nmon is a tiny monitor (<1200 bytes) program
for the MIPS processors.
It can operate with NO working RAM at all!
It uses only the processor registers and NS16550-compatible
UART port for operation, so it can be used for a memory
controller setup code debugging.
With no changes nmon should work on different MIPS
processors as it uses only common MIPS-I instructions.
nmon is inspired by mmon, MIPS VR4300 Mini-monitor.
mmon is copyrighted 1996, 2003 by Eric Smith.
Also Alexander Voropay must be noted for his work
on qemu & YAMON mmon adaptations made in 2006 and 2007.
See http://www.brouhaha.com/~eric/software/mmon/
for mmon details.
The mmon's features missed in nmon:
* batch memory dumps;
* byte and 16-bit half-words dumps and stores;
* fill memory;
* load S-records (this function make sense only
if RAM works properly).
nmon has only 4 commands:
q - quit to barebox
d <addr> - read 32-bit word from <addr> address
w <addr> <val> - write 32-bit word <val> to <addr>
g <addr> - jump to <addr>
Addresses and data must be given in hexadecimal.
Everything (including hex digits 'a'..'f') must
be in lower case.
EXAMPLE: change value of word with address 0xa0000000
nmon> d a0000000
00000000
nmon> w a0000000 12345678
nmon> d a0000000
12345678
nmon>
There is no error checking of any kind. If you
give an invalid address you will probably get
an exception which will hang the board and you
will have to press the reset button.
You can interrupt current command (e.g. you have
made error in input <addr> value) by pressing
the <ESC> key.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The fsl gadget driver wants to configure the portsc register
with information from platform_data. When registered from the
chipidea driver there is no platform_data. Fix the resulting
crash by not derefencing platform_data when NULL. In this
case the PORTSC register is not touched, it will have been
configured by the chipidea driver in this case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Being able to trace initcall is very useful when trying to
find out where startup hangs. This adds a kconfig option for
it to make it easier to access.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Probe ULPI phys during USB initialization and not during driver
probe. This lowers the pressure to have the necessary board specific
setup in place early.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to distinguish which USB port to fixup by pdev->id. This
is < 0 for devicetree probed devices all the time, so this won't
work anymore once we switch to devicetree. Do the fixup on every
port instead, it doesn't hurt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This makes cpu_is_* functions when necessary for upcoming multisoc
support. When only one SoC type is compiled in cpu_is_* still expand
to static values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds OMAP machine dependent framebuffer code so that
board files can make use of driver omap-fb.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds omap display controller support. Currently only
OMAP4 DSS is supported.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Chipsize didn't take number of LUNs into account. Sync chipsize calculation
to kernel commit 63795755
Tested with MT29F8G16ADBDAH4 on OMAP4
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If size of a flash image file is 0 ubiformat silently formats the volume.
Check size and abort if size == 0. This may be the case if an empty or tftp
mounted file is used.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When using devicetrees the boardinfo (or model) can be obtained
from the devicetree. Add a function to get the boardinfo so that
we have a chance to add information from the devicetree.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes OF API use of_delete_property where applicable instead
of freeing allocated data in different places.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds some sanity checks to of_new_property and of_delete_property.
Also, value pointer is always allocated even with zero length to allow
empty properties to be distinguished from non-existing properties.
Finally, data passed to of_new_property is only copied if non-NULL.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
config.h is automatically generated if not existing, so remove
the empty files and files which only have unused defines.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some boards use function names locally which we introduce as
global functions in the next patch. Rename them to avoid
'static declaration follows non-static declaration' errors.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
ENABLE_DEVICE_NOISE is used only in two network drivers and is
otherwise unused. ENABLE_FLASH_NOISE is completely unused.
ENABLE_PARTITION_NOISE enables DEBUG in the partition command,
but this code has no debug messages at all.
Remove all this.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
commit d7a913469c breaks boot source detection
for pcm049. The tracing vectors shows all tested boot sources, so order is
important. By not returning but overwriting src we effectively reversed the
order if more than one flag is set.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Don't set SET0 voltage, because it acts as boot voltage for OPP boot.
Take care that the kernel doesn't drive vset gpio to low. This may
happen while reseting the gpio module at initialization, look for
HWMOD_INIT_NO_RESET.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Reviewed-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch removes the call of the cpu_is_* functions completely
and uses id_tables instead.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
if E0 flag is not set, sdram is defenetly not configured.
Signed-off-by: Oleksij Rempel <linux@rempel-privat.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The mips_barebox_10h macro inserts at offset 0x10
of the barebox image the string 'barebox ' followed
by compile time version mark.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added device register functions and cpu_is_am33xx()
function.
Adapted the i2c-omap driver. AM335x has a lower
clock rate and the timeout of polling the isr function
had to be increased.
Based on a patch from Shravan Kumar <shravan.k@phytec.in>.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
cpu_is_omap2430() is set when CONFIG_ARCH_OMAP is enabled.
This fits for all OMAP/AM33xx boards supported in barebox.
Cleaned up all conditions that use the cpu_is_omap2430().
Also removed some unused defines.
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Antony Pavlov
Sascha Hauer
Christoph Fritz
Jan Weitzel
Sebastian Hesselbarth
Teresa Gámez
Juergen Beisert
Oleksij Rempel