The main idea behind this patch is to avoid redundant board code.
Because of the module similarities of all am335x based phytec boards, we can
merge its code.
The phytec-som-am335x merges the code of all am335x based phytec SOMs.
So we will have only one "board" in the barebox for phyCORE, phyFLEX.
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support phyFLEX-i.MX6 SOM with 1GB on one ram bank
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the imx28evk to multiimage support and adds the
lowlevel initialization to make the bootlets unnecessary.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Enable multi-image support to generate bootstream, sd-card and 2nd stage
images.
- Handle pin-mux in lowlevel.c only.
- Use fine-tuned memory setup from u-boot.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- enable multiimage support to generate bootstream, sd-card and 2nd
stage images
- Enable new defaultenv support
- Enable more features
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Freescale MXS SoCs have a multi staged boot process which needs
different images composed out of different binaries. The ROM executes
a so called bootstream which contains multiple executables. The first
one is executed in SRAM and the purpose of this binary is to setup
the internal PMIC and the SDRAM. The second image is usually the
bootloader itself. In case of barebox the bootstream is composed
out of the self extracting barebox image (pblx) and the prepare
stage for setting up the SDRAM.
The bootstream image itself is useful for USB boot, but for booting from
SD cards or NAND a BCB header has to be prepended to the image. In case
of SD boot the image has the .mxssd file extension in barebox.
Since the bootstream images are encrypted they are not suitable for
2nd stage execution. For this purpose the 2nd stage images are generated.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Freescale i.MX6sx sabresdb board.
Tested are:
- UART
- The three SD card slots
- USB host
- USB otg (host and device mode)
- FEC (both)
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyBOARD-SUBRA which use a phyFLEX-i.MX6 (pfla02) module.
- i.MX6 SOLO with 512MB RAM
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for phyBOARD-ALCOR which use a phyFLEX-i.MX6 (pfla02) module.
- i.MX6 Quad with 1GB RAM on two banks
Signed-off-by: Christian Hemp <c.hemp@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds xz decompression support from the kernel. Both compressing
the barebox binary with xz and decompressing xz files on the commandline
is supported.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Boards like phyBOARD-WEGA RDK have an phyCORE-AM335x
connected with no SPI NOR flash. Added dts to support this.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nitrogen6x have variants with 2GB SDRAM. Add support for them. The
imxcfg files are from U-Boot.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Karo TX6X family consists of different i.MX6Q/DL based System-on-Modules.
Add support for the TX6u 801x modules, that have an i.MX6DL SoC.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For now only the Quad 1GB variant is supported.
Tested:
- starting barebox over USB
- writing barebox to NAND with barebox_update
- starting Linux kernel over TFTP
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes various stability issues seen on new boards
with the old setup.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds a new Marvell Kirkwood-based board, by following the currently
supported boards.
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for 256MB and 128MB RAM configurations of the
phyCORE-AM335x. This is done as new images.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will add support for Embedsky E9 board.
It is a small board based on i.MX6 Quad with 2G of RAM.
http://en.embedsky.com/product_info.php?cateid=169&id=169
Signed-off-by: Andrey Panov <rockford@yandex.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The rule in barebox is to name the directories after
the modules. As hummingboard is just one of the
carriers for the MicroSOM module, name the directory
accordingly.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This converts Marvell Armada XP based PlatHome Openblocks AX3-4
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This converts Marvell Armada XP based Marvell Armada XP GP
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This converts Marvell Armada 370 based Globalscale Mirabox
to PBL_MULTI_IMAGES. A DT overlay is added to keep possible
barebox-specific changes separated and added to lowlevel
board init.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
This reorders images/Makefile.mvebu targets by board to ease integration
of new boards.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Allows to build persistent images for the Tegra124
line of SoCs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To make it clear that this image is only suitable
for loading via usbloader. We can't do anything
about this, as there is no upstream BCT available
for AC100.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Six images for the the 256MB and 512MB version with
different boot sources (MMC, NAND [different chips on
pre-/production modules]).
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to build persistent images for the Tegra30
line of SoCs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to build persistent images for the Tegra20
line of SoCs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
