ec2e5a2cce Merge with testing-4xx_enet (Create generic 4xx Ethernet code) 2005-08-23 23:03:20 +02:00
Wolfgang Denk d534f5cc38 Add JFFS2 support for TQM5200 board 2005-08-23 22:27:41 +02:00
Stefan Roese 5e4b3361bc Add esd cpci5200 and pf5200 boards 
Patch by Reinhard Arlt, 22 Aug 2005
 2005-08-22 17:51:53 +02:00
Wolfgang Denk 94085698d0 Fix sysclock for TQM8540 and TQM8560 boards 
Patch by Martin Krause, 25 Jul 2005
 2005-08-19 00:55:12 +02:00
Wolfgang Denk 6617aae9b9 Add new board specific commands for TQM5200/STK52XX 
- Sound commands (beep, wav, sound)
- Test commands (led, can, backlight, rs232)
Patch by Martin Krause, 02 May 2005
 2005-08-19 00:46:54 +02:00
Wolfgang Denk df3c7c8f52 Change main clock on CMC-PU2 board from 207 MHz to 179 MHz 
because of a bug in the AT91RM9200 CPU PLL
Patch by Martin Krause, 22 Apr 2005
 2005-08-19 00:36:45 +02:00
Wolfgang Denk dbc5819098 Remove CONFIG_AT91RM9200DK in CMC-PU2 configuration 
Patch by Martin Krause, 19 Apr 2005
 2005-08-18 12:21:16 +02:00
Wolfgang Denk 4f562f145a Add RTC support for STK52XX.200 
Patch by Martin Krause, 7 Apr. 2005
 2005-08-18 11:51:12 +02:00