Clock gates having the CLK_GATE_HIWORD_MASK flag set use the upper 16
bits of the register as a "write enable" mask for the value in the
lower 16 bits.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a clk_gate_flags argument to clock gate creation functions
to allow the introduction of new clock gate modifiers.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When a mtd device can have bad blocks we want to create a
bb device, so do this automatically. This allows us to
drop bb device creation from the environment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Rework the current framework so that I/O mapped I/O resources are
also possible.
Signed-off-by: Michel Stam <michel@reverze.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the clk-divider to Kernel code, but without power-of-two
divider support which we do not need yet. This also adds table based
divider support to the divider.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This macros are used in exported from linux TI DaVinci code.
Also this macros are used in MIPS cache support code.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MTD internal API presently uses 32-bit values to represent device
size. This patch updates them to 64-bits but leaves the external API
unchanged.
In general, changing from 32-bit to 64-bit values cause little
or no changes to the majority of the code with the following
exceptions:
- printk message formats;
- division and modulus of 64-bit values (mtd_div_by_wb,
mtd_div_by_eb may be used in some of such cases).
Was tested on phyFLEX i.MX6.
Signed-off-by: Dmitry Lavnikevich <d.lavnikevich@sam-solutions.com>
Signed-off-by: Grigory Milev <g.milev@sam-solutions.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The default nand_read_subpage implementation returns -ENOSUPP, so we have
to make sure that barebox never uses this implementation. By setting the
NAND_SUBPAGE_READ flag to 0x0 we ensure NAND_HAS_SUBPAGE_READ() never returns
true and also give the compiler a chance to optimize away some unused code.
subpage reads are a rather exotic feature even in Linux. It is only used on
largepage NANDs with soft ecc. Even if we have this case it needs non page
aligned reads to actually profit from this feature.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Hattink, Tjalling [FINT] <T.Hattink@fugro.nl>
This imports the Marvell mbus driver from Linux. The mbus is the
main downstream bus found on all Marvell Orion SoCs. The driver
deals with re-configurable address windows which are currently
parsed from DT. Also enable the driver as default on all MVEBU
SoCs. While at it, also reorder drivers/bus/{Kconfig,Makefile}
alphabetically.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements a of_phy_device_connect to allow DT enabled drivers
to connect to a PHY device by using the PHY's DT node only. It
currently assumes that each PHY node is a child of the corresponding
mdio bus.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Boards register a fixup for a phy without checking if phy support
is enabled. To fix compilation without phy support add a static
inline wrapper for phy_register_fixup_for_uid.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
miitool without arguments will try to show status for all phys.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ubiformat needs the subpagesize to work correctly. The kernel uses
sysfs to pass the subpagesize, but in barebox we have the possibility
to extend struct mtd_info_user. Add a corresponding field and use it
in ubiformat.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this phy_device_connect only registers a phy device if it wasn't
registered already. This allows us to register phy devices outside
of ethernet drivers. phy_device_connect will now pick up an already
registered phy given that it's not attached to another ethernet device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If an ethernet device already has a phy in phy_device_connect all we
have to do is to start autonegotiation. Do this early and bail out
so that for the rest of the code it's clear that we have to search for
a phy device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This add barebox versions of of_clk_init for parsing and registering
clock providers from DT. Also, a macro CLK_OF_DECLARE is added, that
allows to put init callbacks into its own section that can be linked
in the binary.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Right now we do not support persistent names for mtd devices. The
base name can be passed to add_mtd_device, but this is always appended
with a dynamic number. With this patch add_mtd_device takes a device_id
argument which can be used to create a mtd device with an exact name.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
KSZ8031 is similar to KSZ8021. It can use the same functions.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add function for indirect access of the mmd registers, based on linux.
phy_read_mmd_indirect
phy_write_mmd_indirect
Also clean some private mmd functions
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add empty definitions for mutexes, spinlocks and other stuff from
the kernel to make it easier to reuse code from the kernel.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a fresh UBI import from Linux v3.10
This is done mainly to get fastmap support.
This was tested with the i.MX nand driver, the MXS nand driver and
on CFI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To update to the latest UBI support from the Kernel first remove
the old UBI support. Without it the update will be even less reviewable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:
- locks removed
- The splitting in different files we had to better support different
features has been dropped. Instead this is now done mostly with the
use of __maybe_unused
Some barebox adjustments are forward ported, like:
- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces the ecc stength fields in the structures and fills
them in, but leaves them unused right now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for extracting LZ4-compressed kernel images,
as well as LZ4-compressed ramdisk images in the kernel boot process.
This depends on the patch below
decompressor: Add LZ4 decompressor module
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for LZ4 decompression in the Linux Kernel.
LZ4 Decompression APIs for kernel are based on LZ4 implementation
by Yann Collet.
LZ4 homepage : http://fastcompression.blogspot.com/p/lz4.html
LZ4 source repository : http://code.google.com/p/lz4/
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Allows to reuse the clk gate code within other clocks.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linuxkernel with some small adjustments for barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
On MXS we need to poll the busy bit when changing a clock rate, but only
when the parent clocks are enabled. This exposes the already present
function clk_is_enabled which is suitable for this job.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds several missing includes to files under include/ which
we relied on being included implicitly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix the problems introduced when detecting non ONFI flashes in
commit 4c2bdc8728
"nand_base: detect more ONFI flash"
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows us to better detect whether a clk is enabled or not.
- If we can ask a clk, ask it. If it's enabled, go on and ask parents
- If we can't ask it, but it can be enabled, depend on the enable_count.
if it's positive, go on and ask parents
- If we can't ask it and it cannot be enabled, assume it is enabled
and ask parents.
This makes the CLK_ALWAYS_ENABLED unnecessary, since the fixed clk now
always returns 1 in its is_enabled callback.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds helpers to define resources, such as
DEFINE_RES_NAMED, DEFINE_RES_MEM and DEFINE_RES_MEM_NAMED.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds generic memory-mapped GPIO controller support.
Code taken from Linux Kernel and adopted for barebox.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file is present in current kernels. In order to get closer
to current mtd support introduce it for barebox aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
While erasing bad blocks is a potentially dangerous operation
it is sometimes needed during development or when some foreign
code has touched the flash.
This patch adds a device parameter 'erasebad' to allow erasing
bad blocks. Since this is not wanted during production this is
behind a Kconfig option.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This allows us to have some NAND specific stuff during registration,
like for example adding NAND specific device parameters.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The roundup_pow_of_two function is making use of __roundup_pow_of_two
when the call to __builtin_constant_p fails, which is not implemented in
barebox.
Copied the code from Linux log2.h header.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
do not try to read the status in force mode
the link is up
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Do not write pages which only contain 0xff. UBI expects pages which
seem empty to be writable. This got lost with:
| commit 3139c3e9a6
| Author: Sascha Hauer <s.hauer@pengutronix.de>
| Date: Thu Nov 29 11:16:40 2012 +0100
|
| mtd core: call driver write function with complete buffer
|
| mtd->write is supposed to loop around pages internally, no need
| to do this in mtd_write. This fixes a huge write performance drop
| with the m25p80 driver when it was converted to a mtd driver recently.
| Since mtd->writesize is 1 for this driver mtd_write ended up doing
| single byte writes on the flash.
Introduce mtd_all_ff as a global function since UBI currently has its own
implementation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
form linux 3.8
so you can have part by num or name
not by GUID as this is a non human reading name
`---- ffe08000.sata
`---- 0x00000000-0x3fffffff: /dev/ata0
`---- 0x00100000-0x063fffff: /dev/ata0.0
`---- 0x00100000-0x063fffff: /dev/ata0.boot
`---- 0x06400000-0x3fefffff: /dev/ata0.1
`---- 0x06400000-0x3fefffff: /dev/ata0.linux
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
need it by upcoming EFI GPT support
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel has mtd_read, mtd_write, mtd_erase and mtd_block_markbad.
Add these functions to barebox aswell to make future mtd synchronizations
with the kernel easier.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can use it on vexpress to detect the hardware mapping
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
detect the cpu model to dynamise the periphs mapping
currently only tested on qemu but should work on real hardware
Cortex-A9
if you use 1GiB of ram you can run the same barebox on Cortex-A15 or Cortex-A9
otherwise use vexpress_ca9_defconfig where the TEXT_BASE is at 0x63f00000
when we will add the relocation support this defconfig will be drop
qemu/arm-softmmu/qemu-system-arm -M vexpress-a9 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Cortex-A15
qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When starting a network device wait until the link is up. Otherwise
autobooting does not work with little timeout and several attempts
have to be made until the network is finally up.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Current barebox clk framework allow disable any clock
and there is no means to prevent that.
But there are the clocks that can't be disabled
by software at all.
This patch allow registration of a clock immune to clk_disable().
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we now create the cdev via mtd
This will also simplify sync with linux
to avoid the m25p8000 or m25p00 the cdev is still named name m25p and the
drivers m25p80
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if board need specific phy fixup they can register it and then the code will
executed only if needed
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as we to have specific phy init to fix chip issue link detection support
based on linux 3.6
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
to allow to register an array of drivers
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to do not provide block_isbad at mtd driver level
as example spi flash
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on linux implementation.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds barebox common clk support loosely based on the Kernel common
clk support. differences are:
- barebox does not need prepare/unprepare
- no parent rate propagation for set_rate
- struct clk is not really encapsulated from the drivers
Along with the clk support we have support for some basic clk building
blocks:
- clk-fixed
- clk-fixed-factor
- clk-mux
- clk-divider
clk-fixed and clk-fixed-factor are completely generic, clk-mux and clk-divider
are currently the way i.MX muxes/dividers are implemented.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most clock/device associations can be done based on the physical
base address of the corresponding device. So instead of depending
on string matching add an optional possibility to associate a clock
lookups with physical addresses. This also has the advantage that
the lookups for devicetree based devices can be identical to the
platform based devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Adapt phylib from linux
switch all the driver to it
reimplement mii bus
This will allow to have
- phy drivers
- to only connect the phy at then opening of the device
- if the phy is not ready or not up fail on open
Same behaviour as in linux and will allow to share code and simplify porting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
The FSF address has changed in the past. Instead of updating it
each time the address changes, just drop it completely treewide.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to detect the amba device and use the right driver for it at
runtime.
The code is base on linux 3.5.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
This introduces a new NAND_BUSWIDTH_AUTO flag which can be used
to automatically detect the nand buswidth. The id is always read
in 8bit mode. An additional callback is needed to switch the nand
controller into 16bit mode.
This currently depends on a safe read_byte (always) and read_buf
(for onfi-only flashes) callback. It has been tested on OMAP, but
is not something that generally works. For this reason the existence
of the set_buswidth callback is used to determine whether we are
able to do autodetection or not.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From Linux commit 69349c2dc01c489eccaa4c472542c08e370c6d7e:
Using IS_ENABLED() within C (vs. within CPP #if statements) in its
current form requires us to actually define every possible bool/tristate
Kconfig option twice (__enabled_* and __enabled_*_MODULE variants).
This results in a huge autoconf.h file, on the order of 16k lines for a
x86_64 defconfig.
Fixing IS_ENABLED to be able to work on the smaller subset of just
things that we really have defined is step one to fixing this. Which
means it has to not choke when fed non-enabled options, such as:
include/linux/netdevice.h:964:1: warning: "__enabled_CONFIG_FCOE_MODULE" is not defined [-Wundef]
The original prototype of how to implement a C and preprocessor
compatible way of doing this came from the Google+ user "comex ." in
response to Linus' crowdsourcing challenge for a possible improvement on
his earlier C specific solution:
#define config_enabled(x) (__stringify(x)[0] == '1')
In this implementation, I've chosen variable names that hopefully make
how it works more understandable.
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the code is taken from linux & u-boot implementations
Validated on an i.MX53 which gives the following log :
ONFI flash detected ... ONFI param page 0 valid
NAND device: Manufacturer ID: 0x2c, Chip ID: 0x38 (Micron MT29F8G08ABABAWP), page size: 4096, OOB size: 224
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Beniamino Galvani
Antony Pavlov
Sascha Hauer
Michel Stam
Dmitry Lavnikevich
Sebastian Hesselbarth
Markus Pargmann
Jean-Christophe PLAGNIOL-VILLARD
Jan Weitzel
Kyungsik Lee
Lucas Stach
Eric Bénard
Jan Luebbe
Alexander Shiyan
Maxime Ripard
Carlo Caione