The previous math would return negative sizes
for some BARs.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is the same fix that was applied to the Linux kernel in commit
56fab6e18944 (PCI: mvebu: Fix uninitialized variable in
mvebu_get_tgt_attr()).
Fixes: 5a9ba98 ("pci: mvebu: Add PCIe driver")
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This fixes the following warning:
drivers/mtd/nand/nand_orion.c: In function ‘orion_nand_probe’:
drivers/mtd/nand/nand_orion.c:145:1: warning: label ‘no_res’ defined but not used [-Wunused-label]
Fixes: 1a215f5 ("nand: Add Marvell Orion NAND driver")
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Recently, a fstat function was added to barebox. Redefine it as usual
to avoid problems for the sandbox. This fixes loading files into the
sandbox.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The warning is correct in that we pass in size_t instead
of int. As we are not interested in the size of the
property at this point, just remove the assignment.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Was accidently preplaced by the Karo-TX 51 string,
restore the previous state.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The compatible changed when we switched to the upstream
DTs, so the initcalls would not be executed on the START-R
board.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes mbr is erroneously recocognised as FAT partion. Due to this the mbr
partition parser is not being called and the partitions on the media are not
detected. This patch should fix the problem. The checking is done as in the
linux kernel.
I have seen the problem using usb sticks. Although partitioning and formatting
them under linux. The file system type field in the mbr remains there which
causes the wrong detections as FAT32 type and not as mbr.
Signed-off-by: Zahari Doychev <zahari.doychev@linux.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This command compares two files. It does not show the differences,
it only returns successfully if both files are identical and with
an error if they differ.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds xz decompression support from the kernel. Both compressing
the barebox binary with xz and decompressing xz files on the commandline
is supported.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we are registering a proper driver for the
UARTs we no longer need to enable the clocks unconditionally.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The config option doesn't make any sense anymore
when building a multiimage barebox. With a proper
DT built into the image we don't need the ODMdata
mechanism to find the debug UART anymore.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
They are missing in the upstream DT. Add them
locally for now.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's the same as our version, so no need to carry it
around any longer.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This is a combined pincontrol/PHY driver for
the SerDes lanes on Tegra K1.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Don't know where I got the 204MHZ previously, but
102MHz is the official supported maximum.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Almost everything is upstream now, so no need to
keep our private copy of the DT.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
New DTs call the initial pinctrl state "boot" in
order to avoid Linux reconfiguring the pinctrl
by default. The bootloader should explicitly set
this state.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We use them to configure the environment location
so it's a good idea to have them available by default.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some SoCs are able to detect if they got reset
in response to an overtemperature event.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This brings in the generix PHY framework from Linux.
I tried to strip it down as much as possible while
keeping it useful.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds functions to bring up the new style
Tegra114+ PLL_E.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>