Commit graph

904 commits

Author SHA1 Message Date
Simon Glass
0bdce0751b dm: x86: Drop the weak cpu_irq_init() function
There are no callers now. Platforms which need to set up interrupts their
own way can implement an interrupt driver. Drop this function.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:18 +08:00
Simon Glass
0ac8b1f437 dm: x86: queensbay: Add an interrupt driver
Add a driver for interrupts on queensbay and move the code currently in
cpu_irq_init() into its probe() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:18 +08:00
Simon Glass
117bfc7fbe dm: x86: quark: Add an interrupt driver
Add a driver for interrupts on quark and move the code currently in
cpu_irq_init() into its probe() method.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:18 +08:00
Simon Glass
b565d66d2c x86: Use the IRQ device when setting up the mptable
Instead of searching for the device tree node, use the IRQ device which has
a record of it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:18 +08:00
Simon Glass
d3b884b294 dm: x86: Add a common PIRQ init function
Most x86 interrupt drivers will want to use the standard PIRQ routing and
table setup. Put this code in a common function so it can be used by those
drivers that want it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:18 +08:00
Simon Glass
12d6929e1f dm: x86: Set up interrupt routing from interrupt_init()
At present interrupt routing is set up from arch_misc_init(). We can do it
a little later instead, in interrupt_init().

This removes the manual pirq_init() call. Where the platform does not have
an interrupt router defined in its device tree, no error is generated. Some
platforms do not have this.

Drop pirq_init() since it is no-longer used.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:18 +08:00
Simon Glass
e76187a355 dm: x86: Create a driver for x86 interrupts
It seems likely that at some point we will want a generic interrupt uclass.
But this is a big undertaking as it involves unifying code across multiple
architectures.

As a first step, create a simple IRQ uclass and a driver for x86. This can
be generalised later as required.

Adjust pirq_init() to probe this driver, which has the effect of creating
routing tables and setting up the interrupt routing. This is a start
towards making interrupts fit better with driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:18 +08:00
Simon Glass
f2b85ab5e6 dm: x86: spi: Convert ICH SPI driver to driver model PCI API
At present this SPI driver works by searching the PCI buses for its
peripheral. It also uses the legacy PCI API.

In addition the driver has code to determine the type of Intel PCH that is
used (version 7 or version 9). Now that we have proper PCH drivers we can
use those to obtain the information we need.

While the device tree has a node for the SPI peripheral it is not in the
right place. It should be on the PCI bus as a sub-peripheral of the LPC
device.

Update the device tree files to show the SPI controller within the PCH, so
that PCI access works as expected.

This patch includes Bin's fix-up patch from here:

   https://patchwork.ozlabs.org/patch/569478/

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:17 +08:00
Simon Glass
ca831f4933 dm: Expand the uclass for Platform Controller Hubs (PCH)
A Platform Controller Hub is an Intel concept - it is like the peripherals
on an SoC and is often in a separate chip from the CPU. The chip is typically
found on the first PCI bus and integrates multiple devices.

We have a very simple uclass to support PCHs. Add a few operations, such as
setting up the devices on the PCH and finding the SPI controller base
address. Also move it into drivers/pch/ since we will be adding a few PCH
drivers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-24 12:07:17 +08:00
Bin Meng
6071cd62d5 x86: quark: Fix boot breakage
With driver model timer conversion, quark based board does not boot
any more as mdelay() is called during quark_pcie_early_init() which
is before driver model gets initialized. Fix this breakage.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2016-01-19 08:32:23 -05:00
Tom Rini
5b8031ccb4 Add more SPDX-License-Identifier tags
In a number of places we had wordings of the GPL (or LGPL in a few
cases) license text that were split in such a way that it wasn't caught
previously.  Convert all of these to the correct SPDX-License-Identifier
tag.

Signed-off-by: Tom Rini <trini@konsulko.com>
2016-01-19 08:31:21 -05:00
Tom Rini
4edde96111 Merge branch 'master' of git://git.denx.de/u-boot-x86 2016-01-14 21:51:32 -05:00
Albert ARIBAUD
ecc306639e Fix board init code to respect the C runtime environment
board_init_f_mem() alters the C runtime environment's
stack it is actually already using. This is not a valid
behaviour within a C runtime environment.

Split board_init_f_mem into C functions which do not alter
their own stack and always behave properly with respect to
their C runtime environment.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
Acked-by: Thomas Chou <thomas@wytron.com.tw>
2016-01-13 21:05:17 -05:00
Miao Yan
3c30fd6ae2 x86: qemu: remove cpu node in device tree
Remove 'cpu' node in device tree for QEMU targets, and let U-Boot detect
and fix up those information at runtime.

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13 12:20:16 +08:00
Miao Yan
de752c5e73 x86: qemu: fix cpu device in smp boot
Currently, when booting with more that one CPU enabled, U-Boot scans
'cpu' node in device tree and calculates CPU number. This does not scale
well as changing CPU number also requires modifying .dts and re-compiling
U-Boot.

This patch uses fw_cfg interface provided by QEMU to detect online CPU
number at runtime, and dynamically adds 'cpu' device to U-Boot's driver
model.

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13 12:20:16 +08:00
Miao Yan
b28cecdfb8 x86: use actual CPU number for allocating memory
Use actual CPU number, instead of maximum cpu configured, to allocate
stack memory in 'load_sipi_vector'

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13 12:20:15 +08:00
Miao Yan
24fb49073e x86: fix a typo in function name
Rename 'find_cpu_by_apid_id' to 'find_cpu_by_apic_id'. This should be a
typo.

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13 12:20:15 +08:00
Miao Yan
5a694056fe x86: qemu: add a cpu uclass driver for qemu target
Add a cpu uclass driver for qemu. Previously, the qemu target gets cpu
number from board dts files, which are manually created at compile time.
This does not scale when more cpus are assigned to guest as the dts files
must be modified as well.

This patch adds a cpu uclass driver for qemu targets to directly read
online cpu number from firmware.

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13 12:20:15 +08:00
Miao Yan
f60df20aa9 x86: qemu: add fw_cfg support
The QEMU fw_cfg interface allows the guest to retrieve various data
information from QEMU. For example, APCI/SMBios tables, number of online
cpus, kernel data and command line, etc.

This patch adds support for QEMU fw_cfg interface.

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-13 12:20:15 +08:00
Bin Meng
87968de31d x86: ivybridge: Add macros for LPC decode ranges
Add several macros for LPC decode registers on PCH.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:15 +08:00
Bin Meng
59fb7fbd49 x86: fsp: Always use hex numbers in the hob command output
In the 'fsp hob' command output, decimal numbers and hexadecimal
numbers are used mixedly. Now change to always use hex numbers
to keep consistency.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:15 +08:00
Bin Meng
fa331fad1e x86: ivybridge: Do not require HAVE_INTEL_ME
Do not set HAVE_INTEL_ME by default as for some cases Intel ME
firmware even does not reside on the same SPI flash as U-Boot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:15 +08:00
Bin Meng
33fb6c0100 x86: ivybridge: Add microcode blobs for all the steppings
This adds microcode blobs created from Intel FSP package for the
Chief River platform. They are for all the Ivy Bridge steppings:
306a2 (B0), 306a4 (C0), 306a5 (K0/M0), 306a8 (E0/L0), except the
306a9 which is already in the U-Boot tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:15 +08:00
Bin Meng
214feec1c5 x86: fsp: Set up init runtime buffer in update_fsp_configs()
fsp_init() runtime buffer parameter might be different across
different platforms. Move this to update_fsp_configs().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:14 +08:00
Bin Meng
4ce022d396 x86: fsp: Move struct fspinit_rtbuf definition to chipset header
All FSP spec v1.0 complaint FSP binary uses struct fspinit_rtbuf
as defined by the 1.0 spec, however there are FSPs that does not
follow 1.0 spec (possible due to that FSP predates the 1.0 spec),
and future FSP binary that is complaint to v1.1 spec defines an
optional paltform-specific runtime data in the struct fspinit_rtbuf.
Hence move the definition to chipset header.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:14 +08:00
Bin Meng
e293502280 x86: queensbay: Remove invalid comments in update_fsp_configs()
Those comments in update_fsp_configs() are not correct. Remove them.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:14 +08:00
Bin Meng
3340f2cc0b x86: fsp: Introduce CONFIG_FSP_USE_UPD Kconfig option
Not every FSP supports UPD, thus we introduce a Kconfig option
CONFIG_FSP_USE_UPD and use it to wrap these common UPD handling
codes in fsp_support.c.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:14 +08:00
Bin Meng
81f84aa6c9 x86: fsp: Rename update_fsp_upd() and change its signature
To support platform-specific configurations (might not always be
UPD on some platform), use a better name update_fsp_configs() and
accepct struct fsp_config_data as its parameter so that platform
codes can handle whatever configuration data for that FSP.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:14 +08:00
Bin Meng
cb379a34c4 x86: fsp: Rename shared_data to fsp_config_data
FSP has several config data like UPD, HDA verb table which can be
overridden or provided by bootloader. Currently in U-Boot only UPD
is handled via struct shared_data. To accommodate any platform, we
rename shared_data to fsp_config_data and move the definition from
common place fsp_support.h to platform-specific place fsp_configs.h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:14 +08:00
Bin Meng
57ac74ff04 x86: fsp: Add boot_mode as a member of struct shared_data
Save boot_mode in struct shared_data for future refactoring.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:14 +08:00
Bin Meng
f0285fbe4e x86: fsp: Avoid cast stack_top in struct shared_data
Declare stack_top as u32 in struct shared_data and struct common_buf
so that we can avoid casting in fsp_init().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:13 +08:00
Bin Meng
aa02446406 x86: fsp: Simplify fsp_continue()
There is no need to pass shared_data to fsp_continue() so we can
remove unnecessary codes that simplifies the function a lot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2016-01-13 12:20:13 +08:00
Simon Glass
4abe8e40a7 dm: Convert PCI MMC over to use DM PCI API
At present pci_mmc_init() does not correctly use the PCI function since the
list it passes is not terminated. The array size passed to pci_mmc_init() is
actually not used correctly. Fix this and adjust the pci_mmc_init() to scan
all available MMC devices.

Adjust this code to use the new driver model PCI API.

This should move over to the new MMC uclass at some point.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Simon Glass
8beb0bda9c dm: x86: pci: Adjust bios_run_on_x86() to use the DM PCI API
This function should take a struct udevice rather than pci_dev_t. Update it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Simon Glass
3f4e1e8efc dm: pci: video: Convert video and pci_rom to use DM PCI API
Adjust these files to use the driver-model PCI API instead of the legacy
functions.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Simon Glass
7d8e4042f1 dm: Convert bios_interrupts to use DM PCI API
Adjust this code to use driver model for devices where possible. Since
existing users have not been converted the old code must remain.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Simon Glass
9bf727fcc4 dm: x86: ivybridge: Convert graphics init to use DM PCI API
Use the driver-model PCI functions here where possible. For now we have to
search for the device with pci_bus_find_bdf() but at some point we can put
this in a proper driver and avoid this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2016-01-12 10:19:09 -07:00
Bin Meng
789fa275b3 x86: Remove HAVE_ACPI_RESUME
These are currently dead codes. Until we have complete ACPI support,
we don't know if it works or not. Remove to avoid confusion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:56 +08:00
Bin Meng
d475d59020 x86: Remove CPU_INTEL_SOCKET_RPGA989
This Kconfig option name indicates it has something to do with cpu
socket, however it is actually not the case. Remove it and move
options inside it to NORTHBRIDGE_INTEL_IVYBRIDGE.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:54 +08:00
Bin Meng
efe2d80cca x86: Clean up ivybridge/chrome Kconfig options
There are some options which are never used, and also some options
which are selected by others but have never been a Kconfg option.
Clean these up.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:52 +08:00
Bin Meng
9bf76c21e0 x86: ivybridge: Remove NORTHBRIDGE_INTEL_SANDYBRIDGE
NORTHBRIDGE_INTEL_SANDYBRIDGE is for sandybridge, not ivybridge.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:50 +08:00
Bin Meng
4932443d26 x86: Move i8254_init() to x86_cpu_init_f()
Right now i8254_init() is called from timer_init() in the tsc timer
driver. But actually i8254 and tsc are completely different things.
Since tsc timer has been converted to driver model, we should find
a new place that is appropriate for U-Boot to call i8254_init(),
which is now x86_cpu_init_f().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:44 +08:00
Bin Meng
c5c5c201fe x86: Fix PCI UART compatible string for crownbay and galileo
With recent ns16550 driver changes, we only changed the legacy UART
(at I/O port 0x3f8) compatible string, but forgot to change the PCI
UART compatible string. Now fix it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-09 17:44:41 +08:00
Simon Glass
3ba5f74a54 dm: pci: Disable PCI compatibility functions by default
We eventually need to drop the compatibility functions for driver model. As
a first step, create a configuration option to enable them and hide them
when the option is disabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-12-01 06:26:38 -07:00
Bin Meng
7030f27ef3 x86: tsc: Move tsc_timer.c to drivers/timer
To group all dm timer drivers together, move tsc timer to
drivers/timer directory.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 06:26:35 -07:00
Bin Meng
1d4c83c248 x86: tsc: Remove legacy timer codes
Now that we have converted all x86 boards to use driver model timer,
remove these legacy timer codes in the tsc driver.

Note this also removes the TSC_CALIBRATION_BYPASS Kconfig option,
as it is not needed with driver model.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 06:26:35 -07:00
Bin Meng
80af39842e x86: Convert to use driver model timer
Convert all x86 boards to use driver model tsc timer.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 06:26:35 -07:00
Bin Meng
4e51fc2351 x86: tsc: Add driver model timer support
This adds driver model timer support to x86 tsc timer driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 06:23:51 -07:00
Bin Meng
2f80fc5035 x86: tsc: Use notrace from <linux/compiler.h>
Replace __attribute__((no_instrument_function)) with notrace from
<linux/compiler.h>.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-12-01 06:23:51 -07:00
Bin Meng
0f3176ed68 x86: Remove MIN_PORT80_KCLOCKS_DELAY
This is not referenced anywhere. Remove it, as well as
tsc_base_kclocks and tsc_prev in the global data.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Fix 'Reomve' typo:
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-12-01 06:23:51 -07:00
Thomas Chou
81cd63a991 ns16550: unify serial_x86
Unify serial_x86, and use the generic binding.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-20 20:41:30 -05:00
Bin Meng
b6ff6ce60c x86: qemu: Convert to use driver model keyboard
Convert to use driver model keyboard on QEMU.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:13:42 -07:00
Bin Meng
60fe101873 x86: crownbay: Convert to use driver model keyboard
Convert to use driver model keyboard on Intel Crown Bay.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-19 20:13:42 -07:00
Simon Glass
6b44ae6b06 x86: Add an i8042 device for boards that have it
Some boards have an i8042 device. Enable the driver for all x86 boards, and
add a device tree node for those which may have this keyboard.

Also adjust the configuration so that i8042 is always separate from the VGA,
and rename the stdin driver accordingly. With this commit the keyboard will
not work, but it is fixed in the next commit.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-11-19 20:13:41 -07:00
Bin Meng
902ca5bdf3 x86: Remove legacy pci codes
Now that we have converted all x86 boards to use driver model pci,
remove these legacy pci codes.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:25 -08:00
Bin Meng
aedefb6f79 x86: qemu: Convert to use driver model pci
Move to driver model for pci on QEMU.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:23 -08:00
Bin Meng
487485956b x86: qemu: Move chipset-specific codes from pci.c to qemu.c
Move chipset-specific codes such as PAM init, PCIe ECAM and MP table
from pci.c to qemu.c, to prepare for DM PCI conversion.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:22 -08:00
Bin Meng
20cbafa6fa x86: qemu: Remove call to vgabios execution
The call to pci_run_vga_bios() is not needed as this is handled
in the vesa_fb driver.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:21 -08:00
Bin Meng
e5ffa4bb62 x86: queensbay: Really disable IGD
According to Atom E6xx datasheet, setting VGA Disable (bit17)
of Graphics Controller register (offset 0x50) prevents IGD
(D2:F0) from reporting itself as a VGA display controller
class in the PCI configuration space, and should also prevent
it from responding to VGA legacy memory range and I/O addresses.

However test result shows that with just VGA Disable bit set and
a PCIe graphics card connected to one of the PCIe controllers on
the E6xx, accessing the VGA legacy space still causes system hang.
After a number of attempts, it turns out besides VGA Disable bit,
the SDVO (D3:F0) device should be disabled to make it work.

To simplify, use the Function Disable register (offset 0xc4)
to disable both IGD (D2:F0) and SDVO (D3:F0) devices. Now these
two devices will be completely disabled (invisible in the PCI
configuration space) unless a system reset is performed.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:20 -08:00
Bin Meng
1eb39a5093 x86: Move CONFIG_8259_PIC and CONFIG_8254_TIMER to Kconfig
Add Kconfig options for 8259 and 8254.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:19 -08:00
Bin Meng
da3fe24759 x86: Rename pcat_ to i8254 and i8259 accordingly
Rename pcat_timer.c to i8254.c and pcat_interrupts.c to i8259.c,
to match their header file names (i8254.h and i8259.h).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:18 -08:00
Bin Meng
bffeed0158 x86: Initialize i8254 timer counter 1
Initialize counter 1, used to refresh request signal. This is
required for legacy purpose as some codes like vgabios utilizes
counter 1 to provide delay functionality.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:18 -08:00
Bin Meng
0a2ea02068 x86: Fix cosmetic issues in the i8254 and i8259 codes
This cleans up i8254 and i8259 codes to fix several cosmetic
issues, like coding convention and some comments improvement.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:17 -08:00
Bin Meng
360c3013c8 x86: Remove dead codes wrapped by PARANOID_IRQ_TRIGGERS
PARANOID_IRQ_TRIGGERS is not referenced anywhere in U-Boot.
Remove these dead codes wrapped by it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:16 -08:00
Bin Meng
6c5052716e x86: Rename CONFIG_SYS_NUM_IRQS to SYS_NUM_IRQS
CONFIG_SYS_NUM_IRQS is actually not something we can configure,
but an architecture defined number of ISA IRQs. Move it from
x86-common.h to asm/interrupt.h and rename it to SYS_NUM_IRQS.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-11-13 06:46:16 -08:00
Tom Rini
da58dec866 Various Makefiles: Add SPDX-License-Identifier tags
After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one.  This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-11-10 09:19:52 -05:00
Fabio Estevam
6c2f758cee x86: Use the generic bitops headers
Use the generic bitops and also add custom __ffs() implementation
as per the kernel.

Also align the ffs() implementation with the kernel.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Jagan Teki <jteki@openedev.com>
2015-11-05 10:52:01 -05:00
George McCollister
e0ae64880b x86: Add support for Advantech SOM-6896
Advantech SOM-6896 is a Broadwell U based COM Express Compact Module
Type 6. This patch adds support for it as a coreboot payload.

On board SATA and SPI are functional. On board Ethernet isn't functional
but since it's optional and ties up a PCIe x4 that is otherwise brought
out, this isn't a concern at the moment. USB doesn't work since the
xHCI driver appears to be broken.

Signed-off-by: George McCollister <george.mccollister@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2015-10-21 16:29:27 -06:00
Bin Meng
3e45de6ed4 x86: ivybridge: Enable the MRC cache
This works correctly now, so enable it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Dropped malloc() and adjusted commit message:
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:51 -06:00
Simon Glass
fd8f4729ac x86: ivybridge: Measure the MRC code execution time
This code takes about 450ms without the MRC cache and about 27ms with the
cache. Add a debug timer so that this time can be displayed.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:51 -06:00
Simon Glass
e9b3967c0c x86: ivybridge: Fix car_uninit() to correctly set run state
At present a missing $ causes this code to hang when using the MRC cache/
Fix it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:51 -06:00
Simon Glass
9fbc5ccd79 x86: ivybridge: Check the RTC return value
The RTC can fail, so check the return value for reads.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:50 -06:00
Simon Glass
53327d3e61 x86: ivybridge: Use 'ret' instead of 'rcode'
For consistency, use 'ret' to handle a return value.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:50 -06:00
Simon Glass
7b95252d82 x86: chromebook_link: Enable the debug UART
Add support for the debug UART on link. This is useful for early debugging.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:50 -06:00
Simon Glass
60994a02a5 x86: Init the debug UART if enabled
If the debug UART is enabled, get it ready for use at the earliest possible
opportunity. This is not actually very early, but until we have a stack it
is difficult to make it work.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-10-21 07:46:50 -06:00
Bin Meng
ef1683d5c3 x86: Pass correct cpu_index to ap_init()
In sipi_vector.S, cpu_index (passed as %eax) is wrongly overwritten
by the ap_init() function address. Correct it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
06f16c4148 x86: galileo: Enable mrc cache
Now that we have added MRC cache on quark support codes,
enable it on Intel Galileo board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
2fc2b83a7d x86: quark: Implement mrc cache
Using existing mrccache library to implement mrc cache support
for Intel Quark.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
c6c80d8b3e x86: ivybridge: Correct two typos for MRC
It should be MRC, not MCR.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
ec73da82a6 x86: Remove unused rw-mrc-cache properties in the link and panther dts files
"type" and "wipe-value" are never used by the mrccache codes.
Remove them to avoid confusion. This also removes the alignment
comment in the panther dts file.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
74e56d1953 x86: baytrail: Issue full system reset in reset_cpu()
With MRC cache enabled, when typing 'reset' in the U-Boot shell,
BayTrail FSP initialization hangs at "Configuring Memory Start":

  Setting BootMode to 0
  Install PPI: 1F4C6F90-B06B-48D8-A201-BAE5F1CD7D56
  Register PPI Notify: F894643D-C449-42D1-8EA8-85BDD8C65BDE
  About to call MrcInit();
  BayleyBay Platform Type
  CurrentMrcData.BootMode = 4
  Taking Fastboot path!
  Configuring Memory Start...

Changing reset_cpu() to do a full system reset fixes this issue.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
638a058941 x86: Enable mrc cache for bayleybay and minnowmax
Now that we have added MRC cache for Intel FSP and BayTrail codes,
enable it for all BayTrail boards (Bayley Bay and Minnow Max).

Note it turns out that FSP for Intel Atom E6xx does not produce
the HOB for NV storage, so we don't have such functionality on
Intel Crown Bay board.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
8b185041a9 x86: baytrail: Save mrc cache to spi flash
Save MRC cache to SPI flash in arch_misc_init().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
ff1e18af9d x86: fsp: Pass mrc cache to fsp_init() and save it to gd after fsp_init()
fsp_init() call has a parameter nvs_buf which is used by FSP as the
MRC cache but currently is blindly set to NULL. Retreive the MRC
cache from SPI flash and pass it to fsp_init() call. After the call,
save FSP produced MRC cache to SPI flash too.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
4b9f6a669e x86: Use struct mrc_region to describe a mrc region
Currently struct fmap_entry is used to describe a mrc region.
However this structure contains some other fields that are not
related to mrc cache and causes confusion. Besides, it does not
include a base address field to store SPI flash's base address.
Instead in the mrccache.c it tries to use CONFIG_ROM_SIZE to
calculate the SPI flash base address, which unfortunately is
not 100% correct as CONFIG_ROM_SIZE may not match the whole
SPI flash size.

Define a new struct mrc_region and use it instead.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
42913a1c7a x86: ivybridge: Use APIs provided in the mrccache lib
Remove the call to custom mrc cache APIs, and use the ones
provided in the mrccache lib.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
ed800961a0 x86: Add more common routines to manipulate mrc cache
This adds mrccache_reserve(), mrccache_get_region() and
mrccache_save() APIs to the mrccache codes. They are ported
from the ivybridge implementation, but with some changes.
For example, in the mrccache_reserve(), ivybridge version
only reserves the pure MRC data, which causes additional
malloc() when saving the cache as the save API needs some
meta data. Now we change it to save the whole MRC date plus
the meta data to elinimate the need for the malloc() later.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
bfa95c538b x86: Add various minor tidy-ups in mrccache codes
Fix some nits, improve some comments and reorder some codes
a little bit.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:27 -06:00
Bin Meng
2fe66dbcbc x86: Do sanity test on the cache record in mrccache_update()
For the cache record to write in mrccache_update(), we should
perform a sanity test to see if it is a valid one.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Bin Meng
f6220f1a86 x86: Move mrccache.[c|h] to a common place
mrccache implementation can be common for all boards. Move it
from ivybridge cpu directory to the common lib directory.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Bin Meng
e2d76e95d3 x86: Add ENABLE_MRC_CACHE Kconfig option
Create a Kconfig option for enabling MRC cache.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Bin Meng
010921ae7f x86: fsp: Add a hdr sub-command to show header information
It would be helpful to have a command to show FSP header. So far
it only supports FSP header which conforms to FSP spec 1.0.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Bin Meng
62716ebb75 x86: fsp: Make hob command a sub-command to fsp
Introduce a new fsp command and make the existing hob command a
sub-command to fsp for future extension. Also move cmd_hob.c to
the dedicated fsp sub-directory in arch/x86/lib.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Bin Meng
b325cbb171 x86: fsp: Print GUID whenever applicable in the hob command output
When examining a HOB, it's useful to see which GUID this HOB
belongs to. Add GUID output in the hob command to aid this.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Bin Meng
fd755f084e x86: fsp: Compact the output of hob command
Compact hob command output, especially by making hob type string a
little bit shorter so that we can leave room for future extension.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Bin Meng
721e992a8a x86: Add SMBIOS table support
System Management BIOS (SMBIOS) is a specification for how
motherboard and system vendors present management information
about their products in a standard format by extending the BIOS
interface on Intel architecture systems. As of today the latest
spec is 3.0 and can be downloaded from DMTF website. This commit
adds a simple and minimum required implementation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:26 -06:00
Bin Meng
59ec719df6 x86: Move install_e820_map() out of zimage.c
install_e820_map() has nothing to do with zimage related codes.
Move it to a dedicated place.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:25 -06:00
Bin Meng
19038e1bb6 x86: Initialize GDT entry 1 to be the 32-bit CS as well
Some OS (like VxWorks) requires GDT entry 1 to be the 32-bit CS.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
2015-10-21 07:46:25 -06:00
Bin Meng
1f124eba11 x86: Allow disabling IGD on Intel Queensbay
Add a Kconfig option to disable the Integrated Graphics Device (IGD)
so that it does not show in the PCI configuration space as a VGA
disaplay controller. This gives a chance for U-Boot to run PCI/PCIe
based graphics card's VGA BIOS and use that for the graphics console.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:25 -06:00
Bin Meng
5bf935925b x86: ivybridge: Remove the dead codes that programs pci bridge
Remove bd82x6x_pci_bus_enable_resources() that is not called anywhere.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-10-21 07:46:25 -06:00
Bin Meng
196193a4d4 x86: fsp: Report correct number of E820 table entries
The logic to calculate the number of E820 table entries is wrong
when walking through the FSP HOB tables. Fix it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-28 21:56:27 -07:00
Bin Meng
c6d4705f41 x86: quark: Configure MTRR to enable cache
Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs
are accessed indirectly via the message port and not the traditional
MSR mechanism. Only UC, WT and WB cache types are supported.

We configure all the fixed range MTRRs with common values (VGA RAM
as UC, others as WB) and 3 variable range MTRRs for ROM/eSRAM/RAM as
WB, which significantly improves the boot time performance.

With this commit, it takes only 2 seconds for U-Boot to boot to shell
on Intel Galileo board. Previously it took about 6 seconds.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:53 -06:00
Bin Meng
5bf0f7f65d x86: galileo: Add PCIe root port IRQ routing
Now we have enabled PCIe root port on Quark SoC, add its PIRQ
routing information in the device tree as well.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:53 -06:00
Bin Meng
554778c240 x86: quark: Initialize thermal sensor properly
Thermal sensor on Quark SoC needs to be properly initialized per
Quark firmware writer guide, otherwise when booting Linux kernel,
it triggers system shutdown because of wrong temperature in the
thermal sensor is detected by the kernel driver (see below):

[    5.119819] thermal_sys: Critical temperature reached(206 C),shutting down
[    5.128997] Failed to start orderly shutdown: forcing the issue
[    5.135495] Emergency Sync complete

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:53 -06:00
Bin Meng
693b5f6c71 x86: quark: Lock HMBOUND register before jumping to kernel
When Linux kernel boots, it hangs at:

[    0.829408] Intel Quark side-band driver registered

This happens when Quark kernel Isolated Memory Region (IMR) driver
tries to lock an IMR register to protect kernel's text and rodata
sections. However in order to have IMR function correctly, HMBOUND
register must be locked otherwise the system just hangs.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:53 -06:00
Bin Meng
8e3683029e x86: quark: Convert to use clrbits, setbits, clrsetbits macros
Change existing codes to use clrbits, setbits, clrsetbits macros.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:52 -06:00
Bin Meng
d0b3e3bfbb x86: quark: Add clrbits, setbits, clrsetbits macros for message port access
On Intel Quark, lots of registers on the message port need be
programmed. Add handy clrbits, setbits, clrsetbits macros for
message port access.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:52 -06:00
Bin Meng
2afb62305e x86: quark: Add PCIe/USB static register programming after memory init
This adds static register programming for PCIe and USB after memory
init as required by Quark firmware writer guide. Although not doing
this did not cause any malfunction, just do it for safety.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:52 -06:00
Bin Meng
5841c5b0a7 x86: Convert to use driver model eth on quark/galileo
Convert to use DM version of Designware ethernet driver on Intel
quark/galileo.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-16 19:53:52 -06:00
Bin Meng
b06862b9d8 x86: quark: Add USB PHY initialization support
USB PHY needs to be properly initialized per Quark firmware writer
guide, otherwise the EHCI controller on Quark SoC won't work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Bin Meng
31b5aebd5e x86: Convert to use driver model pci on quark/galileo
Move to driver model pci for Intel quark/galileo.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Bin Meng
316fd3920f x86: Enable PCIe controller on quark/galileo
Quark SoC holds the PCIe controller in reset following a power on.
U-Boot needs to release the PCIe controller from reset. The PCIe
controller (D23:F0/F1) will not be visible in PCI configuration
space and any access to its PCI configuration registers will cause
system hang while it is held in reset.

Enable PCIe controller per Quark firmware writer guide.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Bin Meng
aa09505ba1 x86: quark: Avoid chicken and egg problem
If we convert to use driver model pci on quark, we will encounter
some chicken and egg problems like below:

- To enable PCIe root ports, we need program some registers on the
  message bus via pci bus. With driver model, the first time to
  access pci bus, the pci enumeration process will be triggered.
  But without first enabling PCIe root ports, pci enumeration
  just hangs when scanning PCIe root ports.
- Similar situation happens when trying to access GPIO from the
  PCIe enabling codes, as GPIO requires its block base address
  to be assigned via a pci configuration register in the bridge.

To avoid such dilemma, replace all pci calls in the quark codes
to use the local version which does not go through driver model.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Bin Meng
5750e5e29a x86: quark: Optimize MRC execution time
Intel Quark SoC has a low end x86 processor with only 400MHz
frequency. Currently it takes about 15 seconds for U-Boot to
boot to shell and the most time consuming part is with MRC,
which is about 12 seconds. MRC programs lots of registers on
the SoC internal message bus indirectly accessed via pci bus.

To speed up the boot, create an optimized version of pci config
read/write dword routines which directly operate on PCI I/O ports.
These two routines are inlined to provide better performance too.
Now it only takes about 3 seconds to finish MRC, which is really
fast (4 times faster than before).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Bin Meng
5bc60d5a44 x86: coreboot: Convert to use more dm drivers
Move to driver model for RTC, USB and ETH on coreboot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-09-09 07:48:03 -06:00
Simon Glass
548fb8777d x86: panther: Add PCI and video configuration
Add a PCI node to the device tree. This allows SPI flash and SATA to work
correctly. Also configure the video to come up correctly even though there
is no keyboard.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-09-09 07:48:03 -06:00
Simon Glass
6e474eab44 exynos: x86: dts: Add tpm nodes to the device tree for Chrome OS devices
Add a TPM node to the various Chromebooks so that driver can be converted to
driver model.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Christophe Ricard<christophe-h.ricard@st.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
2015-08-31 07:57:28 -06:00
Bin Meng
a1f1582b73 x86: crownbay: Support Topcliff integrated pci uart devices with driver model
In order to make a pci uart device node to be properly bound to its
driver, we need make sure its parent node has a compatible string
which matches a driver that scans all of its child device nodes in
the device tree.

Change all pci bridge nodes under root pci node to use "pci-bridge"
compatible driver, as well as corresponding <reg> properties to
indicate its devfn. At last, adding "u-boot,dm-pre-reloc" to each
of these nodes for driver model to initialize them before relocation.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:17 -07:00
Bin Meng
4dd02a752c x86: crownbay: Enable on-board SMSC superio keyboard controller
So far we only enabled one legacy serial port on the SMSC LPC47m
superio chipset on Intel Crown Bay board. As the board also has
dual PS/2 ports routed out, enable the keyboard controller which
is i8042 compatible so that we can use PS/2 keyboard and mouse.

In order to make PS/2 keyboard work with the VGA console, remove
CONFIG_VGA_AS_SINGLE_DEVICE. To boot Linux kernel with PIC mode
using PIRQ routing table, adjust the mask in the device tree to
reserve irq12 which is used by PS/2 mouse.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:16 -07:00
Simon Glass
86645c8932 x86: minnowmax: Correct pad-offset value for host_en1
This should be 0x250, not 0x258. Fix it.

Reported-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:14 -07:00
Simon Glass
cce7e0fa2b x86: minnowmax: Add access to GPIOs E0, E1, E2
These GPIOs are accessible on the pin header. Add pinctrl settings for them
so that we they can be adjusted using the 'gpio' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:14 -07:00
Saket Sinha
bccdf1de75 x86: Add DSDT table for supporting ACPI on QEMU
The DSDT table contains a bytecode that is executed by a driver in the kernel.

Signed-off-by: Saket Sinha <saket.sinha89@gmail.com>
Tested with QEMU '-M q35'
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:14 -07:00
Saket Sinha
e94019ede7 x86: Add ACPI table support to QEMU
This patch mainly adds ACPI support to QEMU.
Verified by booting Linux kernel on QEMU Q35.

Signed-off-by: Saket Sinha <saket.sinha89@gmail.com>
Minor whitespace fixes and dropped mention of i440FX in commit message:
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:14 -07:00
Saket Sinha
867bcb63e7 x86: Generate a valid ACPI table
Implement write_acpi_table() to create a minimal working ACPI table.
This includes writing FACS, XSDT, RSDP, FADT, MCFG, MADT, DSDT & SSDT
ACPI table entries.

Use a Kconfig option GENERATE_ACPI_TABLE to tell U-Boot whether we need
actually write the APCI table just like we did for PIRQ routing, MP table
and SFI tables. With ACPI table existence, linux kernel gets control of
power management, thermal management, configuration management and
monitoring in hardware.

Signed-off-by: Saket Sinha <saket.sinha89@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tidied up whitespace and aligned some tabs:
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:13 -07:00
Bin Meng
c78dfb4fd2 x86: superio: Add keyboard controller support to smsc_lpc47m driver
Add an api to enable and configure the integrated keyboard controller
on SMSC LPC47m superio chipset. It also adds several macros to help
future extension.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:12 -07:00
Bin Meng
fa6af7b4e0 x86: baytrail: Remove the fsp_init_phase_pci() call
It turns out that calling fsp_init_phase_pci() in arch_misc_init()
is subject to break pci device drivers as with driver model, when
the bus enumeration happens is not deterministic.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:12 -07:00
Bin Meng
090290f97b x86: queensbay: Move unprotect_spi_flash() to arch_misc_init()
With dm pci conversion, pci config read/write in unprotect_spi_flash()
silently fails as at that time dm pci is not ready and bus enumeration
is not done yet. Actually we don't need to do this in that early phase,
hence we delay this call to arch_misc_init().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:12 -07:00
Bin Meng
48aa6c2614 x86: fsp: Add comments about U-Boot entering start.S twice
Add some comments in start.S for the fact that with FSP U-Boot
actually enters the code twice. Also change to use fsp_init()
and fsp_continue for accuracy.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:11 -07:00
Bin Meng
57b10f59b7 x86: fsp: Enlarge the size of malloc() pool before relocation
After fsp_init() returns, the stack has already been switched to a
place within system memory as defined by CONFIG_FSP_TEMP_RAM_ADDR.
Enlarge the size of malloc() pool before relocation since we have
plenty of memory now.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:11 -07:00
Bin Meng
5fb0151697 x86: baytrail: Support multiple microcode copies
Intel FSP has the capability to walk through the microcode blocks
which are passed as the TempRamInit() parameter from U-Boot and
finds the most appropriate microcode which is suitable for the cpu
on which it is running. Now we've seen several steppings for Intel
BayTrail series processors, adding those microcodes to the Intel
BayleyBay and MinnowMax board device tree files.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:09 -07:00
Bin Meng
5c113ff79c x86: baytrail: Add microcode for BayTrail-I D0 stepping
This commit adds the microcode blob for BayTrail-I D0 stepping,
CPUID signature 30679h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-26 07:54:09 -07:00
Bin Meng
8744bef5a1 x86: kconfig: Hide "System tables" for coreboot
When booting as a coreboot payload, we don't need write any
configuration tables as coreboot does that for us.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:08 -07:00
Bin Meng
d2f56f46fe x86: kconfig: Hide "System tables" for EFI
Instead of hiding each menu entries under "System tables" for EFI,
hide the main menu completely.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:07 -07:00
Bin Meng
a25bc78e2f x86: coreboot: Allow >=4GiB memory bank size
Some platforms may have >=4GiB memory, so we need make U-Boot report
such configuration correctly when booting as the coreboot payload.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:07 -07:00
Bin Meng
c17ca6b5cd x86: Remove calculate_relocation_address()
Now that we have generic routine to calculate relocation address,
remove the x86 specific one which is now only used by coreboot.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:07 -07:00
Bin Meng
52b778603b x86: coreboot: Correctly report E820 types
coreboot has some extensions (type 6 & 16) to the E820 types.
When we detect this, mark it as E820_RESERVED.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:07 -07:00
Bin Meng
89b870814c x86: coreboot: Increase memrange entry number to 32
Increase lib_sysinfo memrange entry number to 32 to sync with coreboot.
This allows a complete E820 table to be reported to the kernel, as on
some platforms (eg: Bayley Bay) having only 16 entires does not cover
all the memory ranges.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-26 07:54:06 -07:00
Simon Glass
ef910819c5 x86: minnowmax: Define and enable interrupt setup
Set up interrupts correctly so that Linux can use all devices. Use
savedefconfig to regenerate the defconfig file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 09:50:14 -06:00
Simon Glass
052e34b363 x86: Return -1 when reading a PCI config register fails
This can fail for internal reasons, so return a sensible value rather than
a random one.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 09:50:13 -06:00
Simon Glass
ecf674b772 x86: Drop FSP error defines and use EFI instead
Now that we have an efi.h header we can use that for FSP error defines.
Drop the FSP ones.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 09:50:13 -06:00
Bin Meng
ecfeadabb7 x86: Set APs' req_seq to the reg number from device tree
Multiple APs are brought up simultaneously and they may get the same
seq num in the uclass_resolve_seq() during device_probe(). To avoid
this, set req_seq to the reg number in the device tree in advance.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-14 09:50:12 -06:00
Simon Glass
7399515d25 x86: Show the un-relocated IP address in exceptions
When trying to figure out where an exception has occured, the relocated
address is not a lot of help. Its value depends on various factors. Show
the un-relocated IP as well. This can be looked up in System.map directly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 09:50:12 -06:00
Simon Glass
f0c7d9c746 x86: Switch to using generic global_data setup
There is quite a bit of assembler code that can be removed if we use the
generic global_data setup. Less arch-specific code makes it easier to add
new features and maintain the start-up code.

Drop the unneeded code and adjust the hooks in board_f.c to cope.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 09:50:10 -06:00
Simon Glass
2db9374561 x86: Move the GDT into global_data
Rather than keeping track of the Global Descriptor Table in its own memory
we may as well put it in global_data with everything else. As a first step,
stop using the separately allocated GDT.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 09:50:10 -06:00
Simon Glass
93afae5d05 x86: Remove init_gd() function
This is declared but no-longer exists. Drop it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 03:24:21 -06:00
Simon Glass
c8896ee481 x86: baytrail: Support running as an EFI payload
We should not fiddle with interrupts or the FSP when running as an EFI
payload. Detect this and skip this code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 03:24:21 -06:00
Simon Glass
46f8efee70 x86: baytrail: Tidy up interrupt and FSP init
We should signal to the FSP that PCI enumeration is complete. Perform this
task in a suitable place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 03:24:21 -06:00
Simon Glass
7e4be120e8 x86: Allow pirq_init() to return an error
This function can fail. In this case we should return the error rather than
swallowing it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 03:24:21 -06:00
Simon Glass
412400abaa x86: Split out fsp_init_phase_pci() code into a new function
This code may be useful for boards that use driver model for PCI.

Note: It would be better to have driver model automatically call this
function somehow. However for now it is probably safer to have it under
board control.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 03:24:21 -06:00
Simon Glass
9e3ff9c2b4 x86: Tidy up the PIRQ routing code a little
This code could use a little tightening up. There is some repetition and
an odd use of fdtdec_get_int_array().

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-14 03:24:21 -06:00
Bin Meng
da60fb7934 x86: fsp: Do not assert VPD_IMAGE_REV when DEBUG
When using different release version of Intel FSP, the VPD_IMAGE_REV
is different (ie: BayTrail Gold 3 is 0x0303 while Gold 4 is 0x0304).
Remove the asserting of this so that U-Boot does not hang in a debug
build.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-14 03:24:21 -06:00
Andrew Bradford
f3b84a3032 x86: baytrail: Configure FSP UPD from device tree
Allow for configuration of FSP UPD from the device tree which will
override any settings which the FSP was built with itself.

Modify the MinnowMax and BayleyBay boards to transfer sensible UPD
settings from the Intel FSPv4 Gold release to the respective dts files,
with the condition that the memory-down parameters for MinnowMax are
also used.

Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
Removed fsp,mrc-debug-msg and fsp,enable-xhci for minnowmax, bayleybay
Fixed lines >80col
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-08-14 03:24:21 -06:00
Simon Glass
bbbe55f6f2 x86: Enable debug UART for Minnowmax
Enable the debug UART and emit a single 'a' early in the init sequence to
show that it is working.

Unfortunately the debug UART implementation needs a stack to work. I cannot
seem to remove this limitation as the absolute 'jmp %eax' instruction goes
off into the weeds.

So this means that the character output cannot be any earlier than
car_init_ret, where memory is available for a stack.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <l.majewski@samsung.com>
2015-08-06 07:44:30 -06:00
Simon Glass
eeae510007 x86: qemu: Support operation as an EFI payload
Disable a few things which interfere with the EFI init. This allows QEMU to
to boot into EFI, load a U-Boot payload then boot to the U-Boot prompt.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:08 -06:00
Simon Glass
b4302582f3 x86: baytrail: Support operation as an EFI payload
Disable a few things which interfere with the EFI init. This allows the
Minnowboard MAX to boot into EFI, load a U-Boot payload then boot to the
U-Boot prompt.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:08 -06:00
Simon Glass
8e36650875 x86: Add helper code for running from EFI
When U-Boot is running from EFI some of the x86 init is replaced with
EFI-specific init. For example, since DRAM has already been set up, we only
need to find it, not init it. Add these functions so that boards can easily
allow booting from EFI if required.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:08 -06:00
Simon Glass
e49cceac61 x86: Handle running as EFI payload
When U-Boot runs as an EFI payload it needs to avoid setting up the CPU
again. Also U-Boot currently does not handle interrupts for many devices, so
run with interrupts disabled.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:08 -06:00
Simon Glass
42fde30500 x86: Add support for passing tables into U-Boot
The EFI stub provides information to U-Boot in a table. This includes the
memory map which is needed to decide where to relocate U-Boot. Collect this
information in the early init code and store it in global_data.

Fix up the BIST code at the same time since we don't have it when booting
from EFI and can assume it is 0.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Simon Glass
96a8d409a7 efi: Add 64-bit payload support
Most EFI implementations use 64-bit. Add a way to build U-Boot as a 64-bit
EFI payload. The payload unpacks a (32-bit) U-Boot and starts it. This can
be enabled for x86 boards at present.

Signed-off-by: Simon Glass <sjg@chromium.org>
Improvements to how the payload is built:
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Simon Glass
6f92ed8f1a x86: Add a way to call 32-bit code from 64-bit mode
The procedure to drop from 64-bit mode to 32-bit is a bit messy. Add a
function to take care of it. It requires identity-mapped pages and that
the calling code is running below 4GB.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Simon Glass
7dfe8bdeef x86: Add an enum for some commonly-used GDT bits
Rather than add these as open-coded values, create an enum with the commonly
used flags.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Simon Glass
b997abd3f0 x86: Support building the EFI stub
Add support for building a 32/64-bit EFI stub for x86. This involves
building the startup and relocation code for either i386 or x86_64.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:07 -06:00
Simon Glass
476476e73b efi: Add support for loading U-Boot through an EFI stub
It is useful to be able to load U-Boot onto a board even if is it already
running EFI. This can allow access to the U-Boot command interface, flexible
booting options and easier development.

The easiest way to do this is to build U-Boot as a binary blob and have an
EFI stub copy it into RAM. Add support for this feature, targeting 32-bit
initially.

Also add a way to detect when U-Boot has been loaded via a stub. This goes
in common.h since it needs to be widely available so that we avoid redoing
initialisation that should be skipped.

Signed-off-by: Simon Glass <sjg@chromium.org>
Improvements to how the payload is built:
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:06 -06:00
Simon Glass
465a67cf52 x86: Add relocation and link script for a 64-bit EFI application
Add a linker script and relocation code for building 64-bit EFI
applications. This can be used for the EFI stub.

Signed-off-by: Simon Glass <sjg@chromium.org>
Improvements to how the payload is built:
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:06 -06:00
Simon Glass
a42bfe02d3 x86: Allow relocation code to build without text base
This code currently requires CONFIG_SYS_TEXT_BASE but this should be
unnecessary. As a first step, remove the build-time limitation and report an
error instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:06 -06:00
Simon Glass
d6c099c2a1 x86: dts: Add a device tree file for EFI
This contains just enough to bring up the serial UART.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:06 -06:00
Ben Stoltz
3e9aa32055 x86: Add EFI board code
Add support for the efi-x86 board, which supports running U-Boot as an
EFI 32-bit application.

Signed-off-by: Ben Stoltz <stoltz@google.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:06 -06:00
Ben Stoltz
3dcdd17b43 x86: Add support for U-Boot as an EFI application
Add the required x86 glue code. This includes the initial start-up,
relocation and jumping to efi_main(). We also need to avoid fiddling with
interrupts.

Signed-off-by: Ben Stoltz <stoltz@google.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:06 -06:00
Simon Glass
ed3b4d3736 x86: Add asm/elf.h for x86-specific ELF definitions
Bring in this file from Linux 4.1. It supports relocation features specific
to x86.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:05 -06:00
Simon Glass
981dca69f6 x86: Support skipping relocation for EFI
When running as an EFI application we must skip relocation. Add support for
this in the x86 relocation code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:05 -06:00
Ben Stoltz
3f1c046cea x86: Set up toolchain flags for running as EFI application
Adjust the toolchain flags to build U-Boot as a relocatable shared library,
as required by EFI.

Signed-off-by: Ben Stoltz <stoltz@google.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:44:05 -06:00
Simon Glass
867a6ac86d efi: Add start-up library code
When running as an EFI application, U-Boot must request memory from EFI,
and provide access to the boot services U-Boot needs.

Add library code to perform these tasks. This includes efi_main() which is
the entry point from EFI. U-Boot is built as a shared library.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Simon Glass
8f3b9694b2 x86: Allow use of global_data with EFI
On x86 the global_data pointer is provided through a somewhat-bizarre and
x86-specific mechanism: the F segment register is set to a pointer to the
start of global_data, so that accesses can use this build-in register.

When running as an EFI application we don't want to mess with the Global
Descriptor Table (GDT) and there is little advantage (in terms of code size)
to doing so.

Allow global_data to be a simple variable in this case.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Simon Glass
8aba36d896 x86: Tidy up a few minor issues with interrupts
Fix a typo, remove an unused field and make sure to use existing #define
constants instead of open-coded values.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Simon Glass
8b097916fa x86: Add some missing global_data declarations in files that use gd
Some files use global_data but don't declare it. Fix this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Simon Glass
0bc74ab3e6 x86: Tidy up the 64-bit calling code
The GDT works but technically the length is incorrect. Fix this and add a
comment.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:41 -06:00
Simon Glass
0d9edd2dfb x86: Drop unused copy_fdt_to_ram()
This is now handled by generic U-Boot code so we do not need an x86 version.
It is no-longer called, so remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:40 -06:00
Simon Glass
83ec7de3bc x86: Tidy up global_data flags
These flags now overlap some global ones. Adjust the x86-specific flags to
avoid this. Since this requires a change to the start.S code, add a way for
tools to find the 32-bit cold reset entry point. Previously this was at a
fixed offset.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:40 -06:00
Simon Glass
b6c9a20556 x86: Use CR0 constants in CPU init
We should use these constants where possible.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:40 -06:00
Simon Glass
da3a95d60b x86: Add various minor tidy-ups to the 32-bit startup code
Fix a typo, improve some comments and add a little more detail in some
cases.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-08-05 08:42:40 -06:00
Bin Meng
fe3fbd3024 x86: bayleybay: Configure PCI IRQ
Add PCI IRQ routing information in the board device tree and enable
writing PIRQ routing table and MP table.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:39 -06:00
Bin Meng
9b911bed78 x86: Add Intel Bayley Bay board support
Intel Bayley Bay board is a BayTrail based board. Add this board
with existing baytrail fsp support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:39 -06:00
Bin Meng
2774ff720d x86: Add microcode for BayTrail-I B0 stepping
This commit adds the microcode blob for BayTrail-I B0 stepping,
CPUID signature 30671h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:39 -06:00
Bin Meng
3e79a4ab26 x86: baytrail: Update UPD setting for FSP Gold4 release
BayTrail FSP Gold4 release adds one UPD parameter to control IGD
enable/disable.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:39 -06:00
Bin Meng
a2eb65fcad x86: qemu: Add MP initialization
Add a cpu1 node to the device tree and enable the MP initialization
on QEMU targets (i440fx and q35).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:38 -06:00
Miao Yan
417576c2f1 x86: Add a 'pause' instruction in __udelay() for QEMU target
When running SMP configuration on QEMU (tcg mode, no kvm), there is
a busy loop in start_aps(), calling udelay(), that waits for APs to
show up online. However, there is a chance that VCPU1 will be timeout
waiting, IOW the secondary VCPUs haven't started their execution yet.

This patch adds a 'pause' instruction in __udelay() only for QEMU
target, to give other VCPUs a chance to run. When QEMU sees the
'pause' instruction, it will yeild the execution to other CPUs.

Signed-off-by: Miao Yan <yanmiaobest@gmail.com>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
2015-08-05 08:42:38 -06:00
Bin Meng
1ed6648be0 x86: Reserve PCIe ECAM address range in the E820 table
We should mark PCIe ECAM address range in the E820 table as reserved
otherwise kernel will not attempt to use ECAM.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:25 -06:00
Bin Meng
9830d2ebb4 x86: qemu: Turn on PCIe ECAM address range decoding on Q35
Turn on PCIe ECAM address range decoding on Q35.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:25 -06:00
Bin Meng
a8ebf283e9 x86: qemu: Enable writing MP table
Enable writing MP table for QEMU boads (i440fx and q35).

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:25 -06:00
Bin Meng
c77b8912d8 x86: Allow cpu-x86 driver to be probed for UP
Currently cpu-x86 driver is probed only for SMP. We add the same
support for UP when there is only one cpu node in the deive tree.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:25 -06:00
Bin Meng
e7cd070da6 x86: qemu: Enable I/O APIC chip select on PIIX3
The PIIX3 chipset does not integrate an I/O APIC, instead it supports
connecting to an external I/O APIC which needs to be enabled manually.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:24 -06:00
Bin Meng
53832bb8d6 x86: mpspec: Move writing ISA interrupt entry after PCI
On some platforms the I/O APIC interrupt pin#0-15 may be connected
to platform pci devices' interrupt pin. In such cases the legacy ISA
IRQ is not available so we should not write ISA interrupt entry if
it is already occupied.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:24 -06:00
Bin Meng
abab912813 x86: mpspec: Allow platform to determine how PIRQ is connected to I/O APIC
Currently during writing MP table I/O interrupt assignment entry, we
assume the PIRQ is directly mapped to I/O APIC INTPIN#16-23, which
however is not always the case on some platforms.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:24 -06:00
Bin Meng
a277194341 x86: Convert to use driver model pci on queensbay/crownbay
Move to driver model pci for Intel queensbay/crownbay.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-28 10:36:24 -06:00
Bin Meng
6fc0e8a1fa x86: pci: Do not assign irq 0 to pci device
IRQ 0 is reserved and should not be assigned to pci device.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:22 -06:00
Bin Meng
31a2dc6955 x86: pci: Assign pci irqs to all functions
We need walk through all functions within a PCI device and assign
their IRQs accordingly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:22 -06:00
Bin Meng
93f8a31186 x86: Enable DM RTC support for all x86 boards
Add a RTC node in the device tree to enable DM RTC support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
(Squashed in 'x86: Fix RTC build error on ivybridge')
2015-07-28 10:36:22 -06:00
Bin Meng
8ba25eec86 x86: Change pci option rom area MTRR setting to cacheable
Turn on cache on the pci option rom area to improve the performance.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:22 -06:00
Bin Meng
3ccd49cab4 x86: Simplify architecture defined exception handling in irq_llsr()
Instead of using switch..case for architecture defined exceptions,
simply unify the handling by printing a message of exception name,
followed by registers dump then halt the CPU.

With this unification, it also fixes the wrong exception numbers
for #MF/#AC/#MC/#XM which should be 16/17/18/19 not 15/16/17/18.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:21 -06:00
Bin Meng
013cf483c9 x86: Display correct CS/EIP/EFLAGS when there is an error code
Some exceptions cause an error code to be saved on the current stack
after the EIP value. We should extract CS/EIP/EFLAGS from different
position on the stack based on the exception number.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-28 10:36:21 -06:00
Masahiro Yamada
b0c8f4a797 Kill unneeded #include <linux/kconfig.h>
Because the top-level Makefile forces all the source files
to include include/linux/kconfig.h (see the UBOOTINCLUDE define),
these includes are redundant.

By the way, there are exceptions for the statement above; host
programs.  In fact, host tools in U-Boot depend on a particular
board configuration, although I think they should not.  So, some
files still include <linux/config.h> to work around build errors
on host tools.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-27 15:02:12 -04:00
Masahiro Yamada
5f7e310467 x86: delete unneeded declarations of disable_irq() and enable_irq()
These two declarations in arch/x86/include/asm/interrupt.h conflict
with ones in include/linux/compat.h, so x86 boards cannot include
<linux/compat.h>.

The comment /* arch/x86/lib/interrupts.c */ is bogus now, and we do
not see any definitions of disable_irq() and enable_irq() in there.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-22 07:30:31 -06:00
Simon Glass
b9da5086b8 dm: x86: baytrail: Correct PCI region 3 when driver model is used
Commit afbbd413a fixed this for non-driver-model. Make sure that the driver
model code handles this also.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-14 18:03:19 -06:00
Simon Glass
b71f9dca89 dm: x86: minnowmax: Move PCI to use driver model
Adjust minnowmax to use driver model for PCI. This requires adding a device
tree node to specify the ranges, removing the board-specific PCI code and
ensuring that the host bridge is configured.

Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:19 -06:00
Simon Glass
945cae79e1 x86: pci: Tidy up the generic x86 PCI driver
This driver should use the x86 PCI configuration functions. Also adjust its
compatible string to something generic (i.e. without a vendor name).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
2015-07-14 18:03:19 -06:00
Bin Meng
a452002259 x86: Configure VESA parameters before loading Linux kernel
Store VESA parameters to Linux setup header so that vesafb driver
in the kernel could work.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Jian Luo <jian.luo4@boschrexroth.de>
2015-07-14 18:03:19 -06:00
Bin Meng
9e3a7c9bac x86: Remove MARK_GRAPHICS_MEM_WRCOMB
MARK_GRAPHICS_MEM_WRCOMB is not referenced anywhere in the code,
hence remove it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Bin Meng
786a08e0dd x86: Move VGA option rom macros to Kconfig
Move X86_OPTION_ROM_FILE & X86_OPTION_ROM_ADDR to arch/x86/Kconfig
and rename them to VGA_BIOS_FILE & VGA_BIOS_ADDR which depend on
HAVE_VGA_BIOS. The new names are consistent with other x86 binary
blob options like HAVE_FSP/FSP_FILE/FSP_ADDR.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Bin Meng
df07d91956 x86: cmd_mtrr: Improve MTRR list information
Print the meaningful base address and mask of an MTRR range without showing
the memory type encoding or valid bit.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Bin Meng
92587b364b x86: queensbay: Change CPU_ADDR_BITS to 32
Per CPUID:80000008h result, the maximum physical address bits of
TunnelCreek processor is 32 instead of default 36. This will fix
the incorrect decoding of MTRR range mask.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Bin Meng
43dd22f5fc x86: Setup fixed range MTRRs for legacy regions
We should setup fixed range MTRRs for some legacy regions like VGA
RAM and PCI ROM areas as uncacheable. Note FSP may setup these to
other cache settings, but we can override this in x86_cpu_init_f().

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Jian Luo
1441d81a79 x86: bios: Allow pci config read/write to host bridge in int1a_handler
We should allow pci config read/write to host bridge (b.d.f = 0.0.0)
in the int1a_handler() which is a valid pci device.

Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Jian Luo
7b5c349890 x86: bios: Synchronize stack between real and protected mode
PCI option rom may use different SS during its execution, so it is not
safe to assume esp pointed to the same location in the protected mode.

Signed-off-by: Jian Luo <jian.luo4@boschrexroth.de>
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:18 -06:00
Bin Meng
cdb6babec6 x86: queensbay: Change PCIe root ports' interrupt routing
So far interrupt routing works pretty well for any on-chip devices
on Intel Crown Bay. When inserting any PCIe card to any PCIe slot,
Linux kernel is smart enough to do interrupt swizzling and figure
out device's irq using its parent bridge's interrupt routing info
all the way up to its root port. In U-Boot all PCIe root ports'
interrupts were routed to PIRQ E/F/G/H before, while actually all
PCIe downstream ports received INTx are routed to PIRQ A/B/C/D
directly and not configurable. Now we change this mapping so that
any external PCIe device can work correctly.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
07545d861c x86: Generate a valid MultiProcessor (MP) table
Implement write_mp_table() to create a minimal working MP table.
This includes an MP floating table, a configuration table header
and all of the 5 base configuration table entries. The I/O interrupt
assignment table entry is created based on the same information used
in the creation of PIRQ routing table from device tree. A check
duplicated entry logic is applied to prevent writing multiple I/O
interrupt entries with the same information.

Use a Kconfig option GENERATE_MP_TABLE to tell U-Boot whether we
need actually write the MP table at the F seg, just like we did for
PIRQ routing and SFI tables. With MP table existence, linux kernel
will switch to I/O APIC and local APIC to process all the peripheral
interrupts instead of 8259 PICs. This takes full advantage of the
multicore hardware and the SMP kernel.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
7f5df8d42d x86: Add MultiProcessor (MP) table APIs
The MP table provides a way for the operating system to support
for symmetric multiprocessing as well as symmetric I/O interrupt
handling with the local APIC and I/O APIC. We provide a bunch of
APIs for U-Boot to write the floating table, configuration table
header as well as base and extended table entries.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
a2d73fdba6 x86: Remove inline for lapic access routines
Remove inline for lapic access routines and expose lapic_read()
& lapic_write() as APIs to read/write lapic registers. Also move
stop_this_cpu() to mp_init.c as it has nothing to do with lapic.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
3d23287828 x86: Add I/O APIC register access routines
I/O APIC registers are addressed indirectly. Add io_apic_read() and
io_apic_write() routines to help register access. Two macros for I/O
APIC ID and version register offset are also added.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
ba9091f55d x86: Clean up ioapic header file
Remove all the dead/unused macros from asm/ioapic.h.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
df81749db7 x86: Reduce PIRQ routing table size
There is no need to populate multiple irq info entries with the same
bus number and device number, but with different interrupt pin. We
can use the same entry to store all the 4 interrupt pin (INT A/B/C/D)
routing information to reduce the whole PIRQ routing table size.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
8c38e4d0b8 x86: Ignore function number when writing PIRQ routing table
In fill_irq_info() pci device's function number is written into
the table, however this is not really necessary. The function
number can be anything as OS doesn't care about this field,
neither does the PIRQ routing specification. Change to always
writing 0 as the function number.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
9c235436a3 x86: Write correct bus number for the irq router
We should write correct bus number to the PIRQ routing table for the
irq router from device tree, instead of hard-coded zero.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:17 -06:00
Bin Meng
d402f922b2 x86: queensbay: Correct Topcliff device irqs
There are 4 usb ports on the Intel Crown Bay board, 2 of which are
connected to Topcliff usb host 0 and the other 2 connected to usb
host 1. USB devices inserted in the ports connected to usb host 1
cannot get detected due to wrong IRQ assigned to the controller.
Actually we need apply the PCI interrupt pin swizzling logic to all
devices on the Topcliff chipset when configuring the PIRQ routing.

This was observed on usb ports, but device 6 and 10 irqs are also
wrong. Correct them all together.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:16 -06:00
Bin Meng
b0014b6423 x86: crownbay: Enable DM RTC support
Add a RTC node in the device tree to enable DM RTC support.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:16 -06:00
Bin Meng
990acd0d51 x86: crownbay: Add MP initialization
Intel Crown Bay board has a TunnelCreek processor which supports
hyper-threading. Add /cpus node in the crownbay.dts and enable
the MP initialization.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
(modified to remove error:
   overriding the value of OF_CONTROL. Old value: "y", new value: "y")
2015-07-14 18:03:16 -06:00
Bin Meng
63d54a6705 x86: Clean up lapic codes
This commit cleans up the lapic codes:
- Delete arch/x86/include/asm/lapic_def.h, and move register and bit
  defines into arch/x86/include/asm/lapic.h
- Use MSR defines from msr-index.h in enable_lapic() and disable_lapic()
- Remove unnecessary stuff like NEED_LAPIC, X86_GOOD_APIC and
  CONFIG_AP_IN_SIPI_WAIT
- Move struct x86_cpu_priv defines to asm/arch-ivybridge/bd82x6x.h, as
  it is not apic related and only used by ivybridge
- Fix coding convention issues

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:16 -06:00
Bin Meng
61788e468e x86: Move lapic_setup() call into init_bsp()
Currently lapic_setup() is called before calling mp_init(), which
then calls init_bsp() where it calls enable_lapic(), which was
already enabled in lapic_setup(). Hence move lapic_setup() call
into init_bsp() to avoid the duplication.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:16 -06:00
Bin Meng
6e6f4ce4f8 x86: Move MP initialization codes into a common place
Most of the MP initialization codes in arch/x86/cpu/baytrail/cpu.c is
common to all x86 processors, except detect_num_cpus() which varies
from cpu to cpu. Move these to arch/x86/cpu/cpu.c and implement the
new 'get_count' method for baytrail and cpu_x86 drivers. Now we call
cpu_get_count() in mp_init() to get the number of CPUs.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:16 -06:00
Bin Meng
946c2b5259 x86: ivybridge: Remove SMP from CPU_SPECIFIC_OPTIONS
Ivybridge is not ready for U-Boot MP initialization yet.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:16 -06:00
Bin Meng
4c71322b41 x86: kconfig: Fix minor nits in MAX_CPUS
Move MAX_CPUS definition after SMP so that it shows below SMP in the
menuconfig. Also replace the leading spaces in the MAX_CPUS section
with tabs to conform coding standard.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Bin Meng
063374d2f6 x86: kconfig: Make MAX_CPUS and AP_STACK_SIZE depend on SMP
MAX_CPUS and AP_STACK_SIZE are only meaningful when SMP is on.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Bin Meng
be3f06bcc4 x86: dm: Clean up cpu drivers
This commit does the following to clean up x86 cpu dm drivers:
- Move cpu_x86 driver codes from arch/x86/cpu/cpu.c to a dedicated
  file arch/x86/cpu/cpu_x86.c
- Rename x86_cpu_get_desc() to cpu_x86_get_desc() to keep consistent
  naming with other dm drivers
- Add a new cpu_x86_bind() in the cpu_x86 driver which does exactly
  the same as the one in the intel baytrail cpu driver
- Update intel baytrail cpu driver to use cpu_x86_get_desc() and
  cpu_x86_bind()

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Bin Meng
aefaff8ed8 x86: fsp: Move FspInitEntry call to board_init_f()
The call to FspInitEntry is done in arch/x86/lib/fsp/fsp_car.S so far.
It worked pretty well but looks not that good. Apart from doing too
much work than just enabling CAR, it cannot read the configuration
data from device tree at that time. Now we want to move it a little
bit later as part of init_sequence_f[] being called by board_init_f().
This way it looks and works better in the U-Boot initialization path.

Due to FSP's design, after calling FspInitEntry it will not return to
its caller, instead it jumps to a continuation function which is given
by bootloader with a new stack in system memory. The original stack in
the CAR is gone, but its content is perserved by FSP and described by
a bootloader temporary memory HOB. Technically we can recover anything
we had before in the previous stack, but that is way too complicated.
To make life much easier, in the FSP continuation routine we just
simply call fsp_init_done() and jump back to car_init_ret() to redo
the whole board_init_f() initialization, but this time with a non-zero
HOB list pointer saved in U-Boot's global data so that we can bypass
the FspInitEntry for the second time.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Tested-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Bin Meng
002610f620 x86: fsp: Load GDT before calling FspInitEntry
Currently the FSP execution environment GDT is setup by U-Boot in
arch/x86/cpu/start16.S, which works pretty well. But if we try to
move the FspInitEntry call a little bit later to better fit into
U-Boot's initialization sequence, FSP will fail to bring up the AP
due to #GP fault as AP's GDT is duplicated from BSP whose GDT is
now moved into CAR, and unfortunately FSP calls AP initialization
after it disables the CAR. So basically the BSP's GDT still refers
to the one in the CAR, whose content is no longer available, so
when AP starts up and loads its segment register, it blows up.

To resolve this, we load GDT before calling into FspInitEntry.
The GDT is the same one used in arch/x86/cpu/start16.S, which is
in the ROM and exists forever.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Tested-by: Simon Glass <sjg@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Bin Meng
343fb99064 x86: Add Kconfig options to be used by arch/x86/cpu/config.mk
Add RESET_SEG_START, RESET_SEG_SIZE and RESET_VEC_LOC Kconfig options
and make arch/x86/cpu/config.mk use these options.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Tested-by: Simon Glass <sjg@chromium.org>
2015-07-14 18:03:15 -06:00
Joe Hershberger
c9bb942e2f Move default y configs out of arch/board Kconfig
Some archs/boards specify their own default by pre-defining the config
which causes the Kconfig system to mix up the order of the configs in
the defconfigs... This will cause merge pain if allowed to proliferate.

Remove the configs that behave this way from the archs.

A few configs still remain, but that is because they only exist as
defaults and do not have a proper Kconfig entry. Those appear to be:

SPIFLASH
DISPLAY_BOARDINFO

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
[trini: rastaban, am43xx_evm_usbhost_boot, am43xx_evm_ethboot updates,
drop DM_USB from MSI_Primo81 as USB_MUSB_SUNXI isn't converted yet to DM]
Signed-off-by: Tom Rini <trini@konsulko.com>
2015-06-25 22:17:55 -04:00
Gabriel Huau
5318f18d2c x86: gpio: add pinctrl support from the device tree
Every pin can be configured now from the device tree. A dt-bindings
has been added to describe the different property available.

Change-Id: I1668886062655f83700d0e7bbbe3ad09b19ee975
Signed-off-by: Gabriel Huau <contact@huau-gabriel.fr>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:32:08 -06:00
Andrew Bradford
afbbd413a3 x86: baytrail: pci region 3 is not always mapped to end of ram
Baytrail physically maps the first 2 GB of SDRAM from 0x0 to 0x7FFFFFFF
and additional SDRAM is mapped from 0x100000000 and up.  There is a
physical memory hole from 0x80000000 to 0xFFFFFFFF for other uses.
Because of this, PCI region 3 should only try to use up to the amount of
SDRAM or 0x80000000, which ever is less.

Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:03:18 -06:00
Bin Meng
5c564226fc x86: qemu: Implement PIRQ routing
Support QEMU PIRQ routing via device tree on both i440fx and q35
platforms. With this commit, Linux booting on QEMU from U-Boot
has working ATA/SATA, USB and ethernet.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:03:18 -06:00
Bin Meng
f2653e8dd9 x86: coreboot: Control I/O port 0xb2 writing via device tree
Writing 0xcb to I/O port 0xb2 (Advanced Power Management Control) causes
U-Boot to hang on QEMU q35 target. We introduce a config option in the
device tree "u-boot,no-apm-finalize" under /config node if we don't want
to do that.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:03:18 -06:00
Bin Meng
683b09d783 x86: qemu: Create separate i440fx and q35 device trees
Although the two qemu-x86 targets (i440fx and q35) share a lot in
common, they still have something that cannot easily handled in one
single device tree). Split to create two dedicated device tree files
and make the i440fx be the default build target.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:03:18 -06:00
Bin Meng
65cdd9be3e x86: coreboot: Fix cosmetic issues
Clean up arch/x86/cpu/coreboot.c to fix several cosmetic issues.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:03:17 -06:00
Bin Meng
d04e30b839 x86: kconfig: Make FSP_TEMP_RAM_ADDR depend on HAVE_FSP
FSP_TEMP_RAM_ADDR should only be visible when HAVE_FSP is on.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 03:03:17 -06:00
Bin Meng
4be2f42bbc x86: qemu: Adjust VGA initialization
As VGA option rom needs to run at C segment, although QEMU PAM emulation
seems to only guard E/F segments, for correctness, move VGA initialization
after PAM decode C/D/E/F segments.

Also since we already tested QEMU targets to differentiate I440FX and Q35
platforms, change to locate the VGA device via hardcoded b.d.f instead of
dynamic search for its vendor id & device id pair.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:40 -06:00
Bin Meng
0fcb7acf67 x86: qemu: Enable legacy IDE I/O ports decode
QEMU always decode legacy IDE I/O ports on PIIX chipset. However Linux ata_piix
driver does sanity check to see whether legacy ports decode is turned on.
To make Linux ata_piix driver happy, turn on the decode via IDE_TIMING register.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Bin Meng
cc7debc719 x86: qemu: Turn on legacy segments decode
By default the legacy segments C/D/E/F do not decode to system RAM.
Turn on the decode via Programmable Attribute Map (PAM) registers
so that we can write configuration tables in the F segment.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Andrew Bradford
1dc03c2639 x86: fsp_support: Correct high mem comment typo
High mem starts at 4 GiB.

Signed-off-by: Andrew Bradford <andrew.bradford@kodakalaris.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Bin Meng
67b24970ce x86: Do sanity test on pirq table before writing
If pirq_routing_table points to NULL, that means U-Boot fails to
generate the table before in create_pirq_routing_table(), so we
test it against NULL before actually writing it.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Bin Meng
05b98ec346 x86: quark: Implement PIRQ routing
Intel Quark SoC has the same interrupt routing mechanism as the
Queensbay platform, only the difference is that PCI devices'
INTA/B/C/D are harcoded and cannot be changed freely.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00
Bin Meng
9c7dea602e x86: Refactor PIRQ routing support
PIRQ routing is pretty much common in Intel chipset. It has several
PIRQ links (normally 8) and corresponding registers (either in PCI
configuration space or memory-mapped IBASE) to configure the legacy
8259 IRQ vector mapping. Refactor current Queensbay PIRQ routing
support using device tree and move it to a common place, so that we
can easily add PIRQ routing support on a new platform.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-06-04 02:39:39 -06:00