The entry function wasn't changed properly when the
prototype changed.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The start-r QSB has a different pmic than the older start QSB.
Add a new dts for the QSRB and let barebox generate two images when
LOCO is selected.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There are two versions of the i.MX53 LOCO:
- the MCIMX53-START board
- the MCIMX53-START-R board
The MCIMX53-START-R has a mc34708 pmic and is otherwise the similar to the
MCIMX53-START. To prepare for the START-R, move all common nodes to a new
imx53-qsb-common.dtsi
and remove everything but the board name and pmic from the imx53-qsb.dts.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Solidrun has renamed the Carrier-1 to Hummingboard.
This is also the name that is used in upstream Linux,
change barebox to be in line with that.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the 1GB variant is supported for now, as I don't
have anything other to test with.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Needed to be able to update other i.MX 6 DTs properly.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Otherwise we end up doing the VMX53 board init for
unrelated boards when using a multiimage build.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for new board variants. Now Supported are:
- i.MX6q module with 1GiB Micron RAM
- i.MX6d/q modules with 1GiB/2GiB Nanya RAM
- i.MX6s modules with 512MiB/1GiB Nanya RAM
This has been tested on:
- i.MX6q module with 1GiB Micron RAM
- i.MX6d module with 2GiB Nanya RAM
- i.MX6s module with 1GiB Nanya RAM
The possible RAM equipment is:
- For the 512MiB module: 2x Nanya nt5cb128m16fp-di
- For the 1GiB modules: 2x Nanya nt5cc256m16cp or 4x Micron MT41K128M16JT-125
- For the 2GiB module: 4x Nanya nt5cc256m16cp
The 512MiB Nanya board is assumed to work with the same DCD table
as the 1GiB Nanya board. The variant is detected by mirroring at
512MiB, but this hasn't been tested by Pengutronix.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the ANATOP_SI_REV register we can only distinguish between
i.MX6q/d and i.MX6dl/s SoCs. Take the number of cores into account
to get the exact SoC type.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes it possible to pull other DT changes from
the linux kernel repo. Plus it will make it possible
to slim down the i.MX6 dtbs at a later point.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reset GPIO now handled from DTS, no need to touch this in the board.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch includes update i.MX51 template and porting some barebox
DTS files to use new template.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Start a 2nd stage barebox with the Linux Kernel calling convention.
Right now barebox does not interpret ATAGs or devicetree passed
to it, but it doesn't hurt to pass parameters so that future bareboxes
can use them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the place for the atags now is determined automatically the call
from the boards can be removed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a board does not specify a place for the atags list default to
SDRAM start + 0x100. The vast majority of boards uses this place
anyway, so the call to armlinux_set_bootparams() can be removed
for most boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The IPU has a fractional pixelclock divider. When used, this produces
clock jitter which especially LVDS transceivers can't handle. Allow
to disable it via platform_data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With the IPU the way the display is connected is completely independent
of the framebuffer pixel format. So instead of specifying a pixel width
in platform_data we have to specify how the display is connected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
am33xx_register_ethaddr must be called before cpsw driver start.
Move it from devices_initcall to coredevice_initcall.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add compatible phytec,pcm051
clean up pinmux_emac_rmii1_pins
introduce davinci_mdio_default pin group
set AM33XX_MAC_MII_SEL via dts rmii-clock-ext
use bch8 as ecc mode
add pagesize to 24c32@52
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Beaglebone and the AM335x Phytec phyCORE can be compiled
together, so merge the configs into a am335x_mlo_defconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the boot information in the image itself and passing a pointer
around between images is cumbersome and doesn't fit well with multiimage
support where the pointer we pass around is already occupied by the
devicetree.
Do the same as U-Boot does and store the boot information at the bottom
of the SRAM public stack.
To maintain the compatibility between new xloaders and older barebox
binaries we still pass the boot information to the next stage via pointer.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Lucas Stach
Steffen Trumtrar
Lucas Stach
Jesús Guitarte
Alexander Shiyan
Jan Weitzel