Similar to the OMAP boards mount the SD card to /boot and expect
the environment as /boot/barebox.env
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
For DDR2 RAMs, regs->zq_config is not used, which causes the
AM33XX_EMIF4_0_REG(SDRAM_CONFIG) register to be left unconfigured, resulting
in boot failure.
It seems that the DDR2 case was missed during the consolidation in commit
9f122f8bf0. The actual call for the Bone was
removed in 88659d9c4a.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The function am33xx_get_cpu_rev may be called before barebox_arm_entry(),
so we need to avoid switch statements. One example is the BeagleBone,
where we use this function to differenciate between the white and black
variants.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To keep things clean I removed all support for the old way to build
images. There is now a single tegra_v7 defconfig which builds both
supported Tegra boards as images.
The new image generation also paves the way for integration of the
tegra-cbootimage tool to produce directly flashable images.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that tegra arch is both DT only and forced relocatable
there is nothing interesting left in here.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is nothing technically preventing a single Tegra 20/30
image to be built. Don't force this split in Kconfig.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Drop useless BUG(), we are too early for them to be of any use.
Make sure we build the AVP code as ARMv4 even in PBL case.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It seems GCC 4.8 tries to be clever by not inlining some of those
functions. This causes havok, as it's absolutely required to inline
the early startup function, otherwise we may end up calling ARMv7 code
on the ARMv4 AVP.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/arm/boards/vexpress/init.c: In function 'vexpress_core_init':
arch/arm/boards/vexpress/init.c:139:22: warning: 'hostname' may be used uninitialized in this function [-Wmaybe-uninitialized]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fixes:
arch/arm/boards/edb93xx/edb93xx.c: In function 'edb93xx_console_init':
arch/arm/boards/edb93xx/edb93xx.c:123:2: warning: implicit declaration of function 'free' [-Wimplicit-function-declaration]
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This introduces some new environment variable helpers and updates
the existing ones. Newly introduced are:
getenv_bool: read a bool variable
getenv_ul: read an unsigned long variable
getenev_uint: read an unsigned int variable
getenv_nonempty: like normal getenv, but does return NULL instead of an
empty string
All new helpers take a pointer to the value. This value is only modified
when the variable exists. This allows the following programming scheme:
unsigned int myvalue = sanedefault;
getenv_uint("myvalue", &myvalue);
So without checking the return value myvalue contains the best possible
value.
getenv_ull is updated to this scheme.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The driver didn't work well with at24 driver. NACKS are lost.
Errors are lost in isr due to the local variable err. Also we didn't wait for
bus free in omap_i2c_xfer_msg.
Fix issues and get other improvements from linux kernel
Tested on OMAP4 and AM335x
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The OMAP ROM code passes the boot information via r0 to the
bootloader. Add an OMAP specific barebox handler to pass this
information to the next stage. This allows us to chainload
bootloaders without loosing the information where we booted from.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Include mach/generic.h where omap_set_bootmmc_devname is declared.
Change the argument of omap_set_bootmmc_devname to const char *
to fix the resulting conflicting prototypes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will be used to force the update or the start test mode
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The bootm code is now independent from the actual bootm command, so
compile the ARM specific bootm code based on CONFIG_BOOTM and not on
CONFIG_CMD_BOOTM.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The data caches should be invalided once during startup. This should
also be done when we do not have the MMU enabled in barebox because
the Kernel does not invalidate the caches during start.
To make this sure this patch enables the arm_early_mmu_cache_invalidate
function even if MMU support is disabled. Additionally this patch adds
calls to arm_early_mmu_cache_invalidate in start.c and uncompress.c.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some of the irq can still be on after a reset or power on as the IP are
powered by the backup power. This could lead to an interrupt dead lock
when the kernel boot. So disable them before booting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if the macb's mac is not a valid public mac set a private with "smf" as OUI
as the mac address might be set by the previous bootloader
set a private with "smf" as OUI for asix
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The data caches should be invalided once during startup. This should
also be done when we do not have the MMU enabled in barebox because
the Kernel does not invalidate the caches during start.
To make this sure this patch enables the arm_early_mmu_cache_invalidate
function even if MMU support is disabled. Additionally this patch adds
calls to arm_early_mmu_cache_invalidate in start.c and uncompress.c.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can always found it and not confuse it with a usb stick device
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some of the irq can still be on after a reset or power on as the IP are
powered by the backup power. This could lead to an interrupt dead lock
when the kernel boot. So disable them before booting.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can specify the devname in the board
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- USB1 is host (tested with a mass storage)
- USB0 is device (quickly tested with DFU)
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
They are currently unused by the board. Enable them anyway to get
compile coverage for the drivers which are otherwise currently unused
in mainline
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
we need to power on the PLL when enabling the USB clock.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this fix :
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c: In function 'cfa10036_devices_init':
arch/arm/boards/crystalfontz-cfa10036/cfa10036.c:123:3: warning: implicit declaration of function 'imx_gpio_mode' [-Wimplicit-function-declaration]cfa10036: fix warning
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- compile in thumb2 mode for a smaller binary
- increase TEXT_BASE to get more memory space
- set malloc size to zero for autodetection
- enable some more commands
- disable MCI_STARTUP, it's no longer needed and saves some time
during boot
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Convert to static inline functions and use lower case letters for function
names. Also, include mach/debug_ll.h when an architecture provides support
for debug_ll, not only when it's actually enabled. This allows architecures
to put some UART initialization code into mach/debug_ll.h which is compiled
out when debug_ll is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Card detect should be rather muxed as gpio then
mmc0_sdcd, as driver does not support this.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add function for indirect access of the mmd registers, based on linux.
phy_read_mmd_indirect
phy_write_mmd_indirect
Also clean some private mmd functions
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using here now the initialisiation functions in
am33xx_generic.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Use now the initialisation functions from am33xx_generic.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
There is a lot of duplicate lowlevel code between the
am33xx boards. Move this code to am33xx_generic and
create structs for sdram settings.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Function should use lower case letters. Also give this function
more namespace. While at it include io.h rather than asm/io.h.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
omap_save_bootinfo derefences the argument passed to barebox without
checking it for validity. This breaks 2nd stage booting where r0
is undefined. The best we can do is to check whether the pointer is
somewhere in SRAM and is word aligned. This at least makes sure that
we do not oops. This introduces SoC specific xxx_save_bootinfo variants
since the SRAM addresses/sizes differ between SoCs.
Additionally fix the prototype for omap_save_bootinfo. It uses r0, so
it must be passed this variable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a omap_set_bootmmc_devname function which can be used
to specify the MMC boot device. In an xload configuration this
is then used to load the next stage. In a regular build this is
used to mount /boot.
Also a device_detect_by_name is added to allow to disable probing
for sd/mmc cards during startup.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
SPI NOR flash can be detected by driver so no platform data
is necessary.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
-Added mlo spi NOR copy handler
-This handler will convert the MLO to big endian
-Tested with pcm051 board
Signed-off-by: shravan <shravan.k@phytec.in>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX53 qsb has 1GiB of memory, but it's divided into two non
contigous banks. Remove the wrong memory node since it's overwritten
with the correct values during runtime anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The oscillator frequency varies on different AM33xx boards.
Pass the osc frequency from lowlevel board code
to set the correct one on every board.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Reviewed-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The esdctl devices are currently not in the devicetrees. this means
they are not registered when booting from the devicetree. Move the
device registration from soc_devices_init to soc_init which is called
even with devicetree support so that we get esdctl devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gpiolib user have nothing to define in their machine
specific gpio.h, so do not include it.
The only thing they could define would be ARCH_NR_GPIOS,
but currently no architecture defines it. Should an architecure
feel the need to do it this would be a good opportunity to
get rid of this limitation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using __ASM_MACH_IOMUX_H will break once we introduce a
iomux.h which uses exactly this string as double include
protection. Use a SoC specific string instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mvebu boards use the BOARD make variable for the kwbimage
generation. This only exists in the old way, so move the mvebu
board Makefile entries back to arch/arm/Makefile until they
are converted to multiboard.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With OF clock providers, we can now remove temporary clocks and clock
aliases. Also, non-DT device probing for timer and serial is removed.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds of_clk_providers for core clocks and clock gates found on
Marvell MVEBU SoCs (Armada 370, Armada XP, Dove, and Kirkwood).
It is based on Linux clock providers with clock flags removed, as they
are not used on Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Calling globalvar_add_simple() and setting a value is more than common.
Add a parameter for the initial value.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Timer node was missing a clocks property to core_clk 0 (tclk). Add it
and while at it, also fix a whitespace issue.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch placed the flattened devicetree to armlinux_bootparams.
armlinux_bootparams normally is at SDRAM_START + 0x100. The kernels
initial page tables are normally at SDRAM_START + 0x4000, so the
flattened devicetree gets overwritten once it exceeds 0x3f00 bytes
which is quite common.
Revert this patch for now once a better solution can be found
This reverts commit 0c4108f917.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alexander Shiyan <shc_work@mail.ru>
NAND_WPN is not used on PCM051 so create own NAND
pin mux struct.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Pass the TEXT_BASE to the mk-am35xx-spi-image as the
default address does not fit for AM33xx.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on the same commit in the Kernel:
| commit 828b1716459d00b3d57d4309d25a8d1ea241116a
| Author: Shawn Guo <shawn.guo@linaro.org>
| Date: Thu Jul 11 13:58:36 2013 +0800
|
| ARM: dts: imx: share pad macro names between imx6q and imx6dl
|
| The imx6q and imx6dl are two pin-to-pin compatible SoCs. The same board
| design can work with either chip plugged into the socket, e.g. sabresd
| and sabreauto boards.
|
| We currently define pin groups in imx6q.dtsi and imx6dl.dtsi
| respectively because the pad macro names are different between two
| chips. This brings a maintenance burden on having the same label point
| to the same pin group defined in two places.
|
| The patch replaces prefix MX6Q_ and MX6DL_ with MX6QDL_ for both SoCs
| pad macro names. Then the pin groups becomes completely common between
| imx6q and imx6dl and can just be moved into imx6qdl.dtsi, so that the
| long term maintenance of imx6q/dt pin settings becomes easier.
|
| Unfortunately, the change brings some dramatic diff stat, but it's all
| about DTS file, and the ultimate net diff stat is good.
|
| Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to pass the DCD data from the boards. This patch allows
to optionally skip passing DCD data. In this case the DCD data
from the flash image is used if present.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel commandline is an important debugging aid when people
ask why their Kernel won't start, so print it unconditionally.
This is done in !dt mode anyway, so also do it with dt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Phytec phyFLEX-i.MX6 board. The phyFLEX-i.MX6
is a system-on-module based on the Freescale i.MX6 SoC. This patch supports
the 1GiB and 2GiB variants on a PBA-B-01 baseboard.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The convenience wrapper also contains the bch resources to
get rid of the hardcoded base in the driver in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the apbh dma engine is also found on i.MX6 move the header file
out of MXS specific directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS specific devices have some common infrastructure in the kernel
known as STMP devices. We have the same in barebox, but with a
mxs_ prefix instead of a stmp_ prefix. As some STMP devices are
also found on i.MX6 move the common infrastructure out of MXS
specific files and use the stmp_ prefix.
This is done in preparation for i.MX6 NAND support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:
- locks removed
- The splitting in different files we had to better support different
features has been dropped. Instead this is now done mostly with the
use of __maybe_unused
Some barebox adjustments are forward ported, like:
- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With other changes coming into the tree the binary is getting too big.
Save some space by not registering devices for which no support is available.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of making a pure 32bit write to a read/modify/write
operation with sr32 use writel directly. This saves a few bytes
of binary space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Successfully boots to console via kwboot. No other functionality yet.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This drops support for storing the environment in the eMMC,
but the standard bootsource is the SPI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves support for MC34708 PMIC into mc13xxx driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In some cases, the address of the devicetree, which is obtained
dynamically, may be located in the kernel text area, which leads
to overwrite devicetree by kernel. The patch uses the address for
devicetree, provided by board, if it possible.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ifdefs around the SoC specific boot_nand_external functions
can be removed when all functions go into their own sections so
that the linker can discard the unused functions.
This also adds a #ifdef BROKEN around the i.MX21 code which currently
does not have the imx21_barebox_entry function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of ifdeffing out the correct NFC base address just pass
it to imx_nand_load_image which is called from SoC specific
context anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All boards using the external nand boot code autodetect the
pagesize, so make this nonoptional to make the code simpler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the GK802 'QUAD CORE Mini PC', which seems to be loosely
based on the Freescale i.MX6Q HDMI dongle reference design.
It is supposedly identical to the Hiapad Hi802.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
pcm051 uses four MLO NAND partitions, so the default offset
to the barebox can not be used. Pass custom struct.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The size and offset of the barebox partition in nand and spi nor flash
may vary on different boards. Make it possible to pass this information
over boardfile if needed.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ROM loader passes the address of a buffer to the MLO in
register 0. Store this data so we can find the boot source later.
On the same way the bootinformation are passed to the barebox,
then. It has to be enshured that r0 contains always the
buffer or the boot source detection will not work.
Applied this on all OMAPs. This patch is based on work of
Jan Luebbe <jlu@pengutronix.de>.
Compile tested on all OMAP boards.
Tested on pcm049, phyCARD-A-L1 and pcm051.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Tested-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds first stage support for PCM051.
Signed-off-by: Shravan kumar <shravan.k@phytec.in>
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The compiled in dcd images generate an intermediate assembly file. Instead
of generating them as *.S generate them as *.dcd.S to better identify them
as generated files. These are then added to .gitignore.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old way to boot tiny210 was to restart barebox after loading stage2 image.
This turned out to be unstable and stopped working after barebox refactoring.
Now jump to the same position in the loaded code instead of starting it from
the very beginning.
Signed-off-by: Alexey Galakhov <agalakhov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Renamed SPI NOR device from nor0 to m25p0,
to make booting from it possible.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This reverts commit 08c0e206b3.
The external NAND boot code currently uses the _text linker variable
to determine a place for the image. This doesn't work with multi image
support which will link the binary at 0x0. Revert multi image support
for the pcm038 for now until a solution is found.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We just keep one on rm9200ek as I did not yet convert this SoC init to C
struct and still use Macro.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to drop the config.h and switch to multi board support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
we now use a UBI Volume instead of user_block, kernel and root
the bootloader size is 320KiB not 256KiB
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds clock aliases for spi controllers found on Dove to allow
spi driver to get tclk frequency.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
