The mvebu boards use the BOARD make variable for the kwbimage
generation. This only exists in the old way, so move the mvebu
board Makefile entries back to arch/arm/Makefile until they
are converted to multiboard.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With OF clock providers, we can now remove temporary clocks and clock
aliases. Also, non-DT device probing for timer and serial is removed.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds of_clk_providers for core clocks and clock gates found on
Marvell MVEBU SoCs (Armada 370, Armada XP, Dove, and Kirkwood).
It is based on Linux clock providers with clock flags removed, as they
are not used on Barebox.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Timer node was missing a clocks property to core_clk 0 (tclk). Add it
and while at it, also fix a whitespace issue.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch provides a global cleanup barebox Kconfig files. This includes
replacing spaces to tabs, formatting in accordance format.
No functional changes.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch placed the flattened devicetree to armlinux_bootparams.
armlinux_bootparams normally is at SDRAM_START + 0x100. The kernels
initial page tables are normally at SDRAM_START + 0x4000, so the
flattened devicetree gets overwritten once it exceeds 0x3f00 bytes
which is quite common.
Revert this patch for now once a better solution can be found
This reverts commit 0c4108f917.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Alexander Shiyan <shc_work@mail.ru>
The chip select 0 (boot flash) registers are updated by the board
specific code as it is not done by the cpu early initialisation
any more.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The early initialisation of chip select 0 (boot flash) is removed
from cpu initialisation. This removes the dependency on board
base address definition.
Consequently, cpu_init_f is not called in the start-up code but
added to the init call list as cpu_init_r. Also the file
arch/ppc/mach-mpc85xx/fsl_lbc.c is deleted.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The Kernel commandline is an important debugging aid when people
ask why their Kernel won't start, so print it unconditionally.
This is done in !dt mode anyway, so also do it with dt.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds support for the Phytec phyFLEX-i.MX6 board. The phyFLEX-i.MX6
is a system-on-module based on the Freescale i.MX6 SoC. This patch supports
the 1GiB and 2GiB variants on a PBA-B-01 baseboard.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The i.MX6 uses the same GPMI NAND controller as i.MX23/28 do. This adds
i.MX6 support to the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The convenience wrapper also contains the bch resources to
get rid of the hardcoded base in the driver in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
As the apbh dma engine is also found on i.MX6 move the header file
out of MXS specific directories.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
MXS specific devices have some common infrastructure in the kernel
known as STMP devices. We have the same in barebox, but with a
mxs_ prefix instead of a stmp_ prefix. As some STMP devices are
also found on i.MX6 move the common infrastructure out of MXS
specific files and use the stmp_ prefix.
This is done in preparation for i.MX6 NAND support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This updates the NAND stuff to Linux-3.11-rc1. It is synchronized
as best as we can get:
- locks removed
- The splitting in different files we had to better support different
features has been dropped. Instead this is now done mostly with the
use of __maybe_unused
Some barebox adjustments are forward ported, like:
- Allow partial page writes
- Optionally allow to erase bad blocks
- check for all_ff before writing a page
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With other changes coming into the tree the binary is getting too big.
Save some space by not registering devices for which no support is available.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of making a pure 32bit write to a read/modify/write
operation with sr32 use writel directly. This saves a few bytes
of binary space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Successfully boots to console via kwboot. No other functionality yet.
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This drops support for storing the environment in the eMMC,
but the standard bootsource is the SPI NOR flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch moves support for MC34708 PMIC into mc13xxx driver.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Sebastian Hesselbarth
Alexander Shiyan
Antony Pavlov
Renaud Barbier
Jason Cooper
Jean-Christophe PLAGNIOL-VILLARD