This fixes
barebox@Very long board name:/ crc32 -f /dev/mem 0x83f00000+0xfff
CRC32 for /dev/mem 0x83fff000 ... 0x83fffffe ==> 0xa080584bbarebox@Very long board name:/
The problem here was that the return value of
lseek(fd, 0x83f00000, SEEK_SET) (which is 0x83f00000) was casted to an
int (which is -2081423360), returned to do_crc and interpreted as
error there without yielding another error message.
This also makes
crc32 -f /dev/mem 0xffffffff+0x1
die on a NULL pointer exception instead of reporting:
lseek: No error
:-)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since this commit we interpret the argument to the bad block ioctls
as a pointer to a 64bit number:
|commit e71c343668
|Author: Sascha Hauer <s.hauer@pengutronix.de>
|Date: Fri Oct 14 11:57:55 2011 +0200
|
| mtd: fix arguments to bad block ioctls
|
| In the Kernel the mtd ioctls expect a pointer to the offset, whereas
| barebox interprets the pointer itself as an offset. Since we want
| to add 64bit support for file sizes a pointer may not be sufficient,
| so align with the kernel and convert it to a pointer to the offset.
|
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This missed some places, fix them aswell.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Without arguments the 'md' command defaults to show address 0 which
likely results in a NULL pointer exception, so only three keystrokes
are necessary to crash barebox. Show usage instead if 'md' is invoked
without arguments, so that it at least requires an address to be given
to crash barebox. This increases the stability of barebox by 66%. Hurray!
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The standard devices are currently broken since they have
the size ~0. As now files use loff_t as file size which is a signed
type the read implementation gets confused and now returns -1.
The current implementation also has the (somewhat theorical) problem
that we do not have real streaming devices, so /dev/zero went out
of zeroes after reading 4GB (or now LLONG_MAX).
This patch introduces a new cdev flag DEVFS_IS_CHARACTER_DEV and a new
file size flag FILE_SIZE_STREAM which makes it possible to create
real stream devices instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Command "uncompress" can handle not only with LZO-format, so we just
changed description for command.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a command to sleep for n milliseconds.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Change function name to command_var_complete in all calls and its declaration.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch allows to present "/dev/zero" always in system and not
depending of mem-command. Standard files allow to test other memory
devices, not only "mem", such as NOR, NAND, MCI-devices e.t.c.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds a simple wd command which can setup, trigger and stop a watchdog
on the platform.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
resource_size_t can be 32bit or 64bit depending on the architecture.
Add a define for it to be able to printf a resource_size_t correctly
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It turns out useful to be able to configure bootm before its usage.
This allows us to overwrite bootm settings on an individual base.
This patch adds global variables to configure the kernel image, the
initrd image and the devicetree image. These values will be used
unless overwritten explicitely with command line switches.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The patch making errno a positive value has another bug:
lseek was switched to return -errno instead of -1. This does not
work since we can lseek we can address the whole 4G address space,
have of which has a negative offset when interpreted as a signed
integer. Let lseek return -1 on failure again instead.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When invoked from a skript it's useful to know which file is edited. Also
Add information how to exit the editor to the status line.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We currently use the environment variable 'bootargs' to get the
Linux bootargs. This patch allows for a more flexible bootargs
generation using global variables. With it the Linux bootargs
are concatenated from multiple variables. This allows to replace
parts of the bootargs string without having to reconstruct it
completely.
With this bootargs can be constructed like:
global linux.bootargs.base="console=ttyS0,115200"
global linux.bootargs.ip="ip=dhcp"
global linux.mtdparts="physmap-flash.0:512K(nor0.barebox),-(root)"
This will then automatically be combined into a kernel bootargs
string during boot.
If the 'linux.bootargs.' variables are all empty the old standard
'bootargs' way will be used.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This implements global shell variable support. This is done by registering
a new device named 'global', so global variables are just plain device
parameters.
Global variables are useful for storing the global state in the environment.
Currently we do this by sourcing scripts instead of executing them which is
quite limiting.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Normally errno contains a positive error value. A certain unnamed developer
mixed this up while implementing U-Boot-v2. Also, normally errno is never
set to zero by any library function.
This patch fixes this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Running i2c_read without the 'count' setting causes an error and reboots.
barebox@Phytec phyCORE-i.MX27:/ i2c_read -b 1 -a 0x4a -r 0x00
ERROR: out of memory
no stack data available
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The following patch serie improve the complete support
by adding a complete framework to aalow commands complete support.
The add also car complete support for eval and setting and executable
file support
This also include an update of the stringlist API to support asprintf
API
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=rYfw
-----END PGP SIGNATURE-----
Merge tag 'complete_update_support' of git://git.jcrosoft.org/barebox into next
improve complete support
The following patch serie improve the complete support
by adding a complete framework to allow commands complete support.
The add also car complete support for eval and setting and executable
file support
This also include an update of the stringlist API to support asprintf
API
bootm_initrd tests for data->initrd, but this never becomes true because
the settingof data->initrd is inside a if(bootm_initrd()). Fix this. Also,
do not support the initrd options when initrd is disabled.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to have a quite slow algorithm to detect the screen size
which was unused for long time. This patch changes this to first
set the cursor to x=999, y=999 and the read back the actual cursor
position. Since I am not confident that this works on all terminals
this is only used when edit is called as 'sedit'.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Arm needs 64-Bit alignment of the oftree as mentioned in the documentation
Documentation/arm/Booting.
Other architectures may need a bigger alignment so align to 4K.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The intention of this code was to check the return value of fdt_open_into. Fix
this.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- print error message when the specified oftree cannot be opened
- move verbose info to top of function so that the information is
printed before something else fails.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Android Image contains 3 components and params
- kernel
- initrd
- second stage (optional)
- tags addr
- bootargs
In fast boot the initrd is mandatory, in barebox we are less restrictive
use the initrd only if present
add to env params:
aimage_noverwrite_bootargs
Disable overwrite of the bootargs with the one present in aimage
aimage_noverwrite_tags
Disable overwrite of the tags addr with the one present in aimage
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
From bd6c5c884337ae2d4ef41d85d59c2d5ec525f8a5 Mon Sep 17 00:00:00 2001
From: Uwe Hermann <uwe@hermann-uwe.de>
Date: Fri, 6 Apr 2012 17:30:01 +0200
The loady command seems to work just fine (tested on an S3C2440 target).
Also, mark it as TRISTATE like loadb and loads.
Signed-off-by: Uwe Hermann <uwe@hermann-uwe.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to automatically prepend the device name before the partition
name. So when we added a partition named 'barebox' to a device named
'nor0' the partition was named 'nor0.barebox'.
The Kernel can mount its rootfs based on the mtd name, for example with
root=mtd:root. If for example we have multiple mtd devices (nor and nand)
'root' is a bad name for the partition, it should better be 'nor0.root'
This patch adds an additional commandline switch to addpart to optionally
skip the automatic device name adding. This makes it possible to define
our mtd partitions like this:
nor_parts="512k(nor0.barebox)ro,128k(nor0.bareboxenv),2M(nor0.kernel),-(nor0.root)"
This way the barebox partition names stay the same, but we can now
pass the exact name to the kernel (root=mtd:nor0.root).
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We normally do not expect USB devices to be hotplugged. Instead of
rescanning each time the usb command is called, scan only once.
This makes the usb command safe for being called multiple times
without making already registered USB devices reinitialized. To
really scan multiple times a '-f' option is introduced.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds an automount command which makes it possible
to execute a script when a certain directory is first accessed.
It's the commands responsibility to make this directory available
(bringing devices up and mounting it). This results in automount
support which makes sure that from the shell every file can
be accessed without having to care for device bringup. Bringing
up devices may be expensive (USB, dhcp). The automount support
makes it easy for the environment to bringup devices when they
are actually needed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
every struct fs_device_d contains a struct mtab_entry, so they
have a 1:1 relationship. Instead of having to use container_of
to get from a struct mtab_entry to a struct fs_device_d we can
better embed the members of struct mtab_entry into struct fs_device_d
directly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This shrinks the resulting binary size by ~25%. Exceptions
are still handled in arm mode, so we have to explicitely
put .arm directives into the exception code. Thumb-2 mode
has been tested on i.MX51 Babbage board.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To make the code a bit easier to read. Also, do not allow
to umount / when something else is mounted.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add nandtest command to test nand devices
and display ecc stats at the end of test.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It makes no sense to check the filename pointer here, because a) we have
already been using it and b) argc has been tested against 1 already, so
argv[1] should not be NULL. So, drop the checks.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The uimage command superseeds the iminfo command. Unlike
the iminfo command the uimage command can also be used
to verify the data crc on demand and to extract uImages
to files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the bootm code to the new uimage code. Also
bootm can now handle other types of images than uImages.
Currently the only architecture making use of this is
arm which allows to boot zImages, raw images and barebox
images.
I intended to make a more bisectable series from this but
I failed becuase there are many dependencies and no matter
how I tried the patches grew bigger and and bigger. So I
decided to put this all in a single patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to execute a program of the host from barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If parameter -v without a crc is used, you got a notice but the crc is
calculated and exit status is 0.
With wrong parameters we should quite with COMMAND_ERROR_USAGE.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This simplifies the code somewhat. The user visible change here is
that we now ignore the compression specified in the uImage. Instead
we detect the compression type from the data which also means that
we now support lzo compressed uImages.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the new uncompress function we can now implement a command which
can uncompress all known compression types. This supplements the unlzo
command.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead, let the user select them manually so that bootm supports
all compression types compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel uncompression functions have a unified API. Switch
to the kernel implementation to unify the different uncompression
APIs. As a bonus the kernel implementation is much smaller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All handlers used to just relocate the image without any checks, so
we are doomed if we write outside of SDRAM or will overwrite ourselves.
Move the relocation up to the generic part where we have a chance
of catching these issues.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the uImage should be relocated to load_address. This is handled correctly
in gzip/bzip2 compressed images, but not in uncompressed images. fix this.
Also, when a variable is not used once without casting to another type it
probably means that its type is wrong.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The rests of U-Boots iminfo command are sitting in commands/bootm.c and
are in a nonusable state. Factor it out to its own file and make it work
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never had interrupt support in barebox and we have no plans to
add interrupt support. Even if we do I doubt the current fragments
of irq support are helpful, so remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mount without argument always print a "none" as device name mounted
because entry->parent_device is always NULL.
The problem is the mount function in fs/fs.c. parent_device is
initialized to NULL and never updated. With this patch,
parent_device is set with the mounted device name.
Moreover, the mount function has been modified to print the device
name plus device id using the dev_name function.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds basic device tree command support. So far we can
parse a flat device tree (-p), which also stores the tree
in memory, dump it (-d) and free (-f) the internally stored tree.
The chosen node can be updated with barebox bootargs, no other
device tree manipulation is implemented yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
rename it to digest_file_window
introduce digest_file to digest a file and digest_file_by_name
where we specify the algo by name
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
needed for multi image support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
you can choose the initrd via @<num>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as in barebox the data could be the mapped file or a allocated memory with
just the data (non header)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When ubi is deselected the ubi commands are still build and compiling fails
due dependences.
commands/built-in.o: In function `do_ubiattach':
commands/ubi.c:75: undefined reference to `ubi_attach_mtd_dev'
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a timeout is specified and expired the command will be executed
by default boot
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
it's part of the command and can not be compiled as an other module
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The interface emulates the Linux commands, except that you can
specify a sub area - E.G.:
barebox:/ md5sum /dev/fd0 2M+1M /env/config /env/bin/boot 10+2
61c4c0180b044191d28f27545f43562f /dev/fd0 0x00200000 ... 0x00300000
908b84bcbadd2f263583a65ff31d1cad /env/config 0x00000000 ... 0x000003a7
f23bd15825cc5006cf5f9fd486d82d2d /env/bin/boot 0x0000000a ... 0x0000000c
Adds around 1400 bytes (+ size of digest code) with everything enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Normally the default path to save the environment is /dev/env0. However,
we can't map a file in a fat filesystem to /dev/env0. So if we want to
store the environment in a file in fat we have to make it configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old way happily removed cdev entries which were no bb dev
at all. Fix this by checking if the given device actually is
a bb device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cdev operations are available without the complete file API,
so they are more suitable for internal usage.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's good to seperate the code which others can use from commands.
This way other users do not depend on the command being compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Environment variables are only useful in interactive environments.
Make it optional on our way to support a noninteractive barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes the USB command optional and makes usb_rescan a
global function. This way we can use USB in noninteractive
environments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nand command is for bad block handling which some do not need.
So make it optional, but with default y.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
fix this gcc 4.4 warning:
xyzModem.c: In function 'xyzModem_stream_open':
xyzModem.c:564: warning: 'dummy' is used uninitialized in this function
Copied from U-Boot
Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The m68k support is compile broken for a long time now and nobody
cared so far. We cannot keep the architecture uptodate with current
development wihtout being able to compile it. It's still in the
archives and can be re-added anytime once somebody cares for.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Last time I used the gpio commands I was somehow confused about the behaviour
of the 'gpio_get_value' command. So, I decided to add some doc for it. Here's
the result.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The function names do not make it clear what return value
is expected and do not save a single line of code. Put
the code inline and unbreak the wrong checks introduced
with a3c1e5d888.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Eric Bénard <eric@eukrea.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
add -F options to compare to file crc
it's usefull to compare what you flash in a partition
it's selectable by CONFIG_CMD_CRC_CMP
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before we duplicate it between command/bootm.c and scripts/mkimage.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before we duplicate it between common/bootm.c and scripts/mkimage.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow you to create a box style entry
via C API by specifying the type as
struct menu_entry me = {
.display "test",
.type = MENU_ENTRY_BOX,
.box_state = 1,
.action = action_to_run,
}
and via shell
menu -e -a -m <menu> -c <command> [-R] [-b 0|1] -d <description>
menu -e -a -m <menu> -u submenu -d [-b 0|1] <description>
-b with 0 for not selected and 1 for selected
and -c for the command to run when changing state
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to automaticaly run an entry if the user do no choice
this is usefull for boot menu as example
with menu -s -m boot -A 3 -d "Auto Boot in"
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before if you specify id = 0 the next available id will be taken
otherwise fail if already registered now as in linux we use -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>