imx_iim_read is a iim internal function, so access the
internal functions rather than using the cdev API.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With devicetree devicenames start with numbers. Parameters on these
devices are not accessible since variables can't start with numbers.
Register a logical 'iim' device which makes the permanent_write_enable
and explicit_sense_enable parameters accessible again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of duplicating data shared between the banks in a bank
specific struct, use a iim struct and a bank struct.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gcc 4.8.3 throws the following error
include/mfd/syscon.h: In function 'syscon_base_lookup_by_pdevname':
include/mfd/syscon.h:22:1: error: parameter name omitted
static inline void __iomem *syscon_base_lookup_by_pdevname(const char *)
Fix it by adding the name to the function prototype.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The static inline wrapper for am33xx_bbu_spi_nor_mlo_register_handler
lacked the 'static inline'. add it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
hostname_init() must be called after the devicetree root node has been
initialized, otherwise the check on board compatible always returns
false.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With CONFIG_PARTITION_NEED_MTD enabled we use mtd rather than devfs
directly to create partitions on mtd devices. Since:
| commit b32cd8df87
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Wed Apr 9 15:49:32 2014 +0200
|
| mtd: nand: bb: use mtd api directly
|
| The devfs layer just adds an addition indirection between mtd
| and the bb devices with no purpose. Drop it.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bad block aware device creation doesn't work if this option
is disabled. With this we remove CONFIG_PARTITION_NEED_MTD and always
use mtd partitions on mtd devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When iterating over directories in order to find boot scripts do
this alphabetically to get a predictable order. This can be done
with glob() rather than readdir().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When there are multiple bootsources barebox should try booting them
until one succeeds. This is broken because we bail out of the iteration
loop with a goto. Remove the goto to fix this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some of the barebox specific changes that were added in commit
e0316b4dd7 got lost during the switch to use
upstream dtsi files in commit bb7cf71cff.
Especially the memory size is important since we have two different memory
sizes which have to be handled.
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From 3cd970250ff17ac406e46e18ebb26aa35949d1db Mon Sep 17 00:00:00 2001
From: Owen Kirby <osk@exegin.com>
Date: Thu, 8 May 2014 13:27:11 -0700
Subject: [PATCH] Fix the options and protocols used by the loadx command.
It seems like the loadx command was improperly copy/pasted from the loady
implementation, and was trying to load files using the ymodem protocol. This
patch should fix the command so that it uses xmodem, implements the -t option
and outputs the correct baudrate being used.
Signed-off-by: Owen Kirby <osk@exegin.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This isn't much different from the default 1,16V
and I haven't seen this make a difference on any
board, but it seems to be required for some T30 SKUs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's not safe to ramp up the CPU clock speed to
1,4 GHz on all T30 SKUs, as this may result in failure
to start the kernel properly. Start CPU at 600 MHz,
which is safe even for the slowest SKUs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This board wasn't changed properly, as it was merged in the short
timeframe where the signature change waited to be applied. Change
it now to get rid of the compiler warning.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We use 'u32' type in stdlib.h so we have to include types.h.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For small systems we would put the zImage at 32KiB after
the start of memory, and put the DT a bit after the uImage.
The kernel will always try to relocate itself and overwrite
the DT.
Try to be more clever at uImage placement to avoid
triggering the kernel relocation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For small systems we would put the zImage at 8MiB after
the start of memory, and put the DT a bit after the zImage.
When we encounter an image which is bigger than 8MiB
uncompressed, the kernel would try to relocate itself
and overwrite the DT.
Try to be more clever at zImage placement to avoid
triggering the kernel relocation.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If we have two discontinuous memory banks we want to move
the malloc area into the upper bank by default to leave as
much free space in the lower bank, where we have to place
kernel, oftree and initrd.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Not needed anymore, as barebox now accepts FDTs outside
of it's visible DRAM, as long as it's a valid pointer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Not needed anymore, as barebox now accepts FDTs outside
of it's visible DRAM, as long as it's a valid pointer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Not needed anymore, as barebox now accepts FDTs outside
of it's visible DRAM, as long as it's a valid pointer.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mostly to make it clear that boarddata needs to be
something we can dereference.
As this is a pretty invasive change, use the opportunity
to make the signature 64bit safe.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Steffen Trumtrar
Beniamino Galvani
Franck Jullien
Christoph Fritz
Michael Olbrich
Owen Kirby
Silvio Fricke
Lucas Stach
Antony Pavlov
Lucas Stach