They are missing in the upstream DT. Add them
locally for now.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's the same as our version, so no need to carry it
around any longer.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Almost everything is upstream now, so no need to
keep our private copy of the DT.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We use them to configure the environment location
so it's a good idea to have them available by default.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sometimes a power domain didn't properly power up,
reading back the command register seems to fix this
by flushing the write.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that we have working network support on the Beaver board
it makes sense to enable some network options.
Signed-off-by: Lucas Stach <dev@lynxeye.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In order to use some devices we first have to power
up their power domain. Add support to do this in a
generic way.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
i2c is needed to enable voltage rails that are later
needed by other drivers.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds a mvebu_defconfig which enables all mvebu based boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Before actually doing something the user should always confirm the
update. Move the question out of the if() block.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Additionally to the MLO update handlers also register the update
handlers for the regular barebox image.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To be able to not only update the MLO in NAND but also the
regular barebox image.
Since this is implemented with help of the corresponding xload
handler this also removes the 'xload' from the Kconfig options
and the filename.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
These are necessary for USB support. To make sure they are actually
enabled when a USB capable barebox is started call the clock enable
function during startup also for the full barebox, not only the MLO.
Signed-off-by: Rolf Evers-Fischer <rolf.evers.fischer@delphi.com>
The AM3xxx can boot images containing a Configuration Header
(generated with omap_signGP) or images with GP Header (simple
size/address information in front of raw image). Update the
SPI NOR barebox update handler to detect the GP Header images.
These have 0x65726162 ('bare') at the offset header[10]. Also
automatically swap the endianess for non swapped images so
that the regular non swapped images can also be flashed.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We assumed that there is a special image format for SPI. This is not
the case. The AM33xx can boot either images generated with omap_signGP
or raw images which only have the image size and load address in front
of the image. Whether these images are booted from SPI or another
boot medium doesn't matter. The only special thing about SPI is that
the image is in big endian format.
- renames mk-am3xxx-spi-image.c to mk-omap-image.c as the image format
is not only supported by AM3xxx but also by the OMAP SoCs
- removes the option to specify the SoC
- introduces -s to build a big endian image
- detects if an image already is an image generated with omap_signGP
So the behaviour is like this:
raw image -> mk-omap-image -> prepend size/address -> image for SD/MMC
raw image -> mk-omap-image -s -> prepend size/address, big endian swap -> image for SPI
CH image -> mk-omap-image -> nothing, input == output
CH image -> mk-omap-image -s -> big endian swap -> image for SPI
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add Atmel sama5d4ek board support, which include following features:
- NAND flash support
- SPI flash support
- MMC card support (MCI1)
- LCD display support (with QT1070)
- Ethernet support
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Now that the correct SoC specific memory fixup function is called
we can allow to select multiple SoCs in Kconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Lucas Stach
Lucas Stach
Sascha Hauer
Rolf Evers-Fischer
Eric Bénard
Bo Shen