Although the spi chipselects should really be const, there is no
good way to fix the compiler warning, so remove the const.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers use gpio_request/gpio_free. Currently no architecture
has code behind these functions. Provide static inline functions
for these and remvoe the at91 specific inline functions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We need inline versions of armlinux_set* exactly when
CONFIG_ARM_LINUX is not set, because this is the symbol
used to compile the non inline versions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since commit 2f6b1f7690 the pull-up and
bitkeeper handling for i.MX23/28 is correct. But now it is important to
distinguish these pin features as their programmed bit values are different.
With this patch the bitkeeper and pull-up enable/disable bits are now handled
separately.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Barebox crashes since it has trouble with a resource size of 0. Most of the
S3C24XX based platforms crashes at runtime and can't use devices with resource
sizes of 0 anymore. This patch fix it by unifying the device registration for
all current Barebox's S3C24XX based platforms.
- A9M2410 and A9M2440 compile time tested only.
- Mini2440 also runtime tested.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
While a set bit enables the pullup (if exists) it disables the bitkeeper (if
exists). Both features are using the same register bit and only one of this
feature is present on a per pin base.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have the following in the tree:
|commit af42feb9d2
|Author: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
|Date: Mon Jan 2 11:49:17 2012 +0100
|
| ARM: set SCTRL[A] only when architecture does not support unaligned access
|
| Recent gcc generates code with unaligned access when architecture
| supports it. Setting A bit unconditionally causes data-aborts on such
| code rendering barebox unusable.
|
| Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
What the patch tried is correct: We should set the A bit only when the architecture
does not support unaligned accesses. To figure out whether the architecture supports
unaligned accesses the patch tested for the U bit which is wrong. The U bit may be
0 after a reset, so instead of testing for the U bit we have to set it. This can
be done on armv6 and later. All others have the A bit set to trap unaligned accesses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we now can change HCLK and VDDIO, we can now support writing to
OCOTP. Writing is done via a special data register. This is u32, so we
need to fill a temporary buffer when offset or count is not aligned. The
write is also protected by a special device variable.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Will the code more readable, especially since future additions are
planned.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Let's keep the timeout routine in a central place. We will need it more
often when we add write support.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
usbphy initializaion needs to access the power supply and has this
embedded. Refactor to a seperate power.c, since we need other accesses
in the future.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the watchdog is occupied for system reset. This usage collides with
the dedicated usage of a watchdog. This patch change the behaviour of at least
i.MX23/i.MX28 where the chipset supports a simple and powerful alternative
to reset the whole SoC (including the PMIC).
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We write a proper FCB, but no DBBT since it is unresolved how to keep it
in sync with Linux-based BBTs. Also, we imply searchcount = 4 and stride
= 64 (which is the default) until we can verify via ocotp.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Based on the U-Boot version. Changed to kernel style register layout, added
MX23 support (WIP!), made MMU aware and adapted to barebox.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Based on the U-Boot version. Changed to kernel style register layout, added
MX23 support, made MMU aware and adapted to barebox.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To avoid getting a different divider due to rounding errors when using
set_hclk later, use DIV_ROUND_UP for the returned value.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Juergen Beisert
Wolfram Sang
Jan Luebbe