i2c is needed to enable voltage rails that are later
needed by other drivers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Looking at the linux kernel the clock-frequency property of
the device tree is used to set the bus speed and not the
fclk_rate. Adapted this to be compliant with linux kernel.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the i2c-at91 driver won't work in the interrupt mode,
so need to poll the interrupts.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This driver is also used for Allwinner SoCs I2C controllers.
Ported from linux-3.15.
The most notable barebox driver version changes:
* drop platform device stuff;
* drop "allwinner,sun*" stuff;
* drop message offloading support;
* add reg-io-width devicetree parameter to use driver
with byte-oriented controller versions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
On Armada XP:
Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch imports i2c_smbus_{read,write}* functions from linux-3.15.
Here is a quote from linux.git/Documentation/i2c/smbus-protocol:
If you write a driver for some I2C device, please try to use the SMBus
commands if at all possible (if the device uses only that subset of the
I2C protocol). This makes it possible to use the device driver on both
SMBus adapters and I2C adapters (the SMBus command set is automatically
translated to I2C on I2C adapters, but plain I2C commands can not be
handled at all on most pure SMBus adapters).
So having i2c_smbus_{read,write}* functions in barebox makes
porting of linux i2c client drivers much easier as many drivers rely on
these smbus functions.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/i2c/i2c.c:246:19: warning: symbol 'i2c_new_device' was not declared. Should it be static?
drivers/i2c/i2c.c:274:6: warning: symbol 'of_i2c_register_devices' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i2c/spi devices in the devicetree often come with a "vendor,device"
comaptible string. These do not match in barebox, so add a
device_match_of_modalias function which does exactly that.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A printf in the driver should be dev_* and contain useful information.
Both is not the case, remove it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver didn't work well with at24 driver. NACKS are lost.
Errors are lost in isr due to the local variable err. Also we didn't wait for
bus free in omap_i2c_xfer_msg.
Fix issues and get other improvements from linux kernel
Tested on OMAP4 and AM335x
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit f64ed12b accidentally swap fclk_rate from am33xx and omap3.
Revert this change.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to use device_ids and make code a bit smaller.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the call of the cpu_is_* functions completely
and uses id_tables instead.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added device register functions and cpu_is_am33xx()
function.
Adapted the i2c-omap driver. AM335x has a lower
clock rate and the timeout of polling the isr function
had to be increased.
Based on a patch from Shravan Kumar <shravan.k@phytec.in>.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cpu_is_omap2430() is set when CONFIG_ARCH_OMAP is enabled.
This fits for all OMAP/AM33xx boards supported in barebox.
Cleaned up all conditions that use the cpu_is_omap2430().
Also removed some unused defines.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove device_node_for_nach_child and convert users to corresponding
imported OF API functions.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dev_add_child is a very unsafe function. If called multiple times
it allows setting the same device to different parents thus corrupting
the siblings list. This happens regularly since:
| commit c2e568d19c
| Author: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
| Date: Sat Nov 3 16:11:05 2012 +0100
|
| bus: add bus device
|
| automatically add it as parent of any bus device if none already specified
|
| we have now a nice output per bus
If for example a FATfs is mounted this nice output per bus often ends with:
> `---- fat0
> `---- 0
> `---- 0x86f0000087020031-0x86f000410df27124: /dev/<NULL>
> `---- sram00
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> `---- 0x00000000-0xffffffffffffffff: /dev/<NULL>
> unable to handle NULL pointer dereference at address 0x0000000c
> pc : [<87f08a20>] lr : [<87f08a04>]
> sp : 86eff8c0 ip : 87f3fbde fp : ffffffff
> r10: ffffffff r9 : 00000000 r8 : 00000003
> r7 : 86f075b8 r6 : 00000002 r5 : ffffffec r4 : 86f07544
> r3 : 00000000 r2 : 43f900b4 r1 : 00000020 r0 : 00000005
> Flags: Nzcv IRQs off FIQs off Mode SVC_32
> [<87f08a20>] (do_devinfo_subtree+0x90/0x130) from [<87f08a90>] (do_devinfo_subtree+0x100/0x130)
>
> [<87f3e070>] (unwind_backtrace+0x0/0x90) from [<87f28514>] (panic+0x28/0x3c)
> [<87f28514>] (panic+0x28/0x3c) from [<87f3e4b8>] (do_exception+0x10/0x14)
> [<87f3e4b8>] (do_exception+0x10/0x14) from [<87f3e544>] (do_data_abort+0x2c/0x38)
> [<87f3e544>] (do_data_abort+0x2c/0x38) from [<87f3e268>] (data_abort+0x48/0x60)
This patch fixes this by adding a device to its parents children list in
register_device so that dev_add_child is no longer needed. This function
is removed from the tree. Now callers of register_device have to clearly
set the parent *before* registering a device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: Jan Lübbe <jlu@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will be use by at24 driver
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This returns an I2C client bound to the "dummy" driver, intended for use
with devices that consume multiple addresses. Examples of such chips
include various EEPROMS (like 24c04 and 24c08 models).
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is need for sequential read/write.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>