The Karo TX6X family consists of different i.MX6Q/DL based System-on-Modules.
Add support for the TX6u 801x modules, that have an i.MX6DL SoC.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Altera SOCFPGA have a FPGA Manager, that manages and monitors the FPGA portion
of the SoC.
Cc: devicetree@vger.kernel.org
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Altera FPGAs that are programmed via SPI use the passive serial protocol.
Add a simple binding that describes the setup for this usecase.
Cc: devicetree@vger.kernel.org
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's often useful to get some information about a barebox image
before starting or flashing it. This patch introduces barebox
Image MetaData (IMD). When enabled a barebox image will contain
a list of tags containing the desired information. We have tags
for:
- the barebox release (2014.07.0-00160-g035de50-dirty)
- the build timestamp (#741 Mon Jul 28 15:08:54 CEST 2014)
- the board model the image is intended for
- the device tree toplevel compatible property
Also there is an additional generic key-value store which stores
parameters for which no dedicated tag exists. In this patch it
is used for the memory size an image supports.
Since there is no fixed offset in a barebox image which can be
used for storing the information, the metadata is stored somewhere
in the image and found by iterating over the image. This works
for most image types, but obviously not for SoC images which are
encoded or encrypted in some way.
There is a 'imd' tool compiled from the same sources for barebox,
for the compile host and for the target, so the metadata information
is available whereever needed.
For device tree boards the model and of_compatible tags are automatically
generated.
Example output of the imd tool for a Phytec phyFLEX image:
build: #889 Wed Jul 30 16:08:54 CEST 2014
release: 2014.07.0-00167-g6b2070d-dirty
parameter: memsize=1024
of_compatible: phytec,imx6x-pbab01 phytec,imx6dl-pfla02 fsl,imx6dl
model: Phytec phyFLEX-i.MX6 Duallite Carrier-Board
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Someone
loadx (load binary file over serial line (X-Modem))
looked more silly than
loadx - load binary file over serial line (X-Modem)
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Documentation/gen_commands.py use to re-write all auto-generated *.rst
file, changed or not. That in turn didn't work well with the internal
cache of the Sphinx documentation generator.
By comparing the SHA1 hash of the newly generated *.rst with the
current sha1 file, the time to execute "make docs" can be reduced
from 6.2s to 2.4s on my humble laptop.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The help definition already contained a group declaration.
This is now reused for the HTML documentation.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A number of minor fixes, and including the help output from the
"dfu-util" command for the benefit of the reader.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A number of grammar fixes, typoes, font changes from the defaultenv-2
chapter.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Doc fixes such as:
* font changes
* spelling
* punctuation
* capitalization
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Various grammar/font fixes to that section, including adding an
additional section describing how to properly do "out of tree"
configuration and building.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adjusted Sphinx markup for devicetree bindings pages.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some minor cleanup to the sandbox.rst documentation file, mostly
involving using a definition list for the options.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Various fixes related to fonts, rendering, grammar, etc., such as:
* spelling mistakes
* hyphenation
* capitalization for proper names
* proper bullet list formatting
* sentence structure
and so on.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also make this download chapter note the next branch.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Note that I used "Appendix: " as text, because it looks like
python-sphinx doesn't know about appendices.
Signed-off-by: Holger Schurig <holgerschurig@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a rewrite of the Documentation in reStructuredText format using
Sphinx as build system, see http://sphinx-doc.org/.
The documentation is built into static html pages with 'make docs'.
The pages can be found under Documentation/html after building.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Remove the barebox devicetree documentation. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This removes the documentation texts in Documentation/. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The doxygen documentation is long outdated. Remove it. It will
be replaced with sphinx based documentation later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All MIPS board use <vendor>-<model> name template save Ritmix RZX-50.
This commit fixes this inconsistency.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The flags parameter was skipped in the example. Add it as
DEVFS_PARTITION_FIXED.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the possibility to configure the place for the environment
from the devicetree and to partition devices from the devicetree.
Configuration has the general form of devices with a regular compatible
property. This allows to later add additional drivers or drivers with
different behaviour (for example to add support for redundant environment).
The configuration is all in the /chosen/barebox/ hierarchy of the
devicetree. This separates the configuration from the hardware
description. Also it makes it possible to store the configuration
in a completely separate devicetree (or devicetree overlay). For
the same reason all configuration is done using nodepathes rather
than phandles.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so be can add more format support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The m68k support is compile broken for a long time now and nobody
cared so far. We cannot keep the architecture uptodate with current
development wihtout being able to compile it. It's still in the
archives and can be re-added anytime once somebody cares for.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds command entries for all commands available in barebox.
However, as there is no documentation for all of these commands, 'make
docs' will now spit out warnings.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Hush documentation is a nightmare, so remove sh documentation from the
command index. This needs proper rework for all of the hush commands.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
The cross_arch and cross_compile links method is obsolete and not
available any more, so we remove it from the documentation.
Signed-off-by: Robert Schwebel <r.schwebel@pengutronix.de>
Sascha Hauer
Steffen Trumtrar
Antony Pavlov
Ezequiel Garcia
Holger Schurig
Jan Luebbe
Robert P. J. Day
Alexander Shiyan
Uwe Kleine-König
Jan Weitzel
Vicente
Jean-Christophe PLAGNIOL-VILLARD
gregory hermant
Juergen Kilb
Marc Kleine-Budde
Juergen Beisert
Robert Schwebel