dc50b5bdf5
beagle: add nand partition and boot
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-05 10:37:17 +01:00
3b4fdb58c0
at91sam9: drop AT91_BASE_SYS for sdram controller
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-05 10:26:49 +01:00
168b2630e2
ARM AT91: switch at91sam9 to barebox_arm_entry part1
...
This switches the at91sam926x, 9g10 and 9g20 over to barebox_arm_entry.
For these SoCs we currently support reading back the memory size from
the SDRAM controller, so all of these can have a common reset() function.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-02-04 15:52:39 +01:00
af7e02951e
ARM raspberrypi: switch to barebox_arm_entry
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
560c141935
ARM clep7212: switch to barebox_arm_entry
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
0056cd78fc
ARM netx boards: switch to barebox_arm_entry
...
Only one board supported, the nxdb500. Uses hardcoded SDRAM settings.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
5dbfea2186
ARM versatile boards: switch to barebox_arm_entry
...
Only one board, the qemu based Versatile/PB. Uses hardcoded SDRAM settings.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
a6271e0c2a
ARM nomadik boards: switch to barebox_arm_entry
...
Only one board, the nhk8815. This uses hardcoded SDRAM values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
02836ae3dd
ARM tegra boards: switch to barebox_arm_entry
...
Only one board, Toshiba AC100. This uses hardcoded SDRAM values.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
b7e7def623
ARM ep93xx boards: switch to barebox_arm_entry
...
This architecture is a bit strange. It has up to four SDRAM banks, but
all have a quite limited size. The SDRAM size for the different boards
currently is unknown as it's configurable with Kconfig. We use a SDRAM
size based on the value of the only board we have in the defconfigs:
edb9301. This likely breaks other ep93xx boards.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
bf61adb050
ARM PXA boards: switch to barebox_arm_entry
...
All boards use hardcoded base addresses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
94c06f9447
ARM Samsung boards: switch to barebox_arm_entry
...
All Samsung boards automatically detect their SDRAM size. The size detection
code can't be called safely from lowlevel C code, so instead the minimum SDRAM
size is guessed from the defconfig files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
1c240cd234
ARM OMAP boards: switch to barebox_arm_entry
...
All boards use hardcoded SDRAM addresses, copied from the board init file.
OMAP3 boards are a bit special, they had a SoC specific reset() function. This
is renamed to omap3_invalidate_dcache() and called from the board lowlevel init
code now.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
c984f8cfa0
ARM MXS boards: switch to barebox_arm_entry
...
All boards use hardcoded SDRAM addresses, copied from the board init file.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
f2a8e35898
ARM i.MX boards: switch to barebox_arm_entry
...
Most i.MX boards can use the imx*_barebox_entry functions. The remaining
(i.MX21, i.MX6) use hardcoded base addresses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:39 +01:00
ce2b453a79
ARM i.MX: Use SRAM stack in lowlevel code
...
Several i.MX boards setup a temporary stack in their lowlevel code.
Instead of using STACK_BASE use a stack in internal SRAM to get rid
of the STACK_BASE compile time dependency.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 15:52:38 +01:00
cfb14ce242
Merge branch 'for-next/omap'
2013-02-04 15:49:07 +01:00
9c5172fac2
Merge branch 'for-next/imx-usb-chipidea'
2013-02-04 15:48:53 +01:00
265e6da19d
Merge branch 'for-next/imx'
2013-02-04 15:48:53 +01:00
22e2544809
Merge branch 'for-next/compile-log-level'
...
Conflicts:
drivers/usb/host/ehci-hcd.c
2013-02-04 15:48:51 +01:00
1b575024f6
Merge branch 'for-next/at91'
...
Conflicts:
arch/arm/boards/at91rm9200ek/init.c
arch/arm/boards/pm9263/init.c
arch/arm/configs/at91sam9n12ek_defconfig
arch/arm/mach-at91/Kconfig
2013-02-04 15:48:43 +01:00
ab5418b570
sama5d3k: the nand flash is 4 bit ecc capable so use it
...
this will require to update the bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 09:49:56 +01:00
8b30a67cab
usb-a926x: only provide the resource if the driver is enable
...
usefull for bootstrap
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-02-04 09:45:33 +01:00
13b0a5a271
defenv-2: migrate guf-vincell to config-board
...
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:21:23 +01:00
4bd5ceee72
at91sam9261ek: add first stage support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-31 19:14:07 +01:00
2754a114ba
at91sam9261ek: add boostrap support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-31 19:13:58 +01:00
dc2da4fef1
at91sam9261ek: add spi support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-31 19:13:45 +01:00
7e30422d72
sama5d3xek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:07:46 +01:00
6858e091df
at91sam9n12ek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:07:46 +01:00
a856d8d582
at91sam9x5ek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-31 19:05:50 +01:00
7eed7b91c3
ARM OMAP: use SZ_*M constants in RAM device register functions
...
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-30 22:21:11 +01:00
a719d7c445
ARM: at91: Add Telit EVK-PRO3 board support
...
http://www.telit.com
Based on at91sam9260ek board support.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-30 16:02:33 +01:00
21535815bf
at91: add sama5d3xek board support
...
currently missing the GMAC support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2013-01-30 08:24:48 +01:00
4db0a48aec
Merge branch 'pu/omap' into for-next/omap
2013-01-29 23:19:50 +01:00
13ecb8a8f4
at91sam9m10ihd: set missing lcd power control
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 11:44:53 +01:00
f7e3126619
macb: allow to pass the phy interface
...
as we will add later the GMAC IP verion support (GEM)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 11:44:49 +01:00
b043950ccc
ARM: efika-mx-smartbook: clean up whitespaces
...
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 10:01:39 +01:00
75536f898b
ARM am33xx beaglebone: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 09:46:22 +01:00
2f9a2bf635
ARM omap3 omap3evm: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 08:48:28 +01:00
8acd8a37f6
ARM omap3 omap343xdsp: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 08:46:23 +01:00
52e321255c
ARM omap3 phycard-a-l1: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 08:42:50 +01:00
4b789b49e0
ARM omap3 beagle: move lowlevel code to lowlevel.c
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-29 08:42:26 +01:00
bfa778fde3
at91sam9263ek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
227dae0c72
at91sam9261ek: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
9d8cef4687
at91sam9m10ihd: add lcd support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
6d8a951667
at91sam9m10g45ek: add lcdc support
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:39 +01:00
c6e7320b12
at91rm9200ek: auto detect sdram size
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:45:37 +01:00
8d5faa862c
at91rm9200ek: fix mem size
...
we have only 32MiB of sdram
by luck it was working
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-28 09:44:47 +01:00
1e8c9c5a4a
at91sam9x5ek: fix wp_pin and detect_pin pin invalid value
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-27 21:28:19 +01:00
d32063d8ab
at91sam9n12: fix wp_pin invalid value
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2013-01-27 21:28:19 +01:00
Jean-Christophe PLAGNIOL-VILLARD
Sascha Hauer
Michael Olbrich
Antony Pavlov
Fabio Porcedda