Jean-Christophe PLAGNIOL-VILLARD
d4a54dfa42
arch/arm/Makefile: cleanup
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03 09:46:09 +01:00
Jean-Christophe PLAGNIOL-VILLARD
bab3a3b976
arm: introduce CPU CONFIG from linux
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-03 09:45:55 +01:00
Jean-Christophe PLAGNIOL-VILLARD
eea19dc488
at91: Atmel Ref board fix config MACH to match with mach-types
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-11-02 14:44:43 +01:00
Jean-Christophe PLAGNIOL-VILLARD
af88baca30
at91: add support for the at91sam9263ek board of Atmel
...
Here is the page on Atmel website:
http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Patrice VILCHEZ <patrice.vilchez@atmel.com>
Cc: Sedji Gaouaou <sedji.gaouaou@atmel.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-11-02 08:31:52 +01:00
Jean-Christophe PLAGNIOL-VILLARD
f6a579da9c
[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-10-22 14:21:25 +02:00
Jean-Christophe PLAGNIOL-VILLARD
9956bdf77d
arm: merge proc-armv/ptrace.h and ptrace.h in one file
...
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-10-22 12:12:48 +02:00
Jean-Christophe PLAGNIOL-VILLARD
81362c2b2a
at91sam9: move to at91
...
this will allow to add at91rm9200 with the same api as done in the kernel
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2009-10-20 15:02:36 +02:00
Sascha Hauer
55e94293d5
add Freescale MX25 3stack board support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-09-08 12:42:56 +02:00
Eric Benard
b2db2e6cd8
Add Eukrea CPUIMX27 support
...
CPUIMX27 is built around Freescale's i.MX27 and has up to 64MB of
NOR Flash, up to 512MB of NAND Flash and up to 256MB of mDDR,
it includes an ethernet PHY in MII mode, an I2C RTC and a
ST16554 QuadUART on nCS3.
Signed-off-by: Eric Benard <eric@eukrea.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-07-16 09:46:34 +02:00
Juergen Beisert
f1ed0ae1c6
Add the basic support for the DIGI a9m2440 CPU card.
...
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 15:58:57 +02:00
Juergen Beisert
27acfbda77
Add the basic support for the DIGI a9m2410 CPU card.
...
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 15:58:48 +02:00
Juergen Beisert
5139e618b8
Add basic architecture support for Samsung's S3C2410 and S3C2440 CPU.
...
It includes a
- driver for the internal UART
- driver for the internal NAND controller
- support to boot from NAND
- PLL handling
- SDRAM initialisation
Signed-off-by: Juergen Beisert <j.beisert@pengutronix.de>
2009-07-01 14:36:40 +02:00
Marc Kleine-Budde
0780441a3f
[mmccpu] add new board: Bucyrus MMC-CPU
...
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2009-05-19 10:21:53 +02:00
Sascha Hauer
a3f20a4545
Arm: remove -msoft-float option
...
This breaks compilation on a hardfloat toolchain as we would need
AFLAGS += -msoft-float aswell. Since we do not use floating point
we can equally well remove the option completely.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-21 16:56:16 +02:00
Sascha Hauer
5151577032
add initial phyCard-i.MX27 support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-14 17:10:07 +02:00
Ivo Clarysse
fcfbd10d3c
Add Freescale i.MX21 support
...
Signed-off-by: Ivo Clarysse <ivo.clarysse@gmail.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-04-07 08:55:04 +02:00
Sascha Hauer
0cb4c4e2a5
imx: Add Phytec Phycore i.MX35 aka PCM043 support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 14:44:46 +01:00
Sascha Hauer
9a252f1ac9
add Support for Freescale MX35 3Stack Board
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2009-02-06 14:44:46 +01:00
Sascha Hauer
0dd24dc17d
add Ronetix pm9263 board support
...
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
2008-08-01 12:16:31 +02:00
Sascha Hauer
8a03bff03e
[arm] Add cleanup flags only when modules are disabled. Otherwise
...
we remove functions from the binary which are needed for
modules
2008-07-03 10:30:44 +02:00
Sascha Hauer
f3351ebd78
add basic at91sam9260 support. Currently only second stage
...
bootloader is supported:
- No SDRAM initialisation
- No UART init / baudrate change
2008-06-06 09:30:32 +02:00
Nishanth Menon
053034d182
010-OMAP-addbase
...
[Patch 10/17] U-Boot-V2:ARM:OMAP3: Add support for OMAP and Cortex A8
This patch adds support for OMAP3 platforms. Mainly to setup the infrastructure.
ARMV7 requires a different I/D cache cleanup code which is introduced in this patch
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
2008-06-05 19:45:28 +02:00
Nishanth Menon
1ecafc5f8d
004-arm-makefile
...
[Patch 04/17] U-Boot-V2:ARM: Remove unwanted flags from Makefile
CFLAGS: "-D __ARM__" should have been "-D__ARM__". this breaks sparse check.
Further -nostdinc in Makefile is redfined by
commit ID:847934bc960ba1588c87e283118318dfdd78d4c0
This is unecessary as NOSTDINC_FLAGS defines it
Signed-off-by: Nishanth Menon<x0nishan@ti.com>
2008-06-05 19:45:14 +02:00
Sascha Hauer
36ffd6f18a
[kbuild] move -pipe from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:54:37 +02:00
Sascha Hauer
39a78d9951
[kbuild] remove -Wall from architecture Makefiles. It's already
...
in toplevel CFLAGS
2008-06-03 12:51:05 +02:00
Sascha Hauer
847934bc96
[kbuild] move -nostdinc from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:39:45 +02:00
Sascha Hauer
b8725ffe1d
[kbuild] move -ffreestanding from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:37:52 +02:00
Sascha Hauer
bca64df501
[kbuild] move -fno-builtin from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:36:35 +02:00
Sascha Hauer
7681d868ba
[kbuild] move -Os flag from architecture Makefiles to toplevel
...
Makefile
2008-06-03 12:29:57 +02:00
Sascha Hauer
878f38de8f
[kbuild] change architecture Makefiles not to overwrite
...
CFLAGS, instead append them to the existing CFLAGS.
Also, remove all double CFLAGS
2008-06-03 12:24:50 +02:00
Menon, Nishanth
22d3dc0d27
[arm] remove unsused sections while linking
2008-05-12 15:52:23 +02:00
Sascha Hauer
7b4e9c4a82
[i.MX]: Basic board support for the Freescale i.MX27 eval board
2008-02-19 15:59:37 +01:00
Marc Kleine-Budde
049063e2ad
remove -isystem with empty argument
...
This patch removes the "-isystem $(gccincdir)" from the
arch/*/Makefile because gccindir is empty.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2007-11-29 20:03:37 +01:00
Marc Kleine-Budde
57bb3cd90d
don't against link libgcc
...
We don't want to link against libgcc.
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2007-11-28 08:21:02 +01:00
Juergen Beisert
a7d96488e5
Using correct board names all over the place
...
Signed-off-by: Juergen Beisert <jbe@pengutronix.de>
2007-11-08 18:23:44 +01:00
sascha
bd8ac3ec63
arch/arm/Makefile: fix proc link creation for external builds
2007-10-17 19:03:38 +02:00
Juergen Beisert
3d1940a4a0
merge sha + jbe
2007-10-17 18:12:33 +02:00
Juergen Beisert
3be8ed2fa1
adding i.MX31 CPU support
2007-10-17 17:57:55 +02:00
sascha
d59ca7feb3
Linking: Remove linker scripts from (arm based-) boards and add
...
a generic linker script to arch/arm/lib/u-boot.lds.S.
If a board wants to overwrite a linker script it can do
so using CONFIG_BOARD_LINKER_SCRIPT.
There is no generic linker script for ppc and blackfin
yet, so still use the board specific one.
2007-10-17 12:21:53 +02:00
Sascha Hauer
514eb64b1a
beginning phycore pcm038 i.MX27 support
2007-10-08 00:13:19 +02:00
Sascha Hauer
153cf7bb6e
add arm specific bits for modules
2007-10-01 09:51:04 +02:00
Sascha Hauer
f5336e27e0
fix netx image name
2007-09-22 16:00:01 +02:00
Sascha Hauer
47d938f7ab
- some more cleanup in Makefiles
...
- move netx image generation to arch/arm/Makefile
2007-09-13 15:33:09 +02:00
Sascha Hauer
a744809b50
add hilscher netx support
2007-09-05 12:52:24 +02:00
Sascha Hauer
ce192d40db
autogenerate include/asm-arm/proc
2007-07-12 11:51:29 +02:00
Sascha Hauer
d163b0dbd4
svn_rev_545
...
linux->uboot
2007-07-05 18:02:03 +02:00
Sascha Hauer
209ebd63fd
svn_rev_495
2007-07-05 18:01:59 +02:00
Sascha Hauer
04dc02f8e4
svn_rev_249
...
remove -ffixed-r8, add -fno-strict-aliasing
2007-07-05 18:01:36 +02:00
Sascha Hauer
b10fe47280
svn_rev_210
...
remove -D CONFIG_ARM
2007-07-05 18:01:33 +02:00
Sascha Hauer
1a02a7e4b0
svn_rev_123
...
add -P option to cpp to remove linue number infos from linker script
2007-07-05 18:01:25 +02:00
Sascha Hauer
4eae36cc43
svn_rev_119
...
remove debug echo
2007-07-05 18:01:24 +02:00
Sascha Hauer
658cc34395
svn_rev_118
...
thousands of things
2007-07-05 18:01:24 +02:00
Sascha Hauer
abfbbad1eb
svn_rev_109
...
do not know anymore
2007-07-05 18:01:23 +02:00
Sascha Hauer
bbe312cba5
svn_rev_076
2007-07-05 18:01:20 +02:00
Sascha Hauer
eff52b8645
svn_rev_071
...
add cleanfiles
2007-07-05 18:01:19 +02:00
Sascha Hauer
5618da1521
svn_rev_048
...
add eco920, add link to config.h
2007-07-05 18:01:17 +02:00
Sascha Hauer
3e83b8358a
svn_rev_021
...
first compile success
2007-07-05 18:01:14 +02:00
Sascha Hauer
6c1e36a9d1
svn_rev_012
2007-07-05 18:01:14 +02:00
Sascha Hauer
56e32343eb
svn_rev_009
...
add autogenerated links
2007-07-05 18:01:13 +02:00
Sascha Hauer
c56078afcc
svn_rev_008
...
add missing Kconfig
2007-07-05 18:01:13 +02:00