Add nandtest command to test nand devices
and display ecc stats at the end of test.
Signed-off-by: Alexander Aring <a.aring@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
- add a usbserial command to enable/disable the serial gadget
- allow dfu and usbserial to cohexist in the same barebox
- add a timeout in u_serial so that we don't get locked if the user
enable usbserial from a UART console but doesn't consume the data
on the usbserial port created on the PC
- remove debug or verbose printf
- tested on i.MX25 & i.MX35 & usb-a926x
Signed-off-by: Eric Bénard <eric@eukrea.com>
Tested-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It makes no sense to check the filename pointer here, because a) we have
already been using it and b) argc has been tested against 1 already, so
argv[1] should not be NULL. So, drop the checks.
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The uimage command superseeds the iminfo command. Unlike
the iminfo command the uimage command can also be used
to verify the data crc on demand and to extract uImages
to files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This switches the bootm code to the new uimage code. Also
bootm can now handle other types of images than uImages.
Currently the only architecture making use of this is
arm which allows to boot zImages, raw images and barebox
images.
I intended to make a more bisectable series from this but
I failed becuase there are many dependencies and no matter
how I tried the patches grew bigger and and bigger. So I
decided to put this all in a single patch.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to execute a program of the host from barebox
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If parameter -v without a crc is used, you got a notice but the crc is
calculated and exit status is 0.
With wrong parameters we should quite with COMMAND_ERROR_USAGE.
Signed-off-by: Jan Weitzel <j.weitzel@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This simplifies the code somewhat. The user visible change here is
that we now ignore the compression specified in the uImage. Instead
we detect the compression type from the data which also means that
we now support lzo compressed uImages.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Using the new uncompress function we can now implement a command which
can uncompress all known compression types. This supplements the unlzo
command.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead, let the user select them manually so that bootm supports
all compression types compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The kernel uncompression functions have a unified API. Switch
to the kernel implementation to unify the different uncompression
APIs. As a bonus the kernel implementation is much smaller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
All handlers used to just relocate the image without any checks, so
we are doomed if we write outside of SDRAM or will overwrite ourselves.
Move the relocation up to the generic part where we have a chance
of catching these issues.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
the uImage should be relocated to load_address. This is handled correctly
in gzip/bzip2 compressed images, but not in uncompressed images. fix this.
Also, when a variable is not used once without casting to another type it
probably means that its type is wrong.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The rests of U-Boots iminfo command are sitting in commands/bootm.c and
are in a nonusable state. Factor it out to its own file and make it work
again.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We never had interrupt support in barebox and we have no plans to
add interrupt support. Even if we do I doubt the current fragments
of irq support are helpful, so remove them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Mount without argument always print a "none" as device name mounted
because entry->parent_device is always NULL.
The problem is the mount function in fs/fs.c. parent_device is
initialized to NULL and never updated. With this patch,
parent_device is set with the mounted device name.
Moreover, the mount function has been modified to print the device
name plus device id using the dev_name function.
Signed-off-by: Franck Jullien <franck.jullien@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This adds basic device tree command support. So far we can
parse a flat device tree (-p), which also stores the tree
in memory, dump it (-d) and free (-f) the internally stored tree.
The chosen node can be updated with barebox bootargs, no other
device tree manipulation is implemented yet.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
rename it to digest_file_window
introduce digest_file to digest a file and digest_file_by_name
where we specify the algo by name
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
needed for multi image support
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
you can choose the initrd via @<num>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
as in barebox the data could be the mapped file or a allocated memory with
just the data (non header)
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
When ubi is deselected the ubi commands are still build and compiling fails
due dependences.
commands/built-in.o: In function `do_ubiattach':
commands/ubi.c:75: undefined reference to `ubi_attach_mtd_dev'
Signed-off-by: Teresa Gámez <t.gamez@phytec.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
If a timeout is specified and expired the command will be executed
by default boot
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Add a helper function for boards to register their memory
devices. This makes the board code smaller and also helps
getting rid of map_base and struct memory_platform_data.
And switch all of the memory to it
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
we keep struct memory_platform_data for now on we will switch off the memories
resources to struct resource
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
it's part of the command and can not be compiled as an other module
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The interface emulates the Linux commands, except that you can
specify a sub area - E.G.:
barebox:/ md5sum /dev/fd0 2M+1M /env/config /env/bin/boot 10+2
61c4c0180b044191d28f27545f43562f /dev/fd0 0x00200000 ... 0x00300000
908b84bcbadd2f263583a65ff31d1cad /env/config 0x00000000 ... 0x000003a7
f23bd15825cc5006cf5f9fd486d82d2d /env/bin/boot 0x0000000a ... 0x0000000c
Adds around 1400 bytes (+ size of digest code) with everything enabled.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Normally the default path to save the environment is /dev/env0. However,
we can't map a file in a fat filesystem to /dev/env0. So if we want to
store the environment in a file in fat we have to make it configurable.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The old way happily removed cdev entries which were no bb dev
at all. Fix this by checking if the given device actually is
a bb device.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The cdev operations are available without the complete file API,
so they are more suitable for internal usage.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
It's good to seperate the code which others can use from commands.
This way other users do not depend on the command being compiled in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Environment variables are only useful in interactive environments.
Make it optional on our way to support a noninteractive barebox.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch makes the USB command optional and makes usb_rescan a
global function. This way we can use USB in noninteractive
environments.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The nand command is for bad block handling which some do not need.
So make it optional, but with default y.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The idea is to panic() when there is no memory available for normal
operation. Exception: code which can consume arbitrary amount of RAM
(example: files allocated in ramfs) must report error instead of panic().
This patch also fixes code which didn't check for NULL from malloc() etc.
Usage: malloc(), memalign() return NULL when out of RAM.
xmalloc(), xmemalign() always return non-NULL or panic().
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
fix this gcc 4.4 warning:
xyzModem.c: In function 'xyzModem_stream_open':
xyzModem.c:564: warning: 'dummy' is used uninitialized in this function
Copied from U-Boot
Signed-off-by: Fabio Porcedda <fabio.porcedda@telit.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The m68k support is compile broken for a long time now and nobody
cared so far. We cannot keep the architecture uptodate with current
development wihtout being able to compile it. It's still in the
archives and can be re-added anytime once somebody cares for.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Last time I used the gpio commands I was somehow confused about the behaviour
of the 'gpio_get_value' command. So, I decided to add some doc for it. Here's
the result.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
The function names do not make it clear what return value
is expected and do not save a single line of code. Put
the code inline and unbreak the wrong checks introduced
with a3c1e5d888.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Eric Bénard <eric@eukrea.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
add -F options to compare to file crc
it's usefull to compare what you flash in a partition
it's selectable by CONFIG_CMD_CRC_CMP
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before we duplicate it between command/bootm.c and scripts/mkimage.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before we duplicate it between common/bootm.c and scripts/mkimage.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow you to create a box style entry
via C API by specifying the type as
struct menu_entry me = {
.display "test",
.type = MENU_ENTRY_BOX,
.box_state = 1,
.action = action_to_run,
}
and via shell
menu -e -a -m <menu> -c <command> [-R] [-b 0|1] -d <description>
menu -e -a -m <menu> -u submenu -d [-b 0|1] <description>
-b with 0 for not selected and 1 for selected
and -c for the command to run when changing state
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
this will allow to automaticaly run an entry if the user do no choice
this is usefull for boot menu as example
with menu -s -m boot -A 3 -d "Auto Boot in"
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
before if you specify id = 0 the next available id will be taken
otherwise fail if already registered now as in linux we use -1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Clients now only have to call menu_add_submenu or menu_add_command_entry
instead of allocating many strings.
This also fixes some problems in the menu code. The priv field in struct
menu_entry was a pointer to struct menu or a pointer to an allocated string.
It was never freed, only had to be freed when it was an allocated string.
The reference to a submenu is now kept as a string and not to the menu
itself. The code checked the existence of the submenu when creating it, but
crashed when the submenu was removed and referenced afterwards. Now the
code hapily allows references to nonexistant menus but complains during
runtime when the menu is not there.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Introduce a menu framework that allow us to create list menu to simplify
barebox and make it more user-frendly
This kind of menu is very usefull when you do not have a keyboard or a
serial console attached to your board to allow you to interract with
barebox
For the develloper part,
The framework introduce two API
1) C
that allow you to create menu, submenu, entry and complex menu action
2) Command
that allow you as the C API to create menu, submenu, entry and complex
menu action but this time the actions will be store in a function and
then be evaluated and excecuted at runtime.
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
With this fix its possible to run loadb -f /dev/ram0
again with the latest next patchstack. Without you will
run into data_abort. Tested with omap3530 beagleboard.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Copy to target directory is supported since commit b36fca0c, circa 2007.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to eth_open/eth_halt the network devices during NetLoopInit
which is called whenever the user enters a network command.
Change this behaviour so that the current network device gets opened
when making it the current one.
With this change it's always possible to send packages and we are able
to implement a new network stack in the next step.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
theses commands allow low level access to i2c bus and can be useful
to setup an i2c device without having to add code, compile and flash
barebox.
Signed-off-by: Eric Bénard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Also, do not allow to continue barebox after returning from the
application since we don't know anything about the state we are in.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This file has no useful things for others than the driver,
so move it next to the driver and remove the corresponding
include from other files.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We claim to be compatible with the kernel's cmdlinepart parser, so
support <size>@<offset> like the kernel does.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Other architectures are supporting the uImage format used by barebox's 'bootm'
command. x86 does'nt. So, we need a special command to be able to boot the
x86 specific bzImage format.
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Based on suggestion from S. Hauer, fix the obvious typo in
commands/Makefile.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Nishanth Menon wrote:
> no signed off by and no diffstat?
Ups.
> can you use git-format-patch to send please? it is easier to review.
Sure. Here it comes:
jbe
------8<---------8<---------8<---------8<---------8<---------8<----
Subject: [PATCH] Some doxygen related fixes:
- fix a few doxygen comments that are used in a wrong way
- move some pages and their content to a better place in the
generated documentation
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
'close()' clobbers the 'errno' value from the erase command. So it must be done
*after* the check for ENOSYS to ingnore it correctly.
Signed-off by: Juergen Beisert <j.beisert@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
No need to check for maximum argument counts. The commands are
safe to be called with more arguments, so lets safe some bytes.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Instead of having a big switch/case for every protocol, do
the right things in the individual functions before callong
NetLoop().
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Return success on -ENOSYS. (un)protecting a device which
is not protectable should not irritate users.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
This patch adds support for USB devices. It uses
the Linux Kernel gadget API. Along with this patch
comes driver support for the Freescale (arc) USB OTG
Core and USB Device Firmware Update (DFU)
The serial gadget support is not working at the moment.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
We used to write the data in nand_bb_write directly to the
NAND flash. If we do not write a whole NAND page at once, this
resulted in multiple writes of one page which corrupted the
ecc data.
Fix this by collecting 4096 bytes of data before actually
writing the data to the flash.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Sascha Hauer
Jean-Christophe PLAGNIOL-VILLARD
Alexander Aring
Eric Bénard
Wolfram Sang
Jan Weitzel
Hubert Feurstein
Franck Jullien
Loïc Minier
Paul Fertser
Teresa Gámez
Antony Pavlov
Peter Korsgaard
Juergen Beisert
Gregory CLEMENT
Krzysztof Halasa
Fabio Porcedda
Robert Schwebel
Michael Grzeschik
Baruch Siach
Uwe Kleine-König
Robert P. J. Day
Sascha Hauer