The dependency listed in layer.conf is incorrect, gcc-cross DEPENDS
on ${TARGET_PREFIX}libc-for-gcc, not virtual/libc. These happen to
resolve the same values however they may not always both be built.
The result of this was that gcc-cross gets a different task hash
depending on whether virtual/libc was included in the build.
Specifically "bitbake m4" and "bitbake virtual/kernel" would result
in different task checksums.
The fix is to use the correct dependency name.
[YOCTO #8692]
(From OE-Core rev: 464a4f628f4ec20e2220312e0caa40019edf58ad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes have been removed (some a very long time ago, pre-dating
OE-Core).
(From OE-Core rev: 9e5d037af17ad6dc38b3c7351b5862c301391d13)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As oe-core commit 37c8c2c5f6937520eaf9f5d981f9315e36eba4bb and
fa7bdf96b8eb8b5078db38249c5c60ec511c35c6 said, Mark Nudelman
(author of less) has given permission to utilize a generic 2-clause
BSD, so we remove it from WHITELIST_GPL-3.0 which caused
a QA Warning while INCOMPATIBLE_LICENSE += "GPLv3 LGPLv3 GPLv3+ LGPLv3+"
...
|NOTE: INCLUDING less as buildable despite INCOMPATIBLE_LICENSE
because it has been whitelisted
...
(From OE-Core rev: 712c4ccb0c5bede4f7199dabb5a75d0fabeb0564)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Various key parts of the core classes (for example, do_package and
do_populate_sysroot) currently require file. As it's not possible to build a
file-native without invoking do_populate_sysroot mark file-native as
ASSUME_PROVIDED and expect to use the host's binary.
(From OE-Core rev: d92a29bf279d3e96aa6cebf88a8fd94b52fc59eb)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The Xorg server needs to load the GLX extension in order to
enable proper OpenGL support.
* Before this patch, glxinfo aborted with:
root@qemux86:~# glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig
* After this patch, it works as expected:
root@qemux86:~# glxinfo | grep " render"
direct rendering: Yes
OpenGL renderer string: Software Rasterizer
(From OE-Core rev: 8f33627684755899c5b1fd7eeefdd89c42e68fec)
Signed-off-by: Carlos Alberto Lopez Perez <clopez@igalia.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The companion debug filesystem, enabled with IMAGE_GEN_DEBUGFS, was
creating the companion filesystem but was missing the code to actually
package it into a usable filesystem.
The code (and associated documentation) will allow the debugfs to generate a
companion tarball or other image.
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
changed upper case "X" to lower case "x"
(From OE-Core rev: ff8bf4907ff3b1a9c479fe158c31607da07f9b55)
Signed-off-by: Armin Kuster <akuster@mvista.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updates for distro_alias.inc. This should be pulled for jethro and
master branches.
(From OE-Core rev: 87e5a9866c31e7fa4c9eebb1d4b925d94cba5842)
Signed-off-by: Beth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was making deploy tasks MACHINE specific since they place output
into DEPLOY_DIR_IMAGE which contains MACHINE. On the plus side, this
was accidentally ensuring the output was placed for each machine,
on the downside it was triggering a rebuild every time for the different
checksum.
There is a better way to handle this which avoids the rebuild, see
the following tweak to do_deploy to mark it as MACHINE specific
in a different way.
(From OE-Core rev: 59800189690f887e6f3e8c3139fa6a404b76ac71)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The oprofile kernel dependency is a simple RRECOMMENDS, it therefore
doesn't have any interface constraints and doesn't need to rebuild
every time the kernel changes.
(From OE-Core rev: 0898361e4ca4b0c00d0470d130d24802f66c1064)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now the system supports virtual/xxx in SIGGEN_ variables, convert
this one to use virtual/libc instead of the hardcoded expansion which
is error prone.
(From OE-Core rev: d4a7a1b2d6bee1b6578cc7b56b6ca730ea453144)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sysroot paths (which happen to contain MACHINE) should not cause the signatures
to change every time MACHINE changes so exclude this from them.
(From OE-Core rev: 5f3773e84332e9100b8739adf4831269329e0033)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you currently do a DISTRO_FEATURES_remove = "x11" with OE-Core, you
see failures due to dependency problems. The work in resolving this was
partially completed a while back. This adds in the markup mainly for
gtk/gtk3+ recipes and means "bitbake world" will work successfully.
Rather than code the gtk/gtk+ specific distro features into each recipe,
a shared variable is used.
(From OE-Core rev: ef967c70182eeccb59c7511d838a7ecb0b2315c1)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
From Ross:
The http://www.apache.org/dist only keeps latest release, so use
http://archive.apache.org/dist, which keeps all the archives.
(From OE-Core rev: effc519e5cdc43d6c9411d13ab236c67c74f0ef5)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
webkitgtk 2.8.3 is provided instead and midori browser is replaced by epiphany in
separate commits.
(From OE-Core rev: 1a72dc9c44c7806c869c3b3afcd5d31bcf2da979)
(From OE-Core rev: 68a1e346751c4d644a14035b0d7acf01d212f38c)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The babeltrace command has plugins which it specifies in its link step
but on which (in the linker's view) it does not depend, so --as-needed
causes some of them to be omitted from the executable's dependencies.
This prevents babeltrace on OE-built systems from handling
streaming/live tracing sessions.
Babeltrace's makefiles already try to prevent this by using
--no-as-needed, but --as-needed gets placed afterward in the command
line, so it wins.
(From OE-Core rev: d3fc696bf1c0c5e9a0d238fb86e58771cfbe9cae)
Signed-off-by: Nathan Lynch <nathan_lynch@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc 5.X is now working in all the places we test it in, its been in
testing for quite some time. Time to make it the default (we have some
room in M4 for any other bugfixes). Its easy to switch back to 4.9, we
should really remove 4.8 at this point (to meta-oe?).
(From OE-Core rev: 039211f0d8fe79d07b65f2f02e299b9656034214)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes to what mirror we happen to fetch from shouldn't cause rebuilds.
(From OE-Core rev: 168f3d71bcfc9daa2984c21f35e2a2fdf754c57c)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No-update reasons and manual version checks should be in the recipes
themselves because otherwise they're prone to getting out of date.
(From OE-Core rev: b384345d9a693cbc3fd0dbeed9edd8c24618259d)
Signed-off-by: Alexander Kanavin <alexander.kanavin@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As was discussed in the commit which adds iw:
iw uses cfg80211/nl80211, which is the way of the future. wireless-tools uses
WEXT, which uses ioctl, which is in deep maintenance mode. See
http://wireless.kernel.org/en/developers/Documentation/Wireless-Extensions.
Also https://wireless.wiki.kernel.org/en/users/Documentation/iw indicates "The
old tool iwconfing, which uses Wireless Extensions interface, is deprecated
and it's strongly recommended to switch to iw and nl80211."
wireless-tools is kept as well for now for compatibility reasons, until we
have verified that all the network configuration mechanisms are using iw.
This adds VIRTUAL-RUNTIME_wireless-tools as a distro convenience.
(From OE-Core rev: 0c21e207537deb1c0290be631b4b7d84fba32842)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Similiarly to the other previous changes, add a missing allarch package dependency
for initramfs-framework on udev.
(From OE-Core rev: 00524d0c4449eb358dcf6c5a049a8f5371ddadee)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are dependencies that our allarch packages have in OE-Core that cause
those allarch packages to rebuild every time MACHINE changes.
With these changes, OE-Core allarch packages all have a common sstate
signatures and no longer rebuild.
(From OE-Core rev: 63bff90fa4fb4a95e8c79f9f8e5dd90ae1dfc69d)
(From OE-Core rev: 0b5e868d160faca041cda42b670066facd4db531)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Automatically spawning a devshell, rather than doing so on demand, is
questionable default behavior, and is potentially problematic in headless
builds. Further, there are problems with the patch resolver today. Default to
noop, and the user can always opt-in to use of the patch resolver by setting
PATCHRESOLVE to user.
(From OE-Core rev: 7964936dd1fb202373e58048c19a91d4b27cdfd6)
(From OE-Core rev: 4d8b993851d28909333d04166df592c8adc451aa)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If our libc doesn't support locales, we don't need gettext nls bits enabled.
(From OE-Core rev: f1bc8afa6ee584a81fb65bcf77e5ae1a8889f47c)
(From OE-Core rev: 8144069cd295fae67a7007a984e285c1a2a320e5)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The user's shell shouldn't be allowed to affect the build (and it can break
the flock command and possibly more, if the user's shell isn't POSIX
compliant).
(From OE-Core rev: fc5e1cfcc3ab7acfb6e7e12cb2cf7fa4699ae7b3)
(From OE-Core rev: 43a2baf26dad4b7b2f0e4c6af3ea4a611cee7ad5)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using OE-Core only we miss this define and its now used in recipes
like os-release, which goes undefined and when booting we see messages
like
Welcome to ${DISTRO_NAME} nodistro.0!
This would change to
Welcome to OpenEmbedded nodistro.0!
Remove all trailing whitespaces while touching this file
(From OE-Core rev: cf2383a63975ac7a51729a313fe0a52b559d2c61)
(From OE-Core rev: 394f0d61d1211a0562a3b4d9d78e8984abd3b28f)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Provide BASE_LIB settings for octeon* tunes that follow the practice of
mips64/mips64-n32 tunes (lib64 for N64 ABI, lib32 for N32 ABI).
(From OE-Core rev: 2b52312174e52886b0a978ece41f66b4fb455604)
(From OE-Core rev: 9531dbe2106d5ba5a9e7d66b3c640a98e4fb6ec4)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Octeon II/III binaries can contain instructions that are not compatible
with MIPS64 processors. Thus Octeon II/III packages should go to
separate directories. Set MIPSPKGSFX_VARIANT_tune-* to Octeon-specific
values and update PACKAGE_EXTRA_ARCHS_tune-* accordingly.
(From OE-Core rev: 69798449a8c1049728674dd352cf828063974cd0)
(From OE-Core rev: 3f16f76868105aae7c82ae33831d3317903b58ac)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since the qemu for aarch64 must use a virtual console for the second
serial port rather than emulating actual hardware, make sure the correct
device is specified so that a tty is actually started.
(From OE-Core rev: 5b720a69f0d181ab2de6032a6e3f5a0ee4a14302)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means we can use this as a test to enable certain autobuilder tests
such as testsdk.
(From OE-Core rev: dbfb2efcd7240a0a6a413f1b37c399b66fa79ca9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
qemu can freeze and stop responding if the socket buffer connected to a tcp
serial connection fills up. This happens of course when the reader of
the serial data doesn't actually read it.
This happened in the qemurunner code, because after checking for the
"login:" sentinel, data was never again read from the serial connection.
This patch solves the potential freeze by adding a thread to continuously
read the data from the console and log it. So it also will give a full log
of the console, rather than just up to the login prompt.
To simplify this patch, another serial port was also added to use for the
sole purpose of watching for the sentinel as well as being the interactive
serial port. This will also prevent the possibility of lots of debug
data on the console preventing the sentinel value from being seen due to
interleaved text.
(From OE-Core rev: 2da3fee6b6d9f4dd4c4cb529f4ba393c20aa0f13)
Signed-off-by: Randy Witt <randy.e.witt@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a multilib package depends on an allarch recipe that installs an
architecture-independent .pc file it will not be able to find the .pc file as
the recipe gets installed into the MACHINE sysroot but pkg-config looks in the
MLPREFIX-prefixed sysroot.
Solve this by extending PKG_CONFIG_PATH in multilib environments to include the
architecture-independent path in the MACHINE sysroot
(sysroots/MACHINE/usr/share/pkgconfig/).
(From OE-Core rev: 6a6dd4eb53dbf8a0c31ac2d68af5befebe727596)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- git'ify the OE patches
- add_resource_h_to_wait_h.patch - dropped, we do not support that old
perf anymore
- mips-rld-map-check.patch - Dropped because binutils is fixed for it
see https://sourceware.org/ml/binutils/2011-12/msg00112.html
- initgroups_keys.patch - Folded into
0026-eglibc-Forward-port-eglibc-options-groups-support.patch
Change-Id: Ib8e731b212f52b8ff12e2180babbc19970fb1ef1
(From OE-Core rev: 6ea08396dbb628140fd3289fc9fb19df97914326)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Include by default all the files needed to perform checkpkg task.
These files are copied from meta-yocto because they refers recipes in
oe-core, the only missing file are maintainers.inc because it needs
consensus between OE-Core and Yocto project to define a common set of
maintainers.
[YOCTO #7895]
(From OE-Core rev: 973f898e15cf6d1b6715d08da9dc740ee040e0dc)
Signed-off-by: Aníbal Limón <anibal.limon@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If security_flags.inc is 'required' to the image, -pie and -fpie options
are added to CFLAGS. These are not compatible with -shared GCC option.
The result is several errors of following form and missing Python3
modules in the image:
*.o In function `_start': *.S undefined reference to `main'
collect2: error: ld returned 1 exit status
(From OE-Core rev: 94818c5240b793464700945d0cf057bffb9e1008)
Signed-off-by: Topi Kuutela <topi.kuutela@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently MIPS64 N32 is broken. There is internal disagreement
between TARGET_ARCH (which doesn't contain ABIEXTENSION) and
TRANSLATED_TARGET_ARCH (which contains ABIEXTENSION). ABI is already
encoded into the TARGET_OS. ARM tunes in the same situation override
neither the TARGET_ARCH nor the TRANSLATED_TARGET_ARCH. So let's drop
this override.
(From OE-Core rev: 3ee5c9ad302bc05c75badbe29dd983a043a114c2)
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Being able to build a nativesdk gcc is useful, particularly in cases
where the host compiler may be of an incompatible version (or a 32
bit compiler is needed).
Sadly, building nativesdk-gcc is not straight forward. We install
nativesdk-gcc into a relocatable location and this means that its
library locations can change. "Normal" sysroot support doesn't help
in this case since the values of paths like "libdir" change, not just
base root directory of the system.
In order to handle this we do two things:
a) Add %r into spec file markup which can be used for injected paths
such as SYSTEMLIBS_DIR (see gcc_multilib_setup()).
b) Add other paths which need relocation into a .gccrelocprefix section
which the relocation code will notice and adjust automatically.
This patch adds tweaks to the relocation script to handle the
new section too.
(From OE-Core rev: cd3d874fced2ee4c950d9964d30c0588fd8772e7)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With gcc 5, we need to disable the PIE flags for more recipes in order
to have successful builds.
(From OE-Core rev: ec2f1b5af102ab6a8fcc23bf115c8f0451ab7eb8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the libc-headers to match the 4.1 LTSI kernel version.
We also tweak the logic in linux-libc-headers.inc to look in the
4.x subdirectory if a 4.x kernel is specified as the header source.
(From OE-Core rev: 3143920c541b55b543b9dcc12b18af4e0e4b7ae1)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
OLDEST_KERNEL is invalid for aarch64, it didn't exist
back in our current version. Use a more recent version
for aarch64 to allow user mode qemu to work correctly.
(From OE-Core rev: 27149fb98fd9d5bba4e07d256a6a0b4921cf00a9)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Chris Larson points out in the bug, "BUILD_ARCH changing doesn't change
native/cross sstate checksums, because its calculated in ${@}, so just its
unexpanded form is in the signature. But BUILD_ARCH ends up included in the
sstate filenames, so changes to BUILD_ARCH will result in rebuilds of
native/cross but not rebuilds of the target recipes which depend on
them, which is just what we want."
However it does mean we can't easily test 32 and 64 bit signatures. In order
to make the tests work, we need to add BUILD_ARCH to the HASHBASE whitelist.
BUILD_ARCH is used in the workdir paths and so on so changing it does still
rebuild when we need it to.
With improvements to function dependency tracking, a dependency on SSTATE_PKGARCH
was also introduced causing problems for 32/64 bit build signature equivalence.
Since this is reflected in the sstate filenames, we can safely whitelist this too.
[YOCTO #5970]
(From OE-Core rev: 4f6636be97e654c7f3d58e2649328b1dde8ef696)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If -D_FORTIFY_SOURCE=2 is included in CFLAGS for debug builds,
many warnings will be generated and some packages will fail to
build. So, only conditionally include it.
(From OE-Core rev: 1b576012a6a2b2ebc2c507cdaebd62174810b191)
Signed-off-by: Joe Slater <jslater@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use i686 as TARGET_ARCH for 32bit core2 (and corei7 and atom) builds.
In most cases, i586 and i686 are equivalent values for TARGET_ARCH, however
one important exception is glibc. When configured for i686, glibc enables
optimised string functions (SSE, SSE2, etc), which are not used when
building for i586.
The benefits of i686 optimised string functions vary depending on the
application and the CPU, however in some cases the improvements are
significant. In one test, a 50% increase in FPS was seen when running the
'smashcat' benchmark [1] in a qtwebkit browser on an Intel Atom based SoC.
The gain seems to comes from a 3x improvement in memcpy performance when
copying graphics buffer lines (5120 bytes, or 1280 x 4 bytes/pixel), from
the CPU to GPU. Note that very large memcpy's (e.g. 32MB) on the same
machine show no particular performance increase between i586 and i686.
[1] http://www.smashcat.org/av/canvas_test/
Warning: The change in TARGET_ARCH means that _i586 architecture specific
over-rides will no longer take effect. Both oe-core and meta-oe have been
updated to replace _i586 over-rides with _x86, however other layers may
still need review and updating.
(From OE-Core rev: dd09fab685de2eaf04aa5ab60f8220b89c1deae9)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* my previous thumb related commit:
commit 3e760031f91fb87c3e2f62b77a117eb41164f259
Author: Martin Jansa <martin.jansa@gmail.com>
Date: Wed Feb 18 15:40:35 2015 +0100
feature-arm-thumb.inc: respect ARM_INSTRUCTION_SET when adding thumb
suffix
unfortunately removed conditional on "thumb" in TUNE_FEATURES, when
setting ARMPKGSFX_THUMB
* in case we have MACHINE without "thumb" in TUNE_FEATURES and distro
setting ARM_INSTRUCTION_SET to "thumb" we end with:
ARM_INSTRUCTION_SET="thumb"
ARM_THUMB_OPT="thumb"
ARM_M_OPT="thumb"
# TUNE_CCARGS correctly not adding -mthumb
TUNE_CCARGS=" -march=armv7-a -mthumb-interwork -mfloat-abi=softfp -mfpu=neon"
# but ARMPKGSFX_THUMB and TUNE_PKGARCH including "t2":
ARMPKGSFX_THUMB="t2"
TUNE_PKGARCH="armv7at2-vfp-neon"
# causing following error:
Error, the PACKAGE_ARCHS variable does not contain TUNE_PKGARCH (armv7at2-vfp-neon).
(From OE-Core rev: 951200673af27538beaef647a33308b4f15d1fb0)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This tune file is needed to enable a GAS option specific to this cpu family
in order to disable the usage of lock prefix instructions.
(From OE-Core rev: 7eb0abc5f4d971d9a511c93cfb2eb52b72e6f228)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Rather than just use d.getVar(X), use the more explict d.getVar(X, False)
since at some point in the future, having the default of expansion would
be nice. This is the first step towards that.
This patch was mostly made using the command:
sed -e 's:\(getVar([^,()]*\)\s*):\1, False):g' -i `grep -ril getVar *`
(From OE-Core rev: ab7c1d239b122c8e549e8112c88fd46c9e2b061b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The following over-rides were both defined twice:
SECURITY_CFLAGS_pn-grub-efi-x86-64-native
SECURITY_CFLAGS_pn-ltp
(From OE-Core rev: dfae10889ab0fce2bae94294a78f4ea0aaf1b81e)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add license file XFree86-1.0 which is needed by packages such as hwdata.
It is from:
http://www.x.org/archive/X11R7.5/doc/LICENSE.html#AEN28
And add 'XFree86-1.0' to SRC_DISTRIBUTE_LICENSES.
(From OE-Core rev: be91551041c623e7e9b34780cc6322f898f8cf7f)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changes due to new combined support for both vmdk and vdi files.
(From OE-Core rev: e4244af33888ef3c39e31ed89c5184f6a4c5e80c)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Increase OELAYOUT_ABI: this is required because the
xf86-video-modesetting package moves from its own recipe to
xserver-xorg and sanity check cannot handle that currently.
The upgrade will delete old xf86-video-modesetting files from
sysroots.
* Remove upstreamed xserver-xorg patches
* Remove xf86-video-modesetting recipe: the driver is now included in
xserver-xorg recipe, which now produces the xf86-video-modesetting
package. The package version changes from 0.9 to 1.17.1
* Update xserver-xorg license checksum: modesetting license
info (another MIT one) has been added to the file
(From OE-Core rev: 950846d019ffac21909a96d90af8cf7e5bdd5738)
Signed-off-by: Jussi Kukkonen <jussi.kukkonen@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Otherwise, if MACHINEOVERRIDES is expanded before SOC_FAMILY is set
(which may happen as MACHINEOVERRIDES is included in OVERRIDES) we can
see:
ExpansionError: Failure expanding variable MACHINEOVERRIDES, expression was
${@['', '${SOC_FAMILY}:']['${SOC_FAMILY}' != '']}p1022ds
which triggered exception SyntaxError: EOL while scanning string literal (MACHINEOVERRIDES, line 1)
To avoid this, give SOC_FAMILY a default empty value so it doesn't
get read as None.
(From OE-Core rev: dee005b6e1bc353230f9f27a469b2054a644e542)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It was pointed out that people couldn't easily see who used this or
why so add some comments about that.
(From OE-Core rev: 67f09e9086b8fb1c0c8a1dd19419afb1a5af8daf)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Use immediate expansion for BUILD_ARCH and BUILD_OS since there is no
point in repeatedly calling os.uname() throughout parsing. This is
worth around 2% of parsing time, small but measurable.
(From OE-Core rev: 03482382b797f3501c3fb0df0fe12bd4e5e51a39)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of hard-coding the set of features that can be considered in
COMBINED_FEATURES, simply generate the intersection of DISTRO_FEATURES and
MACHINE_FEATURES.
(From OE-Core rev: a66f812d4395dc27e22d0c99568aed0a6493df12)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
PRINC is no longer needed since we have the PR service instead
which people should be using. Drop the PRINC code.
This has been deprecated with a warning and then an error for quite some
time so we can remove it now.
(From OE-Core rev: a4d530bcf55f03258078c10a123e2717444e1060)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With poky-lsb (security flags enabled), python-numpy doesn't build
with pie flags.
(From OE-Core rev: d4694ac5e18db1d0db314d0d8b1104c073037a60)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If bluez4 is not explicitly passed as a
distro feature, bluez5 should be used as
the default, so backfill it.
(From OE-Core rev: ae2d2fbafab638fa6c2496a836c8d00529a40d83)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There are several entries here which are not needed with the
modern license handling code:
gcc-source - moved to direct handling in base.bbclass
(due to version appended to the name)
libgcc - Listed as GPLv3 exception for its packages
libgcc-initial - Listed as GPLv3 exception
gcc-runtime - Indivisual packages listed as GPLv3 exception where appropriate
(From OE-Core rev: 48c4922ab921a1bb2103cc331d0839febd36beb8)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This means you can have one gcc version for some gcc recipes
(e.g. crosssdk/nativesdk) and another gcc version for target code.
Also remove the preferred version entry from the default toolchains
list since the version issue is now handled automatically.
We also need to specifically handle gcc-source in the license handling
code since expanding ${PV} in the base class isn't possible. Since
gcc-source doesn't generate any packages directly this shouldn't be
an issue and whitelisting in this way is easiest (and matches the
rest of the toolchain handling).
(From OE-Core rev: 67db7182faf6742b0d971d61d8c5ba34f69d2e12)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It supports it, so lets enable it even though
we can compile lot of stuff without NLS but its
harder to get them all compiled without NLS
Change-Id: I49a06c05b004654dabbef980c4e6ad991d581341
(From OE-Core rev: 6cf978dfcc90632680db15b58f8f9edbbd7c083b)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no reason to build sed for the host, however now:
ERROR: Nothing RPROVIDES 'sed-native' (but virtual:native:/OE/sources/openembedded-core/meta/recipes-extended/groff/groff_1.22.2.bb RDEPENDS on or otherwise requires it)
(From OE-Core rev: 5111407cfe59bd368e2528d953282b74d78057ed)
Signed-off-by: Dmitry Eremin-Solenikov <dmitry_eremin@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The error messages look like this:
R_ARM_TLS_LE32 relocation not permitted in shared object
(From OE-Core rev: a915adfd1eaad9a0d65dffe9da92811284e491c8)
Signed-off-by: Denys Dmytriyenko <denys@ti.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Remove the following patches since they are already in the new code:
binutils/fix-pr15815.patch
binutils/fix-pr16428.patch
binutils/fix-pr16476.patch
binutils/fix-pr2404.patch
binutils/replace_macros_with_static_inline.patch
binutils/binutils_CVE-2014-8484.patch
binutils/binutils_CVE-2014-8485.patch
binutils/binutils_CVE-2014-8501.patch
binutils/binutils_CVE-2014-8502.patch
binutils/binutils_CVE-2014-8502_1.patch
binutils/binutils_CVE-2014-8503.patch
binutils/binutils_CVE-2014-8504.patch
binutils/binutils_CVE-2014-8737.patch
* The file src-release is gone.
* Updated patches for the new code.
(From OE-Core rev: a8446ea78daa5875de43eb5bcccd8f536ea07e1c)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Conflicts:
meta/conf/distro/include/tcmode-default.inc
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We update the toasterconf.json for the 1.8 "fido"
release.
A small update to the release help text in the
toasterconf.json file shipped with the
openembedded-core layer.
We now make explicit that Toaster will build with
the tip of the selected branch, and we add links
to the OpenEmbedded repository.
(From OE-Core rev: f5af78cabb693692fa369730af4b0c70cca9bc91)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes we need to override the gdb from third party
tool SDKs, this helps out, moreover it also makes it consistent
with in OE-Core too to have multiple versions of gdb if we ever
needed to
Change-Id: Ibe1ae59175984bbc661c243764c81cd99fef54d1
(From OE-Core rev: aa75579aae064f2f9fc70bea093a6e9c8ca9c528)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The past few weeks ftp://ftp.gnu.org has been intermittently giving errors like this:
WARNING: Failed to fetch URL ftp://ftp.gnu.org/gnu/emacs/emacs-23.4.tar.gz;name=tarball, attempting MIRRORS if available
ERROR: Fetcher failure: Fetch command failed with exit code 4, output:
Cannot parse PASV response.
accept: Connection timed out
Cannot parse PASV response.
Error in server response, closing control connection.
Which is annoying because binutils lives there. Using http://ftp.gnu.org hasn't given any problems so far.
(From OE-Core rev: 25fe8d95298a457e828190412d7148470edc5592)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The error-report tooling command-line options were changed and anyone doing
automated builds and using error-reports needs to know what options to parse.
(From OE-Core rev: 99f209a49a4390192b95184ff86bd6f973010111)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These recipes both fail to build with "relocation R_X86_64_PC32 against
undefined hidden symbol `__init_array_start' can not be used when making a
shared object" when using PIE.
(From OE-Core rev: 37e6e62f0faae3fa16421b051599aea0e03a5825)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If you create a build directory with poky, or set DISTRO to "poky" and
run bitbake, you'll get a bblayers.conf file with LCONF_VERSION set to
6. If you then set DISTRO to any other value where the new distro config
doesn't pull in poky's config, e.g. "nodistro", you would then get a
bblayers.conf version error which didn't immediately make sense. (The
layer versions have been out-of-step ever since meta-yocto-bsp was
split out of meta-yocto several years ago).
This is just painful and we'd rather users didn't have to deal with
it. Obviously it isn't an OE-Core problem per se, but a simple way to
resolve it for everyone is to bump OE-Core's version to 6 with an
automatic no-op upgrade. Also ensure that multiple upgrade functions
(such as the poky one) have a chance to execute by not breaking out of
the loop as we were before.
Fixes [YOCTO #6139].
(From OE-Core rev: 2fdeee2fad69445b0d97148826c7b027820be63a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
- Based on Paul Eggletons work to partially upgrade to Python 2.7.6
Modified:
default-versions.inc: switched to python 2.7.9
generate-manifest-2.7.py: fixed _sysconfigdata
python-2.7-manifest.inc: fixed _sysconfigdata
python.inc: Updated checksums and source, no LICENSE
change just updated some dates
python-native_2.7.3 -> python-native_2.7.9 and updated patches
python_2.7.3 -> python_2.7.9, and added ac_cv_file__dev_ptmx=no
ac_cv_file__dev_ptc=no in EXTRA_OECONF to solve python
issue #3754, only needed when cross compiling, also updated patches
use_sysroot_ncurses_instead_of_host.patch: New patch to use ncursesw
from sysroot instead of hosts, introduced by fix for python issue #15268
Rebased:
01-use-proper-tools-for-cross-build.patch
03-fix-tkinter-detection.patch
05-enable-ctypes-cross-build.patch
06-avoid_usr_lib_termcap_path_in_linking.patch
avoid_warning_about_tkinter.patch
builddir.patch
fix_for_using_different_libdir.patch
host_include_contamination.patch
multilib.patch
nohostlibs.patch
search_db_h_in_inc_dirs_and_avoid_warning.patch
Deleted (fixed on upstream):
06-ctypes-libffi-fix-configure.patch
CVE-2013-4073_py27.patch
gcc-4.8-fix-configure-Wformat.patch
json-flaw-fix.patch
posix_close.patch
pypirc-secure.patch
python-2.7.3-CVE-2012-2135.patch
python-2.7.3-CVE-2013-1752-smtplib-fix.patch
python-2.7.3-CVE-2014-1912.patch
python-2.7.3-CVE-2014-7185.patch
python-2.7.3-berkeley-db-5.3.patch
python-fix-build-error-with-Readline-6.3.patch
remove-BOM-insection-code.patch
remove_sqlite_rpath.patch
python2.7.3-nossl3.patch
[YOCTO #7059]
(From OE-Core rev: d4ad95f0d5f08891637c644e85b09da9c4585059)
Signed-off-by: Alejandro Hernandez <alejandro.hernandez@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is no good reason not to use ext4 at this point, it has advantages
and few drawbacks. Therefore switch the qemu machines over (and the default
runqemu script options).
(From OE-Core rev: 430b9ae71b1aa76f8421127d17e0e0723d4818d3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add a variable that allows us to map the OE-Core layer to the name that
represents it in the OpenEmbedded layer index. This will be used by
bitbake-layers layerindex-fetch so that it knows that for example
OE-Core is already fetched and included in the current configuration.
Note - it won't be required for us to go around and set this for every
layer - we can do the matching based on repo and subdirectory, but
OE-Core is somewhat special in that it does sometimes appear in
different places, for example in poky.
[YOCTO #5348]
(From OE-Core rev: d1cf0edd79ec3ba3bd17126183e4cb99aa50ffaf)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add BBLAYERS_LAYERINDEX_URL variable that bitbake-layers can use to find layer index.
Add BBLAYERS_FETCH_DIR variable that bitbake-layers can use to specify fetch directory.
[YOCTO #5348]
(From OE-Core rev: ae585a7d2744222606aeb533815d22ade8e10097)
Signed-off-by: Chong Lu <Chong.Lu@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Lets try to use musl version of libintl and see how far we get
Change-Id: I0259049eb6461ab9b579c7f3ad401fefede24621
(From OE-Core rev: 4ed94affbce657db58c5099c8882a8d0292abaf1)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* each DEFAULTTUNE with thumb enabled should list it's arm variants in
PACKAGE_EXTRA_ARCHS, otherwise packages which force arm ISA won't be
found in do_rootfs
* armv7athf-neon-vfpv4 was missing its own PACKAGE_ARCH and also the arm
variant
(From OE-Core rev: fd7f3cd9affbfb9ce483a5a1d6054da2365fcb0e)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* this means that recipes with ARM_INSTRUCTION_SET explicitly changed
to arm will be built in feed without thumb suffix, the same does apply
for workdir, e.g. after "bitbake glib-2.0" you can see:
tmp-glibc/work/armv5e-oe-linux-gnueabi:
glib-2.0 glibc glibc-initial
tmp-glibc/work/armv5te-oe-linux-gnueabi:
acl db gdk-pixbuf kmod ....
and
tmp-glibc/deploy/ipk:
all armv5e armv5te qemuarm
* feed config should be ok, because all default DEFAULTTUNEs always
include "arm" variants of all supported PACKAGE_ARCHs
* for more details see
http://lists.openembedded.org/pipermail/openembedded-core/2014-April/091960.html
the toolchain path issues were resolved in 1.8
* add ARM_INSTRUCTION_SET = "arm" to glibc-collateral.inc and comment in
glibc.inc to fix glibc-locale and glibc-scripts build
(From OE-Core rev: 3e760031f91fb87c3e2f62b77a117eb41164f259)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the libc-headers now that the kernel has released.
(From OE-Core rev: b3721560fe523c144690ebfeb203b3735d0f6843)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop CVE backports and ppc/fpu detection patch which is not needed anymore
Forward port eglibc option groups patch
Default to using glibc 2.21
Additional patches needed to appease -Werror option
Change-Id: I1873097cec8387ea9e8186a255122938fc28c976
(From OE-Core rev: 6617cc92076764d51f0190786f8d62b8c99ae984)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bitbake will currently 'selecting bluez4 to satisfy runtime
libasound-module-bluez due to PREFERRED_PROVIDER_bluez4 = bluez4'
which in the case of bluez5 isn't correct.
This slightly unusual construct avoids this.
Ultimately this is a bitbake issue that needs fixing in
a better way but this means we can merge the bluez5 changes
until bitbake gets fixed.
(From OE-Core rev: ef41f4b91d65f87850edd6cc56ca37d2ecb56378)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If BlueZ5 is added to a build as a replacement for BlueZ4,
the provider for bluez-hcidump will be bluez5.
(From OE-Core rev: 11354dd5b8e4a6005dff6d52eeb7aae59a9c3ac3)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update the config section of the meta/conf/toasterconf.json file
to set the default project variables as in meta-yocto/conf/toasterconf.json
[YOCTO #7248]
(From OE-Core rev: eea9ada645ea5f17cf2e0f2a89a790c26ad27e9d)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It turns out that changing WARN_QA and ERROR_QA results in do_configure's QA
postfunc re-executing, so changing a QA test results in a complete rebuild.
This is just too much and the lesser evil of needing to do a full rebuild to
verify changed QA flags is preferable to an enforced full rebuild.
This reverts commit daecfc3438122b5d146a59a5053e57006d55ccc4.
(From OE-Core rev: 4c5895da16de6f00148a0755b421f07223083d09)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The name 'opkg-arch-config' is much more descriptive.
(From OE-Core rev: d0cb4fb3aab1d6041f88fa564e5d745629316ae2)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Changing WARN_QA and ERROR_QA should cause do_package_qa to re-execute, so
removing them from the sstate hashes is harmful.
They were added back when sanity testing was part of packaging and this was the
lesser evil, compared to changing sanity tests causing a re-package of
everything.
(From OE-Core rev: daecfc3438122b5d146a59a5053e57006d55ccc4)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Disable PIE in expect as otherwise it tries to link the shared library as an
executable.
(From OE-Core rev: fe1f5c90eede593100fe57630d39cf329e59ef8f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In meta/conf/bitbake.conf, PKGDATA_DIR is default to:
PKGDATA_DIR = "${STAGING_DIR_HOST}/pkgdata"
But in meta/conf/multilib.conf, PKGDATA_DIR is set as:
PKGDATA_DIR = "${STAGING_DIR}/${MACHINE}/pkgdata"
When multilib enabled, linux-libc-headers cache will be machine
specific:
$ bitbake-diffsigs sstate-cache/1a/sstate:linux-libc-headers:ppce6500-poky-linux:3.17.7:r0:ppce6500:3:1a0c3934d91479fd7242a5b1d407d155_package.tgz.siginfo sstate-cache/28/sstate:linux-libc-headers:ppce6500-poky-linux:3.17.7:r0:ppce6500:3:28c918e8f9f4a4cfceb3a38b258f7501_package.tgz.siginfo
basehash changed from 8d3158bbddcee612fa30badd05f47b8e to 68ac258fc6c8e489f360fde3123a5894
Variable MACHINE value changed from 'b4420qds' to 'b4860qds'
(From OE-Core rev: c511f65a3ccfcbaabd2ba1d1c89be81498240a2b)
Signed-off-by: Ting Liu <ting.liu@freescale.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #7230]
In certain system configurations TRANSLATED_TARGET_ARCH will not
expand in the right order for gcc-cross-candian-mips64n32 to be
generated properly.
This will cause SDKs to fail to generate properly.
Changing the global definition of TRANSLATED_TARGET_ARCH always
expands the ABIEXTENSION, which causes the OVERRIDES to pick it up
as well. This effectively defines a new class of overrides for the 'n32'.
The side effect is that we need to duplicate some mips64 overrides, and
redefine others that were previously 'n32' or 'mips64' exclusive to have
the correct semantics.
(From OE-Core rev: 4b3a2b703b20583bd107f00a297d972e9bfb514a)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The extra space makes the overrides look like "foo:bar: thumb:foobar".
This may prevent thumb from working properly, and the space was never
intended in the original fix.
(From OE-Core rev: 330119da319a08c13ca3350270a95d66d18ffb94)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The sanitizer runtime library is dual-licensed under the NCSA
and MIT licenses.
Also make nativesdk-gcc-sanitizers use SDKGCCVERSION by default
instead of GCCVERSION
(From OE-Core rev: 4ed21998827060745d2858e2d6c121baf823e64a)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop PREFERRED_VERSION_elfutils in meta/conf/distro/include/
tcmode-default.inc, it builds the latest version by default.
(From OE-Core rev: 7ff30c54439a761d66fd4ceca80073e3653373bf)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
AddressSanitizer is a fast memory error detector.
ThreadSanitizer detects data races.
UBSanitizer detectes undefined behaviour.
All consist of compiler instrumentation and a run-time library.
The compiler instrumentation was already enabled, this builds
the run-time library component.
(From OE-Core rev: 1709bf0c3a84bb04bc52e9104ad8e09fba6c6f91)
Signed-off-by: Dan McGregor <dan.mcgregor@usask.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
[YOCTO #7143]
When the system is configured for a multilib SDK, such as:
require conf/multilib.conf
MULTILIBS = "multilib:lib32 multilib:lib64"
DEFAULTTUNE = "mips32r2"
DEFAULTTUNE_virtclass-multilib-lib32 = "mips64-n32"
DEFAULTTUNE_virtclass-multilib-lib64 = "mips64"
Only one of the mips64-n32 or mips64 toolchains is built. Causing the
other to be unavailable. This is due to both recipes ending up with the
same PN.
The toolchain uses the TRANSLATED_TARGET_ARCH in it's name, however the
target for mips64 and mips64 n32 were the same, causing the conflict.
Avoid this conflict by adding the ABIEXTENSION to the name.
(From OE-Core rev: 0bcc01121e928d0be7a0550e500425852c63cf98)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libaio when built with pie and fpie does not link correctly with blktrace or ltp
so we need to disable those flags until a better solution comes along.
(From OE-Core rev: 4fbf13a6c28fc1170a4defbf50032546a14eaa59)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: b985f32a38b3809ea7f34b5946ac8e22a73f2741)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
commit 3b3f7e785e279 [kernel: Rearrange for 1.8] began the process of
moving the kernel source and build artefacts out of sstate control and
into a shared location.
This changed triggered some workflow issues, as well as bugs related
to the kernel source containing build output, and hence being dirty and
breaking kernel rebuilds.
To solve these issues, and to make it clear that the kernel is not under
sstate control, we move the source and build outputs to:
work-shared/MACHINE/kernel-source
work-shared/MACHINE/kernel-build-artifacts
Where kernel-build-artifacts is the kernel build output and
kernel-source is kept "pristine". The build-artifacts contain everything
that is required to build external modules against the kernel source,
and includes the defconfig, the kernel-abiversion, System.map files and
output from "make scripts".
External module builds should either pass O= on the command line, or
set KBUILD_OUTPUT to point to the build-artifacts. module-base.bbclass
takes care of setting KBUILD_OUTPUT, so most existing external module
recipes are transparently adapted to the new source/build layout.
recipes that depend on the kernel source must have a depedency on the
do_shared_workdir task:
do_configure[depends] += "virtual/kernel:do_shared_workdir"
With this dependency added, the STAGING_KERNEL_DIR will be populated and
available to the rest of the build.
(From OE-Core rev: 6a1ff0e7eacef595738f2fed086986fd622ec32a)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since we normally fix the version of elfutils in tcmode-default, this
needs to be updated after we upgrade the recipe itself.
(From OE-Core rev: d2a70aaa1fea446b578a4d904d8d92a6eb16b6a5)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
arch-arm64 is the base tune file for aarch64. Update this to allow the
system to work with both aarch32 and aarch64 (multilib).
arch-armv8 is for compatibility, it simply uses the base config for now.
feature-arm-thumb was updated, since aarch64 mode does NOT have thumb support.
We should only be processing warnings and additional arguments if thumb
support is enabled on the processor core.
(From OE-Core rev: 03d2f5646485b565cc14a0009b7d5224ab298f4c)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add machine qemuarm64. The configure files are derived from linaro.
Update:
* rename genericarmv8 to qemuarm64 for coordination in oe-core
* include qemu.inc then remove common part of config
* disable using autoserial
* move arch-armv8.inc from machine/include/arm64 to machine/include/arm
[YOCTO #6487]
(From OE-Core rev: d7314c3bc804b7bcc921b0a6c5b63d71ca2e73db)
Signed-off-by: Kai Kang <kai.kang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Whilst we don't usually take linux-libc-headers point release, 3.17.3
fixes a userspace header issue which caused gdb to fail to build on
mips. We therefore may as well upgrade to the latest point release.
(From OE-Core rev: f08a67b451091fcdc84b6b8b1627a8c9589e0ef3)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The kernel source is being moved into the sysroot, to do this and
preserve previous builds, we need to change the TMPDIR ABI and
provide a function to uninstall all kernels from the sysroot.
This change adds code to do that and increases the ABI number.
(From OE-Core rev: 323f9ea99cff00a751e446286bf8bcf8756e4351)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
While wildcard in INCOMPATIBLE_LICENSE, such as INCOMPATIBLE_LICENSE =
"*GPL-3", PREFERRED_VERSION_db-native could have the correct value "5.%"
[YOCTO #5592]
(From OE-Core rev: fddca246f15ff72828a0198d8c4d3e58d8bf4442)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The whitelist processing in code in base.bbclass does not play well with
wildcards in INCOMPATIBLE_LICENSES. The code expects bad_licenses to
contain actual license names, not wildcards.
Add incompatible_license_contains to replace bb.utils.contains(
"INCOMPATIBLE_LICENSE", **, **, **, d)
[YOCTO #5592]
(From OE-Core rev: 3587653a8d8abc7cfed6a5c6ecfa72bee283e451)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
bluez-hcidump was a separate package in bluez4, but was integrated into
bluez5.
(From OE-Core rev: 0dcaea0fcf38f0e382eda11e74ded1daeb98a8ac)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was missing leading to gcc-source-<foo> being built when using gcc-cross-<bar> with GCCVERSION=bar.
(From OE-Core rev: fa249f347b3453537ee6aaea0d3bb75cfe7a75d1)
Signed-off-by: Koen Kooi <koen.kooi@linaro.org>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-source is a convenience recipe to save duplicate copies of the GCC source
tree and should be whitelisted for GPLv3 avoidance along with the rest of GCC.
(From OE-Core rev: fd58d0e920707198caf62ffef50b67c7c7882c69)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the code that uses BB_SIGNATURE_EXCLUDE_FLAGS uses d.getVarFlags() so doesn't
get to see the internal flags, remove _append and _prepend. Also defaultval is
now _defaultval and thus internal, so remove that too.
(From OE-Core rev: b53e06c8fc4a8183a2f8232c13931a39b1ca0e23)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows us to merge in the _defaultval changes.
(From OE-Core rev: 3de8689ad4aa97acd36a76dda36c96697e2ab712)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some minor changes to the names and descriptions
used in the Toaster configuration file:
* Change the name of the local layer source from Local OE-Core
to Local OpenEmbedded
* Change the imported layer source name from User Imported Layers
to just Imported layers. It is shorter, which helps table display
* Change the description of the master release from OE-Core
master to OpenEmbedded master
* Change the description of the dizzy release from OE-Core dizzy
to OpenEmbedded Dizzy
* Change the helptext of the dizzy release to remove the
"latest" reference, which can make maintenance hard
* Change the name of the Local Yocto Project release to Local
OpenEmbedded
(From OE-Core rev: 151475009fe8cd105ba3964cd9c23fe7b9af11a8)
Signed-off-by: Belen Barros Pena <belen.barros.pena@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recipe packaging for the target requires permissions that are consistent
with meta/files/fs-perms.txt which specifies certain user and group
names. In the early parts of a target build base-passwd is not yet
available to provide the target /etc files used for user/group lookup.
Allow pseudo to fall-back to the last-resort files it installs if the
target ones aren't there yet.
(From OE-Core rev: 071d364b7a758ba5e546bb18c5816ac4c2e6747c)
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In managed mode, Toaster creates project configurations
based on the layers that are being checked-out on disk.
The defaults are set through a JSON configuration
file that contains layer-specific specific information.
This patch adds toasterconf.json files for the oe core layer,
that make Toaster work with a standalone OpenEmbedded-Core checkout.
The toasterconf.json files describe basic configuration for Toaster
projects, including default layers, default configuration variable values,
toaster-compatible branches, and the layerindex URL
where the base layer and compatible layers.
(From OE-Core rev: 323b2d27598df8fe18892559e093ae7281e99918)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
getopt can be provided by either util-linux or busybox. Allow the
distro to control which implementation is used, and default it to
util-linux.
(From OE-Core rev: 218d5eb990011442d3b15e8fbb3e682af6bcbe92)
Signed-off-by: Richard Tollerton <rich.tollerton@ni.com>
Acked-by: Ken Sharp <ken.sharp@ni.com>
Acked-by: Ben Shelton <ben.shelton@ni.com
Acked-by: Brad Mouring <brad.mouring@ni.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Document some recently added tasks and variables.
(From OE-Core rev: f650d584bf446f5923a40ca9a39ddcbbf31bf886)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It is not entirely obvious that all reasonable configurations
will have multilib.conf strictly before the file which might
want to set MULTILIB_GLOBAL_VARIANTS. The x86-ish values here
look like reasonable default guesses, but shouldn't override
an explicit setting.
(From OE-Core rev: 2645c07892abe79f73379b1ca4196f593cb3b330)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Instead of replicating the logic for the host compiler naming from bitbake.conf,
use the BUILD_* variables directly.
Also change BUILD_CPP to use gcc -E (which native.bbclass previously used), as
some recipes (e.g. grub-efi) use ${CPP} with multiple input files, which gcc -E
can handle but cpp can't.
(From OE-Core rev: 9237d18964ff0bf76f5c37fca21ab3974d81d0d2)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The previous version could crash on dead links in the rootfs, or if the manifest directory did not
exist. The generated files were also not compliant with the SPDX specification, for example file
entries did not always start with the FileName tag, time stamps were incorrectly formatted etc.
Stability issues are addressed by added checks, originally written by Johan Thelin
<johan.thelin@pelagicore.com>, who never upstreamed them. I've also added an option for getting full
SPDX output from FOSSology, i.e. not only for all files, but for the package as well, including
license references. License refs are required in order to process the output by SPDXTools. For that
reason, this option defaults to true.
(From OE-Core rev: 5d3a4f4f57e4d8581fd88a14324f94e93104a690)
Signed-off-by: Tobias Olausson <tobias.olausson@pelagicore.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The db 6.0.30's LICENSE is 'AGPL-3.0', and db 5.3.28 LICENSE is
'Sleepycat'
While building rpm image with "AGPL-3.0" in ${INCOMPATIBLE_LICENSE},
db 6.0.30 and db-native 5.3.28 were built, the different versions
caused the rpm doesn't work on target.
...
root@qemux86-64:~# rpm -qa
|rpmdb: BDB2531 Unacceptable log file /var/lib/rpm/./log/log.0000000001:
unsupported log version 21
|rpmdb: BDB2527 Invalid log file: log.0000000001: Invalid argument
|rpmdb: BDB0061 PANIC: Invalid argument
|==> rpmdbe_event_notify(0x623f40, PANIC(0), 0x7fffee0fbc0c) app_private
(nil)
|rpmdb: BDB1546 unable to join the environment
|error: db_init:tmp/work/core2-64-poky-linux/rpm/5.4.14-r0/rpm-5.4.14/
rpmdb/db3.c:1144: dbenv->open(-30973): BDB0087 DB_RUNRECOVERY: Fatal
error, run database recovery
...
[YOCTO #6858]
(From OE-Core rev: e5a40391dfa12c44f31bdb7550df1275edda3864)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When using other toolchain layers, it does not pick
the OE-Core version eventhough not specified, its because
we did not pin it.
Change-Id: Ic47fd607a2a6535dd157d8afdd004197d2a6f60b
(From OE-Core rev: be1e7909abb1fc27087b2b99b183da260f9653af)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
(From OE-Core rev: de57a1ab92f975b020b9119e48c6cc8fc8393992)
Signed-off-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently linux-firmware rebuilds for each machine due to its usage of
update-alternatives which in turn means a dependency on opkg-utils.
Marking opkg-utils as ABISAFE is the only option we have right now
to avoid this.
(From OE-Core rev: 6829c0e161c4a8cde6624f211865922fce62d4fa)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently allarch recipes using useradd rebuild each time MACHINE
changes which is not desireable. Adding the useradd dependencies
to this list ensures they do not change under these circumstances.
(From OE-Core rev: 7743a309017f0fb9286f00b1f6f546ee95c05303)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Previously, when building core-image-minimal, the rootfs size would
default to 64M because we use '?=' in bitbake.conf and also '?=' in
core-image-minimal.bb.
The thing is, we'd like to have a default value for all images set
in bitbake.conf but still allow each image recipe to set its own default
value which could be overridden by users in local.conf.
(From OE-Core rev: 18f499df6bcbf79d7bd0a99c4c8693268683485f)
Signed-off-by: Chen Qi <Qi.Chen@windriver.com>
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
glibc 2.20+ wont support any older than that
(From OE-Core rev: 32b3a9ca554d9ff8f3b9c2ff62cc66ee865c61bf)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Updating the linux-libc-headers to the 3.16 release. This matches the
current -dev kernel version, and is compatible with the existing
named kernel versions (3.10, 3.14).
(From OE-Core rev: 7246d62406acf862d3c79e6f615e0c595d46845e)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU is capable of emulating four different VGA adapters: cirrus, std, vmware,
and QXL. By adding the cirrus and fbdev X.Org drivers to the qemux86-64 image,
the image can be made to launch an X server on when cirrus and std are chosen,
in addition to just vmware. (The build of QEMU in OE-Core appears to have QXL
disabled, meaning a driver for it is unnecessary.)
The runqemu script now allows the choice of emulated VGA adapter to be
specified manually, so it's important that qemux86-64 supports any configuration
the user might choose without requiring the image to be rebuilt.
(From OE-Core rev: 1216de77a7f23fa10e34aee1ebe27fcc6a6589c0)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU is capable of emulating four different VGA adapters: cirrus, std, vmware,
and QXL. By adding the cirrus and fbdev X.Org drivers to the qemux86 image,
the image can be made to launch an X server on when cirrus and std are chosen,
in addition to just vmware. (The build of QEMU in OE-Core appears to have QXL
disabled, meaning a driver for it is unnecessary.)
The runqemu script now allows the choice of emulated VGA adapter to be
specified manually, so it's important that qemux86 supports any configuration
the user might choose without requiring the image to be rebuilt.
(From OE-Core rev: 9e4ca6739d65716fcb0a1b7d635749083da98c52)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Might as well move this default to the class which uses it allowing
for easier reading/understanding of the class.
(From OE-Core rev: 177aec177306e68bcd822dee6b29a7efbd558a91)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently its near impossible for other classes to sanely override
this value with their own default. By setting a weak default we can
allow other classes to change the default and allow end recipes to
again override this.
As far as I can tell, there shouldn't be any regressions from this
change.
(From OE-Core rev: 12b2a73d336d66596939eae5c9947d4054c0316e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The MIPS emulation for qemumips actually supports
mips32r2:
isa : mips1 mips2 mips32r1 mips32r2
We should probably use that tuning file.
This implicitly changes the default value of DEFAULTTUNE to
mips32r2.
(From OE-Core rev: 5d64516d81750e4e0d65792a3215568d652bec6c)
Signed-off-by: Peter Seebach <peter.seebach@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
A few native scipts requires bash-native, and we don't build
bash-native, so add it to ASSUME_PROVIDED.
(From OE-Core rev: 283a418a838ef285988a5ffc3888501ca7de63f1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the specific scripts and mtrace versions to the preferred version list.
(From OE-Core rev: 6fa356c6a808a4876e23722ab86b80a4c6bd072d)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* update-rc.d now adds initscripts dependency even to allarch recipes
making them effectively TUNE_PKGARCH, "fix" it by excluding
initscripts from all signatures
(From OE-Core rev: 4321c553d5ae816e566234e981a0815bba046d39)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As the do_package_write() task is listed as deleted, remove the few
remaining references.
(From OE-Core rev: 201d572ab5c57cda1b332356a3b7711bc346696e)
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Sometimes, binutils-crosssdk needs to be override,
like is the case for producing Darwin cross SDK.
(From OE-Core rev: 8e4dc3da0662063579ac7ebe01cc09dc883e91e0)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Without this, you are not able to use mips32r2 on a mips64 based tune.
We want to be able to do a tri-lib system of mips64, mips64-n32 and mips32r2.
(From OE-Core rev: ccacfd3460b47494f687c696ff985b7c1c6ca1cd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The initrd image used by the Linux kernel is list of file system images
concatenated together and presented as a single initrd file at boot time.
So far the initrd is a single filesystem image. But in cases like to support
early microcode loading, the initrd image need to have multiple filesystem
images concatenated together.
This commit is extending the INITRD variable from a single filesystem image
to a list of filesystem images to satisfy the need mentioned above.
(From OE-Core rev: b0ac481dda99d8f4be8015964fcb2cb01afce08c)
Signed-off-by: Nitin A Kamble <nitin.a.kamble@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When adding patches or config files from bbappend files, it requires
the use of FILESEXTRAPATHS, which has been an issue and failure point
for people starting to work with bitbake and oe-core.
We add checking to standardize how to use FILESEXTRAPATHS. Only the
format of:
FILESEXTRAPATHS_append := ":${THISDIR}/Your_Files_Path" or
FILESEXTRAPATHS_prepend := "${THISDIR}/Your_Files_Path:"
is acceptable.
[YOCTO #5412]
(From OE-Core rev: 69e083237e632f7d84a7b218dd12d1a5ad95a229)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, BB_NUMBER_THREADS and PARALLEL_MAKE default to unset and
are set in local.conf. Now that we have the automatic probing,
the default values can be set in bitbake.conf and an example of
explicitly defining how many tasks to run can be moved to
local.conf.sample.extended.
[YOCTO #6217]
Signed-off-by: Roxana Ciobanu <roxana.ciobanu@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that all licenses are canonicalised to SPDX names when processing, we need
to rename the whitelists to the match.
[RP: Fixed up multilib.bbclass too]
(From OE-Core rev: 5b6cdac26e35e9a3b8b09185fc16765fa99dfe5f)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
About the config files (docbook-xsl.xml), we refered what Ubuntu 13.04 did,
so the xmlto could correctly search the xsl stylesheets.
[YOCTO #2416]
(From OE-Core rev: f5554492c80c69ba9b34dbf206a7c748ab8f1fb6)
Signed-off-by: Hongxu Jia <hongxu.jia@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting PREFERRED_VERSION to the latest version available is redundant, so
remove it.
(From OE-Core rev: c5941aa91655042d9d4df574a3e1ee33d5d3825a)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Check the rootfs size against IMAGE_ROOTFS_MAXSIZE (if set)
* Add comments for IMAGE_ROOTFS_SIZE to not confuse with IMAGE_ROOTFS_MAXSIZE
[YOCTO #2610]
(From OE-Core rev: 6acd4fc8d5e642b5c6c75fcc40dd8f37caf7ddcf)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
pkglibexecdir is a fairly common location for package-specific binaries (in
automake this is $libexecdir/$PACKAGE), and binaries in there are already
installed to FILES_PN, so add the corresponding .debug directory to
FILES_PN-dbg.
(From OE-Core rev: 4d3ffde4649ed116a1c21afef41f71bfe1d471de)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For most users this commit will have no effect. But if you come across the idea of giving
different names for paths, you'll get some troubles.
When a recipe inherit native, properly define bindir, sbindir, includedir, sysconfdir, datadir
(using xxxdir_native definitions from meta/conf/bitbake.conf).
For example, edit "${BASE_WORKDIR}/${MULTIMACH_TARGET_SYS}/quilt-native/temp/log.do_configure"
and see what are the arguments given by oe_runconf.
Notice that ${docdir}, ${mandir}, ${infodir}, ${localstatedir} have no associated _native definition.
(From OE-Core rev: 15345ddd4be6a0b041b3d6caaad48d46b22142e9)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The QEMU_OPTIONS variables belong in qemu.bbclass so move them there. The
only users of them inherit qemu.bbclass. There is no point in pushing
these into every recipe.
(From OE-Core rev: 5824293de37919e89f60192836997281933e23d6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently, qemuppc prints warnings about gdk-pixbuf postinstalls
not working due to illegal instructions. This is due to qemu
running with the wrong cpu type. Add an option for ppc7400 so
that qemuppc works correctly.
(From OE-Core rev: 5995fdbe81799f1ecf5de722cb2eb95ccb2aa860)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable is a left-over from early glibc recipes.
It is not referenced anymore in oe-core, and its functionality
has been replaced with 'GLIBC_GENERATE_LOCALES'.
Also remove the reference to it in local.conf.sample.extended.
(From OE-Core rev: d668245991d1369e2906d1605c749c62274c0620)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To unpack that to more than a single line: -native and -cross recipes are made
to use the dummy Texinfo utilities provided by texinfo-dummy-native if they
invoke those utilities at build time. The target-architecture (cross-compiled)
recipes still use the genuine Texinfo utilites. Right now, they still use
the host system's Texinfo utilities, but could be made to use the
texinfo-native recipe we already ship with some config file changes.
(From OE-Core rev: 160087f754eabf5da90fb51997e19d2e585aac4a)
Signed-off-by: Max Eliaser <max.eliaser@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If we don't do this, we see an exception:
ERROR: Failure expanding variable MACHINE_ARCH, expression was ${@[d.getVar('TUNE_PKGARCH', True),
d.getVar('MACHINE', True)][bool(d.getVar('MACHINE', True))].replace('-', '_')} which triggered
exception AttributeError: 'NoneType' object has no attribute 'replace'
Setting a default value avoids this error and allows the sanity checker
to trigger instead.
(From OE-Core rev: 106e9a3f594658b6a207f1f29bd4007616cc31d6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
With this we could use TCLIBC=musl to switch to images
based on musl
(From OE-Core rev: 797ef28c55a30f1b465ce512fffa4e06c7f1c658)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* Set default to http://search.cpan.org/CPAN/, as it should be
(From OE-Core rev: 7cf349c3f1f195d529fbd73ce4bf63a439ffa4e6)
Signed-off-by: Tim Orling <TicoTimo@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Kernel and initramfs built and tested on GCW Zero (jz4770)
(From OE-Core rev: 149885560e2fbc91c7f60226d015ba9842373e26)
Signed-off-by: Andrea Adami <andrea.adami@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* The SRC_URI is not accessible.
So need to add mirror site referred by the original site.
* The problem is that
http://download.savannah.gnu.org/releases redirects to closest mirror
and few mirrors (e.g. .jp) weren't working correctly while
http://download-mirror.savannah.gnu.org/releases/ seems to be reliable.
* Add SAVANNAH_GNU_MIRROR and SAVANNAH_NONGNU_MIRROR variable in bitbake.conf.
* Change the SRC_URI using the new variable.
(From OE-Core rev: af00b6544f60e4d7581f9d9767f9d3f574392359)
Signed-off-by: Changhyeok Bae <changhyeok.bae@lge.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Also drop an obsolete gcc-cross-intermediate reference.
(From OE-Core rev: d807e87708d5e4dc9267aa1611ba7ad7beec1d40)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Recently we renames the cross compilers as well as spun out
libgcc-initial from gcc-initial out. We need to also express
it in default tcmode otherwise defining GCCVERSION and/or BINUVERSION
outside OE-Core does not cover all cases
(From OE-Core rev: 82813d27640549255dc81a15d7fb63688431f747)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc-cross technically depends on the C library however we can use
one toolchain for multiple different tunes within a given architecture.
Manually remove these dependencies so that gcc-cross isn't rebuild with
every tune change.
(From OE-Core rev: 97df4e8e61a7693d548c3145e36f1d5503e91d03)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We should be explicit about the providers for the SDK toolchain so
add entries to do this.
(From OE-Core rev: fba380a2a37f04de04c0626c0a09cfe757c24341)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The metadata started using the bb.utils.contains_any which has been
add in the BitBake 1.23.0 release, set this as the minimal version to
ensure parsing compatibility.
(From OE-Core rev: dea40c2850a32b5b67e90336f9565889f92dabe8)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Update PREFERRED_PROVIDERS after cross tooling name change to include PN.
Also drop the now obsolete gcc-intermediate which no longer exists.
(From OE-Core rev: 5cbb5c12a5656915c3c9752187b54ef095d42828)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows them to co-exist together in the native sysroot, with one
set of cross tools per target architecture.
(From OE-Core rev: a2c5509520d5c3e082f55844e6545d0309565f8f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* there is issue for TUNE_PKGARCH missing in PACKAGE_ARCHS for machines
without thumb enabled, it was reported by Jacob Kroon on IRC
(From OE-Core rev: 1e1b42f687b5cd34623fe2682218958e1947eb92)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
If a recipe does not explicitly set ARM_INSTRUCTION_SET, then there is no
need to throw a warning:
WARNING: Recipe 'foobar' selects ARM_INSTRUCTION_SET to be 'None',
but tune configuration overrides it to 'arm'
(From OE-Core rev: e457d71641af8802e47eb4854072e3cfb957b001)
Signed-off-by: Jacob Kroon <jacob.kroon@mikrodidakt.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* it will be inherited by most DEFAULTTUNEs, except few exceptions which
support only thumb and not arm
* respect missing "arm" in TUNE_FEATURES in feature-arm-thumb.inc, so
when recipe asks for "arm" and MACHINE supports only "thumb" ignore
recipe and try to build with "thumb"
* show warning when overriding ARM_INSTRUCTION_SET set by recipe from tune
config
(From OE-Core rev: 1250d3e009363d20f15bbfaced622c5912a7fb93)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The base_contains is kept as a compatibility method and we ought to
not use it in OE-Core so we can remove it from base metadata in
future.
(From OE-Core rev: d83b16dbf0862be387f84228710cb165c6d2b03b)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Since commit a83144bac8d67704ff66f5dc0fc56f5b63979694 (2014-02-11), USE_DEVFS is not considered anymore.
For compatibility, let's restore USE_DEVFS semantic.
Also add USE_DEVFS to documentation.conf.
(From OE-Core rev: d12a5e38a02abe3feb3db8ae5ffd9a5005124294)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tuning file for PowerPC e300c3 is soft-float. In OE-classic it was hard-
float and it should be as the c3 has an fpu. I have modified the tuning file
to include both a hard-float version (using the existing ppce300c3 name) and
an optional soft-float version (called ppce300c3-nf).
The following patch also passes a "--with-cpu=e300c3" argument to GLIBC.
For this to have any effect the sqrt/sqrtf implementations added by the
"glibc.fix_sqrt2.patch" are required and also an additional "Implies" file
(added to the mentioned patch as a separate patch for eglibc_2.19).
Tested with eglibc 2.19 on PowerPC MPC5125.
(From OE-Core rev: 9d502ca8551fd461f869395b1b7e62d6dcf59a84)
Signed-off-by: Mats Karrman <mats.karrman@tritech.se>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The problem is that do_configure.sigdata depends on STAMPS_DIR because:
do_configure -> STAMPCLEAN -> STAMPS_DIR
this will make the sigdata generated by "STAMPS_DIR=/tmp/stps bitbake -S
recipe" doesn't match the ones in our build dir, but it should. We can
add STAMPS_DIR or STAMPCLEAN to BB_HASHBASE_WHITELIST to fix the
problem, but we can't add STAMPS_DIR since once it is in
BB_HASHBASE_WHITELIST, the "STAMPS_DIR=/tmp/stps bitbake -S recipe"
would not run again.
[YOCTO $6031]
(From OE-Core rev: faf3e74d5c488a66fdabd485eb916f555d7353fd)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch fixes a typo in the tune config file for ppc64 e6500
where the cpu type is a wrong one.
(From OE-Core rev: 168d57f594f559d8f0cb5a9298055b62ff192f27)
Signed-off-by: Valentin Cobelea <valentin.cobelea@enea.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Setting of a variable PREFERRED_PROVIDER_virtual/libc only if it doesn't have a value
(From OE-Core rev: d0e9f74e3f1322b58b78a9bc82f299d6b9da036f)
Signed-off-by: Andrey Belous <abelous@broadcom.com>
Signed-off-by: Nicolas Dechesne <nicolas.dechesne@linaro.org>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
In an image recipe, you can get a warning, for example:
WARNING: The postinstall intercept hook 'update_font_cache' failed (exit code: 1)! See log for details!
WARNING: The postinstalls for the following packages will be postponed for first boot: ttf-dejavu-sans-mono
(because /usr/bin/fc-cache is missing)
In OE-core, rdepend is correctly done in each recipe:
- ttf-fonts/liberation-fonts
- ttf-fonts/ttf-bitstream-vera
In meta-OE, rdepend is not done but packagegroup-fonts-truetype.bb includes fontconfig-utils:
- ttf-fonts/ttf-arphic-uming
- ttf-fonts/ttf-dejavu
- ttf-fonts/ttf-droid
- ttf-fonts/ttf-gentium
- ttf-fonts/ttf-hunkyfonts
- ttf-fonts/ttf-inconsolata
- ttf-fonts/ttf-liberation
- ttf-fonts/ttf-mplus
- ttf-fonts/ttf-sazanami
- ttf-fonts/ttf-ubuntu-font-family
- ttf-fonts/ttf-wqy-zenhei
(From OE-Core rev: 306335b13fedc18cf03da1c2a68e97c01eb59075)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove genext2fs since we don't use it anymore, it can't support
ext4 well, either. We have used "mke2fs -d" to instead of it.
[YOCTO #6013]
(From OE-Core rev: ff5666bc460520aef6105e117d5431c05fd9f55b)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Intel graphics stack releases >= 2013Q3 need
xf86-video-intel >= 2.99.902. However, keep the stable release around
too, in case people need it.
The git recipe is not really used. Remove, since it has missing
PACKAGECONFIG, license checksums and so on.
(From OE-Core rev: f707b6d81d2548e1bc8effdf267d1e40cc2cb806)
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Make sure variables listed in the Glossary section of the reference
manual are listed here. There are still some listed here that aren't in
the manual; this should be fixed in the manual.
(From OE-Core rev: 954e7050f602acf3dd401ca84a1b9a3b78b0ca28)
Signed-off-by: Belen Barros Pena <belen.barros.pena@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These haven't been used for some time (and DESTDIR was never a BitBake
variable at all).
(From OE-Core rev: a78f6b1454598e74bdd229b0a26bbdcdfa991aa2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We don't want the value of this varflag itself entering any signatures,
ever.
Part of the fix for [YOCTO #5897].
(From OE-Core rev: 1497d3d4b10844aa19ce6dcceed25aa36454160f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
LAYERVERSION_core change to 4 means rename of core-image-basic to
core-image-full-cmdline.
(From OE-Core rev: d87585385bfe00dd5e7448ae7d5bc5dc7f9ac782)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Remove the -z,now flag from linking
[YOCTO #5885]
(From OE-Core rev: 545986bfbfe20f2b6e8a46e88e2cc3007ca344e6)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Drop the -fpermissive C++ compiler flag. We've had this around for years, most
code should have been fixed long ago. Its possible some recipes may fail
however we can (and should) just use the flag where needed.
An OE-Core world build seems to work just fine with this change.
(From OE-Core rev: 24dd8e129447013ee98609f3892ec414b1b21340)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Building powerpc machines with the standard security flags generated numerous
build failures. Use a reduced set of flags for now to avoid linker issues
and other compile failures.
(From OE-Core rev: 4ef8f658874282ead0c46352474fdb03ad1f1038)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has been in testing for long enough in various distros and setups,
lets make it the default.
(From OE-Core rev: 875d8d076bf7678321b847425590bbe06765bb84)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We didn't really need these when the task descriptions were only used
for Toaster, but now we're showing them in -c listtasks they are useful
to have.
(From OE-Core rev: f9d04fcab577d1f48329a4cfe51b1e73fa5d9ba2)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Completes previous commit b5292d4115a4555a66b5e35acdc67dd71fb8577f.
Updates SUMMARY[doc] (meta/conf/documentation.conf).
Changes:
- rename DESCRIPTION with length < 80 to (non present tag) SUMMARY
- drop final point character at the end of SUMMARY string
- remove trailing whitespace of SUMMARY line
Note: don't bump PR
(From OE-Core rev: ad17dfd31a2b97b3e610a0ea0889f5ecb2a63b97)
Signed-off-by: Matthieu Crapet <Matthieu.Crapet@ingenico.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
License formatting and address for FSF in the COPYING and COPYING.LIB
has changed.
Dropped patched already upstream and patches that were workarounds for
older glibc and busybox
for e500 we have should pass --without-fp to eglibc/glibc 2.19 onwards
the code is merged from eglibc into glibc upstream under nofpu/ pretext
(From OE-Core rev: 875df27e56b82fcf970410b6d78e3672471c336a)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These variables should not influence the config hash, i.e. changing them
shouldn't trigger a reparse of the metadata, so whitelist them.
(From OE-Core rev: 8feb51267647d0760f5bec3a8b6f95f4481d9b0d)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The default value for HOMEPAGE of "unknown" has been in place since the
early OE-Classic days, but it doesn't really make sense - "unknown" is
not a valid URL and it just means we have to explicitly check for this
hardcoded string if we're displaying the value in some form of UI, such
as Toaster.
This has required some changes to the packaging classes as they
previously did not expect the value to be blank.
(From OE-Core rev: 244e1d73ef58e92d73c098044c66bd784644b933)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This builds and runs images for all qemu machines
(From OE-Core rev: 015eca84f1b0f25868b47d2480bb60cea698f70e)
Signed-off-by: Khem Raj <raj.khem@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch updates the task descriptions in documentation.conf
It also has a bunch of grammar fixes for the variable descriptions.
(From OE-Core rev: 3f96e97b65bfb2505fb0127a4d6a585e9b14a3e4)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Fixed in this patch:
* All patches marked as submitted to the upstream
* Remove the pseudo dependency because unfs3 can fully stand alone
or be used with pseudo and it does not link against pseudo
* Dependencies to flex for nativesdk and target builds are fixed
such that unfs3 can be deployed into an image
* Add unfs3 references in separatebuilddir.inc because unfs3
works correctly with autotools.
(From OE-Core rev: 7d8075c64bd0734cb70d16acef36c1a17276b359)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Other recipes dependencies and even some comments need to be updated
for the removal of unfs-server and the replacement with unfs3. The
unfs3 is a complete drop in replacement providing all the prior
functionality of NFSv2 but also adding NFSv3.
[YOCTO #5639]
(From OE-Core rev: d577c56519a448b142da5b43e46d5bd9d3a3b4bd)
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* unfortunatelly that note about armv7 matching also armv7a is no
longer valid since armv7 include in armv7 was replaced with
armv6+neon in this commit:
commit 75b8adbc042e0f65fb1286bc550d02becd3b6aea
Author: Khem Raj <raj.khem@gmail.com>
Date: Tue Mar 27 18:37:45 2012 -0700
tune/armv7: Delete
since then thumb and arm feeds had the same architecture
* be aware that this will rename lots of feeds
(From OE-Core rev: 8e8839215032b57763a07363a560c3fd9d6f8e01)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As x86_64 has been "demoted" to an ABI definition rather than a concrete
tune file, replace it with core2-64 for the qemux86-64 machine.
(From OE-Core rev: 65c1ba225a410d2ee1913d55c6f986db9f54cc8e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
No new content, just correcting a few typographical errors.
(From OE-Core rev: 8df13f5013d92954ee76943dad58db75704c3cc5)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Describe the expected usage of base architecture tune files and
arch-specific files, specifically the stacking of generations.
(From OE-Core rev: 282735d7c8fcbd7e354f544c45461b095700fb77)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Before making content changes, cleanup the various whitespace errors in
this file. Mostly end-of-line whitepsace.
(From OE-Core rev: 112e291c14ce4c3b8d074b71e63500dce609784e)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The tune-x86_64.inc file is conceptually flawed. x86_64 is more akin to
the x86 and x86-32 ABIs defined in arch-x86.inc than it is a concrete
tune file, such as i586 or core2 - to the extent that everything but the
default tune is defined in the arch-x86.inc file. This becomes very
apparant when attempting to include tune-x86_64.inc in the x86 tune
hierarchy.
Remove the tune-x86_64.inc tune file in favor of it being an ABI
definition in arch-x86.inc and relying on the linear hierarchy of
concrete cpu-types in tune-i586, tune-core2, and tune-corei7.
core2_64 should suffice in lieu of x86_64 for all but a couple esoteric
corner cases involving older pre-core2 CPUs. In these cases, if they
exist at all, the BSP can replace the include tune-x86_64.inc with
arch-x86.inc and set the default tune to x86_64.
(From OE-Core rev: d8884649b2b3e76519bc10f5908f98d940a9c0cb)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
corei7 offers a significant advancement since the previous core2
cpu-type described in the tune-core2 file.
From the GCC(1):
Intel Core i7 CPU with 64-bit extensions, MMX, SSE, SSE2, SSE3,
SSSE3, SSE4.1 and SSE4.2 instruction set support.
This offers optimizations for Nehalem and Silvermont (e.g. Bay Trail)
CPUs (and beyond).
(From OE-Core rev: 21f8ce2a4b94034284eb74b9c3b4c9cc638511d6)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Core2 has both a 32b and a 64b variant. Currently, core2 implies 32b,
while core2_64 is the 64b version. This implicit 32b mode will become
confusing in later architectures, such as corei7, where it would be
natural for people to assume "corei7" meant 64 bit.
Rather than carrying forward an implicit 32b mode and rather than
changing the naming scheme part way through the architecture hiearchy,
make the 32b and 64b variant explicit in the tune name by changing core2
to core2-32. This patch also standardises on using '-' in the names.
(From OE-Core rev: 69e6395b8d11e2940892a6293ecbbe645c2a478b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Inherit the PACKAGE_EXTRA_ARCHS from i586 and only explicitly add core2
here.
(From OE-Core rev: 2a10d570560c37eb1d23cf853c0e541bc08a2878)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
-march specifies which ISA to use. -mtune specifies which cpu-type to
optimize instruction ordering for, but not which ISA to use. There are
times when it may make sense to specify mtune=generic and use a more
specific march, such as core2, but the opposite makes little sense at
all: use cpu-type specific ISA, but order the instructions
generically. While the -mtune is implied by -march, gcc does not verify
it is using -mtune=core2 with:
gcc -Q -march=core2 --help=target
Explicitly specify -mtune=core2 to be sure.
Add a comment header describing the CPUs targeted by this tune file.
(From OE-Core rev: 4cd33193b2db6c281275db2fb5cc169181955217)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The generic x86 build supports i586 by default, so this specific tune
file technically doesn't add any specific ARCHes to PACKAGE_EXTRA_ARCHS.
For consistency, append the current tune to PACKAGE_EXTRA_ARCHS.
Since we do not have specific tune files for i386 and i486, just drop
them.
These could be added to tune-x86 version if there is a need to
maintain them, but they really do not belong here.
(From OE-Core rev: 1ff914118bdfb19d7f3d794a92ba3735c06ab97b)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ia32 implies 32bit, while these files provide descriptions for IA32,
X86_64, and X32 architectures. The term "x86" fits this used better
without resorting to using the term "Intel" which isn't quite right as
it excludes things like the tune-c3 file describing a Via CPU.
(From OE-Core rev: f5e0a574d87b7dc6466bfe01593fab5aa13464ff)
Signed-off-by: Darren Hart <dvhart@linux.intel.com>
Cc: Richard Purdie <richard.purdie@linuxfoundation.org>
Cc: Paul Eggleton <paul.eggleton@intel.com>
Cc: Tom Zanussi <tom.zanussi@intel.com>
Cc: Nitin Kamble <nitin.a.kamble@intel.com>
Cc: Mark Hatle <mark.hatle@windriver.com>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Cc: Martin Jansa <martin.jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows dependencies to be added to the opkg recipe without causing circular
dependency loops. As opkg-utils has minimal dependencies it is the best recipe
to provide update-alternatives.
This partially solves Yocto Project issue 4836. More work is still needed for a
complete solution.
(From OE-Core rev: 2f18289493f9c2c67ba343fb8e16743bf5dfee24)
Signed-off-by: Paul Barker <paul@paulbarker.me.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The changes to cmake make this unneeded now.
(From OE-Core rev: 92472980b816ee9ada502c1965976cb6eedc0a27)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SUMMARY should not end with a full stop; however if DESCRIPTION is not
set in a recipe and thus defaulted from SUMMARY, the additional
DESCRIPTION values for other standard packages e.g. ${PN}-dev look a bit
odd without a full stop separating the SUMMARY value and the rest of the
text. Add a full stop to avoid this.
(From OE-Core rev: 4b022399815f32166c402d458a40afa6470fc776)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Ensure that if MACHINE_FEATURES is not set by the machine config that we
don't end up with expansion errors during parsing. Technically since the
introduction of MACHINE_FEATURES_BACKFILL = "rtc" this is unlikely to be
a problem unless "rtc" is also added to
MACHINE_FEATURES_BACKFILL_CONSIDERED, however we should be consistent
with DISTRO_FEATURES which is defaulted in bitbake.conf.
(From OE-Core rev: bf2c8946d96524aaa91ab43762c963ea38ccc342)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The layout of stamp files ensures that changes to WORKDIR mean recipes get rebuilt correctly.
Since WORKDIR usually contains MULTIMACH_TARGET_SYS and that depends on tune variables,
including WORKDIR in sstate checksums adds a lot of noise to the system for what amounts to
no gain.
On the other hand, removing it reduces noise, reduces the size of the siginfo files and
reduces the amount of processing bitbake has to do. It therefore seems like dropping it
from the checksums is an all around win.
(From OE-Core rev: 453353e05d027c6a505d1e13a7982718a13bca8b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These are similar relocation R_X86_64_PC32 issues that are solved by
removing the -pie flags.
[YOCTO #5515]
(From OE-Core rev: cd94dd3d9bba32c3fd55959586128b236d1d4e34)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When including xinput-calibrator, in commit "xinput-calibrator: move
it from meta-oe to oe-core" the pointercal-xinput has not been added
to the SIGGEN_EXCLUDERECIPES_ABISAFE. This changes adds it to the
meta/conf/layer.conf's file list.
(From OE-Core rev: 9582ed663d12e635c02c59bff8665c929fa35656)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As per discussion on the mailing list [1], remove this largely
unmaintained external toolchain support in favour of the maintained
version in meta-sourcery [2].
Also correct the example and documentation.conf entries for TCMODE to
match up with this change.
[1] http://lists.openembedded.org/pipermail/openembedded-core/2013-December/087133.html
[2] https://github.com/MentorEmbedded/meta-sourcery/
(From OE-Core rev: 7603b15415301679bccbcb89af688c211704a43a)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* ltp installs 2 different runtests_noltp.sh files from different
directories into /opt/ltp/testcases/bin/runtests_noltp.sh
last one installed wins and causes unexpected changes in
buildhistory's files-in-image.txt report, rename them to have
unique name as other ltp scripts have.
* also define PREFERRED_PROVIDER to resolve note shown when
building with meta-oe layer:
NOTE: multiple providers are available for ltp (ltp, ltp-ddt)
NOTE: consider defining a PREFERRED_PROVIDER entry to match ltp
(From OE-Core rev: ec3bb2c2203b2e8bafc1a631f623f858779e20b7)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
IMAGETEST is now TEST_IMAGE, and TEST_SCEN and TEST_SERIALIZE don't exist
anymore.
(From OE-Core rev: ce0b1ea834ee3ab2256b55fcd8b4092e091cf556)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
gcc tooling appears to be standardising around the FC variable naming.
This patch changes the F77 namespace to FC instead and use the default
gfortran compiler. If anyone needs the F77 variables or tools, those
can still be made on a case by case basis.
Also updates local.conf.sample.extended accordingly.
(From OE-Core rev: ae8c17be2845eff2be8394a5d9a45e6aa321c33d)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
It seems we might be stumbling over an obscure linkage issues possibly
similar to http://marc.info/?l=openssl-dev&m=130132183118768&w=2
This issue appears for x86-64 systems with the PIE related compiler flags.
libcrypto.a(cryptlib.o): relocation R_X86_64_PC32 against symbol
`OPENSSL_showfatal' can not be used when making a shared object; recompile with -fPIC
The error suggests recompiling with -fPIC, but it is already compiled that
way.
Disable the PIE flags makes it work for now, I have posted to openssl ML
[YOCTO #5515]
(From OE-Core rev: 55e1c0e66fd16612016b3e415cbfa4e3051e5a8f)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On real IA hardware, neither the ext3 or cpio images are particularly useful
or used. cpio is legacy from initramfs and that specific image now overrides
FSTYPES accordingly. The size difference in filesystems makes ext3 as a file
format less useful, mainly being useful in the qemu case.
When needed users can still override the default FSTYPES so having
saner defaults makes sense. This improves build times and uses less
network bandwidth for builds and releases.
(From OE-Core rev: 42484d72ed52a1a6f9d3f5b4bf46a72fbfbc490e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
libjson is now known as json-c. Config.status is removed as it breaks
seperate build dir builds. Built without parallel make as it fails,
official word is not to bother trying.
(From OE-Core rev: 533c1db22eddaaaea7d58d1fc75d608b9ba8122a)
Signed-off-by: Jack Mitchell <jmitchell@cbnl.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
ADOBE_MIRROR, HANDHELDS_CVS and E_SVN were broken links and not used by
any recipe in oe-core.
FREEDESKTOP_CVS is no longer useful because all the source code that
matters is in git; no recipe in oe-core still uses the CVS repository.
E_MIRROR, FREEBSD_MIRROR, FREESMARTPHONE_GIT still point to valid-seeming
locations but there are no recipes in oe-core that use them. Any layers
which need these variables can define them for themselves.
GPE_SVN, GPE_EXTRA_SVN, GPEPHONE_MIRROR and GPEPHONE_SVN are not used by
any recipe in oe-core and the corresponding projects seem to be mostly
dead upstream. Again, any layers which still wish to use these variables
can define them locally.
All the above are just wasting space in bitbake's datastore and would be
better deleted.
(From OE-Core rev: 3b333896c71689c664475d53daed52404bf6b21b)
Signed-off-by: Phil Blundell <philb@gnu.org>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
We shouldn't bring this in unconditionally for all ia32 machines.
(From OE-Core rev: d573d424788d56c6fee02c1ee0cdeb96fe610b85)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This variable has been unused since the tune file overhaul two years
ago.
(From OE-Core rev: a1d9f2374ede768057fd364da6c0e1eeeb10499f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These were for task-bootstrap in OE-Classic and have never been used in
OE-Core.
(From OE-Core rev: f4692afb518f07e17fbd35a2023877b7041abef9)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
An empty distro value leads to OVERRIDES and FILESOVERRIDES containing
"::" entries which causes odd issues such as files being included when
they shouldn't be. We could put in anonymous python to guard against
empty entries but its messy and setting a default value for DISTRO to
something harmless is much easier.
This patch adds a weak default and ensures the sanity test doesn't
complain about it.
DISTRO_VERSION and SDK_VERSION are also updated to match.
(From OE-Core rev: b7279f99639774674da806d37d252f388f33055f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This patch updates descriptions and brings more
info for the variable configurations as documented
in the OE-Core manual.
This file is used by Toaster to display help for
the configuration variables.
(From OE-Core rev: 98405beddb93490c8a2e9903adc2a510969ed6a9)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
I discovered bitbake rebuilding packages because WARN_QA had changed. These
variables don't influence the output, so add them to the whitelist.
(From OE-Core rev: 96204ae6e1b19783d6a3f8c590890714eaa9e2d9)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
* we correctly have
${STAGING_DIR_NATIVE}${base_sbindir_native}
and then double slash in
${STAGING_DIR_NATIVE}/${base_bindir_native}
* similar in PKG_CONFIG_DIR where libdir also starts with slash
${STAGING_DIR_HOST}/${libdir}/pkgconfig
* also fix double slash in insane.bbclass and staging.bbclass
* I was a bit nervous about staging change (in case the / was important
in some weird use-case, but the extra slash is there since following
commit where other extra slashes were removed only the one before
libdir was kept:
commit 6ea78d6489
Author: Richard Purdie <rpurdie@linux.intel.com>
Date: Mon Nov 2 17:10:51 2009 +0000
autotools.bbclass: Separate out useful staging functions into
base.bbclass and call from autotools classes
* this isn't fixing any real-world issue AFAIK, I was just trying to
debug one weird case where debugedit fails with
canonicalization unexpectedly shrank by one character
and it's easier to grep for '//' without many harmless instances
already in run* scripts etc
(From OE-Core rev: 0ddaf52e9e344986ae2b016cc068d9eee71b4347)
Signed-off-by: Martin Jansa <Martin.Jansa@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Documentation.conf is used in WebHob to display
information strings about the collected variables.
This patch brings the file up-to-date with latest
information available from the manual.
(From OE-Core rev: b9743c7b130bda3e50cdba4cf260232f1c24abcd)
Signed-off-by: Alexandru DAMIAN <alexandru.damian@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
QEMU machines don't have virtual IrDA or PCMCIA hardware, so don't claim to
support them.
(From OE-Core rev: 694ca965eea971077e135cda4e54fa1cb0243233)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This has now been superseded by testimage.
(From OE-Core rev: d469c92394a1a95ae7a45b8b80dc4c2918e0e9a6)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
To make it easier to move WORKDIR, define it using the new variable
BASE_WORKDIR, which is the root of the work directory.
(From OE-Core rev: 1eee097f2e29b9d6934711c0b1d32e59e9542f53)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As there are two alternative mesa recipes (mesa and mesa-gl), there needs to be
a virtual provider that recipes that explicitly need Mesa (such as xserver-xorg)
can depend on.
(From OE-Core rev: 4a407568472d3c87cd2ce11baf199568249640b6)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Some machines have hardware-specific GL drivers that do EGL and GLES (many ARM
boards). Others have their own EGL/GLES drivers and provide a Mesa DRI driver
(EMGD). Previously adding Mesa, for software GL/GLX rendering in the first case
and hardware GLX in the second, involved bbappends and changing Mesa to be
machine-specific.
By adding a just-GL Mesa the machine definition can combine it with the hardware
drivers cleanly.
(From OE-Core rev: f5a3a4bc33109181c741a2e66c13d0b45566e8fa)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Currently we have a hierarchy of pkgdata directories and the code has to put together
a search path and look through each in turn until it finds the data it needs.
This has lead to a number of hardcoded paths and file globing which
is unpredictable and undesirable. Worse, certain tricks that should be
easy like a GL specific package architecture become problematic with the
curretn search paths.
With the modern sstate code, we can do better and construct a single pkgdata
directory for each machine in just the same way as we do for the sysroot. This
is already tried and well tested. With such a single directory, all the code that
iterated through multiple pkgdata directories and simply be removed and give
a significant simplification of the code. Even existing build directories adapt
to the change well since the package contents doesn't change, just the location
they're installed to and the stamp for them.
The only complication is the we need a different shlibs directory for each
multilib. These are only used by package.bbclass and the simple fix is to
add MLPREFIX to the shlib directory name. This means the multilib packages will
repackage and the sstate checksum will change but an existing build directory
will adapt to the changes safely.
It is close to release however I believe the benefits this patch give us
are worth consideration for inclusion and give us more options for dealing
with problems like the GL one. It also sets the ground work well for
shlibs improvements in 1.6.
(From OE-Core rev: 1b8e4abd2d9c0901d38d89d0f944fe1ffd019379)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Increase the version to signify the layout change of the images
in the deploy directory.
(From OE-Core rev: 4246e7dd59800a1d6c6d02c00f4e86eeac020767)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This allows a clean seperation between image outputs from different
machines, and makes it possible to have convenience symlinks to make
the output ready to deploy.
This did require some surgery in runqemu; if explicit paths to the image
and kernel are not supplied then DEPLOY_DIR_IMAGE needs to be determined
from bitbake or set in the environment. However the script does try to
avoid requiring it unless it really is needed. Corresponding changes
were made in the automated testing code as well.
Based on an RFC patch by Koen Kooi <koen@dominion.thruhere.net>
(From OE-Core rev: 7e90261aec61f79680b5eaeaf5b18c7b795412a4)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
For a long time we've provided PN-PV and PN-PV-PR by tweaking PROVIDES. This looks
nice at first glance however it turns out to be a bit problematic. Taking make as an
example where there are two versions, 3.81 and 3.82, what should "bitbake make-3.81" do?
Currently it builds make-3.81 and make-3.82 and breaks in interesting ways. Is that
a bitbake bug? Well, it certainly shouldn't try and run the build. Why is it building
3.82 though? Its due to finding a dependency on "make-dev" and then trying to figure
out what provides it? The answer is "make" and the default version of "make" is 3.82.
So arguably, finding "make-3.81" should infer PREFERRED_VERSION_make = "3.81". Doing
so resolved the above problem since now "make" resolves to "make-3.81".
So what about if we have Recipe A:
DEPENDS = "make-3.81"
and Recipe B:
DEPENDS = "make-3.82"
That is clearly an error, easy. So finally what about if we have Recipe A:
DEPENDS = "make-3.81"
and Recipe B:
DEPENDS = "make"
The first recipe infers the PREFERRED_VERSION_make = "3.81" and then forces that
version on everything else. Is that desired? Probably not in most cases, at least not
silently.
As mitigation, we could print a WARNING about this happening. The final part of the problem
is that we can ony figure this out within bitbake itself. That means we'd have to teach bitbake
about the PN-PV format of PROVIDES which is breaking the separation between bitbake and the
metadata. We can't win :(.
Nobody that I know of is using or relying on this functionality so perhaps we should
just remove it instead which is what this patch does. Opinions?
(From OE-Core rev: a87c205bb6cefd5e1a41b8e7ef02b5bfa380e3b6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Mesa refuses to compile if the "opengl" DISTRO_FEATURE isn't enabled,
mesa-driver-i9xx and the GLX X module have to be conditional in the ia32 machine
defintion too.
(From OE-Core rev: 8b5c07e6c3b492f56ce9c5f99a732793403d6b36)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
As Mesa refuses to compile if the "opengl" DISTRO_FEATURE isn't enabled,
mesa-driver-swrast has to be conditional in the QEMU machine defintions too.
(From OE-Core rev: 9951e1da6a755f9a46d3a595aa4c2f975aee8f46)
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
APM is not only obsolete, but requires a kernel config enabled and is meaningless for QEMU VM
[YOCTO #5121]
(From OE-Core rev: b0f8c47b1e808421f03308527beb8bde15644acd)
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gcc recipes reference this however we account for it in the work
directory paths and we don't want recipes depending on the value changing.
This avoids unecessary rebuilds when switching SDKs.
(From OE-Core rev: 6cdcc543ce8f532a4f66246114241b43821a111e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
These have been deprecated for a long time, convert the remaining
references to the correct modules and prepare for removal of the
compatibility support from bitbake.
(From OE-Core rev: 6a39835af2b2b3c7797fe05479341d71a3f3aaf6)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
This was never a particularly useful browser and is a dead codebase, retire
it and suggest midori instead.
[YOCTO #2318]
(From OE-Core rev: 3883d2cb03fb79fa39a7d85505c79784a996f178)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
SPDX integrates real-time license scanning, generates
SPDX standard output and license verification
information during the OE-Core build process. The
existing module includes scanning patched packages
and creating package and file level SPDX documents.
(From OE-Core rev: 7a37cc81fb95d56b5ac5e5ca22a1900e45717911)
Signed-off-by: liangcao <liangcao@unomaha.edu>
Signed-off-by: Elizabeth Flanagan <elizabeth.flanagan@intel.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Now that the 3.10 kernel has been released we can bump the libc-headers to
that version and remove the 3.8 variant. Userspace compatibility is
maintained through kernel versions, we also make the single 3.10 version the
toolchain default.
(From OE-Core rev: 4e79a46254e778f85c00efd4b0085cbaeb6e0d4d)
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There is a need for a default provider for bluez
now that bluez5 recipe is also present.
After the introduction of bluez5 recipe,
the following warnings are displayed:
"NOTE: multiple providers are available for runtime libasound-module-bluez (bluez4, bluez5)
NOTE: consider defining a PREFERRED_PROVIDER entry to match libasound-module-bluez"
Upon debug, bitbake shows:
DEBUG: checking PREFERRED_PROVIDER_bluez4 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez4-4.101 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez4-4.101-r5 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez5 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez5-5.7 (value None) against ['bluez4', 'bluez5']
DEBUG: checking PREFERRED_PROVIDER_bluez5-5.7-r0 (value None) against ['bluez4', 'bluez5']
Bitbake is faced with the question "what should provide libasound-module-bluez?"
which is a runtime name. It needs to try and find a PREFERRED_PROVIDER entry
which matches this but those use *build time* naming. So it converts "libasound-module-bluez"
into the canonical ${PN} of bluez4 and bluez5 and then tries to look those up.
What it actually should do is go one step further of mapping bluez4/bluez5
into the virtual/bluez but that does not happen.
Bug opened on this issue: YB5044
https://bugzilla.yoctoproject.org/show_bug.cgi?id=5044
[YOCTO #5030]
(From OE-Core rev: 6f07d066074b1e01ff3c16408812e6b6d5e531ac)
Signed-off-by: Cristian Iorga <cristian.iorga@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
There were darwin8/darwin9 overrides spinkled in the code from times gone
by. Lets settle on the darwin override and remove the others since its pointless
duplication. We always inject darwin into OVERRIDES if needed in the darwin8/9
cases.
(From OE-Core rev: 8d5e6eed7802a6056f9eaa50a85e3eee00fe2742)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
On darwin, we have:
libxxx.dylib -> libxxx.Y.dylib
compared to Linux which has:
libxxx.so -> libxxx.so.Y
Our ordering of PACKAGES with -dev first and then ${PN} makes it impossible to
match the files correctly using simple globbing. This makes darwin targets
completely broken since both the libs and the dev symlinks end up in ${PN}-dev.
Whilst this commit is a hack, it at least puts the files into ${PN} and allows the
builds to be used. Symlinks don't take up much space so this isn't the end of
the world. I'm open to better solutions to this.
(From OE-Core rev: 51c3dbe2df45096bbd7866adabb08e114952ff13)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Hardcoding -nativesdk as the sdk package architecture is inflexible. We may have
multiple different target OS and we need a way to be able to separate them. Turning
this into a configurable value allows the flexibility we need to build different
SDKMACHINEs with different OS targets.
The commit should have no behaviour change, just makes things more configurable.
(From OE-Core rev: a2110e86b98d646e136de9ec6b8e668079b0d4f4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
The gettext handling of USE_NLS has become a bit tricky to understand, or
alter from the SDK context. This patch introduces a SDKUSE_NLS which can
be set to configure a given SDK/ADT to use NLS or not. This is independent
of the target system NLS usage.
The code in gettext.bbclass is therefore simplified and the classes
themselves now set USE_NLS to appropriate values. No NLS is used
for native, cross and crosssdk since it is never used there and
would just increase build time.
(From OE-Core rev: fe634d47449899f7424adb77ff5bc7ddf8a07a47)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add NO_RECOMMENDATIONS support. A way to disable all recommended
packages from being installed. This will help shrink the size of
the resulting filesystem.
Add documentation on NO_RECOMMENDATIONS and BAD_RECOMMENDATIONS.
Note, using NO_RECOMMENDATIONS has side effects such that kernel-modules may
not have been installed. A user will need to manually add to their image
any kernel-modules required to be on the image for functionality.
(From OE-Core rev: 0341bfa886ea851f5a394051545b4e624d8003dd)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Add the foundation for the PACKAGE_EXCLUDE support.
As part of this work, it was noticed that the PACKAGE_INSTALL and
PACKAGE_INSTALL_ATTEMPTONLY were still using he 'normal' version for
dependencies. This should no longer be necessary as of the change in the way
the complementary package groups (dev, dbg, ptest and others) are defined.
By making this change the dependency tree is more correct than before, and
gives the ability for manipulating PACKAGE_INSTALL and
PACKAGE_INSTALL_ATTEMPTONLY, while adjusting the dependencies at the same
time.
Warning messages will be generated if the user is trying to exclude a
package that was previously in the PACKAGE_INSTALL or
PACKAGE_INSTALL_ATTEMPTONLY variables.
(See additional commits for package manager specific support.)
Add documentation on PACKAGE_EXCLUDE and related variables.
(From OE-Core rev: 208d4d5ef7c5ead35dc27b7808f92ed377377aa4)
Signed-off-by: Mark Hatle <mark.hatle@windriver.com>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
When making distributions based on the default distro-less config, it
is useful to be able to reuse the default DISTRO_FEATURES options
without the need of duplication. The new variable,
DISTRO_FEATURES_DEFAULT, allow this reuse and customization.
So distros can include 'default-distrovars.inc' and use:
,----[ Use example ]
| DISTRO_FEATURES ?= "${DISTRO_FEATURES_DEFAULT} myfeature"
`----
(From OE-Core rev: 660ec04786162ff7f40aa78eb154dc4b5bf6ed9f)
Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Saul Wold <sgw@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
Martin Jansa
Jussi Kukkonen
Richard Purdie
Paul Eggleton
Hongxu Jia
Ross Burton
Carlos Alberto Lopez Perez
Mark Hatle
Armin Kuster
Beth Flanagan
Robert Yang
Alexander Kanavin
Nathan Lynch
Christopher Larson
Khem Raj
Juro Bystricky
Dmitry Eremin-Solenikov
Randy Witt
Aníbal Limón
Pau Espin Pedrol
Topi Kuutela
André Draszik
Bruce Ashfield
Trevor Woerner
Cristian Iorga
Joe Slater
Andre McCurdy
Marek Vasut
Saul Wold
Kai Kang
Dmitry Eremin-Solenikov
Denys Dmytriyenko
Belen Barros Pena
Koen Kooi
Alejandro Hernandez
Chong Lu
Belen Barros Pena
Paul Barker
Ting Liu
Dan McGregor
Robert P. J. Day
Peter A. Bigot
Alexandru DAMIAN
Richard Tollerton
Peter Seebach
Tobias Olausson
Jonathan Liu
Maciej Borzecki
Chen Qi
Armin Kuster
Max Eliaser
Nitin A Kamble
Roxana Ciobanu
Matthieu Crapet
Jacob Kroon
Tim Orling
Andrea Adami
Changhyeok Bae
Otavio Salvador
Mats Kärrman
Valentin Cobelea
Andrey Belous
Laurentiu Palcu
Kristof Robot
Jason Wessel
Darren Hart
Richard Purdie
Jack Mitchell
Phil Blundell
Cristiana Voicu
liangcao