When booting from SD Card we don't want to load an env
from EMMC.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a squashed commit of the following downstream
commits:
- Set CS0_END in MMDC0_MDASP to 32Gb (4GB)T
- Fix writes to MMDC0_MDSCR
- Enable bank interleaving (BI_ON) and set write
additional latency (WALAT) to 1 cycle in MMDC0_MDMISC
- Set ARCR_DYN_JMP=1 and ARCR_DYN_MAX=15 in MMDC0_MAARCR
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This was broken with commit 2a1f5f802e
"ARM: rename boards to more consistent naming"
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sets up MSELECT to let main CPUs talk to peripheral devices and starts
high performance A9 CPU cluster.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to talk to external PMIC devices to bring up CPU rail.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Copying files to tftp is broken since:
| commit d4f5bb1e01
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Sat Sep 28 13:12:50 2013 +0200
|
| copy_file: Add missing O_TRUNC
|
| Without it, when copying a smaller file over a larger file the
| resulting file still has the remaining space from the larger file.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since this commit copy_file passes O_TRUNC to open(). This results in the
fs layer calling fsdrv->truncate. tftp returns -ENOSYS here and open returns
with an error. To fix this return 0 for the truncate callback in tftp. Also
enforce the O_TRUNC flag when opening a file for writing on tftp as the files
are always truncated on tftp anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reported-by: andreas.willig@rafi.de
struct ubi_device and struct ubi_volume have devices attached
to them. Register them to make them part of the barebox device
hierarchy.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So far mtd partitions were mtd devices, but these were not registered.
This patch changes this. mtd partitions are now registered like real
mtd devices. This makes them part of the device hierarchy.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
struct mtd_info contains members which should not be copied
to the new partition, like for example the class_dev, so
only copy selected members of struct mtd_info to the partition.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
mtd->parent is optional so we can't derefence mtd->parent->device_node
without checking mtd->parent.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
erase_info may be modified by the mtd partition code, so
set the address each time we call mtd_erase.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch gates the clocks to GPU, IPU, and VPU units by default,
significantly reducing the VDDSOC power draw while barebox is running.
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
SYSCON3 register is not used in the barebox, so remove driver for
this register entirely.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most devices relevant for barebox like sd/emmc/network/uarts
work. Devicetree contains several undefined drive strength settings,
these can be fixed once the kernel has sorted this out.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adding minimal support for the UDOO board.
For more information about the board: http://www.udoo.org/
Signed-off-by: Raphael Poggi <poggi.raph@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a target to generate environment files from directories.
These are compiled into the barebox binary.
use it as:
bbenv-$(CONFIG_SOMETHING) += my-environment
The directory containing the files to compile into the binary
should be named my-environment.
This can be accessed in C code later as:
extern unsigned char __bbenv_my_environment_start[];
extern unsigned char __bbenv_my_environment_end[];
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default environment buffer is an unsigned char array and thus
may be unaligned. Some decompression algorithms expect the buffer
to be sufficiently aligned for u32 accesses. We make this sure by
copying the default env to a temporary buffer. Instead of doing this
just add a __aligned(4) to the default environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of asking explicitly for the default environment compression
type ask for the in-barebox default compression type. This also adds
a DEFAULT_COMPRESSION_SUFFIX make variable which can be used together
with the wildcard rules for compressed files to generate compressed
files without explicitly support each compression type.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For proper startup we need to give clocks and IO signals some time to
stabilize. Tegra2 got away without them, but Tegra3 seems to be a bit
pickier.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Lowlevel code runs when not relocated yet, so we have to make extra sure
not to emit jump-tables with absolute adresses when evaluating switch
statements.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Finding out whether to rebuild the environment is a difficult task
since we have to track all files in a directory. Instead of trying
this, just rebuild the environment during every build and only if
it differs to the last one overwrite the target. This way make
only sees a change when the environment is changed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Devicetrees specify the keyboard codes for the gpio-keys
driver, so add a table to translate them into something
barebox can use.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/of/base.c:70:20: warning: symbol 'root_node' was not declared. Should it be static?
drivers/of/base.c:72:20: warning: symbol 'of_aliases' was not declared. Should it be static?
drivers/of/base.c:1724:20: warning: symbol 'of_chosen' was not declared. Should it be static?
drivers/of/base.c:1725:12: warning: symbol 'of_model' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/i2c/i2c.c:246:19: warning: symbol 'i2c_new_device' was not declared. Should it be static?
drivers/i2c/i2c.c:274:6: warning: symbol 'of_i2c_register_devices' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
drivers/clk/clk-divider-table.c:81:16: warning: symbol 'clk_divider_table_ops' was not declared. Should it be static?
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Lucas Stach
Michael Olbrich
Philipp Zabel
Lucas Stach
张忠山
Sascha Hauer
Alexander Shiyan
Raphaël POGGI
Fabio Estevam