This commit adds minimal support for the Marvell Dove SoC (88AP510) as
first SoC of the Marvell Orion family. Orion SoCs have a different timer,
therefore current mach-mvebu and Armada 370/XP Kconfig and Makefiles are
slightly modified and a new clocksource drivers is added.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This commit adds minimal support for the Armada 370 and Armada XP SoCs
from Marvell.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Taken from the Linux kernel, simplified and reworked to match barebox.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only a basic set of clocks is supported. This is a temporary solution
and will go away as soon as the port of the Tegra common clock code from
the Linux kernel is ready to go.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We will follow the Linux kernel and go devicetree only for Tegra. This
doesn't prevent specific code for certain boards, but always requires a
valid DTB for all boards.
Also regenerate the AC100 defconfig to reflect this change.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tegras main CPUs are all ARMv7.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Tested-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add basic support for the Xilinx Zynq-7000 EPP architecture.
The Zynq-7000 is an embedded processing platform that combines a Cortex A9
dualcore MPSoC with an Artix-7 FPGA.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- Add rules to generate dtb files in arch/arm/dts/
- add an initcall which unflattens and probes the internal devicetree
- Add skeleton devicetree
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for CLPS711X GPIOs. Driver based on
generic GPIO driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for COMMON_CLK API for CLPS711X targets.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds clocksource driver for CLPS711X targets and adds
support to platform to use this new driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
not enable as on qemu this generate a undefined instruction exception
Cc: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
detect the cpu model to dynamise the periphs mapping
currently only tested on qemu but should work on real hardware
Cortex-A9
if you use 1GiB of ram you can run the same barebox on Cortex-A15 or Cortex-A9
otherwise use vexpress_ca9_defconfig where the TEXT_BASE is at 0x63f00000
when we will add the relocation support this defconfig will be drop
qemu/arm-softmmu/qemu-system-arm -M vexpress-a9 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Cortex-A15
qemu/arm-softmmu/qemu-system-arm -M vexpress-a15 -m 1024 -smp 1 -kernel build/vexpress/barebox -pflash build/vexpress/flash0 -nographic
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
HAVE_CONFIGURABLE_MEMORY_LAYOUT was first meant as a feature, now it's a
feature to remove it. barebox on ARM now completely uses the memory passed
in from the lowlevel code and configures the malloc area and stack space
during runtime making it obsolete to hardcode these values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This architecture is a bit strange. It has up to four SDRAM banks, but
all have a quite limited size. The SDRAM size for the different boards
currently is unknown as it's configurable with Kconfig. We use a SDRAM
size based on the value of the only board we have in the defconfigs:
edb9301. This likely breaks other ep93xx boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All Samsung boards automatically detect their SDRAM size. The size detection
code can't be called safely from lowlevel C code, so instead the minimum SDRAM
size is guessed from the defconfig files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All boards use hardcoded SDRAM addresses, copied from the board init file.
OMAP3 boards are a bit special, they had a SoC specific reset() function. This
is renamed to omap3_invalidate_dcache() and called from the board lowlevel init
code now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Most i.MX boards can use the imx*_barebox_entry functions. The remaining
(i.MX21, i.MX6) use hardcoded base addresses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Hi Sascha,
I've made the changes you suggested in this resent patch.
Everything related to custom ATAGs has been moved to the board
directory.
The generic code does not make any references to feature lists or
bootloader versions.
About the setup_feature_list prototype:
it has been renamed to atag_appender
it's not a function, it's a pointer to a function. Can it have a
prototype other than it's own declaration?
All non-related changes has been dropped. They were checkpatch.pl
warnings unrelated to this patch.
Regards,
Vicente.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format, removing
extraneous lines and spaces. No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds lowlevel debug functions for i.MX. As we have a great variety
of different UARTs on i.MX currently no Kconfig support for chosing the
correct one is added. Instead we expect the user to add the correct
define and issue a compiler warning if he hasn't.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds new architecture (CLPS711X) into barebox.
The core-logic functionality of the device is built around an ARM720T
processor running at clock speeds up to 90 MHz.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sebastian Hesselbarth
Thomas Petazzoni
Lucas Stach
Sascha Hauer
Steffen Trumtrar
Alexander Shiyan
Jean-Christophe PLAGNIOL-VILLARD
Vicente Bergas
Carlo Caione