Got this compile warning if MTD_WRITE support isn't set.
drivers/mtd/core.c: In function 'mtd_ioctl':
drivers/mtd/core.c:117:26: warning: unused variable 'ei' [-Wunused-variable]
Add a #ifdef to declaration of variable 'ei' to solve it.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
arch/arm/mach-at91/at91sam9g45_devices.c: In function 'at91_add_device_i2c':
arch/arm/mach-at91/at91sam9g45_devices.c:158:42: error: 'pdata_i2c' undeclared (first use in this function)
arch/arm/mach-at91/at91sam9g45_devices.c:158:42: note: each undeclared identifier is reported only once for each function it appears in
arch/arm/mach-at91/at91sam9g45_devices.c:163:8: error: expected ':' or '...' before ';' token
arch/arm/mach-at91/at91sam9g45_devices.c:166:8: error: expected ':' or '...' before ';' token
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
We now have gpio_request. When we call gpio_direction_output before
registering a led_gpio the gpio will be implicitely requested by the
gpio core. gpio_request in the led core will then fail resulting in
an unregistered LED.
Fix this by removing the call to gpio_direction_output. The LED core
will do this anyway.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Registering a LED can fail. If someone calls led_set for such
a LED no set function will be there. Fail gracefully in this
case.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix display to stdout of allocated addresses.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix size address calculation.
Global variables from <asm/sections.h> which are defined
in linker script *.lds files for end addresses has already
a +1 calculation.
For example:
stext = 0x100 with a size about 0x50 will result a etext = 0x150.
In this case a correct size calculation is (etext - stext) = 0x50.
In function 'request_sdram_region' the end address will be
calculated with (start + size - 1) which result a correct
end address of 0x149 in this example.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Fix include for linkerscript variables like _etext.
Otherwise build with #define DEBUG will fail.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The am33xx hsmmc controller is actually a omap4 type controller which
means that it has a 0x100 offset in the registers.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds the missing ubiformat.c file missing from:
commit 5a29d4aea7
Author: Wolfram Sang <w.sang@pengutronix.de>
Date: Mon Dec 17 16:48:33 2012 +0100
commands: add ubiformat
Imported from mtd-utils and stripped down to needed functionality.
Based on an older version (1.4.5.) since the newer do use MEMWRITE
interfaces which we don't have in barebox (yet).
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Both include/string.h and include/stringlist.h define the c preprocessor macro
__STRING_H. This leads to a compile time error, in case both files are
(indirectly) included.
Rename the macro to __STRINGLIST_H in stringlist.h.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Only the OMAP4 has a register offset of 0x100 in the register space. Fix
this by using the device id mechanism. This became broken when the device
register convenience functions were introduced.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to dump all pin configuration in a nice table
and if the bank/pin is specified the pin details
barebox@Atmel at91sam9x5-ek:/
Pin PIOA PIOB PIOC PIOD
0: [gpio] set [periph A] [gpio] set [periph A]
1: [periph A] [periph A] [gpio] set [periph A]
2: [gpio] set [periph A] [gpio] set [periph A]
3: [gpio] set [periph A] [gpio] set [periph A]
4: [gpio] set [periph A] [gpio] set [gpio] clear
5: [gpio] set [periph A] [gpio] set [gpio] set
6: [gpio] set [periph A] [gpio] set [periph A]
7: [gpio] set [periph A] [gpio] set [periph A]
8: [gpio] set [gpio] set [gpio] set [periph A]
9: [periph A] [periph A] [gpio] set [periph A]
10: [periph A] [periph A] [gpio] set [periph A]
11: [periph A] [gpio] set [gpio] set [periph A]
12: [periph A] [gpio] set [gpio] set [periph A]
13: [periph A] [gpio] clear [gpio] set [periph A]
14: [gpio] set [gpio] clear [gpio] set [gpio] set
15: [periph A] [gpio] set [gpio] set [gpio] set
16: [periph A] [gpio] set [gpio] clear [periph A]
17: [periph A] [gpio] set [gpio] set [periph A]
18: [periph A] [gpio] set [gpio] set [periph A]
19: [periph A] [periph A] [gpio] set [gpio] set
20: [periph A] [periph A] [gpio] clear [gpio] set
21: [gpio] set [periph A] [gpio] clear [gpio] clear
22: [gpio] set [periph A] [gpio] set [periph A]
23: [gpio] set [periph A] [gpio] set [periph A]
24: [gpio] set [periph A] [gpio] set [periph A]
25: [gpio] set [periph A] [gpio] set [periph A]
26: [gpio] set [periph A] [gpio] set [periph A]
27: [gpio] clear [periph A] [gpio] set [periph A]
28: [gpio] set [periph A] [gpio] clear [periph A]
29: [gpio] set [periph A] [gpio] set [periph A]
30: [gpio] set [periph A] [gpio] set [periph A]
31: [gpio] set [periph A] [gpio] set [periph A]
barebox@Atmel at91sam9x5-ek:/
pioA27 configuration
[gpio] clear
multidrive = disable
pullup = disable
degitch = disable
debounce = disable
pulldown = enable
schmitt trigger = enable
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
to select the smc and timer for at91sam9 soc
This will allow to simplify the Makefile
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This will allow to support multiple arch
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
and then register a device
The code is take from linux
drop AT91_BASE_SYS for dbgu
factorise the soc type in the Kconfig but keep the ARCH_ so far
as the device code have the same function accross soc which for now does not
allow us to compile soc together
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
add non AT91_SYS_BASE offset base address define
This will prepare for multi arch support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
so we can drop AT91_BASE_SYS too
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
So we can ensure a gpio is not used for something else
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as d1 pioB18 is used for the one wire too
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
imported from the kernel
this allow to simplify the mux implemtation and will simplify the gpio support
from bare_init or pbl
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Alexander Aring
Jean-Christophe PLAGNIOL-VILLARD
Steffen Trumtrar