This adds functions to bring up the new style
Tegra114+ PLL_E.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes a power domain didn't properly power up,
reading back the command register seems to fix this
by flushing the write.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The processing of the buffer might change some data, which
will eventually trigger a cache writeback later on, corrupting
data written by the network chip. Clean the cache range
to make sure there is no writeback pending.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we have working network support on the Beaver board
it makes sense to enable some network options.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the driver for RealTek 8169 and compatible
pci attached network chips.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to use some devices we first have to power
up their power domain. Add support to do this in a
generic way.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i2c is needed to enable voltage rails that are later
needed by other drivers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This way we also list devices that are behind
bridges.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So that PCI devices hang down from bridges and root
bridges down from the PCI host controller when
calling devinfo.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise the drivers for a device may probe before the
devices parent bridge is fully configured, which leads
to errors when accessing the BARs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some host controllers provide a prefetchable
memory area and devices will prefer this for
some of their BARs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without console support we need a static inline version of
pr_print and dev_printf, otherwise we get link errors.
Reported-by: Kevin Du Huanpeng <u74147@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwhise we get this error message:
commands/built-in.o: In function `do_usbgadget':
barebox-2014.10.0/commands/usbgadget.c:77: undefined reference to `file_list_parse'
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a mvebu_defconfig which enables all mvebu based boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>