Solidrun has renamed the Carrier-1 to Hummingboard.
This is also the name that is used in upstream Linux,
change barebox to be in line with that.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the 1GB variant is supported for now, as I don't
have anything other to test with.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the ANATOP_SI_REV register we can only distinguish between
i.MX6q/d and i.MX6dl/s SoCs. Take the number of cores into account
to get the exact SoC type.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The IPU has a fractional pixelclock divider. When used, this produces
clock jitter which especially LVDS transceivers can't handle. Allow
to disable it via platform_data.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With the IPU the way the display is connected is completely independent
of the framebuffer pixel format. So instead of specifying a pixel width
in platform_data we have to specify how the display is connected.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Before we jump to SDRAM where we just copied our code we have to
invalidate the instruction cache.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The image will be named after the official name of this board:
barebox-freescale-mx6-sabreline.img
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
A lot of files rely on include/driver.h including include/of.h (and
this including include/errno.h. include the files explicitly so we can
eventually get rid of including of.h from driver.h
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Convert to static inline functions and use lower case letters for function
names. Also, include mach/debug_ll.h when an architecture provides support
for debug_ll, not only when it's actually enabled. This allows architecures
to put some UART initialization code into mach/debug_ll.h which is compiled
out when debug_ll is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The esdctl devices are currently not in the devicetrees. this means
they are not registered when booting from the devicetree. Move the
device registration from soc_devices_init to soc_init which is called
even with devicetree support so that we get esdctl devices.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
gpiolib user have nothing to define in their machine
specific gpio.h, so do not include it.
The only thing they could define would be ARCH_NR_GPIOS,
but currently no architecture defines it. Should an architecure
feel the need to do it this would be a good opportunity to
get rid of this limitation.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With multiboard support the compiletime generated BOARDINFO string
gets more and more meaningless. This removes it from Kconfig and
replaces it with a variable that can be set at boardlevel.
Also many boards have a standard setting for the hostname in the
environment. This patch also moves the standard to C code by calling
barebox_set_hostname().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to pass the DCD data from the boards. This patch allows
to optionally skip passing DCD data. In this case the DCD data
from the flash image is used if present.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Phytec phyFLEX-i.MX6 board. The phyFLEX-i.MX6
is a system-on-module based on the Freescale i.MX6 SoC. This patch supports
the 1GiB and 2GiB variants on a PBA-B-01 baseboard.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The ifdefs around the SoC specific boot_nand_external functions
can be removed when all functions go into their own sections so
that the linker can discard the unused functions.
This also adds a #ifdef BROKEN around the i.MX21 code which currently
does not have the imx21_barebox_entry function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of ifdeffing out the correct NFC base address just pass
it to imx_nand_load_image which is called from SoC specific
context anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All boards using the external nand boot code autodetect the
pagesize, so make this nonoptional to make the code simpler.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add support for the GK802 'QUAD CORE Mini PC', which seems to be loosely
based on the Freescale i.MX6Q HDMI dongle reference design.
It is supposedly identical to the Hiapad Hi802.
Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This reverts commit 08c0e206b3.
The external NAND boot code currently uses the _text linker variable
to determine a place for the image. This doesn't work with multi image
support which will link the binary at 0x0. Revert multi image support
for the pcm038 for now until a solution is found.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>