Fixes [YOCTO #10294]
Provided text noting that if packages in the PACKAGES list are
empty are not generated, unless generation is forced through
the ALLOW_EMPTY variable.
(From yocto-docs rev: 1c89e0edf7e038f733b9b95bb884648d953b9574)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10292]
I added an additional paragraph at the end of the section that
provided more detail on what the bitbake -e and bitbake -e recipe
commands provide in the way output.
(From yocto-docs rev: 1dcdb6781105f046328271e2b4ba7d875b222dcf)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed the note box formatting for the cross-reference
from the sdk-manual and dev-manual sections that
talk about devtool. The reference is now non-note
form and goes to the ref-manual devtool quick ref.
* Added devtool upgrade as a third item in the list that
introduces methods to use devtool.
* Fixed the working on the devtool finish step 5 for both
the dev-manual and sdk-manual.
* Renamed the new chapter that describes different projects
you can use devtool on. The focus is on using the SDK
toolchain directly.
* Scrubbed the entire sdk-manual for the term "toolchain
installer" and replaced with "SDK installer".
(From yocto-docs rev: 6d4daef49cc6d54a700a8c3965c9e8814f75d20a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I put in some introductory material for the new devtool
quick reference chapter.
(From yocto-docs rev: dc46f47692a533ac2450bf459c098435c57e6c07)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Made several improvements to this section.
* fixed a typo where a YP release was referred to as 7.1
instead of 1.7
* Added a note box to the "Using Variables" list item
elaborating on the expansion behavior.
* Removed the detail around the WORKDIR discussion.
* In the "Loccate or Automatically Create a Base Recipe",
I added the devtool add method to the list of ways to
create a base recipe.
(From yocto-docs rev: 79c86fc3653c747ae42f08528063a8984cdd3b4d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I extracted the sections on Makefile, Autotools, and Eclipse into
their own new chapter. Seemed to make sense as they are projet
types for both standard and extensible SDK types. Also, swapped
the order of appearance from standard first to extensible first.
This swapping caused a bit of rewriting.
(From yocto-docs rev: 138a4d5576123da800a8fd8d99462a138ceeb743)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Did the following:
* Added the devtool upgrade flow to the SDK manual.
* Removed the devtool Quick Reference from the dev-manual and
added it as a new chapter to the ref-manual.
* Made sure all the links and cross-references work now with the
moved material.
* Updated the Make file so that the manual set builds correctly
regarding the new chapter in the ref-manual.
* Created cross-referencing notes in both the sdk-manual and the
dev-manual to the newly located devtool Quick Reference chapter.
(From yocto-docs rev: fda0bf68b3654b1b96407d552c5254657465b5fc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I needed a new figure and a new section.
(From yocto-docs rev: d413ca7b9b946450af7c2c15ab0e68e9181517e9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I updated the figure to use the new devtool finish command. Also
updated the text to provide an approprite description.
(From yocto-docs rev: b26ee800e457a84fe45ecf031cb94f65c38d05f5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These notes can't be in the final version of the manual.
Now is the time to get them out.
(From yocto-docs rev: 600b4f2c7360b30d12fdc7ed0f5ba41bc09fc778)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10032]
The fix to remove the BitBake Commander from the tools to install
when dealing with the Eclipse Yocto Plug-in has happened.
Consequently, I removed the developer notes in the manual stating
that the Commander was still showing up there. The manual set
is now clean of this stuff.
(From yocto-docs rev: fbe169b086faac571de8a2ebd9d32682162cfd31)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10267]
The example works better using OECORE_TARGET_SYSROOT for the
aclocal line. I changed it to that.
(From yocto-docs rev: 362b786e7bf2083c5809e961f61c0ad81b778d71)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10248]
Provided more accurate descriptions for this variable and task.
(From yocto-docs rev: 422fa705165748230470fffc4fcc543ee38b1f2e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the devtool add and devtool modify flow diagrams and
supporting text to exactly match those from the SDK manual.
Also, updated the help output generated from the devtool --help
and devtool add --help commands.
(From yocto-docs rev: 002297a8ed3979f012fe228b7edb77514e7528a2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10248]
Applied some review changes. Minor wording tweaks and typo
fixes.
(From yocto-docs rev: a9e99c8b44c48c74448487187cebfe8df331e9e1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A new command devtool finish has superceded the final commands
in the SDK workflow. I updated the two figures (add and modify)
to reflect this new flow. I also updated the ordered number list
to match reality.
(From yocto-docs rev: 0ba31e730cd748d06eab8d46b38764cda5c4e3bd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added a new variable description for SDK_INCLUDE_TOOLCHAIN.
Along with the new glossary entry, I updated a couple places
where it would be relevant to cross-reference the new variable.
(From yocto-docs rev: df99b097595e7488a93354082b8d9f33acd9c229)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fixes [YOCTO #10252]
Added a note to help avoid confusion regarding the version
specification used in PREFERRED_VERSION.
(From yocto-docs rev: 38edc25b04c1a6d673ceb25f5548898d5b63b120)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
fixes [YOCTO #10248]
The bulk of this change is a new section called "Automatically
Added Runtime Dependencies". Additionally, changes were made
to the RDEPENDS and DEPENDS variables. Some cross-referencing
to the new material was also added in the do_package task entry,
the do_packagedata task entry, the PKGDATA_DIR glossary entry,
and the PRIVATE_LIBS glossary entry.
(From yocto-docs rev: 16504cd0eb23e102322c6c6096c5b52500a04640)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed the description to match that what is in the code.
(From yocto-docs rev: c099dd0b7c8d205b56009606e61ae359017f5783)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided clearer instruction on how to set up a new SSH
connection when deploying an application to QEMU.
(From yocto-docs rev: 93adc542a40e86377380684e1ce294edd0fd7268)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10216]
Creted a new section titled "Viewing Package Information with
oe-pkgdata-util". This section describes how to view information
for already build packages through the use of the
oi-pkgdata-util command.
(From yocto-docs rev: 8d9465f320f973ecaeecb3eae594b29c0d7f4960)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10183]
Added a new variable entry for the PACKAGECONFIG_CONFARGS variable.
With the introduction of the new PACKAGECONFIG_CONFARGS variable,
many places in the mainstream YP documentation that referenced
how to pass configure arguments using EXTRA_OECONF needed to also
make mention of this new variable. I added many cross-references
to the new variable.
(From yocto-docs rev: 00f02d45319bab90b72eab89fcb69cbe8bd05bb5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7546]
Applied changes throughout this section to move it from Luna to
the Neon version (latest) of Eclipse. We now provide a single
thread for Eclipse, which is based on the latest version (Neon).
Information for Mars, which is also supported) is in a new Appendix
C.
(From yocto-docs rev: 82995d9c49e4c55707591a1375c5d86874c589b0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10208]
Apparently, this should be "python3" and not "python" now.
(From yocto-docs rev: d9547b426d9ab8a2d79fac95405a7a371a4a35ac)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10208]
The example command was wrong. Had the wrong package name since
we moved upward with Python. Using "sudo dnf install python3-GitPython"
now.
(From yocto-docs rev: d94469ac4860841c3955161ce1b67a962c4f3f8d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This is the minimum requirement for YP 2.2 release.
(From yocto-docs rev: 0aebdd8556a6e5a52c0caf28dc97c1872b40e950)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9899]
This variable does not need documented in the glossary.
(From yocto-docs rev: 4082b752239025c8696bb248a20ac1fb5380c7af)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10197]
Provided better examples and a bit of a historical note.
(From yocto-docs rev: 5845aadcc4e6932abde4ce7c74834c0f2a9fb806)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Applied some rewording to the last bullet of the "Known
Issues" section in the "Enabling GObject Introspection
Support" section.
(From yocto-docs rev: 6cc0c7925984a29a115819195b800e2ecd8b4757)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9899]
I put this new variable description in.
(From yocto-docs rev: 32040277a921d0013256bed5aa7e32e14d1220ba)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10178]
Previously, YP did not support Python 3.0. We mentioned that
in the manual in several places as a requirement for running YP.
I removed this exclusion in the following areas:
* yocto-project-qs - the section that tells what version of
Python you need.
* ref-manual - the section that tells what version of Python
you need.
* ref-manual - the FAQ entry about not having the right version
of Python.
(From yocto-docs rev: 5a0d3ac1c2a4154b93dc925b8074bc9243a86faf)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10176]
Provided a more complete description of this variable.
(From yocto-docs rev: 164bf11250c965aadd1ee1573267aa31daa8a4e8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10175]
Provided a more detailed description of this variable.
(From yocto-docs rev: 95a80313dfb276425020a61d199b75d259b47ff1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10174]
I applied a more descriptive explanation of this varialbe.
(From yocto-docs rev: 7c6c2645b7e74e1c7de0d43b35307c8917648959)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10173]
I provided a more detailed description of how this variable
works. Also provided a cross-reference link back to the
variable at the end of the PREFERRED_VERSION variable.
(From yocto-docs rev: 679b205eea541b89e220656f7aa304d0f343c8a6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10172]
I added a new section on how BitBake reruns tasks based on the
stamps files. Also put in some cross-referencing links to that
new section in the stamps entry for the structure chapter and in
the STAMP variable in the glossary.
(From yocto-docs rev: da8779d9eb85473cd6b0f74e9e1371e1d277890f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9707]
The original link was bogus. I applied four instances to fix the
link.
(From yocto-docs rev: f03d5af6ddf0430cf98332c5d54f3fe68fb69cf9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9707]
* Replaced gummiboot with systemd-boot in the dev-manual
* Replaced the gummiboot class with a new systemd-boot class
* Replaced the appropriate gummiboot variables in the glossary
with new variables SYSTEMD_BOOT_CFG, SYSTEMD_BOOT_ENTRIES,
and SYSTEMD_BOOT_TIMEOUT.
(From yocto-docs rev: 778b620e65cc68531b3c41aeb8f27f2a07eb0d00)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10144]
In the "Viewing Variable Names" section, there is a list of
example configuration files. I added bitbake.conf to the list.
(From yocto-docs rev: 5a19d5c314881e223aaa567c8eb8f6ed4fbc01df)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10141]
Provided several fixes to address this situation:
* Renamed "Debugging Build Failures" to "Debugging Tools and
Techniques" as it fit better the subsections.
* Renamed "Viewing Dependencies" to "Viewing Dependencies
Between Recipes and Tasks" as it fit better the description.
* Added a new "Viewing Task Variable Dependencies" section
to describe how sigdata and siginfo stuff can be used.
* Replaced the contents of "4.3.4.1 Debugging" with a shorter
bit that now references into the new section on veiwing
task variable dependencies.
(From yocto-docs rev: 539d76366055bed74ccc926519e969324cac470d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10138]
Small fixes for the following variables:
* PKGV
* PV
* PE
* PR
(From yocto-docs rev: 4ffc6a2fed330cec320e744561df3aad2a349cf5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the Bitbake commander item and renamed the ADT one to SDK.
(From yocto-docs rev: 7bb7823bd9991ce95315b76bdfb3175c53198401)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Placed a note in step 4 of the "Workflow Using Eclipse(tm)"
section that an alternative method to getting the target
root filesystem and toolchain is to build them out.
Referenced the wiki.
(From yocto-docs rev: 60720be0fe0d29a0b695005bb40f5b0c25475b55)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dumped a link to pre-built kernel naming information. The
link was to the sdk-manual, which made no sense.
(From yocto-docs rev: 9b7a9f8217d9251f2d7166afc0bb3b4235264201)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7546]
First draft of the new appendix supporting the Mars version
of eclipse. New appendix file created and entry made to
the sdk-manual.xml file to include that new appendix file
into the main book.
(From yocto-docs rev: 2fb79c29bcbb5c0801f67d4c245c07c3aa9d2ca2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
sdk-manual: WIP on appendix C
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove documentation as swabber was removed from oe-core with
this commit: commit a7ddbea345
(From yocto-docs rev: f3c462b2c6aa20de53c77e5d93cf397ae36cb2bb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous description was not accurate. Looking at the code,
SERIAL_CONSOLES_CHECK does not act like SERIAL_CONSOLES, as it
will not add consoles to enable but only check and disable
consoles defined by SERIAL_CONSOLES. Also, the previous patch
adds aliasing functionality that needed to be documented.
I (Scott Rifenbark) did a bit of word-smithing here from the
original patch.
(From yocto-docs rev: 55d07048e831f0dbc955b74e029fe26ed276675b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The SYSLINUX_ROOT variable was renamed to ROOT_VM in krogoth.
(From yocto-docs rev: c4bbe8bc4967dd631b939f6806d65e2862df3424)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10131]
Fixed some small issues here and there. Also, provided a
second itemized item in the note box turning it into a
notes box.
(From yocto-docs rev: a736c3bb707e81eda7760c642084a5a7c4de2539)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10132]
My attempt to be complete on the filenames that have a "pid"
portion were not correct. I have removed them from the first
paragraph.
(From yocto-docs rev: 8261b93b39df9abc9f9d6ccb4c00dc11330ad516)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10135]
Some small problems were fixed:
* Added a cross-reference in the FILES glossary entry to the
PACKAGES variable. The two are tied and there was not a
reference to it.
* Removed a redundant "/" character in a pathname example in
the dev-manual.
* Removed a redundant "/" character in an example pathname
in the FILES glossary description.
(From yocto-docs rev: 11a397c232696deece7ac5c6dafcadb87d7a5775)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10132]
Provided a better description and removed a deprecated sentence
near the end.
(From yocto-docs rev: bbe588e19bb9ed58883ae7c770da551de659e982)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10131]
The section was renamed "Viewing Dependencies" for consistency.
The section was moved up to be the third item in the sub-section
list. The section was extensively re-written to provide more
clarity and options for the user to view dependencies.
(From yocto-docs rev: d521c3aabe6ded105cde6f7b3563c85340f759fd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10099]
Renamed the log file section to better describe what the user
is accomplishing.
Renamed and repositioned the variables section to better describe
and emphasize the task. Also fleshed out the variables section with
more information.
(From yocto-docs rev: 0606fe481416a07bf98fc8ae79a30c1d62e75e6d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9285]
Added a new bullet item to note that Using QEMU in usermode
might not work properly when running 64-bit binaries under
32-bit host machines. In particular, "qemumips64" is known
to not work under i686.
(From yocto-docs rev: 896beb3fddd427f8327d4ddd35be253866c90377)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10094]
For PROVIDES, I added information about how the do_package
task goes through PACKAGES and uses the FILES variable
corresponding to each package to assign files to the package.
For FILES, I added a blurb to the existing note how you can
find default values for the FILES* variables.
(From yocto-docs rev: c70f79a608076c5c0490918b87986554bc5d8353)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided a better, more accurate description of this variable.
(From yocto-docs rev: 020f927bc01d662601fb44b19e4c6bc70e5e5ee7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10070]
Updated these three variables with various items to make clear
that PARALLEL_MAKE and PARALLEL_MAKEINST won't work unless
EXTRA_OEMAKE is passed to "make".
(From yocto-docs rev: 4f8b56cc67502cd672e0296cf2f143ecbcde22ac)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10069]
Added a note at the end of the variable description to
explain how runtime virual dependencies work.
(From yocto-docs rev: de1d16017c27b6b2502735fc41acd22660f6e7b9)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10060]
I provided a new section in the Technical Details chapter. Also
some extra explanation was added to both the do_install task and to
the D variable.
(From yocto-docs rev: 565fb11d72bf8c585469bcf65f92b6738e344813)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10002]
Created new base description for EXTRANATIVEPATH.
(From yocto-docs rev: aafc2de2657203440fe4b0bf3895cf367063bed1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
There was a mistake referring to the wrong example recipe. I
changed "core-image-sato-initramfs.bb" to
"core-image-minimal-initramfs.bb" for the fix.
(From yocto-docs rev: 4d63e1fc5786556dd0dd5ca1435252d43dbd745a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10013]
I enhanced the description with more detail all around.
(From yocto-docs rev: 319dabecf5abf0884295b991f681bed0e1dbf673)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9964]
There was a small fix to change oe_runmake task to oe_runmake
function.
(From yocto-docs rev: aa049c9165c67e041c84fab9fabfbe98828c79bb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
Added a new paragraph to the end explaining the default behavior.
(From yocto-docs rev: 1591f96fc04f64906145f272d205ec6c44ac70c0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #10012]
Updated the description completely. New more detailed information.
(From yocto-docs rev: cb6ce91674ab092324f97ca4e56a0cbcd9140fbe)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more information about virtual targets to the end of the
description.
Fixes [YOCTO #10011]
(From yocto-docs rev: ce7ae0c6ad4ad3a0c2422b797556563dc48a9a5b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9988]
Added a link to the MULTIMACH_HOST_SYS variable from the
STAGING_DIR_HOST variable where it is referenced.
(From yocto-docs rev: 0f72b58a7bc1271245d139726f1145d5d99acee4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9988]
Updated the STAGING_DIR_TARGET variable with a better introductory
sentence.
Updated the MULTIMACH_TARGET_SYS variable with a more expanded
explanation.
Added a new glossary entry for the MULTIMACH_HOST_SYS variable.
(From yocto-docs rev: d17873d695772b62325de35dd0e5b9ccc7f12f1a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9989]
Added a link to the WORKDIR term in the D glossary description
example.
Also, moved the do_checkpkg task from the section of showing
normal recipe build tasks to the the section for manually
called tasks.
(From yocto-docs rev: 548e2fdfeae9d67bbad73ee3ab69a64a9a6ce9ff)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This reverts commit 95b740d719a7a6ffe3a06a1f152af4d877ee08c7.
I inadvertantly put this variable description in before they had
settled on it.
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed an errant comma and rewrote the final area of the section.
Fixes [YOCTO #9976]
(From yocto-docs rev: 19924dee2ebec3ff2a53152ecb8f79172eb43060)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Cleared up the last third of the description with better structure
and wording.
Fixes [YOCTO #9970]
(From yocto-docs rev: a2dbea4f3bbdddd72c86a5ade86ac822cd9bfecd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a new suggest section to the existing "Debugging Build
Failures" section. This section describes how to check for
build-time dependencies.
Fixes [YOCTO #9976]
(From yocto-docs rev: 54cd7161593ba35b63a26ade312cc4aee17e3515)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9968]
Made a link for the STAGING_DIR_HOST variable for consistency.
(From yocto-docs rev: eeb163ead40752d69f2f6c19e859e82109ef967d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the example statement line to match the actual assignment.
(From yocto-docs rev: 45e9274fcca0a285bda38cad8a6fe5e7bb05bd80)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9970]
Added more detail to the do_deploy task.
(From yocto-docs rev: 1b2daf814011dbc3c5987313442e95e18e83e180)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided more detail in the first sentence.
Fixes [YOCTO #9968]
(From yocto-docs rev: 15080a565bafdfffe0c13a0a18fd1c011773cc25)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9967]
Added more detail to this task description.
(From yocto-docs rev: 8cb154493a6b4ee541826f898b823a4dc2795f88)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9966]
Added quite a bit of detail to this task's description.
(From yocto-docs rev: c29d86813b9cb9bc1c9c02aeffb5cfd99fc5a542)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added more detail for this task.
Fixes [YOCTO #9965]
(From yocto-docs rev: e50207488b8262bb46e58c4b9f40e487c15abc67)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9964]
Added more detailed information to the do_compile task. Also, provided
some information about oe_runmake in the base.bbclass refrence.
Finally, put some detail in the "Shared State" section concerning
do_deploy[dirs].
(From yocto-docs rev: 5d0612a57cc8e035a2194ada21e65055ef2b8a2e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9963]
I created a new cautionary note to warn the user to use the correct
operator "+=" rather than "=" so that they do not destroy $PN.
(From yocto-docs rev: e6861ffe9400b1ee48cc46ccfc6e8d65efbbec8c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9950]
I Provided a suggested introductory sentence and a better link to
the logging.class file, which is near the end.
(From yocto-docs rev: 6f296266b35f17792510d6a01f5640ba30818a22)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9950]
Added more detail on the functions for logging.
(From yocto-docs rev: b7ed4d84ae5221765201fe661af3741fb01da738)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the note with some formatting and grammar changes.
Fixes [YOCTO #9933]
(From yocto-docs rev: afef28ae894c313f85ddbaeef8b0abbc2700ba2c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9909]
Added some technical clarifications to the existing note to be clear
about what is causing the limitations in this case. Applied some
formatting fixed to for the use of the include word.
(From yocto-docs rev: cbbd960d8665d9fb6b92698c14728d1c0bcc659f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9933]
Added two notes to help clarify how DEPENDS works with pre-compiled
objects. There are some details that trip people up.
(From yocto-docs rev: 06917e97adf24816b0aee6fdfdd14aa79d4c6ab2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Using 0.0.0.0:8400 as a better way to set up this address. Easier
on the user.
(From yocto-docs rev: bef463d2743989596388fda7e97119f43da045a8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9909]
Added a note that talks about how the BBCLASSEXTEND mechanism
adds recipe variants.
(From yocto-docs rev: a05990ecb760519a685a1c5ddcf2ce3e048bfbf2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9861]
Placed some section links into the "Tasks" and the "Dependencies"
sections of the BB manual from several areas:
* The "Normal Recipe Build Tasks" section
* The variable description for DEPENDS
* The variable description for RDEPENDS
(From yocto-docs rev: d96347fdb4c3d5a34695f20e995f165c5ba91c32)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The TOASTER_DIR=... checksettings line is too long and got truncated
when documenation in pdf format is made. Splitting it to two lines
should fix this.
(From yocto-docs rev: f3bf1c7b4094a9fda60f7f9d99363a947afed261)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Pointed SECRET_KEY, STATIC_ROOT and DATABASE keywords to the
Django documentation.
(From yocto-docs rev: d4a6291ad6ef40963c601e60dd861c76499d8b3f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated instructions of restarting apache. As OpenSUSE way of
restarting apache is the same as Ubuntu and Debian it's enough to
just add OpenSUSE to the list of distros.
(From yocto-docs rev: 0aed02ca72303574d17996dc56484f76c772c864)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added sample configuration files and instructions for the runbuilds
systemd service. Service runs runbuilds in a screen session for user
convenience. User can attach to the session to see the runbuilds
output, monitor logs and build environment.
(From yocto-docs rev: 40beaa575fb96a06992a1d62bb45cd0cbbe2ae86)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed access control instructions to work with Apache 2.4 according
to https://httpd.apache.org/docs/current/upgrading.html.
Added 'Require all granted' for wsgi.py according to
https://docs.djangoproject.com/en/1.9/howto/deployment/wsgi/modwsgi/.
Changed python module path for WSGIDaemonProcess as python version
changed and modules are installed to the different path.
(From yocto-docs rev: 503b6c3c250936e889ce146bfcd301ed55e638d2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Added description of the location of apache configuration file for
OpenSUSE Leap 42.1
(From yocto-docs rev: 50f9a376072ce0b7d3ed4650ca3c3ea8e5ff14dc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Here is a quote from Django 1.9 documentation regarding this:
mysqlclient is a fork of MySQLdb which notably supports Python 3
and can be used as a drop-in replacement for MySQLdb. At the time
of this writing, this is the recommended choice for using MySQL
with Django.
(From yocto-docs rev: deb02aeea4912f9d7978de3529467e4503eeeffb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Creating separate toaster account would make production setup
more isolated and maintainable.
(From yocto-docs rev: 50ed20ad881da8d454a520903dadff20c5011fae)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed mod_wsgi package names as Toaster requires python 3 version
of mod_wsgi. Added missing python3-pip, mariadb-server, mariadb-devel
and python3-devel to the list of packages for Fedora.
(From yocto-docs rev: 8a2da9855c0ed5dd137808fa976cbe707048551e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed Ubuntu and Fedora versions to the latest ones.
(From yocto-docs rev: 50a7d0110e9f8c7c3c8c8c5b6e3a1495c9f9ff79)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Our switch to python3 requires us to dump the virtualenv approach
as long as we need python to resolve to python2 in the same shell
that python3 resolves to python3. To enable users to install
Toaster's python package dependencies locally, we are changing to
using pip3 and these doc changes explain how to do that.
(From yocto-docs rev: 06b8820bcb90d1855ccb2712b616bb89847a148f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Creating separate toaster account would make production setup
more isolated and maintainable.
(From yocto-docs rev: 33c638d3e9a68d06d929276c6064d567ed7fe696)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9251]
I added a new section on the task variants for setscene, which uses
the shared state cache. The section describes the BitBake processing
that helps the build system to not have to build everything from scratch.
(From yocto-docs rev: 6aa0e6b837de14dd7d6c5ef34328bbf268dd6d71)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9843]
Some minor rewordings and removal of a stray comma.
(From yocto-docs rev: 0b0c8b0b1c4edb86eb2b20c73ffb83d640f6b916)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9380]
Updated the shlibdeps description for this variable to try and
satisfy automatically added version restrictions.
(From yocto-docs rev: d94de0b24591206620c83a9022a9d813141a7637)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9843]
The variable description was very brief. These changes added some
substance to the description and how the OpenEmbedded build system
uses the variable.
(From yocto-docs rev: cc9117d4e16c56dd54f81804fda94561e61d91a7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9672]
A couple typos here needed fixed. Also, a missing statement in
the JSON example.
(From yocto-docs rev: 8756cb363a70a8b77077a666c62c0f678ffb3d3e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO 9823]
I added more details to the explanations of how shared state is
implemented. Included a bulleted list of the various statements
of code to help explain flags and settings.
(From yocto-docs rev: 518352f88c8dda16f2915a7bb9901ffd7686d739)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated the introduction of the trio of variables used for package
feed naming in the "Build Considerations" section.
Fixes [YOCTO #1882]
(From yocto-docs rev: 4c7efd08f9f543dd3c4f2e6d68c72d16fd7b0b8c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Edits to explain that by default, DISTRO_FEATURES backfills
bluetooth support with Bluez5. If the user wants to use the
Bluez4 feature, they need to backfill consider Bluez5.
(From yocto-docs rev: 4e8b34c8c5841cdc1cae564decae4689ae4f2b11)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The file was named 'configure.in' and was slightly different than
what it needed to be in order to work. The file needs to be named
'configure.ac' and have slightly different contents. Fixed both.
(From yocto-docs rev: 1b80e90848d23737462f8b0e55b2ff604f9abf41)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9773]
Updated two examples that set SSTATE_MIRRORS so that they match the
changes made by YOCTO #3220.
(From yocto-docs rev: e07674cd0665c485173eaa05c4072c287411b81f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9672]
Updated the "Exporting Tests" section to reflect the proper
local.conf settings.
Added a new section "Installing Packages in the DUT Without the
Package Manager" that describes how to use a JSON file to accomplish
package installation on a Device Under Test without a package
manager.
(From yocto-docs rev: 0275d2a8234a6418f32e802bcf46b7e68053e05a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1882]
Re-did the steps to set this server up.
(From yocto-docs rev: 45e073a60ef7b1d540439b621266a9019a3d2947)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the extra server instructions and just left the ones
for SimpleHTTPServer.
Fixes [YOCTO #1882]
(From yocto-docs rev: fb502c608b015c37f361f4b54874ad199a67feb4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I applied some grammar edits and re-wordings as directed by
technical reviews.
Fixes [YOCTO #9671]
(From yocto-docs rev: b5a5d3d3b311cb83ed61bfd247fbf802027fe5c4)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9671]
Applied some review comments to these three variables.
Edits to be sure to qualify that the variables only to recipes
who inherit the distrodata class.
(From yocto-docs rev: 1b094b0567fa75d1c77da7ec04641d034f29272d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9671]
Put in descriptions for the following variables:
* UPSTREAM_CHECK_GITTAGREGEX_pn
* UPSTREAM_CHECK_URI_pn
* UPSTREAM_CHECK_URI_pn
(From yocto-docs rev: e00470cbf98714236f3197dd538371488d8f03fb)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #1882]
Edited the sections in the "Working with Packages" section
beginning with the "Build Considerations" section with text
received from Daniela Placencia.
(From yocto-docs rev: 07a55662d6ac98875555f80f766de263b131185f)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The locations of the kernel .config file and source direcotry
moved a couple releases ago. Updated the documentation
accordingly.
Also added a note explaining how to check the expansion of
variables, which servs a couple of purposes:
* For curious readers, shows them how to understand where
these variables come from and how they are used.
* For suspicious readers, shows them how they can verify that
the variables in the documentation are actually correct.
Author: Tom Zanussi <tom.zanussi@linux.intel.com>
(From yocto-docs rev: a4f92870e70cb625f2987a59aff3f460457b4889)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added some reference links to this variable in the ref-manual
glossary.
(From yocto-docs rev: 2fe4860f99f0898fb4a850e4de133337b695dc6e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The string was a copy paste error. It was using the string
for INHIBIT_PACKAGE_STRIP.
(From yocto-docs rev: d2efc36a7bc39b3fb596286dcde5efa1b8fead7c)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Updated poky.ent to have the appropriate 2.2 variables
* Updated all manual revision tables to have a new entry for
2.2 - used "Sometime in 2016" for the date.
* Updated the mega-manual.sed file to process internal links
for 2.2.
(From yocto-docs rev: 2acd49ee197e3e3e725f4cb8cc432437afd8646b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lists packages removed if package-management was not in
IMAGE_FEATURES.
(From yocto-docs rev: 45768d661b800782e32b76b4fa7efa0f70cb7e47)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates included minor items for wordings and clarity. Review
comments from David Kinder, Stephen Ballard, and Paul Eggleton.
(From yocto-docs rev: b25e5cab60f9c1e059fadd844a3a75d9df450ebf)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Needs to used the downloadable XSL files and not the static
local 1.76.1 versions.
(From yocto-docs rev: 1dfc6081ffb745e424ff5f73c708e2559466831e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Referring to multiple options that function the same as
two separate options. I had two successive sentences that were
inconsistent.
(From yocto-docs rev: 291fa846dba2bfcffae9d0538eba65df71c1092b)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This makes the use of this replaceable consistent with the
migration chapter in the ref-manual.
(From yocto-docs rev: 5c2f13f505986d2efc7bfa72c79b933f5a5c5ec1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This file was still using the 1.76.1 XSL style sheets. They need
to use the downloadable ones.
(From yocto-docs rev: 27e29bedb2d1c080a23298fc0ae23054c40971aa)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
Several occurrences of tools-profile and the like had to be dealt
with.
(From yocto-docs rev: 62f45579970f47d22dabe921a51c663059a04576)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These classes have been removed. The bootimg class was sucked
into the image-live class. I removed the reference sections to
both classes and fixed the references throughout the manual set
as needed.
(From yocto-docs rev: 649d56b54987580039cbd52f54642112f810ffad)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Dropped the "experimental" verbiage and added real detail.
(From yocto-docs rev: ca63ab4bac2885037741afdc78ee307233159a2e)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Occurrences in many manuals and one figure.
(From yocto-docs rev: 26d30cd162083c62216fb4ab526d0b231f453de1)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This minimum Git requirement is now version 1.8.3.1.
(From yocto-docs rev: c68aa31442f7ac58a6f597f3074416afaab95882)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provided information about the new default "".
(From yocto-docs rev: 75ab9805614fc9501191eef0000c7a9214765392)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5517]
I added two package management system generic implementation
details to the section. This brings the section up to speed
as the definitive work on combining multiple versions of library
files into one image. We no longer have to refer the reader
to a separate wiki page.
(From yocto-docs rev: 450e718ca1b853f332c4e607a5a76efd689f7769)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Discovered typo in the file... "naivte" instead of "native".
Fixed.
(From yocto-docs rev: baa9fb2b553db425c8a5cfca04d913963e24d0a0)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With the introduction of a DISTRO_NAME_NO_CAP variable, the occurrences
of the DISTRO_NAME variable had to be checked to see if they really
should be using the "NO_CAP" variable instead. Output and actual
branch names are case-sensitive.
(From yocto-docs rev: 711a3255538298dd3c4bd2af8ad13bc2d159c872)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updated to "April 2016" for all manuals that use this table.
(From yocto-docs rev: 4d3753cc92c446668b0c383736c2071e24e53dd2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I handled the occurrences of "oprofile" and "tools-profile" throughout
as I could. They are not all done yet. These in this commit have
been removed.
(From yocto-docs rev: d76e264ea210846ad8080134bacd56462ba69d24)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9386]
Added some missing information:
* Added instruction to be in the poky directory before cloning
the meta-intel repository.
* Removed the "source" part of the string for the bitbake-layer
command.
* Added text to describe that the user needs to be sure that the
same branches are in play for poky and meta-intel before they
launch the build.
(From yocto-docs rev: 65461624691a566a5849c6d9df7b269c3de2eba7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added a variable named DISTRO_NAME_NO_CAP that can be used
to resolve to the branch name as it is needed on command lines
and as it appears in output.
(From yocto-docs rev: 595d81c31b0dcb442b351b05600da9480a9573b5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4047]
I went through and fixed a few areas where reviewers said there
was "quirky" phrasing. They might have been right in a few
places.
(From yocto-docs rev: 66fb97838f338ed3f787ec18f62702ef726ceffc)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8595]
Applied some wording changes as part of the review process from
Richard Purdie.
(From yocto-docs rev: 3c4fc3cbdecb7e3c8287a915b82bc5469288d5db)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #5092]
Added a new subsection to the "Configuring the Kernel" section to
describe the part of the configuration audit phase that deals
with non-hardware and hardware options.
(From yocto-docs rev: 2545c3f2cf45ffcc9bf9f388d929c8242b74b011)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9313]
Update the DL_DIR variable description to add a cross-reference
to the wiki page that talks about working behind a firewall.
Updated the 14.12 FAQ entry with new information about working
behind the firewall.
(From yocto-docs rev: 056e6881951023e62a7363ba60fe73cd6d2932b6)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8595]
Added some examples on how to force the version.
(From yocto-docs rev: 4a98ce1ed623cd9763731453316f2ff8d8b8b82a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9336]
I updated the "Debugging" section within the "Tips and Tricks"
section. The list of items did not provide detail on two
BitBake command-line options you could use to dump out
signature data into .sigdata files. Also, the .sigdata files
were incorrectly referred to as .siginfo files.
(From yocto-docs rev: 7836c386f4f7c011de710b6ec9f6be13045dc559)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #4047]
I added a new section describing how to add kernel features
from within a kernel recipe through the KERNEL_FEATURES
variable and the SRC_URI statement.
(From yocto-docs rev: d30925c65e3f49b2ba481f1e7f9cac98fe86f6af)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #8272]
I re-wrote the section to basically consider kernel metadata
coming from either inside the recipe (recipe-space) or from
outside the recipe, which would be like a "kernel-cache".
The re-write eliminated the term "in-tree" regarding where
kernel metadata could reside.
(From yocto-docs rev: d358c00fbb779328bd472494023ecb802da15d59)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #9264]
I commented out a large section that had to do with running
oprofile. Also, located and removed the link to that section
from the profile-manual.
(From yocto-docs rev: 63d6e754f994693c9a4d4b8211c6ef5f817c31f7)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I added the following note in the section that deals with running
Eclipse with a remote application.
Fixes [YOCTO #9276]
Currently, Eclipse does not support SSH port forwarding.
Consequently, if you need to run or debug a remote
application using the host display, you must create a
tunneling connection from outside Eclipse and keep
that connection alive during your work.
For example, in a new terminal, run the following:
ssh -XY user_name@remote_host_ip
After running the command, add the command to be executed
in Eclipse's run configuration before the application
as follows:
export DISPLAY=:10.0
(From yocto-docs rev: 7bf2875ff1653a8e50fa8e2bba540b2eb2512d2d)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixes [YOCTO #7894]
I created two new task reference sections: distrodata and
checkpkg. Also, updated the distrodata class description to
reflect the presence of these new tasks.
(From yocto-docs rev: 3896cbf640d296dafb5eda37f89bba31a47ca8a5)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Removed the bitbake option and the TMPDIR terminology.
(From yocto-docs rev: c543e00eeb9e9a8074dfb195c971c37c095ecbdd)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The term "meta-toolchain" is legacy now. I went through and removed
its use except for where it appears still as output from the
oe-init-build-env script.
(From yocto-docs rev: 1cc134060459278997d57f1293f54091c5404d85)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changed the heading for "Optionally Building a Toolchain
Installer" to "Building an SDK Installer". This changes the
heading and many references to that heading.
(From yocto-docs rev: 97d8cd34d0dd0993b1b1135bb75f2212bb46878a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Better placement of this link. It did not need to be in the
<literallayout> example.
(From yocto-docs rev: 53c33ea4cc929e016812f0d3aac0d302758dc0f8)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Removed some eMenlow stuff
* Cleaned up the description of the BSP structures we have now.
* Various links fixed into the SDK manual.
* Other minor fixes.
(From yocto-docs rev: 5e45005d7ff2254df2754a5ea2d7efd7f1c19a42)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Probably should have committed these separately but....
* Updated the BSP guide to use an example that we support.
I removed the eMenlow stuff completely.
* Fixed poky.ent so the 15.0.0 stuff is used for the variables.
This supports the 2.1 release.
(From yocto-docs rev: 598b261725235b6f160561db22bd9f31ec721066)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Fixed some wordings
* Fixed some links for consistency
(From yocto-docs rev: 9737ba3a572140bec892ffb555241a2259bd517a)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Set year to 2016 and fixed some variables.
(From yocto-docs rev: d1e15dac45cb689c59d9301af776101336e07bf2)
Signed-off-by: Scott Rifenbark <srifenbark@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Scott Rifenbark
Maxin B. John
California Sullivan
Jonathan Liu
Ed Bartosh
Michael Wood
brian avery
Yi Zhao