- this is taken from freescale-mx35-3-stack/3stack.c and allows
this board to run Freescale's kernel which relies on the system
revision to configure the correct PMIC.
- On rev0 boards (with DA9053), the log is :
detected i.MX53 rev 2.1
MCIMX53-START board 1.0
On newer boards (rev A or B with MC34708), the log is :
mc34708-i2c@mc34708-i2c0: MC34708 ID: 0x0014
detected i.MX53 rev 2.1
MCIMX53-START-R board 1.0 rev B
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
and register mc34708 which is present on MCIMX53-START-R board
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some variants of the i.MX53 do not allow to run at 1GHz, so
pass a cpu frequency parameter to the lowlevel init function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- move code which can be shared between i.MX53 and i.MX51
to a common file
- rename mx53_init_lowlevel to imx53_init_lowlevel
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we have a bootm command which boots everything we can
simplify the defaultenvironment. We can call bootm on every
image type and can remove the kernelimage_type variables.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To allow for some generic io accessors introduce io.h and use
this instead of asm/io.h throughout the tree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Updated mx53 ddr3 script in order to align with the latest Freescale version from July 8, 2011:
-change ESDREF[REF_SEL]=01 (for 32KHz), from incorrect setting of 00 (64KHz)
-change DDR3 MR0 write to "setmem /32 0x63fd901c = 0x052080b0" from "0x092080b0".
This changes write recovery from 8 clocks to 6 clocks(in line with ESDCFG1[tWR])
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The new MMU setup will need SDRAM base addresses and sizes.
For this reason convert the MMU enabled ARM boards:
- move mem setup to mem_initcall. This is early but
still makes sure that we already have the console available
- move MMU setup in this initcall temporary as after the mmu_init will generic
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>