While a set bit enables the pullup (if exists) it disables the bitkeeper (if
exists). Both features are using the same register bit and only one of this
feature is present on a per pin base.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We have the following in the tree:
|commit af42feb9d2
|Author: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
|Date: Mon Jan 2 11:49:17 2012 +0100
|
| ARM: set SCTRL[A] only when architecture does not support unaligned access
|
| Recent gcc generates code with unaligned access when architecture
| supports it. Setting A bit unconditionally causes data-aborts on such
| code rendering barebox unusable.
|
| Signed-off-by: Enrico Scholz <enrico.scholz@sigma-chemnitz.de>
| Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
What the patch tried is correct: We should set the A bit only when the architecture
does not support unaligned accesses. To figure out whether the architecture supports
unaligned accesses the patch tested for the U bit which is wrong. The U bit may be
0 after a reset, so instead of testing for the U bit we have to set it. This can
be done on armv6 and later. All others have the A bit set to trap unaligned accesses.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This image header is used for booting from SPI using the TI User
Boot Loader (UBL).
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Storing the size instead of the resource end in struct resource was
a mistake. 'size' ranges from 0 to UINT[32|64]_MAX + 1 which obviously
leads to problems. 'end' on the other hand will never exceed
UINT[32|64]_MAX. Also this way we can express a iomem region covering
the whole address space.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Since we now can change HCLK and VDDIO, we can now support writing to
OCOTP. Writing is done via a special data register. This is u32, so we
need to fill a temporary buffer when offset or count is not aligned. The
write is also protected by a special device variable.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Will the code more readable, especially since future additions are
planned.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Let's keep the timeout routine in a central place. We will need it more
often when we add write support.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
usbphy initializaion needs to access the power supply and has this
embedded. Refactor to a seperate power.c, since we need other accesses
in the future.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently the watchdog is occupied for system reset. This usage collides with
the dedicated usage of a watchdog. This patch change the behaviour of at least
i.MX23/i.MX28 where the chipset supports a simple and powerful alternative
to reset the whole SoC (including the PMIC).
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We write a proper FCB, but no DBBT since it is unresolved how to keep it
in sync with Linux-based BBTs. Also, we imply searchcount = 4 and stride
= 64 (which is the default) until we can verify via ocotp.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Based on the U-Boot version. Changed to kernel style register layout, added
MX23 support (WIP!), made MMU aware and adapted to barebox.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Based on the U-Boot version. Changed to kernel style register layout, added
MX23 support, made MMU aware and adapted to barebox.
Signed-off-by: Marek Vasut <marek.vasut@gmail.com>
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To avoid getting a different divider due to rounding errors when using
set_hclk later, use DIV_ROUND_UP for the returned value.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This change is necessary because valid source argument for the clko command
can be negative.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
dma_alloc() allocates memory aligned to cache lines. We have to use
cache line aligned buffers if a driver calls dma_inv_range on the
buffer.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch add dma_alloc to existing dma-mapping.h. On nios the mem is
aligned to D_ACHE_LINE_SIZE.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Some drivers call dma_inv_range() on buffers, on arm these buffers must
be cache line aligned. This patch introduces a generic dma_alloc,
dma_free. Archs can implement in their own functions in "asm/dma.h" and add a:
#define dma_alloc dma_alloc
#define dma_free dma_free
On all other archs the generic versions, which translate into xmalloc
and free are used.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for ConnectCore® i.MX51 board from Digi International.
A separate option includes support for debugging board for this module.
Some code taken from the bootloader U-Boot and patch from Digi.
Functional of Ethernet not tested yet.
barebox 2012.05.0-00316-g4024d9c-dirty #0 Wed Jun 6 13:08:25 MSK 2012
Board: ConnectCore i.MX51
Module Variant: i.MX515@600MHz, PHY, Acceleromter (0x0b)
Module HW Rev : 02
Module Serial : B111156789
mc13xxx-spi@mc13xxx-spi0: Found MC13892 ID: 0x0045d0 [Rev: 2.0a]
NAND device: Manufacturer ID: 0x2c, Chip ID: 0xda (Micron NAND 256MiB 3,3V 8-bit)
Bad block table found at page 131008, version 0x01
Bad block table found at page 130944, version 0x01
nand_read_bbt: Bad block at 0x00ce0000
nand_read_bbt: Bad block at 0x05bc0000
nand_read_bbt: Bad block at 0x0bc40000
ehci@ehci0: USB EHCI 1.00
detected i.MX51 rev 3.0
imx-esdhc@mci0: registered as mci0
imx-esdhc@mci1: registered as mci1
Malloc space: 0x95f00000 -> 0x97efffff (size 32 MB)
Stack space : 0x95ef8000 -> 0x95f00000 (size 32 kB)
envfs: wrong magic on /dev/env0
no valid environment found on /dev/env0. Using default environment
running /env/bin/init...
Hit any key to stop autoboot: 3
barebox@ConnectCore i.MX51:/
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The 40 KHz frequency value was used to parry
__lshrdi3() error on little-endian MIPS because
the __lshrdi3() function is used in clocksource code.
The true value of the JZ4755's external clock frequency is 24 MHz.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Several boards are getting bigger than their specified maximum binary
size of 256Kb. Enable the TLSF allocator for them which is smaller
than the original dlmalloc. The changed defconfigs are:
eukrea_cpuimx25_defconfig
eukrea_cpuimx35_defconfig
eukrea_cpuimx51_defconfig
usb_a9260_defconfig
usb_a9263_128mib_defconfig
usb_a9263_defconfig
usb_a9g20_128mib_defconfig
usb_a9g20_defconfig
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
To get symbols like __ashrdi3.
Franck started generating these symbols from gcc assembly, which seems
to be the cleaner approach. The simpler approach for now to get additional
symbols is to link in libgcc, which is the same as the kernel does.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Franck Jullien <franck.jullien@gmail.com>
On x86_64 we need CONFIG_PHYS_ADDR_T_64BIT to make the resource sizes
64bit. The kernel has this as a Kconfig variable, but on barebox sandbox
will build with whatever compiler we find, so we can't put it into Kconfig.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We already have a phys_size_t since:
commit 2f05b69256
Author: Renaud Barbier <renaud.barbier@ge.com>
Date: Fri May 11 11:58:13 2012 +0100
linux/types.h: define phys_size_t
Add this definition in preparation for the introduction of the
mpc85xx support.
Signed-off-by: Renaud Barbier <renaud.barbier@ge.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix build due to redefinition of this type.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
In the commit 40492a0c13
(MIPS: add common header file for DEBUG_LL via NS16550)
introduced common DEBUG_LL via NS16550 for MIPS
(see file arch/mips/include/debug_ll_ns16550.h).
In the commit 1cbe2b2c00
(MIPS: XBurst: add Ritmix RZX-50 board support)
the file debug_ll_ns16550.h used in
the file arch/mips/mach-xburst/include/mach/debug_ll.h.
Usage looks like this:
------------------------------------------------
+#ifdef CONFIG_BOARD_RZX50
+#include <mach/debug_ll_jz4755.h>
+#endif
+
+#include <debug_ll_ns16550.h>
------------------------------------------------
So after adding another board (e.g. A320) we will have something like this:
------------------------------------------------
#ifdef CONFIG_BOARD_RZX50
#include <mach/debug_ll_jz4755.h>
#endif
+#ifdef CONFIG_BOARD_A320
+#include <mach/debug_ll_jz4740.h>
+#endif
#include <debug_ll_ns16550.h>
------------------------------------------------
This approach has disadvantage:
* the files mach/debug_ll_jz4740.h and mach/debug_ll_jz4755.h
(they go to arch/mips/arch-xburst) are __BOARD-SPECIFIC__
(not SOC- or mach-specific!); The file mach-xburst/include/mach/debug_ll.h
is outside board directory, but it contains some board related information.
This commit introduce a more suitable solution.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes possible to put a board-specific
header file (e. g. foobar.h) to arch/mips/boards/*/include/board/.
Header file usage:
#include <board/foobar.h>
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We must check pointer to function rather than result.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this allow to save between 100 to 300 bytes
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
with:
- led
- USB Device
- uart
- net
- mmc
- MMU
dfu support
detect it at boot time
if the user button is pressed 5s and the vbus is 1 start the dfu
otherwise the vbus is 1 start usb serial
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Currently, both SDHC clock source is PLL3. We can raise clock
for SDHC driver by change source from PLL3 to PLL2.
Below, is debug ouputs with old and new settings.
Detection (PLL3):
set clock: wanted: 400000 got: 375000
Operation (PLL3):
set clock: wanted: 25000000 got: 18000000
Operation SD4.0 (PLL3):
set clock: wanted: 52000000 got: 27000000
Detection (PLL2):
set clock: wanted: 400000 got: 399639
Operation (PLL2):
set clock: wanted: 25000000 got: 23750000
Operation SD4.0 (PLL2):
set clock: wanted: 52000000 got: 41562500
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
fixes
arch/arm/mach-samsung/Kconfig:95:warning: config symbol defined without type
Until we actually have board support.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Traditionally we call __mmu_cache_flush in early startup. There
is a problem with armv7 and hierarchical caches though, on these
systems __mmu_cache_flush uses the stack. Appearantly this was
seldomly a problem, because most of these systems have a ROM
bootloader which sets up some stack, but on a special i.MX6 system
this failed badly. We should not have to flush caches here. Every
sane system should pass control to the bootloader without stale
entries in the caches *), so it should be a safe assumption that the
cache flush can be removed.
Since __mmu_cache_flush is not called from early code anymore we can
also move it to the regular text section.
Be brave and give it a try.
*) omap3 seems to be a exception to this, but this has a cache flush
in arch_init_lowlevel already
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Added support for CompactFlash cards for PCM970 development board via
PCMCIA window.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Juergen Beisert
Christian Kapeller
Sascha Hauer
Antony Pavlov
Maxime Ripard
Jan Luebbe
Alexey Galakhov
Wolfram Sang
Alexander Shiyan
Marc Kleine-Budde
Jean-Christophe PLAGNIOL-VILLARD