5cd60cb217
ARM: add __noreturn to board_init_lowlevel_return
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:38 +01:00
5b03b8148f
ARM: Add new entry point for barebox
...
Memory is a precious resource, so it makes sense to make it available as
early as possible. By definition the lowlevel init code already knows where
to find memory because it's the lowlevel init code which sets up the memory.
Until all boards are converted this new entry is just a fallback to the old
entry point.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:38 +01:00
56325edd79
Merge branch 'for-next/pbl'
2013-02-04 15:49:07 +01:00
cfb14ce242
Merge branch 'for-next/omap'
2013-02-04 15:49:07 +01:00
0b12784089
Merge branch 'for-next/oftree'
...
Conflicts:
drivers/of/base.c
2013-02-04 15:49:04 +01:00
da5fe0ba47
Merge branch 'for-next/misc'
2013-02-04 15:49:00 +01:00
9c5172fac2
Merge branch 'for-next/imx-usb-chipidea'
2013-02-04 15:48:53 +01:00
265e6da19d
Merge branch 'for-next/imx'
2013-02-04 15:48:53 +01:00
22e2544809
Merge branch 'for-next/compile-log-level'
...
Conflicts:
drivers/usb/host/ehci-hcd.c
2013-02-04 15:48:51 +01:00
1b575024f6
Merge branch 'for-next/at91'
...
Conflicts:
arch/arm/boards/at91rm9200ek/init.c
arch/arm/boards/pm9263/init.c
arch/arm/configs/at91sam9n12ek_defconfig
arch/arm/mach-at91/Kconfig
2013-02-04 15:48:43 +01:00
ab5418b570
sama5d3k: the nand flash is 4 bit ecc capable so use it
...
this will require to update the bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 09:49:56 +01:00
8b30a67cab
usb-a926x: only provide the resource if the driver is enable
...
usefull for bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 09:45:33 +01:00
6179d67536
at91sam9_ddrsdr: fix register on mdr read and sdram detection for ddr size
...
it's currently working by luck
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 09:44:41 +01:00
01105421e3
omap3: fix debug_ll uart base
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-02 08:49:16 +01:00
13b0a5a271
defenv-2: migrate guf-vincell to config-board
...
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:21:23 +01:00
b9b70868b7
at91: bootstrap: add menu support
...
This will allow to change the boot mode
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:16:33 +01:00
4bd5ceee72
at91sam9261ek: add first stage support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-31 19:14:07 +01:00
2754a114ba
at91sam9261ek: add boostrap support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-31 19:13:58 +01:00
dc2da4fef1
at91sam9261ek: add spi support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-31 19:13:45 +01:00
41d3371741
at91: introduce AT91_LOAD_BAREBOX_SRAM to specifcy which size load for external boot
...
Some SoC as sam9261 or sam9263 have enough sram to directly load a barebox
from external boot.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-31 19:13:09 +01:00
7e30422d72
sama5d3xek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:07:46 +01:00
3a934cedd2
sama5d3: add lcd support
...
the sam9x5 have multiple overlay but only register the base one
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:07:46 +01:00
6858e091df
at91sam9n12ek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:07:46 +01:00
9b9d765098
at91sam9n12: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:05:50 +01:00
a856d8d582
at91sam9x5ek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:05:50 +01:00
b43287e220
at91sam9x5: add lcd support
...
the sam9x5 have multiple overlay but only register the base one
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:05:50 +01:00
f15fb7b428
video: add Atmel HLCD support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:05:50 +01:00
5862bd4faf
pcm049: clean up defconfig
...
add BAREBOX_MAX_IMAGE_SIZE and rebuild defconfig with savedefconfig
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-30 22:35:16 +01:00
08147d427f
pbl: add none compression support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-30 22:32:13 +01:00
f73a37aa78
pbl: factorise decompressor
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-30 22:32:13 +01:00
7eed7b91c3
ARM OMAP: use SZ_*M constants in RAM device register functions
...
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-30 22:21:11 +01:00
a719d7c445
ARM: at91: Add Telit EVK-PRO3 board support
...
http://www.telit.com
Based on at91sam9260ek board support.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-30 16:02:33 +01:00
21535815bf
at91: add sama5d3xek board support
...
currently missing the GMAC support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-30 08:24:48 +01:00
ca30fb634c
at91: add sama5d3 support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-30 08:24:39 +01:00
1f987a1133
at91: add clock dump command
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-30 08:24:35 +01:00
4db0a48aec
Merge branch 'pu/omap' into for-next/omap
2013-01-29 23:19:50 +01:00
13ecb8a8f4
at91sam9m10ihd: set missing lcd power control
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 11:44:53 +01:00
f7e3126619
macb: allow to pass the phy interface
...
as we will add later the GMAC IP verion support (GEM)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 11:44:49 +01:00
b043950ccc
ARM: efika-mx-smartbook: clean up whitespaces
...
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 10:01:39 +01:00
dc3400f53f
ARM omap3 beagle: Compile xload defconfig in Thumb2 mode
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 09:46:26 +01:00
75536f898b
ARM am33xx beaglebone: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 09:46:22 +01:00
2f9a2bf635
ARM omap3 omap3evm: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 08:48:28 +01:00
8acd8a37f6
ARM omap3 omap343xdsp: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 08:46:23 +01:00
52e321255c
ARM omap3 phycard-a-l1: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 08:42:50 +01:00
4b789b49e0
ARM omap3 beagle: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 08:42:26 +01:00
369797daee
at91sam9260/9g20/9261/9g10/9263: split soc lowlevel_init from generic
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
bfa778fde3
at91sam9263ek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
227dae0c72
at91sam9261ek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
9d8cef4687
at91sam9m10ihd: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
6d8a951667
at91sam9m10g45ek: add lcdc support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Michael Olbrich
Jan Weitzel
Antony Pavlov
Fabio Porcedda