This commit adds support for most spi eeproms, such as the
Atmel at25 models.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds the following spi transfer functions:
- spi_write
- spi_read
- spi_write_then_read
- spi_w8r8
The code has been ported from the linux kernel.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the spi layer this pointer will be assigned to the
platform_data pointer of the new spi device, thus it can
be accessed in the drivers 'probe' handler.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MLO is to big (>40000) to save Space disable CONFIG_FS_RAMFS and
CONFIG_FS_DEVFS in defconfig
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If we are using barebox on a NiosII/e variant, the
mul instruction is not supported and causes an exception.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add xload as vaild update type. Default name should be stored in enviroment
variable "xloadimage"
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If booting from NAND GPMC_IRQ_ENABLE is not cleared, causing crash if kernel
request the gpmc irq. gpmc_generic_init clears GPMC_IRQ_ENABLE
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now a 'devinfo gpmc_nand0' shows the current used eccmode
instead of <NULL>.
The function omap_gpmc_eccmode is now called by dev_set_param.
Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The _update script does not check the return value of erasing a partiton or
flashing the image to the device. Added this check to get a evaluable return
value from the update script.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also add the '--no-run-if-empty' option to xargs to avoid an
error message when no files/folders were found.
Signed-off-by: Hubert Feurstein <h.feurstein@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix the warning/error:
drivers/mci/mci-core.c: In function 'mci_card_probe':
drivers/mci/mci-core.c:1195: warning: implicit declaration of function 'pr_warn'
...
drivers/built-in.o: In function `mci_card_probe':
mc13892.c:(.text.mci_card_probe+0x68): undefined reference to `pr_warn'
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While getting rid of all the format(barebox_printf) warnings was nice,
it caused the printf calls in arch/sandbox/os/common.c to get directed
to the barebox versions rather than the libc ones causing a crash:
E.G. before this revert:
nm -a barebox|grep -w printf
0000000000404fa3 T print
And after:
nm -a barebox|grep -w printf
U printf@@GLIBC_2.2.5
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit 6b082cfe9f.
The following patch came across the mtd mailing list today. I thinks its also
valid for barebox (it handles a special corner case, but maybe it can hit us,
too):
In nand_do_write_ops() code it is possible for a caller to provide
ops.oobbuf populated and ops.mode == MTD_OOB_AUTO, which currently
means that the chip->oob_poi buffer isn't initialised to all 0xFF.
The nand_fill_oob() method then carries out the task of copying
the provided OOB data to oob_poi, but with MTD_OOB_AUTO it skips
areas marked as unavailable by the layout struct, including the
bad block marker bytes.
An example of this causing issues is when the last OOB data read
was from the start of a bad block where the markers are not 0xFF,
and the caller wishes to write new OOB data at the beginning of
another block. In this scenario the caller would provide OOB data,
but nand_fill_oob() would skip the bad block marker bytes in
oob_poi before copying the OOB data provided by the caller.
This means that when the OOB data is written back to NAND,
the block is inadvertently marked as bad without the caller knowing.
This has been witnessed when using YAFFS2 where tags are stored
in the OOB.
This patch changes the code so that oob_poi is always initialised
to 0xFF to make sure no left over data is inadvertently written
back to OOB data.
The comment above is for the linux kernel, but the same is valid for barebox
and CPUs writing the OOB date controlled in software (like the Samsung
S3C2440 does).
Signed-off-by: Adam Thomson <adam.thomson@alcatel-lucent.com>
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Hi
When setting the default env of barebox to a svn directory the build stops
with questions on removal and the barebox env is polluted with svn files.
The patch below fixes that.
Tested with 2011.03.1. Newer versions don't boot anymore on my pcm043 :-(.
Signed-off-by: Tim Sander <tim.sander@hbm.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Heavily based on original Juergen Beisert's code.
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The interface emulates the Linux commands, except that you can
specify a sub area - E.G.:
barebox:/ md5sum /dev/fd0 2M+1M /env/config /env/bin/boot 10+2
61c4c0180b044191d28f27545f43562f /dev/fd0 0x00200000 ... 0x00300000
908b84bcbadd2f263583a65ff31d1cad /env/config 0x00000000 ... 0x000003a7
f23bd15825cc5006cf5f9fd486d82d2d /env/bin/boot 0x0000000a ... 0x0000000c
Adds around 1400 bytes (+ size of digest code) with everything enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch fixes loadb and loady commands. tstc() should return true if
console_input_buffer is not empty.
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The flush_dcache_range function takes an absolute end address
so we have to add start address to the second parameter.
Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to match the example I'll provide on my website,
set the system frequency to 100MHz in the generic board
nios_sopc.h
Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The device init function has the name of one of my board (comBoard).
This patch fix the name of the function to generic_device_init.
Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds kernel_loc, kernelimage_type and bootargs to the
generic board environment. This allows the generic board
to boot linux on the example I'll provide on my website.
Signed-off-by: Franck JULLIEN <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Handle value == NULL similiar to how value == '' is currently handled.
hush's builtin_getopt() seems to trigger this for OPTARG.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is useful to detect a barebox image and to be able
to copy only the image size if barebox is stored on
raw partitions which are bigger than the image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix following warning:
scripts/kallsyms.c: In function ‘read_symbol’:
scripts/kallsyms.c:81:9: warning: ignoring return value of ‘fgets’, declared with attribute warn_unused_result
Solution overtaken from kernel tree.
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix following warning:
arch/arm/boards/karo-tx25/lowlevel.c: In function 'board_init_lowlevel':
arch/arm/boards/karo-tx25/lowlevel.c:75:6: warning: unused variable 'i'
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix following warning:
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c: In function 'eukrea_cpuimx35_devices_init':
arch/arm/boards/eukrea_cpuimx35/eukrea_cpuimx35.c:176:15: warning: unused variable 'tmp'
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>